Editorial Board for section 'Additive Manufacturing'
- Extractive Metallurgy Section
- Powder Metallurgy Section
- Corrosion and Protection Section
- Biobased and Biodegradable Metals Section
- Metal Casting, Forming and Heat Treatment Section
- Additive Manufacturing Section
- Metal Failure Analysis Section
- Computation and Simulation on Metals Section
- Entropic Alloys and Meta-Metals Section
- Welding and Joining Section
- Structural Integrity of Metals Section
- Metal Matrix Composites Section
- Crystallography and Applications of Metallic Materials Section
- Metallic Functional Materials Section
Please see the section webpage for more information on this section.
Please note that the order in which the Editors appear on this page is alphabetical, and follows the structure of the editorial board presented on the MDPI website under information for editors: editorial board responsibilities.
Members
Department of Applied Science and Technology, Politecnico di Torino, corso Duca degli Abruzzi 24, 10129 Torino, Italy
Interests: additive manufacturing; mainly of light alloys and composites; micro- and nanocomposites; mainly based on Al and Mg
Interests: additive manufacturing; mainly of light alloys and composites; micro- and nanocomposites; mainly based on Al and Mg
Department of Materials Science, University of Virginia, Charlottesville, WV, USA
Interests: magnesium alloy processing–structure–property relationships; low symmetry metal deformation; plasticity; in-situ neutron diffraction
Special Issues, Collections and Topics in MDPI journals
Interests: magnesium alloy processing–structure–property relationships; low symmetry metal deformation; plasticity; in-situ neutron diffraction
Special Issues, Collections and Topics in MDPI journals
CanmetMATERIALS | Natural Resources Canada, 183 Longwood Rd South, Hamilton, ON L8P 0A5, Canada
Interests: transmission electron microscopy; steels; Aluminum alloys; high entropy alloys; precipitation; creep of metals; hydrogen storage; additive manufacturing of metals
Interests: transmission electron microscopy; steels; Aluminum alloys; high entropy alloys; precipitation; creep of metals; hydrogen storage; additive manufacturing of metals
Department of Chemical, Materials and Production Engineering, University of Naples “Federico II”, Naples, Italy
Interests: manufacturing; additive manufacturing; solid state processes; microstructure; cold spray
Special Issues, Collections and Topics in MDPI journals
Interests: manufacturing; additive manufacturing; solid state processes; microstructure; cold spray
Special Issues, Collections and Topics in MDPI journals
Mines ParisTech, Centre de Mise en Forme des Matériaux (CEMEF), UMR CNRS 7635, Sophia Antipolis, France
Interests: finite element modelling of coupled heat transfer/mechanics/metallurgy; thermo-mechanical analysis of two-phase flows (mushy zones) and coupling with transport of chemical species; mumerical simulation of metal processing involving solidification: casting (ingot, continuous casting), arc and laser welding, additive manufacturing; numerical simulation of powder metallurgy processes: powder compaction (hot isostatic pressing, spark plasma sintering)
Interests: finite element modelling of coupled heat transfer/mechanics/metallurgy; thermo-mechanical analysis of two-phase flows (mushy zones) and coupling with transport of chemical species; mumerical simulation of metal processing involving solidification: casting (ingot, continuous casting), arc and laser welding, additive manufacturing; numerical simulation of powder metallurgy processes: powder compaction (hot isostatic pressing, spark plasma sintering)
Department of Mechanical Engineering, Politecnico di Milano, Via La Masa 1, 20156 Milan, Italy
Interests: fatigue; integrity assessment; defects; additive manufacturing; mechanical components; railway components
Interests: fatigue; integrity assessment; defects; additive manufacturing; mechanical components; railway components
National Research Council, Institute of Condensed Matter Chemistry and Technologies for Energy, Via G. Previati 1E, 23900 Lecco, Italy
Interests: National Research Council, Institute of Condensed Matter Chemistry and Technologies for Energy, Via G. Previati 1E, 23900 Lecco, Italy
Special Issues, Collections and Topics in MDPI journals
Interests: National Research Council, Institute of Condensed Matter Chemistry and Technologies for Energy, Via G. Previati 1E, 23900 Lecco, Italy
Special Issues, Collections and Topics in MDPI journals
Laser Hall, LTm Team (Laser Materials Processing), IUT Physical Measurements Department, Université de Bourgogne, 12 rue de la Fonderie, 71200 Le Creusot, France
Interests: WAAM; selective laser melting; laser welding; dissimilar welding; numerical modeling; residual stresses; FEM; process modeling; CFD; MHD; gas flow / electric arc couplings; thermal spray
Interests: WAAM; selective laser melting; laser welding; dissimilar welding; numerical modeling; residual stresses; FEM; process modeling; CFD; MHD; gas flow / electric arc couplings; thermal spray
Walker Department of Mechanical Engineering, The University of Texas at Austin, Austin, TX 78712, USA
Interests: additive manufacturing; powder bed fusion; materials selection; microstructure-property relationships; laser sintering
Special Issues, Collections and Topics in MDPI journals
Interests: additive manufacturing; powder bed fusion; materials selection; microstructure-property relationships; laser sintering
Special Issues, Collections and Topics in MDPI journals
Department of Mechanical Engineering, University of technology of Compiegne, Centre de recherches de Royallieu, Laboratoire Roberval, BP 20529, Rue Roger Couttolenc, CS 60319, 60203 Compiegne CEDEX, France
Interests: study of the relationships between the behavior at the microstructure scale and the macroscopic response of materials; multi-scale analysis of the behavior of structural materials; characterization, modeling and identification of nonlinear behavior, effects on the simulation of shaping processes; modeling of elasto (visco-) plastic behavior and application in the study of rough contact; modeling of the coupled effects of texture and microstructure
Interests: study of the relationships between the behavior at the microstructure scale and the macroscopic response of materials; multi-scale analysis of the behavior of structural materials; characterization, modeling and identification of nonlinear behavior, effects on the simulation of shaping processes; modeling of elasto (visco-) plastic behavior and application in the study of rough contact; modeling of the coupled effects of texture and microstructure
Centre for Additive Manufacturing, School of Engineering, RMIT University, Melbourne, VIC 3000, Australia
Interests: interaction of high power laser radiation with matter leading to changes in state from heating to melting and applications in additive manufacture; joining and surfacing
Special Issues, Collections and Topics in MDPI journals
Interests: interaction of high power laser radiation with matter leading to changes in state from heating to melting and applications in additive manufacture; joining and surfacing
Special Issues, Collections and Topics in MDPI journals
Department of Management and Engineering, University of Padova, Stradella San Nicola 3, 36100 Vicenza, Italy
Interests: precision engineering; manufacturing metrology; advanced manufacturing and industrial computed tomography
Interests: precision engineering; manufacturing metrology; advanced manufacturing and industrial computed tomography
Department of Civil and Environmental Engineering, Technical University of Catalonia-BarcelonaTech, Building C1 Campus Nord, 08034 Barcelona, Spain
Interests: continuum mechanics; computational mechanics; thermo-mechanical processes; advanced manufacturing technologies; additive manufacturing (3D printing); friction stir welding
Special Issues, Collections and Topics in MDPI journals
Interests: continuum mechanics; computational mechanics; thermo-mechanical processes; advanced manufacturing technologies; additive manufacturing (3D printing); friction stir welding
Special Issues, Collections and Topics in MDPI journals
Department of Mechanical and Industrial Engineering, Toronto Metropolitan University, Toronto, ON M5B 2K3, Canada
Interests: mechanical properties; fatigue; fracture; deformation; microstructural characterization; welding and joining; lightweight materials (magnesium alloys, aluminum alloys, titanium alloys); advanced materials (bio- and nano-materials, composites)
Interests: mechanical properties; fatigue; fracture; deformation; microstructural characterization; welding and joining; lightweight materials (magnesium alloys, aluminum alloys, titanium alloys); advanced materials (bio- and nano-materials, composites)
School of Materials Science and Engineering, Beihang University, Beijing 100191, China
Interests: metal additive manufacturing; laser surface engineering; heat treatment; investment casting
Special Issues, Collections and Topics in MDPI journals
Interests: metal additive manufacturing; laser surface engineering; heat treatment; investment casting
Special Issues, Collections and Topics in MDPI journals
TIMET Professor of Advanced Titanium Processing, Department of Materials Engineering, The University of British Columbia, Vancouver Campus, Frank Forward Building, 309-6350 Stores Road, Vancouver, BC Canada V6T 1Z4
Interests: Physical phenomena in non-ferrous casting: hot tearing; Continuous Casting, EB Melting and Refining, Vaccuum Casting; Finite element-based heat flow and stress codes; Optimization of industrial casting processes; Mathematical modeling
Special Issues, Collections and Topics in MDPI journals
Interests: Physical phenomena in non-ferrous casting: hot tearing; Continuous Casting, EB Melting and Refining, Vaccuum Casting; Finite element-based heat flow and stress codes; Optimization of industrial casting processes; Mathematical modeling
Special Issues, Collections and Topics in MDPI journals
Department of Advanced Materials and Technologies, Faculty of Advanced Technologies and Chemistry, Military University of Technology, Gen. S. Kaliskiego 2, 00-908 Warsaw, Poland
Interests: microstructural characterization; nonferrous alloys (Al, Ti, Mg, etc.); intermetallics; additive manufacturing; hydrogen storage
Special Issues, Collections and Topics in MDPI journals
Interests: microstructural characterization; nonferrous alloys (Al, Ti, Mg, etc.); intermetallics; additive manufacturing; hydrogen storage
Special Issues, Collections and Topics in MDPI journals
Medical and Dental Engineering Centre for Research, Design and Production ASKLEPIOS, 12/1 King Jana III Sobieskiego St., 44-100 Gliwice, Poland
Interests: materials engineering; nanotechnology; biomaterials; medical; dental; manufacturing and surface engineering; machine building and automation; management and organization
Special Issues, Collections and Topics in MDPI journals
Interests: materials engineering; nanotechnology; biomaterials; medical; dental; manufacturing and surface engineering; machine building and automation; management and organization
Special Issues, Collections and Topics in MDPI journals
School of Engineering, The University of Newcastle, Callaghan, NSW 22187, Australia
Interests: metallic syntactic foams; material characterization: physical, geometrical, mechanical, thermal, and corrosion; experimental and numerical analysis; manufacturing procedures
Special Issues, Collections and Topics in MDPI journals
Interests: metallic syntactic foams; material characterization: physical, geometrical, mechanical, thermal, and corrosion; experimental and numerical analysis; manufacturing procedures
Special Issues, Collections and Topics in MDPI journals
The School of Mechanical Engineering, The University of Adelaide, Adelaide, SA 5005, Australia
Interests: advanced manufacturing; advanced materials (energy materials, light alloys, steels, metal and intermetallic matrix composites); energy pipeline welding integrity
Special Issues, Collections and Topics in MDPI journals
Interests: advanced manufacturing; advanced materials (energy materials, light alloys, steels, metal and intermetallic matrix composites); energy pipeline welding integrity
Special Issues, Collections and Topics in MDPI journals
Kerttu Saalasti Institute, Future Manufacturing Technologies (FMT), University of Oulu, 85500 Nivala, Finland
Interests: materials processing; mechanical behavior of materials; TWIP/TRIP deformation mechanisms; heat treatment; microstructural evolution; additive manufacturing; fast heating annealing; manufacturing and joining of materials
Special Issues, Collections and Topics in MDPI journals
Interests: materials processing; mechanical behavior of materials; TWIP/TRIP deformation mechanisms; heat treatment; microstructural evolution; additive manufacturing; fast heating annealing; manufacturing and joining of materials
Special Issues, Collections and Topics in MDPI journals
School of Mechanical and Electrical Engineering, China University of Mining and Technology, Xuzhou 221116, China
Interests: metal additive manufacturing; gradient structure; Mg alloy; Ti alloy; steel
Special Issues, Collections and Topics in MDPI journals
Interests: metal additive manufacturing; gradient structure; Mg alloy; Ti alloy; steel
Special Issues, Collections and Topics in MDPI journals
School of Engineering, Technology and Design, Canterbury Christ Church University, Canterbury CT1 1QU, UK
Interests: additive manufacturing (laser powder bed fusion, stereolithography, fused deposition modelling, binder jetting); microfabrication; design of experiments; CAD, FEA, MATLAB; process optimisation; materials processing; metrology and mechanical testing; product development; design for manufacturing; advanced microscopy; X-ray diffraction analysis; image analysis
Special Issues, Collections and Topics in MDPI journals
Interests: additive manufacturing (laser powder bed fusion, stereolithography, fused deposition modelling, binder jetting); microfabrication; design of experiments; CAD, FEA, MATLAB; process optimisation; materials processing; metrology and mechanical testing; product development; design for manufacturing; advanced microscopy; X-ray diffraction analysis; image analysis
Special Issues, Collections and Topics in MDPI journals
Choong Hoon Cho Chair and Professor of Chemical Engineering and Materials Science and Aerospace and Mechanical Engineering, University of Southern California, RTH 502, Los Angeles, CA 90089, USA
Interests: plasticity in metals, including creep, internal stresses, large-strain deformation; additive manufacturing; solid state joining
Interests: plasticity in metals, including creep, internal stresses, large-strain deformation; additive manufacturing; solid state joining
Institute of Strength Physics and Materials Science, Siberian Branch of Russian Academy of Sciences, 634055 Tomsk, Russian
Interests: electron beam additive manufacturing; non-stational local metallurgy; friction; wear; direct energy deposition; friction stir welding; friction stir processing; composite materials
Special Issues, Collections and Topics in MDPI journals
Interests: electron beam additive manufacturing; non-stational local metallurgy; friction; wear; direct energy deposition; friction stir welding; friction stir processing; composite materials
Special Issues, Collections and Topics in MDPI journals
Senior Lecturer (Associate Professor), School of Engineering, University of Limerick, V94 T9PX Limerick, Ireland
Interests: metal plasticity; low cycle fatigue; constitutive modelling; metal additive manufacturing; airworthiness
Special Issues, Collections and Topics in MDPI journals
Interests: metal plasticity; low cycle fatigue; constitutive modelling; metal additive manufacturing; airworthiness
Special Issues, Collections and Topics in MDPI journals
Department of Engineering and Physics, Karlstad University, SE-651 88 Karlstad, Sweden
Interests: additive manufacturing; laser and electron beam powder bed fusion techniques; direct energy deposition; advanced character-ization of microstructure–properties relationship of additively manufactured materials; material design for additive manufac-turing
Special Issues, Collections and Topics in MDPI journals
Interests: additive manufacturing; laser and electron beam powder bed fusion techniques; direct energy deposition; advanced character-ization of microstructure–properties relationship of additively manufactured materials; material design for additive manufac-turing
Special Issues, Collections and Topics in MDPI journals
Engineering and Materials Science, Faculty of Computing, Engineering & the Built Environment, Birmingham City University, Millennium Point, Curzon Street, Birmingham B4 7XG, United Kingdom
Interests: process modelling and optimization; thermomechanical processing; additive manufacturing; tribology and corrosion issues; heat transfer; stress-strain relationships; microstructure evolution and phase transformations
Special Issues, Collections and Topics in MDPI journals
Interests: process modelling and optimization; thermomechanical processing; additive manufacturing; tribology and corrosion issues; heat transfer; stress-strain relationships; microstructure evolution and phase transformations
Special Issues, Collections and Topics in MDPI journals
Scientific Center of Optical and Electron Microscopy (ScopeM), ETH Zürich, CH-8093 Zürich, Switzerland
Interests: microstructure; texture; anisotropy; properties; phase transition; characterization; electron microscopy; EBSD; additive manufacturing
Interests: microstructure; texture; anisotropy; properties; phase transition; characterization; electron microscopy; EBSD; additive manufacturing
Department of Mechanical Engineering, Faculty of Engineering, University of the Basque Country (UPV/EHU), Plaza Torres Quevedo 1, 48013 Bilbao, Bizkaia, Spain
Interests: laser material processing; metal additive manufacturing; laser material deposition; laser process simulation
Special Issues, Collections and Topics in MDPI journals
Interests: laser material processing; metal additive manufacturing; laser material deposition; laser process simulation
Special Issues, Collections and Topics in MDPI journals
