Conferences
Upcoming MDPI Conferences (1)
Online
We are pleased to announce that the 4th International Electronic Conference on Applied Sciences (ASEC2023), chaired by Prof. Dr. Nunzio Cennamo, will be held on https://asec2023.sciforum.net/ from 27 October to 10 November 2023.
ASEC2023 offers you the opportunity to participate in this international, scholarly conference without any concerns of expenditures regarding travel—all you need is your computer and access to the Internet. We would like to invite you to “attend” this conference by presenting your latest work. There is no registration fee. This online conference will make your presentation accessible to hundreds of researchers worldwide, with the active engagement of the audience in question and answer sessions, in addition to discussion groups that will take place online.
The conference is divided into 10 themes. You are welcome to submit your articles to this conference.
A. Applied Biosciences, Chemistry, Materials Science, and Bioengineering;
B. Computing, Internet of Things, and Artificial Intelligence;
C. Electronics, Optoelectronics and Communications Engineering;
D. Electrical and Energy Sciences, Technology, and Mechanical and Aerospace Engineering;
E. Environmental, Civil Engineering, and Earth Sciences;
F. Applied Nanosciences, Sensors, Instrumentation, and Measurement Science;
G. Food Science and Technology;
H. Applied Dentistry and Oral Sciences;
I. A Student Session;
J. Posters.
We hope you will be able to join this exciting event, which is organized and sponsored by MDPI, a scholarly open access publisher (https://www.mdpi.com/), and the journal Applied Sciences (ISSN: 2076-3417, Impact Factor: 2.838 (2021)).
Paper Submission Guidelines:
You will be able to submit an abstract first. After acceptance, you will be able to upload a proceedings paper (3–6 pages), a poster, a slides presentation (in PDF), or a short video presentation (max. 3–5 minutes) before the full submission deadline. All accepted proceedings papers will be published in one dedicated volume in the MDPI Proceedings journal Engineering Proceedings (SCOPUS Indexed; ISSN: 2673-4591). The publication of proceedings papers is free of charge. A conference Special Issue (upcoming) will be published in the open access journal Applied Sciences (Impact Factor:2.838). Conference participants are encouraged to submit a full paper to the dedicated Special Issue.
In addition, to acknowledge the support of the conference’s esteemed authors and recognize their outstanding scientific accomplishments, we are pleased to launch the Best Contribution Award and Best Student Award. For more information about the procedure for submission, peer review, revision, and acceptance of conference proceedings papers, please refer to the section “Instructions for Authors”.
Timeline:
Abstract Submission: 6th July 2023
Notification of Acceptance: 27th July 2023
Proceedings Paper Submission Deadline: 28th August 2023
Conference: 27 October–10 November 2023
We look forward to receiving your research papers and to welcoming you to the 4th edition of the e-conference.
To find out more about the conference, please visit the following link:
Metals announces selected third-party conferences. In case you would like to announce your own event on the Metals website, please fill out the following form to apply for the announcement of a conference or other academic event (seminar, workshop).
Upcoming Partner Conferences (5)
Guiyang, China
The 2nd International Conference on New Materials, Machinery and Vehicle Engineering will be held in Guiyang, China, from 2 to 4 June 2023. The conference aims to promote exchange and cooperation among experts and scholars in the fields of new materials, machinery and vehicle engineering. Experts, scholars and technical professionals engaged in related technology research are warmly welcomed to attend the conference.
Conference Topics
| New Materials | Machinery and Vehicle Engineering |
| Structural Materials |
Machine Design |
| Composite Materials | Robotics and Mechanics |
| Insulating Material | Sensor Technology Nanofriction and Bio Friction |
| Environmental Protection Materials | Mechanical Dynamics and Vibration |
| Compound Material | Instruments and Apparatuses |
| Polymer Materials | Welding Technology and Equipment |
| Semiconductor Material | Chemical Machinery and Equipment |
| New Functional Materials | Power Mechanical Engineering |
| Optical/Electronic/Magnetic Materials | Structure and Design of Spacecraft |
| Intelligent Material System | Micronanofabrication and Ultraprecision Sensing |
| Nano Materials and Technology | Mechanical Manufacturing and Its Automation Guidance and Control Bionic Intelligent Cluster Technology |
| New Material Technology | Shaftless Propulsion System |
| New Energy Materials and Devices | Intelligent Unmanned Aerial Vehicle |
| Metal Material Engineering | Super Loop Train Technology |
| Inorganic Nonmetallic Materials | Microelectromechanical System |
| Materials Science and Engineering | Additive Manufacturing |
| Microelectronic Science and Engineering | Marine Transportation Equipment |
| Gemstone and Material Technology | Automatic Driving |
| Bio Functional Materials | Internet of Vehicles—Traffic Big Data |
| Resource Recycling Science and Engineering | Aerospace Engineering |
| Rail Transit | |
| Comprehensive Transportation | |
| New Energy Vehicles |
Important dates
- Full Paper Submission Due: 1 April 2023
- Notification of Acceptance: 6 May 2023
- Final/Revised Paper Submission Due: 15 May 2023
- Registration Deadline: 25 May 2023
- Conference Date: 2–4 June 2023
Keynote Speakers
Prof. Ji Wang, Ningbo University
Prof. Miriam Rafailovich, Stony Brook University
Prof. Yung C. Shin, Purdue University
Prof. Qigang Han, Jilin University
Assoc. Prof. Jinyang Xu, Shanghai Jiao Tong University
Contact Information
For further information please send an e-mail to:
nmmve2023@163.com (Conference Secretariat)
Conference website:
Oulu, Finland
The Process Metallurgy Research Unit at the University of Oulu and the Department for Industrial Furnaces and Heat Engineering at the RWTH Aachen University organise the 5th European Academic Symposium on EAF Steelmaking—EASES 2023 at the University of Oulu in Oulu, Finland, on 05‒07 June 2023.
Scope and Topics
The European Academic Symposium on EAF Steelmaking mainly focuses on researchers and doctoral candidates in academia and research and technology organisations and companies on the topic of EAF steelmaking and technology. It will provide the researchers and PhD students with the opportunity to present and discuss their current research projects. It will help them to connect, further understand what others working in the same field are doing, and create networks between the people working on similar topics.
Topics for presentations on the EAF process at the symposium include:
- Efficiency and optimisation.
- Process control and sensors.
- CO2 emission reduction and environmental impact.
- Process modelling and simulation.
- Scrap treatment and control.
- Alternative/new charge materials (DRI/HBI/…).
- Slag and by-products engineering, processing, and valorisation.
- Production of new steel grades.
Abstract submission is open at https://www.eases.rwth-aachen.de/abstract-submission/ until 28 February 2023.
Contact Information
For further information please send an e-mail to:
seminar@iob.rwth-aachen.de (Conference Secretariat)
Conference website:
Porto, Portugal
The 32nd edition of the International Conference on Flexible Automation and Intelligent Manufacturing will take place at the amazing and historic city of Porto, Portugal, between June 18th and June 22nd, 2023. This is a broad and well-established conference that has taken place in 27 different cities so far, alternating between Europe, the USA, and Asia.
The usual topics cover a set of different fields in the area of mechanical engineering, namely automation, robotics, materials processing, industrial management, maintenance, and Industry 4.0, among others. There are two ways of publishing in this conference: short papers will be published in a proceedings book (Lecture Notes in Mechanical Engineering), and extended versions of the best papers will be sent to Clarivate- or Scopus-indexed journals, following the traditional peer-reviewing process.
The conference will offer an ambitious social program with welcome drinks, a welcome dinner, Porto bus sightseeing, a Douro river cruise, and a gala dinner with live Portuguese traditional music.
Submissions are open at www.conftool.com/faim2023 until mid December, 2022, and full papers should be submitted until early February, 2023.
Six invited speakers are already confirmed, with a mix between academia and industry, covering important issues such as advanced materials, robotics, logistics, Lean Six Sigma, and Industry 4.0. Four awards will be distributed to the best presented works. Do not miss this opportunity to disseminate your best results in an in-person conference with significant attendance, allowing you to increase your network.
Theme and Topics
The theme of FAIM2023 is establishing bridges for more sustainable manufacturing systems, and the main topics are as follows:
- Automation and robotics;
- Manufacturing processes and optimization;
- Machines and mechanical design;
- CAD/CAM/CAE;
- Advanced materials processing and characterization;
- Cutting-edge measurement techniques;
- Innovative maintenance;
- Lean, Kaizen, Quality, and Productivity;
- Sustainability and green manufacturing;
- Human factors in manufacturing;
- Logistics;
- Mathematical models for industry and services;
- Intelligent services and artificial intelligence in manufacturing;
- IoT and cloud computing in manufacturing and services;
- Industry 4.0/5.0.
Spetses, Greece
Conference Objective
In recent decades, it has been widely recognized that preventing failure of engineering structures necessitates the involvement of a large amount of expertise and, depending on the application, might require a multidisciplinary and multiscale approach in terms of both size and time. The series of the International Conference of Engineering Against Failure (ICEAF) aims to provide, on a biennial basis, a forum to present relevant scientific and technological achievements and discuss with an audience of international experts.
The scope of the Conference is to attract interdisciplinary work dedicated to design against engineering failure, the implementation of appropriate guidelines against failure, the development and application of concepts and technologies to prevent failure, the use of both novel and established approaches, technologies, and tools for failure analysis, as well as the deep understanding of the underlying failure mechanisms and the identification of a failure’s root causes.
Works are expected to cover a number of different technological areas, including aeronautics and space, automotive, marine, wind-energy, oil refineries and chemical industry, civil engineering applications, bioengineering and medical applications, etc. The ICEAF VII Conference is co-chaired by Spiros Pantelakis (Professor Emeritus, University of Patras, Laboratory of Technology and Strength of Materials) and Michael Vormwald (Professor, Head of Materials Mechanics Group, Technical University of Darmstadt), who are sharing the scientific responsibility for the Conference.
Conference Chairmen
Prof. Emeritus Spiros Pantelakis (Conference Co-Chairman)
Prof. Michael Vormwald (Conference Co-Chairman)
Contact Information
For further information please send an e-mail to:
info@iceaf.eu (Conference Secretariat)
Conference website:
Forte Village Resort, Cagliari, Italy
The 2023 edition of the Sardinia Symposium will take place at the Forte Village Resort in Santa Margherita di Pula, Cagliari (Italy), from 9 to 13 October 2023.
The Sardinia Symposium is a biennial event organized by IWWG (International Waste Working Group) since 1987, which usually gathers more than 700 participants from all around the world, with over 400 papers presented at each edition, making the Sardinia Symposium the most important solid waste management conference in the world.
The programme of Sardinia 2023 will include leading keynote presentations, parallel oral sessions, workshops, active labs and other practical activities, discussion forums, poster presentations, commercial exhibitions, business meetings, outstanding networking opportunities and exciting social events!
It is still possible to submit abstracts for oral or poster presentations. Read more about the submission procedure and submit your proposal at https://www.sardiniasymposium.it/en/call-for-abstracts-2023
Proposals for workshops are also welcome.
Topics
- Waste policy and legislation
- Waste management strategies
- Public concern and education
- Waste management assessment and decision tools
- Waste characterization
- Waste collection
- Waste minimisation and recycling
- Biological treatment
- Thermal treatment
- Mechanical biological treatment prior to landfilling
- Sanitary landfilling
- Integrated wastewater and solid waste management
- Waste management and climate change
- Waste management in developing and low-income countries
- Waste Architecture
- Environmental Forensics
- Waste and Health
- Construction and Demolition waste from disaster waste
- New issues on Geosynthetics in environmental application
- Control of Emerging contaminants and nanoparticles in waste management
- Control of Micro- and Nanoplastics in waste management
- Circular Economy
- Biodiversity and waste management
- Digital solutions for waste management and circular economy
- Waste Art
Find out more about the conference at: https://www.sardiniasymposium.it/
For further information, please contact the Organising Secretariat at info@sardiniasymposium.it
