F: Electrical Engineering
A section of Energies (ISSN 1996-1073).
Section Information
We are living nowadays an Energy transition. We are going more electrical than ever before in transportation: electrical vehicles and ships, electrical motors are every were. Back home, more electronics, electrical kitchens and electronic controlled devices are more and more present. In some houses is not rare to see photovoltaic systems, home batteries, electrical vehicle chargers, electrical grass cutting machines, even equipped with small batteries. It is clear that energy is going more to be electrical and this is a great chance to go more toward renewable energies. Photovoltaics, wind power generation, and other renewables are going to play an unprecedented role in the way that we generate, store and consume energy. This is a chance of the change in a sustainable world that has only one possible direction, with new technologies and ideas.
This section is devoted to present the new technologies, trends and breakthroughs to promote more renewable energies for a future 100% renewable energy reality. This section, focuses on original and new research results regarding electrical power and energy technologies, as well as in diverse applications. Thus, manuscripts on planning, design, implementation, theoretical studies, economical and viability studies, as well as on their application to traditional as well as novel scenarios are solicited. Submissions addressing reviews and surveys will also be welcome. Download Section Flyer
Editorial Board
Topical Advisory Panel
Special Issues
Following special issues within this section are currently open for submissions:
- Advanced Wind Energy Systems: Comprehensive Insights into Analysis, Design, Control, and Optimization (Deadline: 29 April 2024)
- New Trends of Power Electronics Technology and Application in Energy Field: 2nd Edition (Deadline: 30 April 2024)
- Advances in Complex Dynamics of Energy Flow in Power Grid with High Penetration of Inverter-Based Renewable Resources (Deadline: 8 May 2024)
- Voltage Stability Analysis in Power Systems II (Deadline: 10 May 2024)
- Advanced Technologies for Modeling, Optimization and Control of the Distribution Grid (Deadline: 12 May 2024)
- Electrical Machines for Electric Vehicles and Renewable Energy Systems (Deadline: 15 May 2024)
- Intelligent Control and Management of Thermal Energy for Electronic Equipment (Deadline: 18 May 2024)
- Analysis and Design of High-Energy-Efficiency Permanent Magnet Machines (Deadline: 20 May 2024)
- Computational Intelligence-Based Modeling, Control, Estimation, and Optimization in Electrical Motor/Drive, Renewable Energy, and Power Systems, Volume II (Deadline: 20 May 2024)
- Research and Technology Development in Electric Power Systems (Deadline: 28 May 2024)
- Early Detection of Faults in Induction Motors II (Deadline: 31 May 2024)
- 6th International Colloquium "Transformer Research and Asset Management" (Deadline: 2 June 2024)
- Advances in Power and Energy Management for Distribution Systems with High Penetration of Distributed Energy Resources (Deadline: 10 June 2024)
- Advances in Permanent Magnet Motor and Motor Control (Deadline: 15 June 2024)
- Wireless Charging Technology and Energy Management for Electronic and Electric Devices (Deadline: 19 June 2024)
- New Challenges and Development of Electric Machines (Deadline: 19 June 2024)
- Design and Optimization of Power Transformer Diagnostics II (Deadline: 19 June 2024)
- Optimizing Power Networks for Enhanced Resilience and Efficiency in Integrated Energy Systems (Deadline: 19 June 2024)
- Integration of Renewable Energy in Australasian Power Systems: Problems and Solutions (Deadline: 20 June 2024)
- Power Converters: Modeling, Control, and Applications in Power Electronics—2nd Edition (Deadline: 20 June 2024)
- Development of Electrical Machines: Latest Studies and Future Prospects (Deadline: 27 June 2024)
- Electrical Engineering Technology in Huazhong University of Science and Technology: Celebrating the 70th Anniversary (Deadline: 27 June 2024)
- Modern Electrical Drives: Trends, Problems, and Challenges 2023 (Deadline: 30 June 2024)
- Robust Control of Electric Drives and Mechatronic Systems (Deadline: 30 June 2024)
- Selected Papers from APET 2023 - Sustainable Electrical Energy Technologies II (Deadline: 30 June 2024)
- Advances in Non/Less Rare-Earth Electric Machines towards Sustainability (Deadline: 1 July 2024)
- Advanced Technologies in Power Quality and Solutions—2nd Edition (Deadline: 15 July 2024)
- Energy, Electrical and Power Engineering 2024 (Deadline: 25 July 2024)
- Experimental and Modeling Methods, and Novel Applications of Electromagnetic Energy (Deadline: 25 July 2024)
- Advanced Topologies and Control Strategies in Electric Machines and Drives (Deadline: 31 July 2024)
- Demand-Side Energy Management Optimization (Deadline: 31 July 2024)
- Reliability and Condition Monitoring of Electric Motors and Drives (Deadline: 31 July 2024)
- New Circuit Configurations and Control in Power Electronics and Power Magnetics (Deadline: 31 July 2024)
- Artificial Intelligence for Motor Drive Systems and Its Applications (Deadline: 14 August 2024)
- Design, Analysis, Optimization and Control of Electric Machines (Deadline: 21 August 2024)
- Advances in Power Quality and Electrical Machines (Deadline: 24 August 2024)
- Multi-carrier Energy Systems (Deadline: 24 August 2024)
- Emerging Trends in Superconductivity for Electric Power Technologies (Deadline: 24 August 2024)
- Advances in Wireless Power Transfer System (Deadline: 30 August 2024)
- Fault Detection and Diagnosis Applications for Electric Vehicles and Power Electronics (Deadline: 31 August 2024)
- Topology Optimization of Special Power Supply and Balance Control of Distribution System (Deadline: 31 August 2024)
- Research on Electric Machines and Power Conversion Systems for Electric Mobility (Deadline: 31 August 2024)
- Power Semiconductor Devices: Optimization, Characterization and Applications (Deadline: 31 August 2024)
- Electromagnetic Field Computation for Electrical Engineering Devices (Deadline: 31 August 2024)
- Advances in Fault Detection, Diagnosis and Prognosis in Industrial Motors—2nd Edition (Deadline: 31 August 2024)
- Modelling and Simulation of Renewable Energy Sources Based on Multi-Agent System (Deadline: 31 August 2024)
- Electrical Equipment State Measurement and Intelligent Calculation (Deadline: 4 September 2024)
- Magnetic Field Computations and Energy Efficiency Studies in Electrical Machines (Deadline: 10 September 2024)
- Linear and Nonlinear Electric Circuits: Theoretical Analysis and Applications—2nd Edition (Deadline: 10 September 2024)
- Frequency Regulation in Low-Inertia Renewable-Energy-Dominated Grid II (Deadline: 20 September 2024)
- New Progress in Electricity Demand Forecasting (Deadline: 25 September 2024)
- Advances in Cooperative Control and State Estimation of Power Systems with Large Scale Renewable Energy Sources (Deadline: 30 September 2024)
- Electrical Engineering, High Voltage and Insulation Technology (Deadline: 30 September 2024)
- Advances and Optimization of Electric Energy System—2nd Edition (Deadline: 30 September 2024)
- Applications of Electromagnetism in Energy Efficiency (Deadline: 30 September 2024)
- Innovative Techniques for Distribution Grids Digitalization (Deadline: 30 September 2024)
- Power Quality in Modern Distribution Systems: Latest Advances and Prospects (Deadline: 9 October 2024)
- Control and Optimization of Electrical Power and Energy Systems to Integrate More Renewable and Sustainable Energy Resources (Deadline: 10 October 2024)
- New Insights into Design, Control and Application of Modular Multilevel Converters (Deadline: 10 October 2024)
- Electric Machinery and Transformers III (Deadline: 25 October 2024)
- Electronics for Energy Conversion and Renewables (Deadline: 31 October 2024)
- Power Electronic Design and Applications in Power Generation, Transmission, and Distribution Systems (Deadline: 31 October 2024)
- Design and Monitoring Technology for Diesel-Electric Hybrid Power System (Deadline: 20 November 2024)
- Trends and Challenges in Power System Stability and Control (Deadline: 30 November 2024)
- Design and Production Process Optimization for High Performance and Energy Efficiency in Electrical Machines (Deadline: 20 December 2024)
- Advanced Reliability Modelling and Operation Management Strategies for Power Systems (Deadline: 31 December 2024)
- Selected Papers from the ICEUBI2024—International Congress on Engineering (Deadline: 31 December 2024)
- Large-Scale Integration of Renewable Energy in Electric Systems (Deadline: 31 December 2024)
- Modeling Approaches of Electromagnetic Devices for R&D Engineers (Deadline: 31 December 2024)
- Improvements in Grounding Practice: Topology of Grounding Systems, Soil Characteristics Impact, and Simulation Methods for Transients’ Studies (Deadline: 31 March 2025)
- Optimization Design of Electromagnetic Mechanism (Deadline: 12 July 2026)
Topical Collections
Following topical collections within this section are currently open for submissions:
