Applied Sciences

Research

Jump to: Review

24 pages, 4795 KiB

Open AccessArticle

Empirical Correlation between Standard Penetration Resistance (SPT-N) and Shear Wave Velocity (V_s) for Soils in Metro Manila, Philippines

by Arturo S. Daag, Oliver Paul C. Halasan, Arielle Anne T. Magnaye, Rhommel N. Grutas and Renato U. Solidum, Jr.

Appl. Sci. 2022, 12(16), 8067; https://doi.org/10.3390/app12168067 - 12 Aug 2022

Cited by 6 | Viewed by 4209

Abstract

The measurement of the shear wave velocities (V_s) of soils is an important aspect of geotechnical and earthquake engineering, due to its direct relation to the shear modulus (G), which in turn influences the stress–strain behavior of geomaterials. V_s can [...] Read more.

The measurement of the shear wave velocities (V_s) of soils is an important aspect of geotechnical and earthquake engineering, due to its direct relation to the shear modulus (G), which in turn influences the stress–strain behavior of geomaterials. V_s can be directly measured or estimated using a variety of onsite tests or in a laboratory. Methods such as downhole PS logging require boreholes and may not be logistically and economically feasible in all situations. Many researchers have estimated V_s from other geotechnical parameters, such as standard penetration test resistance (SPT-N), by means of empirical correlations. This paper aimed to contribute to this subject by developing an empirical relationship between V_s and SPT-N. Data from twenty sites in Metro Manila were obtained from geotechnical investigation reports. V_s profiles of the same sites were also acquired using the refraction microtremor method. New empirical relationships were developed for all, sandy, and clayey soil types, using a non-linear regression method that is applicable for Metro Manila soils. Statistical evaluation and comparison of the proposed correlations with other previous works suggested the viability of the empirical model. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

12 pages, 2511 KiB

Open AccessArticle

Subduction Evolution Controlled Himalayan Orogenesis: Implications from 3-D Subduction Modeling

by Weiling Zhu, Lin Ding, Yingfeng Ji, Rui Qu, Ye Zhu, Chaodi Xie and Deng Zeng

Appl. Sci. 2022, 12(15), 7413; https://doi.org/10.3390/app12157413 - 23 Jul 2022

Cited by 1 | Viewed by 1736

Abstract

Himalayan orogenesis remains enigmatic in terms of Tibetan Plateau geodynamics originating from the Cenozoic India–Eurasian continental collision. India underthrusts below Tibet to the Yarlung–Tsangpo suture, which has been identified as the northernmost boundary for underplating. However, the way in which the historical evolution [...] Read more.

Himalayan orogenesis remains enigmatic in terms of Tibetan Plateau geodynamics originating from the Cenozoic India–Eurasian continental collision. India underthrusts below Tibet to the Yarlung–Tsangpo suture, which has been identified as the northernmost boundary for underplating. However, the way in which the historical evolution of continental subduction induces plateau uplift and the way it controls the variation in uplift between outboard and inboard areas is still unclear. To interpret the evolutionary mechanisms involved in the Himalayan growth history, we constructed different 3-D dynamic models at important stages to address these questions related to the formation of the Himalayas on the basis of paleoenthalpy evidence encoded in fossil leaves from recently documented assemblages in southern Tibet. The results show that (1) the effect of crustal thickening was the predominant factor in the early evolution from the Paleocene to the early Eocene, which resulted in a moderate growth rate. (2) The consecutive slab break-off eastward from the western syntaxis and the associated slab rebound significantly accelerated orogenesis from the late Eocene to the Oligocene. The upwelling asthenospheric flow was a key control of increasing crustal buoyancy, which resulted in the fastest growth of the Himalayas during the early Miocene. (3) Thereafter, the gradually enhanced monsoon and surface erosion during accompanying the increasing mountain height resulted in a slowdown of the orogenic rate, which counterbalanced the buoyant force produced by asthenospheric flow driving continuous Himalayan growth. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

11 pages, 8177 KiB

Open AccessArticle

Non-Linear 3D Satellite Gravity Inversion for Depth to the Basement Estimation in a Mexican Semi-Arid Agricultural Region

by Raúl Ulices Silva-Ávalos, Hugo Enrique Júnez-Ferreira, Julián González-Trinidad and Carlos Bautista-Capetillo

Appl. Sci. 2022, 12(14), 7252; https://doi.org/10.3390/app12147252 - 19 Jul 2022

Cited by 1 | Viewed by 1095

Abstract

In Mexico, agriculture in semi-arid regions is highly dependent on groundwater resources, where most of the aquifers’ characterization is a pending task. In particular, the depth to the basement is unknown for most of the Mexican territory. Hence, the development and performance of [...] Read more.

In Mexico, agriculture in semi-arid regions is highly dependent on groundwater resources, where most of the aquifers’ characterization is a pending task. In particular, the depth to the basement is unknown for most of the Mexican territory. Hence, the development and performance of new techniques for the basement relief estimation is imperative for further hydrogeological studies. In this paper, we present a depth to the basement estimation using non-linear gravimetric inversion employing satellite data. Gravity forward modeling was implemented using both gravitational attraction due to juxtapositioned blocks and gravimetric non-linear inversion using conjugate gradient least squares to minimize the objective function in terms of a depth model. All of this took place under the sparse system framework. We present a synthetic result using the SEG-Bishop depth model taken for calibration purposes. Then, we recollected gravity data from The Satellite Geodesy group from SCRIPPS for the depth to the basement estimation of an unconfined aquifer in the northern-central semi-arid region of Zacatecas, Mexico. Both synthetic and satellite data were recovered, consistent depth models for both cases were presented, and a comparison with conventional gravimetric linear inversion for density estimation was performed. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

9 pages, 2072 KiB

Open AccessArticle

Grouting Effect Detection within the Floor of a Coal Seam Using 3D Electric Resistivity Tomography (ERT) with Arbitrary Electrode Positions

by Chuming Pang, Weifu Gao, Pengzheng Wu and Lidong Wang

Appl. Sci. 2022, 12(11), 5625; https://doi.org/10.3390/app12115625 - 01 Jun 2022

Cited by 2 | Viewed by 1216

Abstract

To prevent the occurrence of water inrush from the working face floor, explorations of water-rich floors are necessary. For a working face with a regular shape, a water-rich floor can be detected by laying electrodes and cables around the working face. However, the [...] Read more.

To prevent the occurrence of water inrush from the working face floor, explorations of water-rich floors are necessary. For a working face with a regular shape, a water-rich floor can be detected by laying electrodes and cables around the working face. However, the rectangular working face develops an irregular shape, and the exploration of water in irregular working faces is a difficulty in the study of 3D electric resistivity tomography (ERT). In this paper, an unconventional dipole–dipole array is used for data acquisition and the potential of a non-grid point electrode is replaced by the potential of the surrounding electrode, which identifies a water-rich floor using 3D ERT with arbitrary electrode positions. Taking the 8826 irregular working face of the Baizhuang coal mine as an example, the working face is explored by 3D ERT, the anomalous area is delineated, and targeted grouting is carried out in the anomalous area. After grouting, the grouting effect is detected by 3D ERT, and the safe mining of the working face is ensured. The results show that grouting effect detection within the floor of a coal seam using 3D electric resistivity tomography (ERT) with arbitrary electrode positions could be applied to solving the problem of water-rich exploration of floors in irregular working faces. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

13 pages, 13088 KiB

Open AccessArticle

Enhanced Discrimination of Seismic Geological Channels Based on Multi-Trace Variational Mode Decomposition

by Jiaxuan Leng, Zhichao Yu and Chaodong Wu

Appl. Sci. 2022, 12(11), 5416; https://doi.org/10.3390/app12115416 - 27 May 2022

Cited by 2 | Viewed by 1423

Abstract

The spectral decomposition is a valuable tool for improving the resolution of seismic interpretation, and thus can improve the accuracy of the subtle geo-features (thin and narrow channels, thin reservoirs, etc.). Variational mode decomposition (VMD) is an adaptive signal decomposition algorithm that non-recursively [...] Read more.

The spectral decomposition is a valuable tool for improving the resolution of seismic interpretation, and thus can improve the accuracy of the subtle geo-features (thin and narrow channels, thin reservoirs, etc.). Variational mode decomposition (VMD) is an adaptive signal decomposition algorithm that non-recursively decomposes multicomponent signals into several band-limited intrinsic mode functions, which is competitive in enhancing time-frequency resolution. However, discontinuity is normally caused by the trace-by-trace process, making the 3D seismic interpretation difficult. To address this issue, we present a novel seismic geological channel detection method for 3D seismic dataset based on multi-trace variational mode decomposition (MTVMD). The proposed method decomposes the broadband seismic data into several intrinsic mode functions and then computes seismic attributes from each component for geological feature analysis. Further tested by field seismic case, the proposed method demonstrates strength in depicting the detailed edges and sedimentary signatures of paleochannels. Overall, the proposed method provides an alternative approach to identifying seismic channels, especially for the detailed portrayals of subtle geo-features in low-quality seismic data. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

21 pages, 11664 KiB

Open AccessArticle

Quantitative Seismic Geomorphology of Four Different Types of the Continental Slope Channel Complexes in the Canterbury Basin, New Zealand

by Dicky Harishidayat and Wasif Rehman Raja

Appl. Sci. 2022, 12(9), 4386; https://doi.org/10.3390/app12094386 - 26 Apr 2022

Cited by 4 | Viewed by 1931

Abstract

Modern marine seismic reflection data have allowed for the study of the morphology of submarine channels in a 3D perspective. This study presents a quantitative analysis of continental slope channel complexes morphology within the Canterbury Basin (New Zealand). It aims to characterize the [...] Read more.

Modern marine seismic reflection data have allowed for the study of the morphology of submarine channels in a 3D perspective. This study presents a quantitative analysis of continental slope channel complexes morphology within the Canterbury Basin (New Zealand). It aims to characterize the morphology and seismic facies of submarine channels to better understand their formative sedimentary processes, paleoenvironment, and petroleum prospectivity. Submarine channel morphometric parameters are measured at 150 m intervals perpendicular to the axis of channels complexes. Based on the morphology analysis of erosional surfaces and seismic facies of channel complexes filling deposits, four types of continental slope channel complexes are found in the study area. These are vertical migrating channels, lateral migrating channels, V-shaped channels, and U-shaped channels. Furthermore, our work shows that channel morphometry varies over distances of 0.1 to 14 km in this continental slope system. These changes indicate a combination of submarine gravity flow process and channel wall collapse responsible for the development of continental slope channel complexes. Regionally, the evolution of the channels indicated less significant regional plate movement. This quantitative seismic geomorphology approach of characterizing submarine channels system has broader applications for better interpretation of paleoenvironment and petroleum prospectivity within frontier basins. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

12 pages, 5160 KiB

Open AccessArticle

Surface Displacement and Source Parameters of the 2021 Bandar-e Genaveh, Iran, Earthquake Determined from InSAR Observations

by Zeinab Golshadi, Nicola Angelo Famiglietti, Simone Atzori and Annamaria Vicari

Appl. Sci. 2022, 12(9), 4223; https://doi.org/10.3390/app12094223 - 22 Apr 2022

Cited by 3 | Viewed by 1496

Abstract

On 18 April 2021, a M_W 5.8 earthquake occurred near the city of Bandar-e Genaveh, southwestern Iran. Four synthetic aperture radar (SAR) images, acquired from Sentinel-1 (ESA Copernicus project) satellites in ascending and descending orbits, were used to get two displacement maps, [...] Read more.

On 18 April 2021, a M_W 5.8 earthquake occurred near the city of Bandar-e Genaveh, southwestern Iran. Four synthetic aperture radar (SAR) images, acquired from Sentinel-1 (ESA Copernicus project) satellites in ascending and descending orbits, were used to get two displacement maps, catching the surface co-seismic effects through the two-pass InSAR technique. Modeling the deformation patterns using equations for a shear dislocation in elastic half-space allowed the source parameters and the slip distribution of the seismogenic source to be determined. We calculated that the rupture occurred on a reverse fault extending NW-SE, gently dipping NE and with a maximum slip reaching about 1 m. The northeast and low-dip angle of this fault are also consistent with the tectonics of the region, which is subject to deformation and shortening along the northern margin of the Arabian plate. Our estimations of the fault parameters agree with the Zagros Foredeep reverse fault. We additionally processed four other SAR images to investigate the possibility that the Mw 5.0 aftershock, which occurred about one month later, induced surface effects visible with InSAR. This analysis, however, did not provide any clear conclusions. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

25 pages, 14203 KiB

Open AccessArticle

The Extended Data-Adaptive Probability-Based Electrical Resistivity Tomography Inversion Method (E-PERTI) for the Characterization of the Buried Ditch of the Ancient Egnazia (Puglia, Italy)

by Marilena Cozzolino, Paolo Mauriello and Domenico Patella

Appl. Sci. 2022, 12(5), 2690; https://doi.org/10.3390/app12052690 - 04 Mar 2022

Cited by 2 | Viewed by 1530

Abstract

A geoelectrical survey was carried out outside the walls of the ancient Egnazia (Puglia, Italy) with the aim of enriching the knowledge about its defense system. Nine Electrical Resistivity Tomographies (ERTs) were realized using the dipole-dipole (DD) electrode array, approximately transversal to the [...] Read more.

A geoelectrical survey was carried out outside the walls of the ancient Egnazia (Puglia, Italy) with the aim of enriching the knowledge about its defense system. Nine Electrical Resistivity Tomographies (ERTs) were realized using the dipole-dipole (DD) electrode array, approximately transversal to the walls and equally spaced. The new Extended data-adaptive Probability-based Electrical Resistivity Tomography Inversion Method (E-PERTI) was applied, for the first time, to model the resistivity distribution of a large dataset. Considering some peculiar aspects of the general theory of probability, an optimization of results was reached giving major emphasis to one dataset portion rather than another and inspecting selectively vertical or lateral resistivity variations. In this way, sets of aligned resistivity lows attributable to the trace of an ancient ditch were found. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

17 pages, 8093 KiB

Open AccessArticle

Applications of Electromagnetic Induction and Electrical Resistivity Tomography for Digital Monitoring and Assessment of the Soil: A Case Study of Al-Ahsa Oasis, Saudi Arabia

by Maged Mohammed, Ahmed El Mahmoudi and Yousef Almolhem

Appl. Sci. 2022, 12(4), 2067; https://doi.org/10.3390/app12042067 - 16 Feb 2022

Cited by 7 | Viewed by 3002

Abstract

Al-Ahsa Oasis is one of the main and oldest agricultural centers in Saudi Arabia and one of the largest natural oases in the world. It is the largest irrigated agricultural oasis worldwide. The cultivated area is about 12,000 hectares in the region of [...] Read more.

Al-Ahsa Oasis is one of the main and oldest agricultural centers in Saudi Arabia and one of the largest natural oases in the world. It is the largest irrigated agricultural oasis worldwide. The cultivated area is about 12,000 hectares in the region of Al-Ahsa. Groundwater was considered the main water source, if not the only source, for the different purposes of Al-Ahsa Oasis. However, due to groundwater depletion from these aquifers, treated wastewater is currently used to meet the shortage of irrigation water at Al-Ahsa Oasis. Today, several problems affect the agricultural productivity at Al-Ahsa Oasis, and modern geophysical techniques could contribute effectively to solving these problems; such problems are increasing soil salinity and the existence of a hardpan layer in some parts of the Al-Ahsa oasis. The soil texture is considered a critical factor to be taken into consideration. Therefore, the objectives of this study were to evaluate the effectiveness of modern geophysical techniques to study the agricultural aspects of Al-Ahsa oasis. Ten profiles of 2-D electrical tomography using SuperSting R8/IP 8 channel multielectrode resistivity and IP imaging system with 112 electrodes at one-meter spacing were implemented. Moreover, twenty electrical conductivity profiles were measured of 2240 points using EM38-MK2 at vertical mode with transmitter–receiver coils of 0.5 and one meter spacing. The results indicated that the salinity variation along the measured profiles was changed vertically and laterally due to the changes in the soil type, texture, moisture content, sabkha, and the whole oasis. Analysis and interpretation of the interpreted resistively tomograms of the ten 2-D profiles indicate remarkably the different geoelectric units of different hydrogeological conditions and soil texture across the oasis. These results will be of good utility for farmers, development sectors, and research institutions, especially in agriculture development studies, at Al-Ahsa Oasis, to ensure the sustainability of agriculture in this important historical Oasis. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

15 pages, 4048 KiB

Open AccessArticle

Method of Eliminating Helicopter Vibration Interference Magnetic Field with a Pair of Magnetometers

by Yongqiang Feng, Yaoxin Zheng, Luzhao Chen, Xiaodong Qu and Guangyou Fang

Appl. Sci. 2022, 12(4), 2065; https://doi.org/10.3390/app12042065 - 16 Feb 2022

Viewed by 1890

Abstract

The low-frequency electromagnetic fields and magnetic anomalies generated by ships and other underwater platforms are widely recognized as important features for ocean target detection. Low-frequency magnetic fields and anomalies are typically measured by optically pumped magnetometers installed on aircraft. However, the interference that [...] Read more.

The low-frequency electromagnetic fields and magnetic anomalies generated by ships and other underwater platforms are widely recognized as important features for ocean target detection. Low-frequency magnetic fields and anomalies are typically measured by optically pumped magnetometers installed on aircraft. However, the interference that is generated by the aircraft platform may significantly affect the detection performance. The traditional aeromagnetic compensation model has a good effect on eliminating the interference magnetic field that is caused by the carrier attitude variation. Usually, the magnetometer is fixed at the top of a long probe on the aircraft to avoid the influence from the main body in the aircraft. However, the probe is sensitive to external vibrations, and vibration-induced magnetic interference can occur in the measurements. The magnetometer is especially easily affected by the interference magnetic field, including the vibration frequency and harmonic frequency of the probe, in a moving platform, such as a helicopter. These interference fields usually have independent frequency characteristics that can be eliminated by compensation methods. In this paper, we propose a method based on the improved coherent noise suppression method with a pair of magnetometers to eliminate the effects from these magnetic field disturbances and improve the detection performance of the measurement system. The results of the flight experiment show that the method can effectively eliminate low-frequency vibration interference and improve the detection ability of weak signals from targets. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

20 pages, 4793 KiB

Open AccessArticle

Anisotropic Effective Elastic Properties for Multi-Dimensional Fractured Models

by Shikai Jian, Liyun Fu and Yifan Cheng

Appl. Sci. 2022, 12(4), 1873; https://doi.org/10.3390/app12041873 - 11 Feb 2022

Cited by 1 | Viewed by 1291

Abstract

The size, distribution, and orientation of fractures are generally multiscale and multi-dimensional in nature, leading to complex anisotropic characteristics. Theoretical or semi-analytical methods to determine the effective elastic properties depend on several assumptions, including the absence of the stress interaction and idealized fractures. [...] Read more.

The size, distribution, and orientation of fractures are generally multiscale and multi-dimensional in nature, leading to complex anisotropic characteristics. Theoretical or semi-analytical methods to determine the effective elastic properties depend on several assumptions, including the absence of the stress interaction and idealized fractures. On the basis of finite-element models, we conduct numerical oscillatory relaxation tests for determining the effective elastic properties of fractured rocks. The numerical approach for calculating equivalent stiffness tensors in two-dimensions is compared to the theoretical models for different fracture densities. Due to fracture interactions at high fracture densities, the suggested model makes a physical prediction. The effective elastic properties obtained from the application to a real fractured model, established from an outcrop, obviously disperse at different frequencies, which can be used to investigate fracture interactions and dynamic stress disturbances. The algorithm is extended to three-dimensional cases and also validated by using conventional effective medium theories. It is found that the fracture density obviously impacts the effective anisotropy properties, and the proposed method gives a reasonable prediction for high-fracture density. This work is significant because it enables the calculation of effective elastic properties of multi-dimensional fractured models and the fracture interaction mechanism. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

16 pages, 6154 KiB

Open AccessArticle

An Improved Aeromagnetic Compensation Method Robust to Geomagnetic Gradient

by Yongqiang Feng, Qimao Zhang, Yaoxin Zheng, Xiaodong Qu, Fang Wu and Guangyou Fang

Appl. Sci. 2022, 12(3), 1490; https://doi.org/10.3390/app12031490 - 29 Jan 2022

Cited by 9 | Viewed by 2828

Abstract

Aeromagnetic surveys play an important role in many fields, for example, archaeology, anti-submarine warfare, and geophysical exploration. Being in the geomagnetic field, the aircraft generates a great deal of magnetic interference, resulting in bad performance during detection surveys. Thus, it is necessary and [...] Read more.

Aeromagnetic surveys play an important role in many fields, for example, archaeology, anti-submarine warfare, and geophysical exploration. Being in the geomagnetic field, the aircraft generates a great deal of magnetic interference, resulting in bad performance during detection surveys. Thus, it is necessary and important to perform aeromagnetic compensation in advance. Conventional aeromagnetic compensation methods consider that the geomagnetic gradient is approximately zero after bandpass filtering, bringing about the inaccuracy of compensation coefficients. To address this issue, an improved aeromagnetic compensation method robust to geomagnetic gradient is proposed. In this study, the International Geomagnetic Reference Field (IGRF) model was employed to model the geomagnetic gradient. Then, the estimated geomagnetic gradient was subtracted from the measured data, which improved the accuracy of the compensation equations. Field experiments were conducted to verify the effectiveness of the proposed method. The experimental results show that compared to the traditional method, the compensation performance of the proposed method was improved by 152% to 329%. For the level flight, the standard deviation of residual noise after compensation can be as low as 3.3pT. The results indicate that the proposed method can significantly improve the compensation effect, showing great benefits for weak magnetic anomaly detection. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

12 pages, 12515 KiB

Open AccessArticle

Improved Workflow for Fault Detection and Extraction Using Seismic Attributes and Orientation Clustering

by Minki Kim, Jeongmin Yu, Nyeon-Keon Kang and Byoung-Yeop Kim

Appl. Sci. 2021, 11(18), 8734; https://doi.org/10.3390/app11188734 - 19 Sep 2021

Cited by 4 | Viewed by 3150

Abstract

Faults represent important analytical targets for the identification of perceptual ground motions and associated seismic hazards. In particular, during oil production, important data such as the path and flow rate of fluid flows can be obtained from information on fault location and their [...] Read more.

Faults represent important analytical targets for the identification of perceptual ground motions and associated seismic hazards. In particular, during oil production, important data such as the path and flow rate of fluid flows can be obtained from information on fault location and their connectivity. Seismic attributes are conventional methods used for fault detection, whereby information obtained from seismic data are analyzed using various property processing methods. The analyzed data eventually provide information on fault properties and imaging of fault surfaces. In this study, we propose an efficient workflow for fault detection and extraction of requisite information to construct a fault surface model using 3D seismic cubes. This workflow not only improves the ability to detect faults but also distinguishes the edges of a fault more clearly, even with the application of fewer attributes compared to conventional workflows. Thus, the computing time of attribute processing is reduced, and fault surface cubes are generated more rapidly. In addition, the reduction in input variables reduces the effect of the interpreter’s subjective intervention on the results. Furthermore, the clustering method can be applied to the azimuth and dip of the fault to be extracted from the complexly intertwined fault faces and subsequently imaged. The application of the proposed workflow to field data obtained from the Vincentian oil field in Australia resulted in a significant reduction in noise compared to conventional methods. It also led to clearer and continuous edge detection and extraction. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

11 pages, 4581 KiB

Open AccessArticle

Variations in Wedge Earthquake Distribution along the Strike Underlain by Thermally Controlled Hydrated Megathrusts

by Rui Qu, Yingfeng Ji and Weiling Zhu

Appl. Sci. 2021, 11(16), 7268; https://doi.org/10.3390/app11167268 - 06 Aug 2021

Cited by 7 | Viewed by 1706

Abstract

Accretionary wedge earthquakes usually occur in the overriding crust close to the trench or above the cold nose of the mantle wedge. However, the mechanism and temperature properties related to the slab dip angle remain poorly understood. Based on 3D thermal models to [...] Read more.

Accretionary wedge earthquakes usually occur in the overriding crust close to the trench or above the cold nose of the mantle wedge. However, the mechanism and temperature properties related to the slab dip angle remain poorly understood. Based on 3D thermal models to estimate the subduction wedge plate temperature and structure, we investigate the distribution of wedge earthquakes in Alaska, which has a varying slab dip angle along the trench. The horizontal distance of wedge-earthquake hypocenters significantly increases from the Aleutian Islands to south–central Alaska due to a transition from steep subduction to flat subduction. Slab dehydration inside the subducted Pacific plate indicates a simultaneous change in the distances between the intraslab metamorphic fronts and the Alaskan Trench at various depths, which is associated with the flattening of the Pacific plate eastward along the strike. The across-arc width of the wedge-earthquake source zone is consistent with the across-arc width of the surface high topography above the fully dehydrated megathrust, and the fluid upwelling spontaneously influences wedge seismotectonics and orogenesis. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

22 pages, 5499 KiB

Open AccessArticle

Two-Dimensional Full-Waveform Joint Inversion of Surface Waves Using Phases and Z/H Ratios

by Chao Zhang, Ting Lei and Yi Wang

Appl. Sci. 2021, 11(15), 6712; https://doi.org/10.3390/app11156712 - 22 Jul 2021

Cited by 2 | Viewed by 1863

Abstract

Surface-wave dispersion and the Z/H ratio are important parameters used to resolve the Earth’s structure, especially for S-wave velocity. Several previous studies have explored using joint inversion of these two datasets. However, all of these studies used a 1-D depth-sensitivity kernel, which lacks [...] Read more.

Surface-wave dispersion and the Z/H ratio are important parameters used to resolve the Earth’s structure, especially for S-wave velocity. Several previous studies have explored using joint inversion of these two datasets. However, all of these studies used a 1-D depth-sensitivity kernel, which lacks precision when the structure is laterally heterogeneous. Adjoint tomography (i.e., full-waveform inversion) is a state-of-the-art imaging method with a high resolution. It can obtain better-resolved lithospheric structures beyond the resolving ability of traditional ray-based travel-time tomography. In this study, we present a systematic investigation of the 2D sensitivities of the surface wave phase and Z/H ratio using the adjoint-state method. The forward-modeling experiments indicated that the 2D phase and Z/H ratio had different sensitivities to the S-wave velocity. Thus, a full-waveform joint-inversion scheme of surface waves with phases and a Z/H ratio was proposed to take advantage of their complementary sensitivities to the Earth’s structure. Both applications to synthetic data sets in large- and small-scale inversions demonstrated the advantage of the joint inversion over the individual inversions, allowing for the creation of a more unified S-wave velocity model. The proposed joint-inversion scheme offers a computationally efficient and inexpensive alternative to imaging fine-scale shallow structures beneath a 2D seismic array. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

8 pages, 3976 KiB

Open AccessArticle

Impact of Post-Earthquake Seismic Waves on the Terrestrial Environment

by Xiangzhi Zeng and Wencai Yang

Appl. Sci. 2021, 11(14), 6606; https://doi.org/10.3390/app11146606 - 18 Jul 2021

Cited by 1 | Viewed by 1564

Abstract

When an earthquake occurs, it is not only the crustal material in the seismic zone that moves violently; the seismic waves of the earthquake with certain level of energy can act on the crust over large areas, producing remote effects that affect the [...] Read more.

When an earthquake occurs, it is not only the crustal material in the seismic zone that moves violently; the seismic waves of the earthquake with certain level of energy can act on the crust over large areas, producing remote effects that affect the living environment. According to the records of the long-term observation station of Chinese Continental Scientific Drilling, the effects of near-surface crust caused by the post-earthquake seismic waves include the following four aspects: (1) the pore fissure loosening; (2) the pore pressure rising and groundwater upwelling; (3) gas releasing; and (4) exothermic reaction. The effects of groundwater upwelling, gas releasing and exothermic reaction may be superimposed on the process of global warming, which has a certain impact on the terrestrial environment and requires further studies. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

16 pages, 3773 KiB

Open AccessArticle

Lp-Norm Inversion of Gravity Data Using Adaptive Differential Evolution

by Tao Song, Xing Hu, Wei Du, Lianzheng Cheng, Tiaojie Xiao and Qian Li

Appl. Sci. 2021, 11(14), 6485; https://doi.org/10.3390/app11146485 - 14 Jul 2021

Cited by 4 | Viewed by 1726

Abstract

As a popular population based heuristic evolutionary algorithm, differential evolution (DE) has been widely applied in various science and engineering problems. Similar to other global nonlinear algorithms, such as genetic algorithm, simulated annealing, particle swarm optimization, etc., the DE algorithm is mostly applied [...] Read more.

As a popular population based heuristic evolutionary algorithm, differential evolution (DE) has been widely applied in various science and engineering problems. Similar to other global nonlinear algorithms, such as genetic algorithm, simulated annealing, particle swarm optimization, etc., the DE algorithm is mostly applied to resolve the parametric inverse problem, but has few applications in physical property inversion. According to our knowledge, this is the first time DE has been applied in obtaining the physical property distribution of gravity data due to causative sources embedded in the subsurface. In this work, the search direction of DE is guided by better vectors, enhancing the exploration efficiency of the mutation strategy. Besides, to reduce the over-stochastic of the DE algorithm, the perturbation directions in mutation operations are smoothed by using a weighted moving average smoothing technique, and the Lp-norm regularization term is implemented to sharpen the boundary of density distribution. Meanwhile, in the search process of DE, the effect of Lp-norm regularization term is controlled in an adaptive manner, which can always have an impact on the data misfit function. In the synthetic anomaly case, both noise-free and noisy data sets are considered. For the field case, gravity anomalies originating from the Shihe iron ore deposit in China were inverted and interpreted. The reconstructed density distribution is in good agreement with the one obtained by drill-hole information. Based on the tests in the present study, one can conclude that the Lp-norm inversion using DE is a useful tool for physical property distribution using gravity anomalies. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

21 pages, 10418 KiB

Open AccessArticle

Computation of Optimized Electrode Arrays for 3-D Electrical Resistivity Tomography Surveys

by Kleanthis Simyrdanis, Nikos Papadopoulos and Dimitrios Oikonomou

Appl. Sci. 2021, 11(14), 6394; https://doi.org/10.3390/app11146394 - 11 Jul 2021

Viewed by 1909

Abstract

The present study explores the applicability and effectiveness of an optimization technique applied to electrical resistivity tomography data. The procedure is based on the Jacobian matrix, where the most sensitive measurements are selected from a comprehensive data set to enhance the least resolvable [...] Read more.

The present study explores the applicability and effectiveness of an optimization technique applied to electrical resistivity tomography data. The procedure is based on the Jacobian matrix, where the most sensitive measurements are selected from a comprehensive data set to enhance the least resolvable parameters of the reconstructed model. Two existing inversion programs in two and three dimensions are modified to incorporate this new approach. Both of them are selecting the optimum data from an initial comprehensive data set which is comprised of merged conventional arrays. With the two-dimensional (2-D) optimization approach, the most sensitive measurements are selected from a 2-D survey profile and then a clone of the resulting optimum profile reproduces a three-dimensional (3-D) optimum data set composed of equally spaced parallel lines. In a different approach, with the 3-D optimization technique, the optimum data are selected from a 3-D data set of equally spaced individual parallel lines. Both approaches are compared with Stummer’s optimization technique which is based on the resolution matrix. The Jacobian optimization approach has the advantage of selecting the optimum data set without the need for the solution of the inversion problem since the Jacobian matrix is calculated as part of the forward resistivity problem, thus being faster from previous published approached based on the calculation of the sensitivity matrix. Synthetic 3-D data based on the extension of previous published works for the 2-D optimization case and field data from two case studies in Greece are tested, thus verifying the validity of the present study, where fewer measurements from the initial data set (about 15–50%) are able to reconstruct a model similar with the one produced from the original comprehensive data set. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

17 pages, 9314 KiB

Open AccessArticle

Mean Dynamic Topography Modeling Based on Optimal Interpolation from Satellite Gravimetry and Altimetry Data

by Yihao Wu, Jia Huang, Hongkai Shi and Xiufeng He

Appl. Sci. 2021, 11(11), 5286; https://doi.org/10.3390/app11115286 - 07 Jun 2021

Cited by 3 | Viewed by 2008

Abstract

Mean dynamic topography (MDT) is crucial for research in oceanography and climatology. The optimal interpolation method (OIM) is applied to MDT modeling, where the error variance–covariance information of the observations is established. The global geopotential model (GGM) derived from GOCE (Gravity Field and [...] Read more.

Mean dynamic topography (MDT) is crucial for research in oceanography and climatology. The optimal interpolation method (OIM) is applied to MDT modeling, where the error variance–covariance information of the observations is established. The global geopotential model (GGM) derived from GOCE (Gravity Field and Steady-State Ocean Circulation Explorer) gravity data and the mean sea surface model derived from satellite altimetry data are combined to construct MDT. Numerical experiments in the Kuroshio over Japan show that the use of recently released GOCE-derived GGM derives a better MDT compared to the previous models. The MDT solution computed based on the sixth-generation model illustrates a lower level of root mean square error (77.0 mm) compared with the ocean reanalysis data, which is 2.4 mm (5.4 mm) smaller than that derived from the fifth-generation (fourth-generation) model. This illustrates that the accumulation of GOCE data and updated data preprocessing methods can be beneficial for MDT recovery. Moreover, the results show that the OIM outperforms the Gaussian filtering approach, where the geostrophic velocity derived from the OIM method has a smaller misfit against the buoy data, by a magnitude of 10 mm/s (17 mm/s) when the zonal (meridional) component is validated. This is mainly due to the error information of input data being used in the optimal interpolation method, which may obtain more reasonable weights of observations than the Gaussian filtering method. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

16 pages, 1621 KiB

Open AccessArticle

Multiscale Post-Seismic Deformation Based on cGNSS Time Series Following the 2015 Lefkas (W. Greece) Mw6.5 Earthquake

by Filippos Vallianatos and Vassilis Sakkas

Appl. Sci. 2021, 11(11), 4817; https://doi.org/10.3390/app11114817 - 24 May 2021

Cited by 4 | Viewed by 1505

Abstract

In the present work, a multiscale post-seismic relaxation mechanism, based on the existence of a distribution in relaxation time, is presented. Assuming an Arrhenius dependence of the relaxation time with uniform distributed activation energy in a mesoscopic scale, a generic logarithmic-type relaxation in [...] Read more.

In the present work, a multiscale post-seismic relaxation mechanism, based on the existence of a distribution in relaxation time, is presented. Assuming an Arrhenius dependence of the relaxation time with uniform distributed activation energy in a mesoscopic scale, a generic logarithmic-type relaxation in a macroscopic scale results. The model was applied in the case of the strong 2015 Lefkas Mw6.5 (W. Greece) earthquake, where continuous GNSS (cGNSS) time series were recorded in a station located in the near vicinity of the epicentral area. The application of the present approach to the Lefkas event fits the observed displacements implied by a distribution of relaxation times in the range τ_min ≈ 3.5 days to τ_max ≈ 350 days. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

17 pages, 9997 KiB

Open AccessArticle

Detection of Preferential Water Flow by Electrical Resistivity Tomography and Self-Potential Method

by Karlis Kukemilks and Jean-Frank Wagner

Appl. Sci. 2021, 11(9), 4224; https://doi.org/10.3390/app11094224 - 06 May 2021

Cited by 12 | Viewed by 2442

Abstract

This study explores the hydrogeological conditions of a landslide-prone hillslope in the Upper Mosel valley, Luxembourg. The investigation program included the monitoring of piezometer wells, hydrogeological field tests, analysis of drillcore records, and geophysical surveys. Monitoring and field testing in some of the [...] Read more.

This study explores the hydrogeological conditions of a landslide-prone hillslope in the Upper Mosel valley, Luxembourg. The investigation program included the monitoring of piezometer wells, hydrogeological field tests, analysis of drillcore records, and geophysical surveys. Monitoring and field testing in some of the observation wells indicated very pronounced preferential flow. Electrical resistivity tomography (ERT) and self-potential geophysical methods were employed in the study area for exploration of the morphology of preferential flowpaths. Possible signals associated with flowing groundwater in the subsurface were detected; however, they were diffusively spread over a relatively large zone, which did not allow for the determination of an exact morphology of the conduit. Analysis of drillcore records indicated that flowpaths are caused by the dissolution of thin gypsum interlayers in marls. For better understanding of the site’s hydrogeological settings, a 3D hydrogeological model was compiled. By applying different subsurface flow mechanisms, a hydrogeological model with thin, laterally extending flowpaths embedded in a porous media matrix showed the best correspondence with field observations. Simulated groundwater heads in a preferential flow conduit exactly corresponded with the observed heads in the piezometer wells. This study illustrates how hydrogeological monitoring and geophysical surveys in conjunction with the newest hydrogeological models allow for better conceptualization and parametrization of preferential flow. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

30 pages, 36575 KiB

Open AccessArticle

Uncertainty of the 2D Resistivity Survey on the Subsurface Cavities

by Yonatan Garkebo Doyoro, Ping-Yu Chang and Jordi Mahardika Puntu

Appl. Sci. 2021, 11(7), 3143; https://doi.org/10.3390/app11073143 - 01 Apr 2021

Cited by 11 | Viewed by 3551

Abstract

We examined the uncertainty of the two-dimensional (2D) resistivity method using conceptual cavity models. The experimental cavity study was conducted to validate numerical model results. Spatial resolution and sensitivity to resistivity perturbations were also assessed using checkerboard tests. Conceptual models were simulated to [...] Read more.

We examined the uncertainty of the two-dimensional (2D) resistivity method using conceptual cavity models. The experimental cavity study was conducted to validate numerical model results. Spatial resolution and sensitivity to resistivity perturbations were also assessed using checkerboard tests. Conceptual models were simulated to generate synthetic resistivity data for dipole-dipole (DD), pole-dipole (PD), Wenner–Schlumberger (WS), and pole-pole (PP) arrays. The synthetically measured resistivity data were inverted to obtain the geoelectric models. The highest anomaly effect (1.46) and variance (24,400 Ω·m) in resistivity data were recovered by the DD array, whereas the PP array obtained the lowest anomaly effect (0.60) and variance (2401 Ω·m) for the shallowest target cavity set at 2.2 m depth. The anomaly effect and variance showed direct dependency on the quality of the inverted models. The DD array provided the highest model resolution that shows relatively distinct anomaly geometries. In contrast, the PD and WS arrays recovered good resolutions, but it is challenging to determine the correct anomaly geometries with them. The PP array reproduced the lowest resolution with less precise anomaly geometries. Moreover, all the tested arrays showed high sensitivity to the resistivity contrasts at shallow depth. The DD and WS arrays displayed the higher sensitivity to the resistivity perturbations compared to the PD and PP arrays. The inverted models showed a reduction in sensitivity, model resolution, and accuracy at deeper depths, creating ambiguity in resistivity model interpretations. Despite these uncertainties, our modeling specified that two-dimensional resistivity imaging is a potential technique to study subsurface cavities. We inferred that the DD array is the most appropriate for cavity surveys. The PD and WS arrays are adequate, while the PP array is the least suitable for cavity studies. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

29 pages, 8305 KiB

Open AccessArticle

Seismic Data Interpretation and Petrophysical Analysis of Kabirwala Area Tola (01) Well, Central Indus Basin, Pakistan

by Naveed Ahmad, Sikandar Khan and Abdullatif Al-Shuhail

Appl. Sci. 2021, 11(7), 2911; https://doi.org/10.3390/app11072911 - 24 Mar 2021

Cited by 10 | Viewed by 3068

Abstract

Well logging is a significant procedure that assists geophysicists and geologists with making predictions regarding boreholes and efficiently utilizing and optimizing the drilling process. The current study area is positioned in the Punjab Territory of Pakistan, and the geographic coordinates are 30020′10 N [...] Read more.

Well logging is a significant procedure that assists geophysicists and geologists with making predictions regarding boreholes and efficiently utilizing and optimizing the drilling process. The current study area is positioned in the Punjab Territory of Pakistan, and the geographic coordinates are 30020′10 N and 70043′30 E. The objective of the current research work was to interpret the subsurface structure and reservoir characteristics of the Kabirwala area Tola (01) well, which is located in the Punjab platform, Central Indus Basin, utilizing 2D seismic and well log data. Formation evaluation for hydrocarbon potential using the reservoir properties is performed in this study. For the marked zone of interest, the study also focuses on evaluating the average water saturation, average total porosity, average effective porosity, and net pay thickness. The results of the study show a spotted horizon stone with respect to time and depth as follows: Dunghan formation, 0.9 s and 1080.46 m; Cretaceous Samana Suk formation, 0.96 s and 1174.05 m; Datta formation, 1.08 s and 1400 m; and Warcha formation, 1.24 s and 1810 m. Based on the interpretation of well logs, the purpose of petrophysical analysis was to identify hydrocarbon-bearing zones in the study area. Gamma ray, spontaneous potential, resistivity, neutron, and density log data were utilized. The high zone present in the east–west part of the contour maps may be a possible location of hydrocarbon entrapment, which is further confirmed by the presence of the Tola-01 well. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

9 pages, 6886 KiB

Open AccessArticle

Application of the Segmented Correlation Technology in Seismic Communication with Morse Code

by Yuanjie Jiang, Yuda Chen, Ruyun Tian, Longxu Wang, Shixue Lv, Jun Lin and Xuefeng Xing

Appl. Sci. 2021, 11(4), 1947; https://doi.org/10.3390/app11041947 - 23 Feb 2021

Cited by 3 | Viewed by 1855

Abstract

Seismic communication might promise to revolutionize the theory of seismic waves. However, one of the greatest challenges to its widespread adoption is the difficulty of signal extraction because the seismic waves in the vibration environments, such as seas, streets, city centers and subways, [...] Read more.

Seismic communication might promise to revolutionize the theory of seismic waves. However, one of the greatest challenges to its widespread adoption is the difficulty of signal extraction because the seismic waves in the vibration environments, such as seas, streets, city centers and subways, are very complex. Here, we employ segmented correlation technology with Morse code (SCTMC), which extracts the target signal by cutting the collected data into a series of segments and makes these segments cross-correlate with the decoded signal to process the collected data. To test the effectiveness of the technology, a seismic communication system composed of vibroseis sources and geophones was built in an environment full of other vibration signals. Most notably, it improves the signal-to-noise ratio (SNR), extending the relay distance and suppressing other vibration signals by using technology to deal with seismic data generated by the system. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

18 pages, 7520 KiB

Open AccessArticle

Ambient Noise Measurements to Constrain the Geological Structure of the Güevéjar Landslide (S Spain)

by José Delgado, Juan José Galiana-Merino, Francisco J. García-Tortosa, Jesús Garrido, Luca Lenti, Salvatore Martino, José A. Peláez, Martín J. Rodríguez-Peces, Carlos Sanz de Galdeano and Juan L. Soler-Llorens

Appl. Sci. 2021, 11(4), 1454; https://doi.org/10.3390/app11041454 - 05 Feb 2021

Cited by 7 | Viewed by 2138

Abstract

The reactivation of very large landslides may cause severe damage to society. Its prevention and management requires detailed information on the geometry and structure of these landslides, but the use of standard techniques (boreholes) may be prohibitive from an economic point of view. [...] Read more.

The reactivation of very large landslides may cause severe damage to society. Its prevention and management requires detailed information on the geometry and structure of these landslides, but the use of standard techniques (boreholes) may be prohibitive from an economic point of view. To overcome these difficulties, geophysical techniques are of special interest because they allow for studying very large areas at a reasonable cost. In this paper, we present a case study wherein the analysis of ambient noise allowed us to produce a model of a large landslide near Granada (southern Spain). The geometry and location of the failure zone, as well as the assessment of the state of involved materials, were estimated by combining two available boreholes and different geophysical techniques (downhole tests and the spectral analysis of ambient noise, horizontal to vertical spectral ratios (HVSR) and the frequency-wavenumber (f-k) methods). The results have allowed us to differentiate between values within the landslide mass with respect to those of stable materials, and to perform for the first time a comprehensive geological model of this unstable mass. Differences were also observed within the landslide mass (earth flow vs. slide zones), which are attributed to differences in the degree of alteration and the disturbance of the internal structure of materials constituting the landslide mass. These results show that techniques based on the measurement of ambient noise are of special interest for studying very large, highly remolded landslide masses. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

13 pages, 8822 KiB

Open AccessArticle

Viscoelastic Model and Synthetic Seismic Data of Eastern Rub’Al-Khali

by Septriandi A. Chan, Paul Edigbue, Sikandar Khan, Abdul L. Ashadi and Abdullatif A. Al-Shuhail

Appl. Sci. 2021, 11(4), 1401; https://doi.org/10.3390/app11041401 - 04 Feb 2021

Cited by 3 | Viewed by 2250

Abstract

The Rub’ Al-Khali basin in Saudi Arabia remains unexplored and lacks data availability due to its remoteness and the challenging nature of its terrain. Thus far, there are neither digital geologic models nor synthetic seismic data from this specific area accessible for testing [...] Read more.

The Rub’ Al-Khali basin in Saudi Arabia remains unexplored and lacks data availability due to its remoteness and the challenging nature of its terrain. Thus far, there are neither digital geologic models nor synthetic seismic data from this specific area accessible for testing research techniques and analysis. In this study, we build a 2D viscoelastic model of the eastern part of the Rub’ Al-Khali basin and generate a corresponding dual-component seismic data set. We compile high-resolution depth models of compressional- and shear-wave velocities, density, as well as compressional- and shear-wave quality factors from published data. The compiled models span Neoproterozoic basement up to Quaternary sand dunes. We then use the finite-difference technique to model the propagation of seismic waves in the compiled viscoelastic medium of eastern Rub’ Al-Khali desert. In particular, we generate vertical and horizontal components of the shot gathers with accuracy to the fourth and second orders in space and time, respectively. The viscoelastic models and synthetic seismic datasets are made available in an open-source site for prospective re-searchers who desire to use them for their research. Users of these datasets are urged to make their findings also accessible to the geoscience community as a way of keeping track of developments related to the Rub’ Al-Khali desert. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

22 pages, 8754 KiB

Open AccessArticle

l_p Norm Smooth Inversion of Magnetic Anomaly Based on Improved Adaptive Differential Evolution

by Wei Du, Lianzheng Cheng and Yuanfang Li

Appl. Sci. 2021, 11(3), 1072; https://doi.org/10.3390/app11031072 - 25 Jan 2021

Cited by 8 | Viewed by 1767

Abstract

Due to the approved applicability of differential evolution (DE) in geophysical problems, the algorithm has been widely concerned. The DE algorithms are mostly applied to solve the geophysical parametric estimation based on specific models, but they are rarely used in solving the physical [...] Read more.

Due to the approved applicability of differential evolution (DE) in geophysical problems, the algorithm has been widely concerned. The DE algorithms are mostly applied to solve the geophysical parametric estimation based on specific models, but they are rarely used in solving the physical property inverse problem of geophysical data. In this paper, an improved adaptive differential evolution is proposed to solve the

l_{p}

norm magnetic inversion of 2D data, in which the perturbation direction in the mutation strategy is smoothed by using the moving average technique. Besides, a new way of updating the regularization coefficient is introduced to balance the effect of the model constraint adaptively. The inversion results of synthetic models demonstrate that the presented method can obtain a smoother solution and delineate the distributions of abnormal bodies better. In the field example of Zaohuoxi iron ore deposits in China, the reconstructed magnetic source distribution is in good agreement with the one inferred from drilling information. The result shows that the proposed method offers a valuable tool for magnetic anomaly inversion. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

15 pages, 3497 KiB

Open AccessArticle

3D Gravity Inversion on Unstructured Grids

by Siyuan Sun, Changchun Yin and Xiuhe Gao

Appl. Sci. 2021, 11(2), 722; https://doi.org/10.3390/app11020722 - 13 Jan 2021

Cited by 3 | Viewed by 2331

Abstract

Compared with structured grids, unstructured grids are more flexible to model arbitrarily shaped structures. However, based on unstructured grids, gravity inversion results would be discontinuous and hollow because of cell volume and depth variations. To solve this problem, we first analyzed the gradient [...] Read more.

Compared with structured grids, unstructured grids are more flexible to model arbitrarily shaped structures. However, based on unstructured grids, gravity inversion results would be discontinuous and hollow because of cell volume and depth variations. To solve this problem, we first analyzed the gradient of objective function in gradient-based inversion methods, and a new gradient scheme of objective function is developed, which is a derivative with respect to weighted model parameters. The new gradient scheme can more effectively solve the problem with lacking depth resolution than the traditional inversions, and the improvement is not affected by the regularization parameters. Besides, an improved fuzzy c-means clustering combined with spatial constraints is developed to measure property distribution of inverted models in both spatial domain and parameter domain simultaneously. The new inversion method can yield a more internal continuous model, as it encourages cells and their adjacent cells to tend to the same property value. At last, the smooth constraint inversion, the focusing inversion, and the improved fuzzy c-means clustering inversion on unstructured grids are tested on synthetic and measured gravity data to compare and demonstrate the algorithms proposed in this paper. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

18 pages, 6833 KiB

Open AccessArticle

Prediction of Shale Gas Reservoirs Using Fluid Mobility Attribute Driven by Post-Stack Seismic Data: A Case Study from Southern China

by Jing Zeng, Alexey Stovas, Handong Huang, Lixia Ren and Tianlei Tang

Appl. Sci. 2021, 11(1), 219; https://doi.org/10.3390/app11010219 - 28 Dec 2020

Cited by 1 | Viewed by 1933

Abstract

Paleozoic marine shale gas resources in Southern China present broad prospects for exploration and development. However, previous research has mostly focused on the shale in the Sichuan Basin. The research target of this study is expanded to the Lower Silurian Longmaxi shale outside [...] Read more.

Paleozoic marine shale gas resources in Southern China present broad prospects for exploration and development. However, previous research has mostly focused on the shale in the Sichuan Basin. The research target of this study is expanded to the Lower Silurian Longmaxi shale outside the Sichuan Basin. A prediction scheme of shale gas reservoirs through the frequency-dependent seismic attribute technology is developed to reduce drilling risks of shale gas related to complex geological structure and low exploration level. Extracting frequency-dependent seismic attribute is inseparable from spectral decomposition technology, whereby the matching pursuit algorithm is commonly used. However, frequency interference in MP results in an erroneous time-frequency (TF) spectrum and affects the accuracy of seismic attribute. Firstly, a novel spectral decomposition technology is proposed to minimize the effect of frequency interference by integrating the MP and the ensemble empirical mode decomposition (EEMD). Synthetic and real data tests indicate that the proposed spectral decomposition technology provides a TF spectrum with higher accuracy and resolution than traditional MP. Then, a seismic fluid mobility attribute, extracted from the post-stack seismic data through the proposed spectral decomposition technology, is applied to characterize the shale reservoirs. The application result indicates that the seismic fluid mobility attribute can describe the spatial distribution of shale gas reservoirs well without well control. Based on the seismic fluid mobility attribute section, we have learned that the shale gas enrich areas are located near the bottom of the Longmaxi Formation. The inverted velocity data are also introduced to further verify the reliability of seismic fluid mobility. Finally, the thickness map of gas-bearing shale reservoirs in the Longmaxi Formation is obtained by combining the seismic fluid mobility attribute with the inverted velocity data, and two favorable exploration areas are suggested by analyzing the thickness, structure, and burial depth. The present work can not only be used to evaluate shale gas resources in the early stage of exploration, but also help to design the landing point and trajectory of directional drilling in the development stage. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

17 pages, 2594 KiB

Open AccessArticle

Seismic AVOA Inversion for Weak Anisotropy Parameters and Fracture Density in a Monoclinic Medium

by Zijian Ge, Shulin Pan and Jingye Li

Appl. Sci. 2020, 10(15), 5136; https://doi.org/10.3390/app10155136 - 26 Jul 2020

Cited by 8 | Viewed by 2012

Abstract

In shale gas development, fracture density is an important lithologic parameter to properly characterize reservoir reconstruction, establish a fracturing scheme, and calculate porosity and permeability. The traditional methods usually assume that the fracture reservoir is one set of aligned vertical fractures, embedded in [...] Read more.

In shale gas development, fracture density is an important lithologic parameter to properly characterize reservoir reconstruction, establish a fracturing scheme, and calculate porosity and permeability. The traditional methods usually assume that the fracture reservoir is one set of aligned vertical fractures, embedded in an isotropic background, and estimate some alternative parameters associated with fracture density. Thus, the low accuracy caused by this simplified model, and the intrinsic errors caused by the indirect substitution, affect the estimation of fracture density. In this paper, the fractured rock of monoclinic symmetry assumes two non-orthogonal vertical fracture sets, embedded in a transversely isotropic background. Firstly, assuming that the fracture radius, width, and orientation are known, a new form of P-wave reflection coefficient, in terms of weak anisotropy (WA) parameters and fracture density, was obtained by substituting the stiffness coefficients of vertical transverse isotropic (VTI) background, normal, and tangential fracture compliances. Then, a linear amplitude versus offset and azimuth (AVOA) inversion method, of WA parameters and fracture density, was constructed by using Bayesian theory. Tests on synthetic data showed that WA parameters, and fracture density, are stably estimated in the case of seismic data containing a moderate noise, which can provide a reliable tool in fracture prediction. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

Review

Jump to: Research

20 pages, 8581 KiB

Open AccessReview

Paleomagnetic-Geodynamic Mapping of the Transition Zone from Ocean to the Continent: A Review

by Lev V. Eppelbaum and Youri I. Katz

Appl. Sci. 2022, 12(11), 5419; https://doi.org/10.3390/app12115419 - 27 May 2022

Cited by 3 | Viewed by 1668

Abstract

The easternmost Mediterranean is a distinct transition zone from the ocean to the continent located at the junction between the largest Earth’s lithospheric segments: Eurasian and African. The methodology of paleomagnetic mapping of such transition zones is based on integrating the mapping techniques [...] Read more.

The easternmost Mediterranean is a distinct transition zone from the ocean to the continent located at the junction between the largest Earth’s lithospheric segments: Eurasian and African. The methodology of paleomagnetic mapping of such transition zones is based on integrating the mapping techniques for both continental and oceanic platforms: paleomagnetic reconstructions, results of radiometric dating of magnetized rocks, tectonic-structural reconstructions, biogeography, and utilization of the results of various geophysical surveys. The geodynamic-paleomagnetic mapping makes it possible to reveal the multilevel structural heterogeneity and display complex elements of the geodynamics of different ages inherent in this transition zone. The region of northern Israel is the most complex area in the easternmost Mediterranean. For the combined paleomagnetic mapping, well-studied paleomagnetically and radiometrically areas were selected: (1) the Carmel area, (2) the Atlit area (internal part of the Carmel area), (3) the Sea of Galilee with the adjoining zones (primarily, the Kinnarot Valley), and (4) the area of the Hula Basin with adjacent areas of the Golan Plateau, Hermon Mt., and Galilea uplift. The constructed paleomagnetic profiles for the Carmel area (on the top of the accumulative surface of the Lower Cretaceous traps) and the Kinnarot Valley—Sea of Galilee—Hula Basin, evidently indicate the complex history of the paleogeodynamic evolution of the region. These studies demonstrate the effectiveness of paleomagnetic mapping integrated with paleomagnetic profiles crossing these geologically complex areas. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

16 pages, 6030 KiB

Open AccessEditor’s ChoiceReview

Time-Lapse Electrical Resistivity Tomography (TL-ERT) for Landslide Monitoring: Recent Advances and Future Directions

by Vincenzo Lapenna and Angela Perrone

Appl. Sci. 2022, 12(3), 1425; https://doi.org/10.3390/app12031425 - 28 Jan 2022

Cited by 22 | Viewed by 5119

Abstract

To date, there is a growing interest for challenging applications of time-lapse electrical resistivity tomography (TL-ERT) in Earth sciences. Tomographic algorithms for resistivity data inversion and innovative technologies for sensor networks have rapidly transformed the TL-ERT method in a powerful tool for the [...] Read more.

To date, there is a growing interest for challenging applications of time-lapse electrical resistivity tomography (TL-ERT) in Earth sciences. Tomographic algorithms for resistivity data inversion and innovative technologies for sensor networks have rapidly transformed the TL-ERT method in a powerful tool for the geophysical time-lapse imaging. In this paper, we focus our attention on the application of this method in landslide monitoring. Firstly, an overview of recent methodological advances in TL-ERT data processing and inversion is presented. In a second step, a critical analysis of the main results obtained in different field experiments and lab-scale simulations are discussed. The TL-ERT appears to be a robust and cost-effective method for mapping the water-saturated zones, and for the identification of the groundwater preferential pathways in landslide bodies. Furthermore, it can make a valuable contribution to following time-dependent changes in top-soil moisture, and the spatio-temporal dynamics of wetting fronts during extreme rainfall events. The critical review emphasizes the limits and the advantages of this geophysical method and discloses a way to identify future research activities to improve the use of the TL-ERT method in landslide monitoring. Full article

(This article belongs to the Special Issue Advances in Applied Geophysics)

► Show Figures

Figure 1

Journal Menu

Journal Browser

Advances in Applied Geophysics

Share This Special Issue

Special Issue Editors

Special Issue Information

Keywords

Published Papers (32 papers)

Research

Review

Further Information

Guidelines

MDPI Initiatives

Follow MDPI