Reviewer Board
Members of the reviewer board are selected from all J. Compos. Sci. reviewers for regularly providing timely high quality reports on submitted manuscripts. Responsibilities of reviewers are available here.
Members
Division of Wood Science and Technology, Department of Forest Biomaterials and Technology, Swedish University of Agricultural Sciences, Vallvägen 9C-D 756 51, Uppsala, Sweden
Interests: Wood; Microstructure; ultrastructure; cell wall; fibre morphology; Wood composites; chemical properties; mechanical strength; deterioration; wood water relationships; cellulose; lignin; starch
Interests: Wood; Microstructure; ultrastructure; cell wall; fibre morphology; Wood composites; chemical properties; mechanical strength; deterioration; wood water relationships; cellulose; lignin; starch
Department of Mechanical Engineering, Solid Mechanics Group, Aalto University, Espoo, Finland
Interests: optimization; buckling and post-buckling; variable-stiffness composites; fiber-reinforced composite structures; damage modeling and analysis; creep in composites; filament winding process
Interests: optimization; buckling and post-buckling; variable-stiffness composites; fiber-reinforced composite structures; damage modeling and analysis; creep in composites; filament winding process
Department of Chemistry, Northwestern University
Interests: water treatment; adsorption; polymers; photocatalysts; micropollutants; PFAS
Interests: water treatment; adsorption; polymers; photocatalysts; micropollutants; PFAS
1. Faculty of Mechanical Engineering, Poznan University of Technology, Poznan, Poland
2. Institute of Materials Technology, Piotrowo 3, 61-138 Poznan, Poland
Interests: rheology; composites; waste fillers; biocomposites; thermo-mechanical properties; mechanical properties; extrusion; basalt; DSC; thermal analysis; polyolefin; PLA; polylactide; thermoset; epoxy; Composite; DMA; laminate; fiber-reinforced composites; FRC
2. Institute of Materials Technology, Piotrowo 3, 61-138 Poznan, Poland
Interests: rheology; composites; waste fillers; biocomposites; thermo-mechanical properties; mechanical properties; extrusion; basalt; DSC; thermal analysis; polyolefin; PLA; polylactide; thermoset; epoxy; Composite; DMA; laminate; fiber-reinforced composites; FRC
Department of Applied Science and Technology, Politecnico di Torino, Viale Teresa Michel 5, 15121 Alessandria, Italy
Interests: bio-based; biodegradable; bio-composite; composite; mechanical properties; fire retardancy; fire; TGA; DMTA; DSC; rheology; thermal analysis; natural filler; natural fabric; fiber; cotton; waste; by-products; adhesion; extrusion; reactive extrusion
Interests: bio-based; biodegradable; bio-composite; composite; mechanical properties; fire retardancy; fire; TGA; DMTA; DSC; rheology; thermal analysis; natural filler; natural fabric; fiber; cotton; waste; by-products; adhesion; extrusion; reactive extrusion
Fraunhofer IFAM, Bremen, Germany
Interests: fatigue; simulation; lifetime prediction; dimensioning; adhesive bonding; joining methods
Interests: fatigue; simulation; lifetime prediction; dimensioning; adhesive bonding; joining methods
Virginia Tech, Dept. of Chemical Engineering
Interests: polymer rheology; Composite processing; additive manufacturing; carbon fiber; nanocellulose
Interests: polymer rheology; Composite processing; additive manufacturing; carbon fiber; nanocellulose
University Hasselt
Institute for Materials Research (MPR&S)
Martelarenlaan 42
B-3500 Hasselt
Belgium
Interests: bioplastics, packaging materials, functionalisation, nanoparticles, migration, leaching, food contact materials
Interests: bioplastics, packaging materials, functionalisation, nanoparticles, migration, leaching, food contact materials
E.T.S. de Ingenieros Industriales de Ciudad Real, Universidad de Castilla-La Mancha, Edificio Politécnico. Avda. Camilo José Cela s/n Campus Universitario, 13071 Ciudad Real, Spain
Interests: composite materials; computational mechanics; finite element method; additive manufacturing; digital image correlation; ultrasonic testing; damage analysis; carbon-fibre-reinforced epoxy laminates; non-linear behaviour
Interests: composite materials; computational mechanics; finite element method; additive manufacturing; digital image correlation; ultrasonic testing; damage analysis; carbon-fibre-reinforced epoxy laminates; non-linear behaviour
Polytechnic University of Bari
Interests: experimental mechanics; residual stress; mechanical testing (static, fatigue, impact)
Interests: experimental mechanics; residual stress; mechanical testing (static, fatigue, impact)
Professor of Structural Engineering and Bridge Design
Convenor of HGB (Horizontal Group Bridges) CEN/TC250 "Structural Eurocodes"
Convenor of Ad Hoc Group "Crane supporting structures" CEN/TC250 "Structural Eurocodes"
Department of Civil and Industrial Engineering
University of Pisa
Interests: fatigue; Civil Engineering; vibrations; reinforced concrete; Fiber reinforced concrete; finite element method; non-linear analysis, modeling and testing; structural health monitoring; structural safety; structural reliability; structural mechanics; construction and building materials; structural strengthening and repair
Interests: fatigue; Civil Engineering; vibrations; reinforced concrete; Fiber reinforced concrete; finite element method; non-linear analysis, modeling and testing; structural health monitoring; structural safety; structural reliability; structural mechanics; construction and building materials; structural strengthening and repair
University of Perugia
Interests: sustainability materials; construction materials; engineered materials; Earthquake Engineering; fire engineering
Interests: sustainability materials; construction materials; engineered materials; Earthquake Engineering; fire engineering
North Carolina State University & University of North Carolina at Chapel Hill
Interests: biomaterials; nanocomposites; hydrogels; biosensors; bioelectronics
Interests: biomaterials; nanocomposites; hydrogels; biosensors; bioelectronics
UCAM San Antonio Catholic University of Murcia
Av. de los Jerónimos, 135, Guadalupe de Maciascoque
Murcia-30107, Spain
Mobile:+34 603597596
Interests: biomaterials; collagen; chitosan; bone engineering; biocompatibility; tissue engineering; protein chemistry; cell biology; micobiology; biotechnology
Interests: biomaterials; collagen; chitosan; bone engineering; biocompatibility; tissue engineering; protein chemistry; cell biology; micobiology; biotechnology
University of Padova, Department of Civil, Environmental and Architectural Engineering
Interests: reinforced concrete; FRCM; recycled concrete; seismic vulnerability; sustainable concrete
Interests: reinforced concrete; FRCM; recycled concrete; seismic vulnerability; sustainable concrete
Centre for Future Materials, University of Southern Queensland, Toowoomba, QLD 4350, Australia
Interests: Carbon Fibers; fiberglass; natural fibers; physical properties of fibers
Interests: Carbon Fibers; fiberglass; natural fibers; physical properties of fibers
Institut de Recherche Dupuy de Lôme (IRDL), Université Bretagne Sud, UMR CNRS 6027, IRDL, F-56100 Lorient, France
Interests: multiscale heterogeneous materials homogenization methods; micro / nano-structured and heterogeneous materials (foams, fiber suspensions, passive and active colloids, hemp concretes, fibered concretes...); rheology of micro-structured complex fluids (constitutive laws, numerical simulations, experimental tests...); composite polymer processing (injection, extrusion...); additive manufacturing of composites (automated placement of prepregs, 3D printing...); numerical modeling and multiphysics coupling (fluid-structure interaction, heat transfert, microstructure evolution...)
Interests: multiscale heterogeneous materials homogenization methods; micro / nano-structured and heterogeneous materials (foams, fiber suspensions, passive and active colloids, hemp concretes, fibered concretes...); rheology of micro-structured complex fluids (constitutive laws, numerical simulations, experimental tests...); composite polymer processing (injection, extrusion...); additive manufacturing of composites (automated placement of prepregs, 3D printing...); numerical modeling and multiphysics coupling (fluid-structure interaction, heat transfert, microstructure evolution...)
Security Technologies Group, Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, MD 20899
Interests: nanocomposites; Fiber Reinforced Composites; polymers; fracture mechanics; non-linear materials; impact mitigating materials; dynamic properties
Interests: nanocomposites; Fiber Reinforced Composites; polymers; fracture mechanics; non-linear materials; impact mitigating materials; dynamic properties
Department of Mechanical Engineering, The University of Melbourne, Parkville, VIC 3010, Australia
Interests: solid; AMP; structural mechanics; composite structures; smart materials; structures; dynamics and vibrations; bio-signal/mechanics; plates and shells; optimizations; additive manufacturing
Interests: solid; AMP; structural mechanics; composite structures; smart materials; structures; dynamics and vibrations; bio-signal/mechanics; plates and shells; optimizations; additive manufacturing
Manufacturing Demonstration Facility (MDF), Oak Ridge National Laboratory
Interests: composite manufacturing; discontinues reinforced composite; additive manufacturing; 3D printing; large format additive manufacturing; thermoplastic composites; long fiber thermoplastics; nondestructive testing and evaluation
Interests: composite manufacturing; discontinues reinforced composite; additive manufacturing; 3D printing; large format additive manufacturing; thermoplastic composites; long fiber thermoplastics; nondestructive testing and evaluation
Department of Polymer Technology, Gdańsk University of Technology, 11/12, 80-233 Gdańsk, Poland
Interests: polyurethanes; extrusion; wood-polymer composites; lignocellulose filler; filler modification; recycling; ground tire rubber; Polymer Composites; polyurethane foams; reactive extrusion; mechanical properties; dynamic mechanical analysis
Interests: polyurethanes; extrusion; wood-polymer composites; lignocellulose filler; filler modification; recycling; ground tire rubber; Polymer Composites; polyurethane foams; reactive extrusion; mechanical properties; dynamic mechanical analysis
University of Applied Sciences Upper Austria
Interests: composite material; Structural Analysis; process simulation; material modelling; composite manufacturing; lightweight design
Interests: composite material; Structural Analysis; process simulation; material modelling; composite manufacturing; lightweight design
School of Engineering, RMIT University, Melbourne, Australia
Interests: polymer composite; Nanocomposite; medical and smart textiles; biomaterials
Interests: polymer composite; Nanocomposite; medical and smart textiles; biomaterials
National Kaohsiung University of Science and Technology, Kaohsiung, Taiwan
Interests: Nanoparticles
Interests: Nanoparticles
Department of Electro-Optical Engineering, National United University, Taiwan
Interests: liquid crystal device; photonic device; optic fiber sensor; biosensor
Interests: liquid crystal device; photonic device; optic fiber sensor; biosensor
School of Nanoscience and Technology, Shivaji University Kolhapur, Maharashtra, India
Interests: polymer synthesis; Polymer Nanocomposites; Silica Nanoparticles; composite materials for various applications
Interests: polymer synthesis; Polymer Nanocomposites; Silica Nanoparticles; composite materials for various applications
General Motors Global Research and Development, 30500 Mound Road, Warren, MI 48090, USA
Interests: nondestructive evaluation; structural health monitoring; composites; CFRP; eddy current testing; Ultrasonics; acoustics; aerospace; guided wave; Wave Propagation; impact damage; BVID; barely visible impact damage; ultrasonic nondestructive evaluation; XCT
Interests: nondestructive evaluation; structural health monitoring; composites; CFRP; eddy current testing; Ultrasonics; acoustics; aerospace; guided wave; Wave Propagation; impact damage; BVID; barely visible impact damage; ultrasonic nondestructive evaluation; XCT
University of South Carolina
Interests: membrane; catalyst; adsorption; water treatment
Interests: membrane; catalyst; adsorption; water treatment
Department of Electrical and Computer Engineering, University of California, Riverside, CA, USA
Interests: thermal interface materials; Polymer Composites; Thermal Conductivity; EMI shielding; Electrical conductivity; Phonon; Raman light scattering; brillouin light scattering; graphene; 2d materials
Interests: thermal interface materials; Polymer Composites; Thermal Conductivity; EMI shielding; Electrical conductivity; Phonon; Raman light scattering; brillouin light scattering; graphene; 2d materials
Institute for Frontier Materials (IFM), Deakin University, Geelong, Australia
Interests: physical simulation of forming; composite metals; hybrid metal composite interface characterization; hot deformation; constitutive behaviour; friction and contact in metal formin
Interests: physical simulation of forming; composite metals; hybrid metal composite interface characterization; hot deformation; constitutive behaviour; friction and contact in metal formin
