State-of-the-Art of Catalytical Technology in China

A special issue of Catalysts (ISSN 2073-4344).

Deadline for manuscript submissions: closed (30 October 2021) | Viewed by 6902

Special Issue Editors


E-Mail Website
Guest Editor
Department of Chemistry, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Fudan University, Shanghai 200438, China
Interests: heterogeneous catalysis; solid-acid catalysis; redox catalysis; zeolites; mesoporous materials; carbon-based catalysts
Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, China
Interests: heterogeneous catalysis; C1 chemistry; biomass conversion; carbon utilization; gasification; pyrolysis

Special Issue Information

Dear Colleagues,

Recent decades have seen a rapid growth in catalytic science and technology in China. Notable contributions to many fields have been made, including but not limited to the optimal utilization of coal, petroleum and natural gas, green synthesis of advanced materials, and protection of the environment as well as human health. This Special Issue welcomes both review and original research articles on all aspects of heterogeneous and homogeneous catalysis, with an emphasis on fundamental and applied research implemented across China. Collaborative work between Chinese and non-Chinese partners is also welcome. Topics include, but are not limited to, the following:

C1 chemistry;

Conversion of C2-C5 paraffins;

Electrocatalysis and photocatalysis;

Environmental catalysis;

Conversion of biomass and biomass-derived molecules;

Catalyst characterization;

Catalysis for chemical synthesis;

In situ and operando analysis;

Catalyst deactivation;

Theory and computation in catalysis;

Reaction engineering;

Cross-cutting topic in catalysis.

Prof. Dr. Yinghong Yue
Dr. Hong Du
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Catalysts is an international peer-reviewed open access monthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2700 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • VOCs oxidation
  • Selective catalytic reduction
  • Wastewater treatment
  • Photocatalysis
  • Energy
  • Selective oxidation
  • Hydrogenation/dehydrogenation
  • Oxygen evolution reaction
  • Hydrogen production
  • Solar-to-fuel process
  • Biorefinery process
  • Carbon dioxide
  • Syngas
  • Nanomaterials
  • Zeolites
  • Operando spectroscopy.

Published Papers (3 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

13 pages, 4243 KiB  
Article
Pre-Coking Strategy Strengthening Stability Performance of Supported Nickel Catalysts in Chloronitrobenzene Hydrogenation
by Ping Wang, Shiyi Wang, Ronghe Lin, Xiaoling Mou and Yunjie Ding
Catalysts 2021, 11(10), 1156; https://doi.org/10.3390/catal11101156 - 26 Sep 2021
Cited by 2 | Viewed by 2375
Abstract
Supported nickel catalysts represent a class of important catalytic materials in selective hydrogenations, but applications are frequently limited by metal agglomeration or active-site blocking induced by the presence of hydrogen halides. Herein, we report a novel pre-coking strategy, exposing the nickel nanoparticles under [...] Read more.
Supported nickel catalysts represent a class of important catalytic materials in selective hydrogenations, but applications are frequently limited by metal agglomeration or active-site blocking induced by the presence of hydrogen halides. Herein, we report a novel pre-coking strategy, exposing the nickel nanoparticles under methane dry reforming conditions to manipulate performance in the continuous-flow hydrogenation of 1,2-dichloro-4-nitrobenzene. Compared with the pristine nickel catalyst, the nanotube-like coke-modified nickel catalyst showed weakened hydrogenating ability, but much improved stability and slightly better selectivity to the target product, 3,4-dichloroaniline. Characterization results revealed that the strengthened stability performance can be mainly linked to the reduced propensity to retain chlorine species, which seems to block the access of the substrate molecules to the active sites, and thus is a major cause of catalyst deactivation on the pristine nickel catalyst. Coke deposition can occur on the pre-coked nickel catalyst but not on the pristine analog; however, the impact on the stability performance is much milder compared with that on chlorine uptake. In addition, the presence of coke is also beneficial in restraining the growth of the nickel nanoparticles. Generally, the developed method might provide an alternative perspective on the design of novel transition-metal-based catalytic materials for other hydrogenation applications under harsh conditions. Full article
(This article belongs to the Special Issue State-of-the-Art of Catalytical Technology in China)
Show Figures

Figure 1

13 pages, 3427 KiB  
Article
The Effect of Gold Nanoparticles on the Catalytic Activity of NiTiO3 for Hydrodeoxygenation of Guaiacol
by Bin Zhao, Guanghui Zhang, Jingbo Mao, Yanli Wang, Hong Yang and Xinwen Guo
Catalysts 2021, 11(8), 994; https://doi.org/10.3390/catal11080994 - 19 Aug 2021
Cited by 3 | Viewed by 1973
Abstract
Guaiacol is a typical model compound used to investigate and understand the hydrodeoxygenation behaviour of bio-oils, which is critical to their application as an alternative to fossil resources. While extensive research has been carried out on developing catalysts for guaiacol hydrodeoxygenation, the true [...] Read more.
Guaiacol is a typical model compound used to investigate and understand the hydrodeoxygenation behaviour of bio-oils, which is critical to their application as an alternative to fossil resources. While extensive research has been carried out on developing catalysts for guaiacol hydrodeoxygenation, the true active sites in these catalysts are often illusive. This study investigated the effect of Au-loading on the catalytic activity of NiTiO3 for the hydrodeoxygenation of guaiacol. It showed that metallic Ni formed by the partial reduction in NiTiO3 was responsible for its catalytic activity. Au-loading in NiTiO3 effectively reduces the temperature required for the NiTiO3 reduction from 400 °C to 300 °C. Consequently, at an Au-loading of 0.86 wt%, the 0.86 Au/NiTiO3-300 °C catalyst was found to deliver a guaiacol conversion of ~32%, more than 6 times higher than that of the pure NiTiO3-300 °C catalyst. Full article
(This article belongs to the Special Issue State-of-the-Art of Catalytical Technology in China)
Show Figures

Figure 1

13 pages, 3581 KiB  
Article
Nanosheet-Like Ho2O3 and Sr-Ho2O3 Catalysts for Oxidative Coupling of Methane
by Yuqiao Fan, Changxi Miao, Yinghong Yue, Weiming Hua and Zi Gao
Catalysts 2021, 11(3), 388; https://doi.org/10.3390/catal11030388 - 18 Mar 2021
Cited by 6 | Viewed by 1871
Abstract
In this work, Ho2O3 nanosheets were synthesized by a hydrothermal method. A series of Sr-modified Ho2O3 nanosheets (Sr-Ho2O3-NS) with a Sr/Ho molar ratio between 0.02 and 0.06 were prepared via an impregnation method. [...] Read more.
In this work, Ho2O3 nanosheets were synthesized by a hydrothermal method. A series of Sr-modified Ho2O3 nanosheets (Sr-Ho2O3-NS) with a Sr/Ho molar ratio between 0.02 and 0.06 were prepared via an impregnation method. These catalysts were characterized by several techniques such as XRD, N2 adsorption, SEM, TEM, XPS, O2-TPD (temperature-programmed desorption), and CO2-TPD, and they were studied with respect to their performances in the oxidative coupling of methane (OCM). In contrast to Ho2O3 nanoparticles, Ho2O3 nanosheets display greater CH4 conversion and C2-C3 selectivity, which could be related to the preferentially exposed (222) facet on the surface of the latter catalyst. The incorporation of small amounts of Sr into Ho2O3 nanosheets leads to a higher ratio of (O + O2)/O2− as well as an enhanced amount of chemisorbed oxygen species and moderate basic sites, which in turn improves the OCM performance. The optimal catalytic behavior is achievable on the 0.04Sr-Ho2O3-NS catalyst with a Sr/Ho molar ratio of 0.04, which gives a 24.0% conversion of CH4 with 56.7% selectivity to C2-C3 at 650 °C. The C2-C3 yield is well correlated with the amount of moderate basic sites present on the catalysts. Full article
(This article belongs to the Special Issue State-of-the-Art of Catalytical Technology in China)
Show Figures

Graphical abstract

Back to TopTop