Polymers

Research

Jump to: Review

18 pages, 10597 KiB

Open AccessArticle

Effect of Carbon Nanofiber Distribution on Mechanical Properties of Injection-Molded Aramid-Fiber-Reinforced Polypropylene

by Tetsuo Takayama, Shunsuke Kobayashi, Yuuki Yuasa and Quan Jiang

Polymers 2024, 16(8), 1110; https://doi.org/10.3390/polym16081110 - 16 Apr 2024

Viewed by 735

Abstract

The mechanical recycling of discarded plastic products as resources for environmental preservation has recently gained research attention. In this context, it is necessary to use waste materials for fiber-reinforced thermoplastics (FRTP). Glass and carbon fibers are often damaged by shear and compression during [...] Read more.

The mechanical recycling of discarded plastic products as resources for environmental preservation has recently gained research attention. In this context, it is necessary to use waste materials for fiber-reinforced thermoplastics (FRTP). Glass and carbon fibers are often damaged by shear and compression during melt-forming processes. To achieve a sustainable society, it is necessary for thermal recycling to produce minimal to no residue and for mechanical recycling to maintain the length of fibers used in FRTP to preserve their performance as a reinforcing agent. Aramid fibers (AFs) do not shorten during the melt-molding process, and their composites have excellent impact strength. On the other hand, plastics reinforced with glass or carbon fibers are reported to have a superior strength and modulus of elasticity compared to aramid fibers. This study investigates the dispersion of a carbon nanofiber (CNF), a whisker, as the third component in aramid-fiber-reinforced polypropylene (PP/AF). The results and discussion sections demonstrate how the dispersion of CNF in PP/AF can enhance the mechanical properties of injection-molded products without compromising their impact resistance. The proposed composition will have excellent material recyclability and initial mechanical properties compared to glass-fiber-reinforced thermoplastics. Full article

(This article belongs to the Special Issue Processing, Characterization and Engineering Application of Fiber-Reinforced Thermoplastic Polymer Composites)

► Show Figures

Graphical abstract

14 pages, 5456 KiB

Open AccessEditor’s ChoiceArticle

Press Conduction Welding for Secondary Bonding of Aircraft Skin/Stiffener Assemblies Using Carbon Fiber/PEKK Thermoplastic Composites and PEI Adhesive

by Hyunseok Choi, Chan-Joo Lee, Yong-Jun Jeon, Woo-Chun Choi and Dongearn Kim

Polymers 2024, 16(6), 750; https://doi.org/10.3390/polym16060750 - 09 Mar 2024

Viewed by 539

Abstract

This study investigates the secondary bonding of aircraft skin/stiffener assemblies using press conduction welding with carbon fiber/polyetherketoneketone thermoplastic composites and polyetherimide adhesive. Recognizing the challenges posed by conventional welding methods in maintaining material integrity and uniformity, this research explores an alternative methodology that [...] Read more.

This study investigates the secondary bonding of aircraft skin/stiffener assemblies using press conduction welding with carbon fiber/polyetherketoneketone thermoplastic composites and polyetherimide adhesive. Recognizing the challenges posed by conventional welding methods in maintaining material integrity and uniformity, this research explores an alternative methodology that mitigates these issues while ensuring high-strength bonds. The press conduction welding parameters were selected based on single-lap shear tests and applied in the bonding of skin and omega stiffener components. The temperature range was determined using differential scanning calorimetry. The pressure was held at 1 MPa for 180 s. The welding temperature that produced a high-bonding strength was identified experimentally; these key variables were then used in the welding process of the skin and omega stiffener. By analyzing how the fibers tear and the effectiveness of interdiffusion between the plies, we were able to gain insights into the bonding strength and fractured surface. The findings suggest that press conduction welding provides a viable route for secondary bonding in thermoplastic composite structures, highlighting its advantages in terms of processing efficiency and integrity. This study contributes to the understanding of the mechanical behaviors of bonded joints and underscores the significance of temperature control in the welding process. Full article

(This article belongs to the Special Issue Processing, Characterization and Engineering Application of Fiber-Reinforced Thermoplastic Polymer Composites)

► Show Figures

Figure 1

15 pages, 6595 KiB

Open AccessArticle

Extraction of Lightweight Platanus orientalis L. Fruit’s Stem Fiber and Determination of Its Mechanical and Physico-Chemical Properties and Potential of Its Use in Composites

by Ali Ihsan Kaya

Polymers 2024, 16(5), 657; https://doi.org/10.3390/polym16050657 - 28 Feb 2024

Viewed by 481

Abstract

Natural fibers extracted from plants are preferred as an alternative to synthetic products. The main reasons for this preference are their affordable cost, light weight and good mechanical properties. However, finding new natural raw materials is challenging due to growth limitations in different [...] Read more.

Natural fibers extracted from plants are preferred as an alternative to synthetic products. The main reasons for this preference are their affordable cost, light weight and good mechanical properties. However, finding new natural raw materials is challenging due to growth limitations in different geographical areas. Platanus orientalis L. (Eastern plane tree) is a tree with abundant fruits that can grow in many regions of the world. The aim of this study was to determine the mechanical (tensile strength, tensile modulus, elongation), physical (density, fiber diameter) and chemical (cellulose, hemicellulose and lignin) properties of Platanus orientalis L. fruit’s stem by fiber extraction from the stems of the tree. It was determined that the extracted fiber had good mechanical properties and cellulose content of 42.03%. As a result of thermogravimetric analysis, it was determined that the plane tree fruit’s stem fiber had thermal resistance of up to 299 °C. The tensile strength value was 157.76 MPa, the tensile modulus value was 1.39 GPa and the elongation value was 22.01%. It was determined that it is suitable for use in fiber reinforcement in thermoplastic-based composites at temperatures below 299 °C. According to the results obtained by the mechanical, chemical and physical analysis of Platanus orientalis L. fruit’s stem fiber (PoLfs), it could be recommended as a suitable alternative as a reinforcing fiber in thermoplastic and thermoset composites. Full article

(This article belongs to the Special Issue Processing, Characterization and Engineering Application of Fiber-Reinforced Thermoplastic Polymer Composites)

► Show Figures

Figure 1

14 pages, 5169 KiB

Open AccessEditor’s ChoiceArticle

Evaluation of the Mechanical and Tribological Behavior of Polyether Ether Ketone Fiber-Reinforced Resin-Based Friction Materials Fabricated by Wet Granulation

by Lekai Li, Zichao Ma, Guoqin Liu, Wei Song, Lili Ren, Shengwang Yuan, Xiao Yang, Qifeng Zhang and Yunhai Ma

Polymers 2023, 15(24), 4732; https://doi.org/10.3390/polym15244732 - 18 Dec 2023

Viewed by 743

Abstract

Resin-based friction materials (RBFMs) strengthened by polyether ether ketone (PEEK) fiber were designed and prepared in this study. Specimens incorporating PEEK fiber of 2–8 wt.% were fabricated based on wet granulation, and then the effects of the PEEK fiber content on the mechanical [...] Read more.

Resin-based friction materials (RBFMs) strengthened by polyether ether ketone (PEEK) fiber were designed and prepared in this study. Specimens incorporating PEEK fiber of 2–8 wt.% were fabricated based on wet granulation, and then the effects of the PEEK fiber content on the mechanical and tribological properties of RBFMs were systematically investigated. The results showed that PEEK fiber can sense the braking temperature and then effectively regulate the comprehensive properties of RBFMs. The specimen incorporating 6 wt.% PEEK fiber obtained the optimal comprehensive performance with a stable friction coefficient (COF), excellent fade resistance and recovery properties, and better wear resistance. The worn surface was inspected using a scanning electron microscope. After the friction–wear test, the specimen with 6 wt.% PEEK fiber presented a number of primary and secondary plateaus and a reduced number of pits with wear debris on the worn surface. The study indicated that PEEK fiber could not only enhance the mechanical and tribological properties of RBFMs at low temperatures because of their high strength and self-lubrication but also adhere to wear debris to reduce abrasive wear at high temperatures; furthermore, the adhered wear debris could form a secondary plateau under normal pressure, which could alleviate abrasion. Full article

(This article belongs to the Special Issue Processing, Characterization and Engineering Application of Fiber-Reinforced Thermoplastic Polymer Composites)

► Show Figures

Figure 1

14 pages, 3592 KiB

Open AccessArticle

Increasing Bending Strength of Polycarbonate Reinforced by Carbon Fiber Irradiated by Electron Beam

by Yoshitake Nishi, Naruya Tsuyuki, Helmut Takahiro Uchida, Michael C. Faudree, Kouhei Sagawa, Masae Kanda, Yoshihito Matsumura, Michelle Salvia and Hideki Kimura

Polymers 2023, 15(22), 4350; https://doi.org/10.3390/polym15224350 - 08 Nov 2023

Viewed by 1030

Abstract

In an interlayered carbon fiber-reinforced polycarbonate polymer (CFRPC) composite composed of three sized of CF plies, alternating between four PC sheets, designated [PC]₄[CF]₃, and a new process of activating CF cross-weave cloth plies directly on both sides with homogeneous [...] Read more.

In an interlayered carbon fiber-reinforced polycarbonate polymer (CFRPC) composite composed of three sized of CF plies, alternating between four PC sheets, designated [PC]₄[CF]₃, and a new process of activating CF cross-weave cloth plies directly on both sides with homogeneous low-energy electron beam irradiation (HLEBI) before lamination assembly and hot pressing at 6.0 MPa and 537 K for 8 min was produced. Experimental results show that a dose of 215 kGy of HLEBI raised the bending strength, σ_b, at each experimental accumulative probability, P_a, with the σ_b at a median P_a of 0.50, increasing by 25% over that of the untreated sample. Three-parameter Weibull analysis showed that when quality can be controlled, a dose of 215 kGy of HLEBI can raise the statistically lowest bending strength, σ_s, at P_a = 0 (94.3 Mpa), with a high correlation coefficient. This is because, although it had a higher bending strength than that in the other experimental conditions, the weakest sample of the 215 kGy data set had a much lower σ_b value than that of the others. Electron spin resonance (ESR) of the CF showed that naturally occurring dangling bonds in CF were increased at 215 kGy. Charge transfer to the PC occurs, apparently generating stronger bonds, which are possibly covalent, resulting in enhanced adhesion at the CF–PC interface. Full article

(This article belongs to the Special Issue Processing, Characterization and Engineering Application of Fiber-Reinforced Thermoplastic Polymer Composites)

► Show Figures

Figure 1

15 pages, 11478 KiB

Open AccessArticle

Analysis of Mechanical Properties and Structural Analysis According to the Multi-Layered Structure of Polyethylene-Based Self-Reinforced Composites

by Seonghun Yu, Junhee Lee, Jongkyu Kim, Hojong Chang, Chansol Kang and Jeehyun Sim

Polymers 2023, 15(20), 4055; https://doi.org/10.3390/polym15204055 - 11 Oct 2023

Cited by 2 | Viewed by 1631

Abstract

In this research, a self-reinforced composite material was manufactured using a single polyethylene material, and this self-reinforced composite material has excellent recyclability and is environmentally friendly compared to composite materials composed of other types of material, such as glass fiber reinforced composites (GFRP) [...] Read more.

In this research, a self-reinforced composite material was manufactured using a single polyethylene material, and this self-reinforced composite material has excellent recyclability and is environmentally friendly compared to composite materials composed of other types of material, such as glass fiber reinforced composites (GFRP) and carbon fiber reinforced composites (CFRP). In this research, the manufactured self-reinforced composite material consists of an outer layer and an inner layer. To manufacture the outer layer, low density polyethylene (LDPE) films were laminated on high density polyethylene (HDPE) fabrics and knitted fabrics, and composite materials were prepared at various temperatures using hot stamping. A 3D printing process was utilized to manufacture the inner layer. After designing a structure with a cross-sectional shape of a triangle, circle, or hexagon, the inner layer structure was manufactured by 3D printing high-density polyethylene material. As an adhesive film for bonding the outer layer and the inner layer, a polyethylene-based self-reinforced composite material was prepared using a low-density polyethylene material. Input data for simulation of self-reinforced composite materials were obtained through tensile property analysis using a universal testing machine (UTM, Shimadzu, Kyoto, Japan), and the physical property values derived as output data and actual experimental values were obtained. As a result of the comparison, the error rate between simulation data and experimental data was 5.4% when the shape of the inner layer of self-reinforced composite material was a hexagon, 3.6% when it was a circle, and 7.8% when a triangular shape showed the highest value. Simulation in a virtual space can reduce the time and cost required for actual research and can be important data for producing high-quality products. Full article

(This article belongs to the Special Issue Processing, Characterization and Engineering Application of Fiber-Reinforced Thermoplastic Polymer Composites)

► Show Figures

Figure 1

11 pages, 3866 KiB

Open AccessArticle

ZnO Treatment on Mechanical Behavior of Polyethylene/Yellow Birch Fiber Composites When Exposed to Fungal Wood Rot

by Kodjovi Kekeli Agbozouhoue, Demagna Koffi, Fouad Erchiqui and Simon Barnabé

Polymers 2023, 15(18), 3664; https://doi.org/10.3390/polym15183664 - 06 Sep 2023

Cited by 1 | Viewed by 656

Abstract

Wood plastic composite (WPC) usage and demand have increased because of its interesting chemical and mechanical properties compared to other plastic materials. However, there is a possibility of structural and mechanical changes to the material when exposed to the external environment; most research [...] Read more.

Wood plastic composite (WPC) usage and demand have increased because of its interesting chemical and mechanical properties compared to other plastic materials. However, there is a possibility of structural and mechanical changes to the material when exposed to the external environment; most research on wood plastic is performed on the material with elevated fiber content (40–70%). Therefore, more research needs to be performed regarding these issues, especially when the fiber content of the WPC is low. In this study, composite materials composed of high-density polyethylene (HDPE) reinforced with yellow birch fibers (20 and 30%) were made by injection molding. The fibers were treated with dissolved zinc oxide (ZnO) powder in sodium oxide (NaOH) solution, and the fabricated material was exposed to fungal rot. ZnO treatment in this case is different from most studies because ZnO nanoparticles are usually employed. The main reason was to obtain better fixation of ZnO on the fibers. The mechanical properties of the composites were assessed by the tensile and Izod impact tests. The impact energies of the samples fabricated with ZnO-treated fibers and exposed to Gloephyllum trabeum and Trametes versicolor decreased, when compared to samples fabricated with ZnO-nontreated fibers. The mechanical properties of the samples composed of ZnO-treated fibers and exposed to rot decreased, which were reported by a decreased Young’s modulus and impact energies. The usage of ZnO treatment prevented mycelium proliferation, which was nonexistent on the samples. It has been noted that the decrease in mechanical properties of the treated samples was because of the action of NaOH used to dissolve the ZnO powder. Full article

(This article belongs to the Special Issue Processing, Characterization and Engineering Application of Fiber-Reinforced Thermoplastic Polymer Composites)

► Show Figures

Figure 1

17 pages, 6666 KiB

Open AccessEditor’s ChoiceArticle

Enhancement of the Mechanical Performance of Glass-Fibre-Reinforced Composites through the Infusion Process of a Thermoplastic Recyclable Resin

by Raffaele Ciardiello, Dario Fiumarella and Giovanni Belingardi

Polymers 2023, 15(15), 3160; https://doi.org/10.3390/polym15153160 - 25 Jul 2023

Cited by 2 | Viewed by 1107

Abstract

Mechanical testing of glass-fibre-reinforced composite (GFRP) plates made of twill fabric and a thermoplastic recyclable infusion resin is presented. The considered thermoplastic resin, ELIUM^®, is made of poly-methylmethacrylate and can be infused with properly tuned vacuum techniques, in the same manner [...] Read more.

Mechanical testing of glass-fibre-reinforced composite (GFRP) plates made of twill fabric and a thermoplastic recyclable infusion resin is presented. The considered thermoplastic resin, ELIUM^®, is made of poly-methylmethacrylate and can be infused with properly tuned vacuum techniques, in the same manner as all liquid resin. Tensile, flexural, and drop-dart impact tests were carried out to assess the mechanical properties of the composites considering different fabrication conditions, such as the different degassing pressure before infusion and three different infusion vacuum pressures. The work reports a methodology to infuse ELIUM resin at a relatively high vacuum pressure of 0.8 bar. X-ray microtomography analysis showed that the produced laminates are free of defects, differently from what was reported in the literature, where void problems related to a vacuum infusion pressure higher than 0.3–0.5 bar were pointed out. Vacuum pressure values influence the mechanical characteristics of the laminate: when higher vacuum pressures are adopted, the mechanical properties of the GFRP laminates are enhanced and higher values of elastic modulus and strength are obtained. On the other hand, degassing the resin before infusion does not influence the mechanical properties of the laminates. A maximum bending and tensile strength of 420 and 305 MPa were reached by using the vacuum infusion of 0.8 bar with an elastic modulus of 18.5 and 20.6 GPa, respectively. The density of the produced laminates increases at higher vacuum infusion pressure up to a maximum value of 1.81 g/cm³ with the fibre volume fraction of each laminate. Full article

(This article belongs to the Special Issue Processing, Characterization and Engineering Application of Fiber-Reinforced Thermoplastic Polymer Composites)

► Show Figures

Figure 1

18 pages, 4425 KiB

Open AccessArticle

Research on the Heating Process of CFRP Circular Tubes Based on Electromagnetic Induction Heating Method

by Jiazhong Xu, Yunfei Gu, Tianyu Fu, Xiaobing Zhang and Hao Zhang

Polymers 2023, 15(14), 3039; https://doi.org/10.3390/polym15143039 - 14 Jul 2023

Cited by 1 | Viewed by 1023

Abstract

Based on the electromagnetic induction heating method, heating and curing of Carbon Fiber Reinforced Polymer (CFRP) have the advantages of high energy utilization and no pollution. However, in the heating process, both the material weaving structure and mold material can affect the temperature [...] Read more.

Based on the electromagnetic induction heating method, heating and curing of Carbon Fiber Reinforced Polymer (CFRP) have the advantages of high energy utilization and no pollution. However, in the heating process, both the material weaving structure and mold material can affect the temperature field. Therefore, in this study, an electromagnetic heating finite element analysis model for CFRP circular tubes was established based on the equivalent electromagnetic thermal characteristics of CFRP. The study investigated the temperature rise mechanism of the material weaving structure under the magnetic field, and explored in-depth the influence of molds made of 45# steel and glass fiber-reinforced plastic (FRP) on the heating process of CFRP. The CFRP circular tubes with weaving structures of 89-degree winding angle, 45-degree winding angle, and plain weave were studied. The study found that when the metal mold was heated, the CFRP structure had almost no effect on the temperature distribution. However, when the glass fiber-reinforced plastic mold was heated, the temperature field changed with the CFRP structure, and the more fiber cross points, the more uniform the temperature field. The accuracy of the finite element model was verified through experiments. The aim of this research is to provide theoretical guidance for actual industrial production. Full article

(This article belongs to the Special Issue Processing, Characterization and Engineering Application of Fiber-Reinforced Thermoplastic Polymer Composites)

► Show Figures

Figure 1

Review

Jump to: Research

23 pages, 4307 KiB

Open AccessReview

Experimental Studies and Application of Fiber-Reinforced Polymers (FRPs) in Civil Infrastructure Systems: A State-of-the-Art Review

by Jorge Albuja-Sánchez, Andreina Damián-Chalán and Daniela Escobar

Polymers 2024, 16(2), 250; https://doi.org/10.3390/polym16020250 - 16 Jan 2024

Viewed by 1210

Abstract

The application of FRPs in civil infrastructure has increased, particularly in the last 20 years. FRPs have gained importance because of their resistance to harsh environments, high strength-to-weight ratio, and good corrosion resistance, and they are faster and easier to apply than other [...] Read more.

The application of FRPs in civil infrastructure has increased, particularly in the last 20 years. FRPs have gained importance because of their resistance to harsh environments, high strength-to-weight ratio, and good corrosion resistance, and they are faster and easier to apply than other traditional methods. The rehabilitation of structures is the main area in which FRPs have been developed, because they have allowed for compliance with architectural restraints in historic structures. This review is a compilation of the research conducted on the laboratory and field applications of FRPs, highlighting the different applied methods, installation difficulties, and failure modes of FRPs. Moreover, this review compares studies on the types of fibers such as CFRPs, GFRPs, and AFRPs, and their effects would affect the mechanical properties of civil infrastructure and the durability characteristics of civil infrastructure in challenging environmental conditions. In addition, this review focuses on the modification of the mechanical properties of structural elements using different methods of installing FRPs, including externally bonded reinforcement (EBR), and their main problem: debonding failure before the ultimate load. Full article

(This article belongs to the Special Issue Processing, Characterization and Engineering Application of Fiber-Reinforced Thermoplastic Polymer Composites)

► Show Figures

Figure 1

Journal Menu

Journal Browser

Processing, Characterization and Engineering Application of Fiber-Reinforced Thermoplastic Polymer Composites

Share This Special Issue

Special Issue Editor

Special Issue Information

Published Papers (10 papers)

Research

Review

Further Information

Guidelines

MDPI Initiatives

Follow MDPI