Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
4.5
2.7
Journals
Applied Sciences
Special Issues
Sustainable Materials and Waste Recovery
share announcement

Sustainable Materials and Waste Recovery

A special issue of Applied Sciences (ISSN 2076-3417). This special issue belongs to the section "Materials Science and Engineering".

Deadline for manuscript submissions: closed (31 January 2024) | Viewed by 2761

Special Issue Editors

Prof. Dr. Valentin Romanovski

E-Mail Website
Guest Editor
Research Scientist, Materials Science and Engineering Department, University of Virginia, Charlottesville, VA 22904, USA
Interests: recycling of industrial wastes; water and wastewater treatment; surface disinfection; corrosion/materials degradation; electrochemistry; nanotechnology in water treatment and catalysis; pyrolysis of wastes; synthesis and characterization of advanced materials; engineering failure analysis; feasibility studies
Prof. Dr. Xintai Su

E-Mail Website
Guest Editor
School of Environment and Energy, South China University of Technology, Guangzhou 510006, China
Interests: solid waste treatment; biomass organic solid waste treatment; chromium slag treatment; humic acid fertilizer
Dr. Haitao Wang

E-Mail Website
Guest Editor
College of Environmental Science and Engineering, Nankai University, Tianjin 300350, China
Interests: groundwater and soil redmediation; eco-materials for environmental application; PFAS; advanced oxidation processes for water treatment; photo- and electrocatalytic water treatment; resources recycling and sustainability
Special Issues, Collections and Topics in MDPI journals
Dr. Elena Romanovskaia

E-Mail Website
Guest Editor
Research Associate, Materials Science and Engineering Department, University of Virginia, Charlottesville, VA 22904, USA
Interests: waste treatment; electrochemistry; physical chemistry; inorganic chemistry; wastewater treatment; recycling of water treatment and wastewater treatment wastes; nanosized and advanced materials synthesis; nanotechnology in catalysis; corrosion processes; materials science; corrosion

Special Issue Information

Dear Colleagues,

We would like to invite you to contribute a paper to a Special Issue we are co-editing on the topic of “Sustainable Materials and Waste Recovery”. The aim of this Special Issue is to provide best practices in waste valorization, including waste to materials, and material recovery as part of the circular economy. This Special Issue is inspired by the United Nations Sustainable Development Goal 12.

We welcome applied research including case studies that can be related to problems of interest to waste researchers, practitioners, and/or policymakers. Case studies must describe results that can be applied beyond the specific location. Manuscripts regarding modeling and software development are acceptable if combined with lab experimental results.

Prof. Dr. Valentin Romanovski
Prof. Dr. Xintai Su
Dr. Haitao Wang
Dr. Elena Romanovskaia
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Applied Sciences is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2400 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • industrial waste
  • water treatment waste
  • wastewater treatment waste
  • inorganic waste
  • recycling
  • materials recovery
  • waste to materials

Published Papers (3 papers)

Download All Papers
Order results
Result details
Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:

Research

19 pages, 2150 KiB  
Article
Adsorption of Ammonium, Nitrate, and Phosphate on Hydrochars and Biochars
by Paulo André Trazzi, Mayank Vashishtha, Jan Najser, Achim Schmalenberger, Vasanth Kumar Kannuchamy, James J. Leahy and Witold Kwapinski
Appl. Sci. 2024, 14(6), 2280; https://doi.org/10.3390/app14062280 - 8 Mar 2024
Viewed by 669
Abstract
Biochar (BC) and hydrochar (HC) have attracted considerable attention owing to their versatile characteristics and proven effectiveness in diverse technical fields. Solid BC is generated as a result of the dry carbonisation process of pyrolysis, in contrast to the slurry HC, which is [...] Read more.
Biochar (BC) and hydrochar (HC) have attracted considerable attention owing to their versatile characteristics and proven effectiveness in diverse technical fields. Solid BC is generated as a result of the dry carbonisation process of pyrolysis, in contrast to the slurry HC, which is produced during the hydrothermal carbonisation process. In this study, we evaluated the adsorption potential of two hydrochar samples (HCs) and three biochar samples (BCs) produced from sugar cane bagasse. The adsorption capacity of these samples was tested for ammonium, nitrate, and phosphate ions under various conditions. The BCs and HCs were subjected to characterisation using a CHNS/O analyser, the zeta potential, and Fourier transform infrared (FTIR). Elevating the pyrolysis temperature of the biochar resulted in changes in the fixed carbon and ash contents, while the volatile matter and H/C and O/C atomic ratios decreased. As the residence time increased, the H/C ratio and volatile matter content of the hydrochars (HCs) decreased. However, the fixed carbon content, ash content, and O/C and C/N ratios exhibited an increase. Thermodynamics, adsorption isotherms, and pH were also taken into consideration. The FTIR spectra analysis indicated that the carboxyl and ester functional groups present in both the BCs and HCs displayed reduced peak intensities subsequent to the adsorption of the three ions. While the adsorption was exothermic, we noticed that the adsorption capacity increased with temperature. The results indicate that sorption was homogenous across all binding sites, as evidenced by the optimal fit to the Langmuir isotherm. The research findings indicate that the adsorption capacity of various BC and HC adsorbents is significantly influenced by the surface area of the adsorbents in the case of nitrate and phosphate, but in the case of ammonia, adsorption is dictated by the functional polar groups present on the adsorbent surface. Full article
(This article belongs to the Special Issue Sustainable Materials and Waste Recovery)
►▼ Show Figures

Figure 1

20 pages, 5398 KiB  
Article
Solidification of Radioactive Wastes Using Recycled Cement Originating from Decommissioned Nuclear-Energy Facilities
by Ji-Hun Jeon, Jong-Hwan Lee, Woo-Chun Lee, Sang-Woo Lee and Soon-Oh Kim
Appl. Sci. 2024, 14(5), 1781; https://doi.org/10.3390/app14051781 - 22 Feb 2024
Viewed by 467
Abstract
Hundreds of thousands of tons of waste are generated from decommissioned nuclear- power facilities, and it has become a critical global issue to secure technology for reducing and recycling this waste. Concrete waste (CW) is estimated to comprise 60–80% of the total waste, [...] Read more.
Hundreds of thousands of tons of waste are generated from decommissioned nuclear- power facilities, and it has become a critical global issue to secure technology for reducing and recycling this waste. Concrete waste (CW) is estimated to comprise 60–80% of the total waste, and concrete-waste powder (CWP) includes enough inorganic substances used as effective materials for waste treatment. Accordingly, it can be used to produce recycled cement (RC). This study aimed to evaluate the performance of a solidification agent manufactured using recycled cement (SRC) for the safe packing of radioactive wastes, such as coarse aggregates of CW, waste soil, and metal wastes originating from decommissioned nuclear facilities. The experimental results indicated that the most relevant incineration temperature of CWP for RC was 700 °C. The optimum water-to-binder ratio was determined to be 0.4, and the most relevant substitution ratio of ground granulated blast furnace slag for CWP was determined to be 15%. In addition, calcium silicate hydrate is the most effective hydration product for improving the compressive strength of SRC. The maximum packing capacities of the SRC for coarse aggregates, waste soil, and metal waste, which were simulated as radioactive wastes, were determined to be 30, 5, and 7 wt%, respectively. The results of leaching tests using SRC containing radioactive wastes contaminated with Co, Cs, and Sr indicated that their leachability indices met the acceptance level for disposal. Consequently, the RC composed of CWP can be used as a solidifying agent to safely dispose of radioactive wastes, such as coarse aggregates, waste soil, and metal waste. Full article
(This article belongs to the Special Issue Sustainable Materials and Waste Recovery)
►▼ Show Figures

Figure 1

13 pages, 4387 KiB  
Article
Preparation of a Low-Cement-Content Silty Soil Stabilizer Using Industrial Solid Wastes
by Haijun Li, Wenqiang Ma, Kai Wang, Yujie Feng, Shengtao Zhang, Shengya Zhou and Hanming Zhang
Appl. Sci. 2024, 14(1), 317; https://doi.org/10.3390/app14010317 - 29 Dec 2023
Viewed by 664
Abstract
Silty soil performs poorly when used in roads. Cement is generally used as a stabilizer to treat silty soil and enable it to meet the requirements for roadbed filling. However, cement is an environmentally unfriendly material and can cost much. Meanwhile, solid wastes [...] Read more.
Silty soil performs poorly when used in roads. Cement is generally used as a stabilizer to treat silty soil and enable it to meet the requirements for roadbed filling. However, cement is an environmentally unfriendly material and can cost much. Meanwhile, solid wastes of ground granulated blast furnace slag (GBFS), fly ash (FA), and flue gas desulfurized (FGD) gypsum are produced in large quantities annually. Therefore, stabilizer A (cement:ground GBFS:fly ash:FGD gypsum = 30:44:15:11) and stabilizer B (cement:ground GBFS:fly ash:FGD gypsum = 40:38:13:9) were investigated in this study by reducing the cement content in the stabilizer and improving the utilization rate of solid wastes. The compressive strength development, California bearing ratio (CBR), temperature shrinkage, mineral composition, and micro-morphology of the stabilized silty soil were measured. The main findings are as follows: firstly, the addition of solid wastes can mitigate the adverse effect of delay time on compressive strength development. Secondly, the proposed stabilizers can significantly improve the CBR, which can reach 60% with a 4% dosage. Additionally, Stabilizer B is believed to improve the resistance to temperature shrinkage, and a higher stabilizer dosage can reduce the rate of decrease in water stability coefficient. Both X-ray diffraction analysis and scanning electron microscope observations show that the main hydration products that contribute to the stabilization are C-S-H and ettringite. Full article
(This article belongs to the Special Issue Sustainable Materials and Waste Recovery)
►▼ Show Figures

Figure 1

Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:
 
Displaying articles 1-3
Back to TopTop