Appl. Nano, Volume 4, Issue 3 (September 2023) – 5 articles

This paper evaluated the use of soft-probe scanning electrochemical microscopy complementarily with confocal laser scanning microscopy to study the effects of different antimicrobial agents and treatments on E. coli DH5α biofilm. The antimicrobial agents were sodium azide, silver nanoparticles, and a flashlight. The effects of these agents were monitored by measuring the change in biofilm properties, such as biofilm biomass, live/dead studies, and surface activity. The results showed that sodium azide, silver nanoparticles, and the flashlight effectively killed E. coli biofilms and explained the mode of action for each treatment. Sodium azide was more effective in killing the biofilm after a short treatment time by blocking the ATPase, while silver nanoparticles were more effective at killing the biofilm after longer treatment times through several antibiofilm actions. This work showed that scanning electrochemical microscopy (SECM) is a very valuable tool for studying the effects of antimicrobial agents on biofilms. SECM is a sensitive technique that can be used to monitor the changes in biofilm properties in real-time. Additionally, SECM does not require any sample preparation, which makes it a convenient and efficient technique. Overall, the results of this study could be used to develop new strategies for treating E. coli biofilm infections and provide valuable insights into the use of SECM to study the effects of antimicrobial agents on E. coli biofilms. Full article

The present work proposes the optimization of the co-digestion of vinasse, filter cake, and deacetylation liquor in a continuous reactor by adding iron(III) oxide (Fe₃O₄) nanoparticles (NPs), comparing the results with a previous reactor operation without NPs. Initially, tests were carried out in batches with different NP concentrations, resulting in 5 mg L⁻¹ as the best concentration to be added in the continuous reactor along the increments of the applied organic load rate (OLR). Methane (CH₄) production reached a maximum value of 2.8 ± 0.1 NLCH₄ gVS⁻¹ (normal liter methane per gram of volatile solids), and the organic matter removal reached 71 ± 0.9% in phase VI (OLR of 5.5 gVS L⁻¹ day⁻¹). This production was 90% higher than the reactor co-digestion operation without NPs. The anaerobic digestion (AD) development was stable with stable organic acid (OA) concentrations, indicating the predominance of the propionic acid route to produce CH₄. The main methanogenic Archaea identified was Methanoculleus, indicating that the predominant metabolic route was that of acetate (SAO) coupled with hydrogenotrophic methanogenesis. The use of Fe₃O₄ NPs managed to improve the AD from the first-generation and second-generation (1G2G) ethanol production residues and stimulated microbial community growth, without modifying the preferable metabolic pathways. Full article

Over recent years, the ‘green’ chemistry approach to synthesizing nanoparticles has made significant developments. Because of their unique features, nanoparticles have received a lot of attention. The use of a bioflocculant to promote the environmentally friendly synthesis of copper nanoparticles is described in this paper. Copper nanoparticles were biosynthesized using bioflocculant which was produced from a yeast, Pichia kudriavzevii. The chemical reduction approach was used to synthesize copper nanoparticles (CuNPs) using a bioflocculant as a capping agent. Characterization of the as-synthesized copper nanoparticles was conducted using Fourier transform infrared (FT-IR) spectroscopy, UV-visible spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy dispersive X-ray (EDX). The FT-IR spectra revealed characteristic peaks at 3267, 2956, 1656, 1059, and 511 cm⁻¹ for the bioflocculant, while for the bioflocculant passivated CuNPs, the characteristic peaks were at 3482 (-OH), 3261, 1640, 1059, 580, and 519 cm⁻¹ (Cu-O). These peaks revealed that functional groups such as hydroxyls, amines, and copper oxide bonds were present. The UV-Vis analysis showed surface plasmon resonance (SPR) at an absorbance range of 500–600 nm, with peak maxima at 555 and 575 nm for the as-synthesized CuNPs. The XRD pattern revealed planes such as (200) and (220) at 2θ = 43 and 52°, and the particle size (30 nm) was determined by the Debye–Scherrer equation. The transmission electron microscopy analysis revealed a spherical-shaped particle with an average size of 20 nm. The EDX analysis of the as-synthesized CuNPs revealed the presence of the element Cu, which was not present in the EDX image of the bioflocculant used in the synthesis of the CuNPs; this indicated the success of biosynthesis. Full article

In this work, α-Ag₂WO₄ particles with different cross-sections were obtained using the co-precipitation method at different synthesis temperatures. The samples were characterized by X-ray diffraction (XRD), field-scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The antimicrobial activity was analyzed using the Minimum Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC) methods against the Escherichia coli and Salmonella spp. gram-negative bacteria. The antimicrobial tests against Escherichia coli and Salmonella spp. indicated that concentrations of 2.5–5 mg/mL and 5 mg/mL completely inhibit its growth, respectively. The antimicrobial activity was analyzed employing band-edge positions for ROS generations and the superficial distribution of Ag⁺ species that contribute to antimicrobial activity. Quantum-chemical calculations were used at the DFT level to investigate the surface-dependent reactivity of α-Ag₂WO₄, and we demonstrated how the antimicrobial properties could be tailored by the geometry and electronic structure of the exposed surfaces, providing guidelines for the morphology design. Full article

Magnetite (Fe₃O₄) nanoparticles were extracted from the shells of freshwater Limnoperna fortunei (Dunker 1857) and marine Perna perna (Linnaeus 1758) mussels, followed by full physical and chemical characterization using ICP-OES, UV–Vis, EDX, Raman, and XRD spectroscopy, VSM magnetometry, and SEM and TEM techniques. Considering their spatial distribution, the ferrimagnetic particles in the shells had low concentration and presented superparamagnetic behavior characteristics of materials of nanometric size. Transmission electron microscopy (TEM, especially HRTEM) indicated round magnetic particles around 100 nm in size, which were found to be aggregates of nanoparticles about 5 nm in size. The TEM data indicated no iron oxide particles at the periostracum layer. Nevertheless, roughly round iron (hydr)oxide nanoparticle aggregates were found in the nacre, namely, the aragonite layer. As the aragonite layer is responsible for more than 97% of the shell of L. fortunei and considering the estimated size of the magnetic nanoparticles, we infer that these particles may be distributed homogeneously throughout the shell. Full article