Next Article in Journal
Investigation of the Ordered Structure in Partially Melted Isotactic Polypropylene
Next Article in Special Issue
Cryostructuring of Polymeric Systems: 62 Preparation and Characterization of Alginate/Chondroitin Sulfate Cryostructurates Loaded with Antimicrobial Substances
Previous Article in Journal
Partial Polymer Blend for Fused Filament Fabrication with High Thermal Stability
Previous Article in Special Issue
Microstructure and Mechanical/Hydrophilic Features of Agar-Based Films Incorporated with Konjac Glucomannan
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Qiao et al. Microstructure and Mechanical/Hydrophilic Features of Agar-Based Films Incorporated with Konjac Glucomannan. Polymers 2019, 11, 1952

1
Glyn O. Phillips Hydrocolloid Research Centre at HBUT, School of Food and Biological Engineering, Hubei University of Technology, Wuhan 430068, Hubei, China
2
Department of Chemical Engineering, Guangxi Key Laboratory Cultivation Base for Polysaccharide Materials and Modifications, Guangxi University for Nationalities, Nanning 530008, Guangxi, China
3
Group for Cereals and Oils Processing, College of Food Science and Technology, Key Laboratory of Environment Correlative Dietology (Ministry of Education), Huazhong Agricultural University, Wuhan 430070, Hubei, China
4
Faculty of Engineering, University of Nottingham, Nottingham NG7 2RD, UK
*
Authors to whom correspondence should be addressed.
Polymers 2021, 13(19), 3352; https://doi.org/10.3390/polym13193352
Submission received: 25 June 2021 / Accepted: 16 September 2021 / Published: 30 September 2021
(This article belongs to the Collection Biopolymers and Biobased Polymers: Chemistry and Engineering)
The authors wish to make the following correction to this paper [1]: in the original version of the published article, there is a mistake in Equation (1) on Page 3. It should be: σt = F/(T × W).
The authors apologize for any inconvenience caused to the readers by these changes. These changes have no material impact on the conclusions of our paper. The original article has been updated.

Conflicts of Interest

The authors declare no conflict of interest.

Reference

  1. Qiao, D.; Tu, W.; Zhong, L.; Wang, Z.; Zhang, B.; Jiang, F. Microstructure and mechanical/hydrophilic features of agar-based films incorporated with konjac glucomannan. Polymers 2019, 11, 1952. [Google Scholar] [CrossRef] [PubMed] [Green Version]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Qiao, D.; Tu, W.; Zhong, L.; Wang, Z.; Zhang, B.; Jiang, F. Correction: Qiao et al. Microstructure and Mechanical/Hydrophilic Features of Agar-Based Films Incorporated with Konjac Glucomannan. Polymers 2019, 11, 1952. Polymers 2021, 13, 3352. https://doi.org/10.3390/polym13193352

AMA Style

Qiao D, Tu W, Zhong L, Wang Z, Zhang B, Jiang F. Correction: Qiao et al. Microstructure and Mechanical/Hydrophilic Features of Agar-Based Films Incorporated with Konjac Glucomannan. Polymers 2019, 11, 1952. Polymers. 2021; 13(19):3352. https://doi.org/10.3390/polym13193352

Chicago/Turabian Style

Qiao, Dongling, Wenyao Tu, Lei Zhong, Zhong Wang, Binjia Zhang, and Fatang Jiang. 2021. "Correction: Qiao et al. Microstructure and Mechanical/Hydrophilic Features of Agar-Based Films Incorporated with Konjac Glucomannan. Polymers 2019, 11, 1952" Polymers 13, no. 19: 3352. https://doi.org/10.3390/polym13193352

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop