Next Article in Journal
Assessment of Eggplant (Solanum melongena L.) Genotypes and Selection of Parameters for Better Yield
Previous Article in Journal
Characterization of a Triticum aestivum L. Experimental Field to Implement an Agronomic Biofortification Workflow
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Abstract

Synthesis and Characterization of Medium Molecular Weight Chitosan-Stabilized Selenium Nanoparticles †

by
Valentina Gabriela Bîrsan
1,2,
Luminița Dimitriu
1,3,
Raluca Șomoghi
1,
Daniela Berger
2,
Diana Constantinescu Aruxandei
1,* and
Florin Oancea
1,3,*
1
The National Institute for Research & Development in Chemistry and Petrochemistry—ICECHIM, Splaiul Independenței nr. 202, 060021 Bucharest, Romania
2
Faculty of Applied Chemistry and Material Science, University “Politehnica” of Bucharest, 1-7 Polizu Street, 011061 Bucharest, Romania
3
Faculty of Biotechnologies, University of Agronomic Sciences and Veterinary Medicine of Bucharest, Mărăști Blvd., nr. 59, 011464 Bucharest, Romania
*
Authors to whom correspondence should be addressed.
Presented at the15th International Symposium “Priorities of Chemistry for a Sustainable Development” PRIOCHEM, Bucharest, Romania, 27–29 October 2021.
Chem. Proc. 2022, 7(1), 85; https://doi.org/10.3390/chemproc2022007085
Published: 30 June 2022
Due to its involvement in physiological, metabolic and pharmacological actions, selenium is considered an essential micronutrient in human nutrition. Red selenium nanoparticles (Se NPs) have been shown to have excellent bioavailability, antioxidant activity and low toxicity making them an alternative to inorganic and organic forms of selenium [1]. In agriculture Se NPs gained attention as antimicrobial agents, growth promoters, crop biofortification, and nutraceuticals [2]. Chitosan (CS) is the only positively charged natural polysaccharide and is extracted from the exoskeleton of arthropods, insects and fungi. Massivley studied and used as a carrier for various drugs because of its low toxicity, CS was tested for SeNPs encapsulation and stabilizer [3]. The main aim of this study was to obtain and characterize SeNPs capped by chitosan with medium molecular weight (CS-SeNPs). SeNPs were obtained by chemical reduction of sodium selenite with ascorbic acid added dropwise. Chitosan was used as stabilizer agent for Se NPs. A solution of 1% medium molecular weight chitosan (in 4% acetic acid) was added dropwise to the system and stirred for 30 min at 1000 rpm to prevent the aggregation of the synthesized particles. CS-Se NPs were characterized with SEM, TEM-EDX, DLS, and XRD. The antioxidant activity of the nanoparticles was determined by DPPH method. The formation of SeNPs was confirmed by the color of the mixture turning deep red. The HR-TEM and SEM images reveal the homogeneity of the sample and the distribution of the uniform spherical Se NPs. The average particle size of CS-SeNPs was 100 and 270 nm, as determined by TEM, UV-VIS and DLS, respectively. The XRD analysis showed the amorphous CS-SeNPs formation. EDX confirmed Se as the major element in CS-SeNPs. The antioxidant activity of CS-SeNPs was found to be 13.35 µM equivalent Trolox/ml. Our study obtained medium molecular weight chitosan-stabilized selenium nanoparticles with high antioxidant activity and high stability, which could be used for agricultural applications.

Funding

This research was funded by the Romanian Ministry of Agriculture and Rural Development, project ADER 7.3.9, Research on the biological activity of some nanomaterial-based products on major pest and pathogens of fruit trees and assessment of the ecotoxicological impact of these on useful entomofauna.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Not applicable.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Chen, W.; Li, Y.; Yang, S.; Yue, L.; Jiang, Q.; Xia, W. Synthesis and antioxidant properties of chitosan and carboxymethyl chitosan-stabilized selenium nanoparticles. Carbohydr. Polym. 2015, 132, 574–581. [Google Scholar] [CrossRef] [PubMed]
  2. Garza-García, J.J.O.; Hernández-Díaz, J.A.; Zamudio-Ojeda, A.; León-Morales, J.M.; Guerrero-Guzmán, A.; Sánchez-Chiprés, D.R.; López-Velázquez, J.C.; García-Morales, S. The role of selenium nanoparticles in agriculture and food technology. Biol. Trace Elem. Res. 2021, 200, 2528–2548. [Google Scholar] [CrossRef] [PubMed]
  3. Zhang, C.; Zhai, X.; Zhao, G.; Ren, F.; Leng, X. Synthesis, characterization, and controlled release of selenium nanoparticles stabilized by chitosan of different molecular weights. Carbohydr. Polym. 2015, 134, 158–166. [Google Scholar] [CrossRef] [PubMed]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Bîrsan, V.G.; Dimitriu, L.; Șomoghi, R.; Berger, D.; Aruxandei, D.C.; Oancea, F. Synthesis and Characterization of Medium Molecular Weight Chitosan-Stabilized Selenium Nanoparticles. Chem. Proc. 2022, 7, 85. https://doi.org/10.3390/chemproc2022007085

AMA Style

Bîrsan VG, Dimitriu L, Șomoghi R, Berger D, Aruxandei DC, Oancea F. Synthesis and Characterization of Medium Molecular Weight Chitosan-Stabilized Selenium Nanoparticles. Chemistry Proceedings. 2022; 7(1):85. https://doi.org/10.3390/chemproc2022007085

Chicago/Turabian Style

Bîrsan, Valentina Gabriela, Luminița Dimitriu, Raluca Șomoghi, Daniela Berger, Diana Constantinescu Aruxandei, and Florin Oancea. 2022. "Synthesis and Characterization of Medium Molecular Weight Chitosan-Stabilized Selenium Nanoparticles" Chemistry Proceedings 7, no. 1: 85. https://doi.org/10.3390/chemproc2022007085

Article Metrics

Back to TopTop