Next Article in Journal
Characterization of Nitrogen-Doped TiO2 Films Prepared by Arc Ion Plating without Substrate Heating in Various N2/O2 Gas Mixture Ratios
Previous Article in Journal
Cleaning Effect of Atmospheric-Plasma-Sprayed Y2O3 Coating Using Piranha Solution Based on Contamination Particle Measurement
 
 
Article
Peer-Review Record

Effects of Surface Modification and Heat Treatment on the Storage and Application Properties of Waterborne Zinc-Based Paint

Coatings 2023, 13(3), 652; https://doi.org/10.3390/coatings13030652
by Liran Liu 1,2,†, Yangtao Zhou 2,†, Qingpeng Li 1,3,*, Yuejun Yin 4, Wei Zhang 3 and Na Wang 1,3,*
Reviewer 1: Anonymous
Coatings 2023, 13(3), 652; https://doi.org/10.3390/coatings13030652
Submission received: 15 February 2023 / Revised: 8 March 2023 / Accepted: 18 March 2023 / Published: 20 March 2023

Round 1

Reviewer 1 Report

The manuscript is well done and is suitable for publishing in Coatings after minor revisions according to the text presented below:

1. Page 3, line 91 - The authors need to present the composition of the low-carbon steel used.

2. Page 3, lines 111-115 - In my opinion this information could be avoided since it describes the requirements of the standard ASTM B 117-09.

3. How is the isolation of the samples treated in the salt spray chamber realized?

4. Page 3, line 126 - What is the reason to use such a speed; in the most cases the speed is 1 mV/sec.

5. Page 4, line 128 - The time period needed for stabilizing the open-circuit potential in that medium should be greater than 180 sec. What is the reason?

6. Figure 3 - Please, mark the shell on the image.

Author Response

Please see the attachment.

Author Response File: Author Response.docx

Reviewer 2 Report


Comments for author File: Comments.pdf

Author Response

Please see the attachment.

Author Response File: Author Response.docx

Back to TopTop