Next Article in Journal
Development of a TiNbTaMoZr-Based High Entropy Alloy with Low Young´s Modulus by Mechanical Alloying Route
Next Article in Special Issue
Interface Quality Indices of Al–10Si–Mg Aluminum Alloy and Cr18–Ni10–Ti Stainless-Steel Bimetal Fabricated via Selective Laser Melting
Previous Article in Journal
Influence of Forming Parameters on the Mechanical Behavior of a Thin Aluminum Sheet Processed through Single Point Incremental Forming
Previous Article in Special Issue
A Constitutive Model for Yield Strength and Work Hardening Behaviour of Aluminium Alloys during Artificial Ageing
 
 
Article

Article Versions Notes

Metals 2020, 10(11), 1462; https://doi.org/10.3390/met10111462
Action Date Notes Link
article pdf uploaded. 31 October 2020 12:19 CET Version of Record https://www.mdpi.com/2075-4701/10/11/1462/pdf-vor
article xml file uploaded 3 November 2020 13:23 CET Original file -
article xml uploaded. 3 November 2020 13:23 CET Update https://www.mdpi.com/2075-4701/10/11/1462/xml
article pdf uploaded. 3 November 2020 13:23 CET Updated version of record https://www.mdpi.com/2075-4701/10/11/1462/pdf
article html file updated 3 November 2020 13:24 CET Original file -
article html file updated 22 July 2022 23:25 CEST Update https://www.mdpi.com/2075-4701/10/11/1462/html
Back to TopTop