Next Article in Journal
Discovery of RC-752, a Novel Sigma-1 Receptor Antagonist with Antinociceptive Activity: A Promising Tool for Fighting Neuropathic Pain
Next Article in Special Issue
Indol-3-ylglyoxylamide as Privileged Scaffold in Medicinal Chemistry
Previous Article in Journal
Scaling the Andean Shilajit: A Novel Neuroprotective Agent for Alzheimer’s Disease
Previous Article in Special Issue
Rapid and Efficient Access to Novel Bio-Inspired 3-Dimensional Tricyclic SpiroLactams as Privileged Structures via Meyers’ Lactamization
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Pharmaceuticals
Volume 16
Issue 7
10.3390/ph16070961
pharmaceuticals-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Antibacterial Properties of Mesoporous Silica Nanoparticles Modified with Fluoroquinolones and Copper or Silver Species

by
Maider Ugalde-Arbizu
1,2,3,
John Jairo Aguilera-Correa
2,4,*,
Eider San Sebastian
1,
Paulina L. Páez
5,*,
Estela Nogales
3,
Jaime Esteban
2,4 and
Santiago Gómez-Ruiz
3,*
1
Departamento de Química Aplicada, Facultad de Química, Euskal Herriko Unibertsitatea (UPV/EHU), Paseo Manuel Lardizabal 3, 20018 San Sebastián, Spain
2
Clinical Microbiology Department, IIS-Fundación Jiménez Diaz, UAM, Avenida Reyes Católicos 2, 28040 Madrid, Spain
3
COMET-NANO Group, Departamento de Biología y Geología, Física y Química Inorgánica, ESCET, Universidad Rey Juan Carlos, C/Tulipán s/n, 28933 Móstoles, Spain
4
CIBERINFEC-CIBER de Enfermedades Infecciosas, Instituto de Salud Carlos III, 28222 Madrid, Spain
5
Departamento de Ciencias Farmacéuticas, Facultad de Ciencias Químicas, Universidad Nacional de Córdoba, Unidad de Investigación y Desarrollo en Tecnología Farmacéutica (UNITEFA), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Haya de la Torre y Medina Allende, Ciudad Universitaria, Córdoba X5000HUA, Argentina
*
Authors to whom correspondence should be addressed.
Pharmaceuticals 2023, 16(7), 961; https://doi.org/10.3390/ph16070961
Submission received: 27 May 2023 / Revised: 26 June 2023 / Accepted: 28 June 2023 / Published: 5 July 2023
(This article belongs to the Special Issue Privileged Structures as Leads in Medicinal Chemistry 2023)
Browse Figures
Versions Notes

Abstract

:
Antibiotic resistance is a global problem and bacterial biofilms contribute to its development. In this context, this study aimed to perform the synthesis and characterization of seven materials based on silica mesoporous nanoparticles functionalized with three types of fluoroquinolones, along with Cu2+ or Ag+ species to evaluate the antibacterial properties against Staphylococcus aureus, Enterococcus faecalis, Escherichia coli, and Pseudomonas aeruginosa, including clinical and multi-drug-resistant strains of S. aureus and P. aeruginosa. In addition, in order to obtain an effective material to promote wound healing, a well-known proliferative agent, phenytoin sodium, was adsorbed onto one of the silver-functionalized materials. Furthermore, biofilm studies and the generation of reactive oxygen species (ROS) were also carried out to determine the antibacterial potential of the synthesized materials. In this sense, the Cu2+ materials showed antibacterial activity against S. aureus and E. coli, potentially due to increased ROS generation (up to 3 times), whereas the Ag+ materials exhibited a broader spectrum of activity, even inhibiting clinical strains of MRSA and P. aeruginosa. In particular, the Ag+ material with phenytoin sodium showed the ability to reduce biofilm development by up to 55% and inhibit bacterial growth in a “wound-like medium” by up to 89.33%.

Graphical Abstract

1. Introduction

At the beginning of the 21st century, the increasing emergence of multi-resistant bacterial pathogens has become a global problem. The World Health Organization (WHO) has already underlined the urgency of designing new antimicrobial molecules because conventional antibiotics are becoming less and less useful as therapeutic agents [1,2]. Antibiotic resistance is closely related to the development of bacterial biofilms because the bacterial cells surrounded by their self-produced biomatrix living inside the biofilm require a higher concentration of antimicrobials than those needed to kill their planktonic counterparts, which can be up to 1000 times higher, making it challenging to develop effective treatments to eradicate bacterial infections [3,4].
In this context, nanomedicine has introduced promising changes in clinical practice that have allowed researchers to address unmet medical needs. In particular, nanoparticles can act as carriers of antibiotics, increasing their ability to penetrate the biofilm bacteria often developed to resist conventional antibiotics [5,6]. Among nanomaterials, silica nanoparticles (MSNs) represent one of the most studied materials in nanomedicine due to their good biocompatibility, good degree of porosity, large surface area, a substantial pore volume, and an interesting ease of surface modification, which allow them to support organic and inorganic compounds as therapeutic agents against bacterial infections [7,8,9,10]. Therefore, in this work, functionalized and fully characterized MSNs were used as therapeutic agents for the prevention of the development of bacterial infections.
In addition, and in the context of the discovery of alternative antibacterial agents, fluoroquinolones (FQ) have been demonstrated to be a broad family of antibiotics that can be widely used against various bacteria, such as Escherichia coli or Pseudomonas aeruginosa, and have been used since the approval of ciprofloxacin by the Food and Drug Administration (FDA) in 1987 [11,12,13]. However, as the use of FQs has increased, resistance has also emerged as a current problem [14]. Nevertheless, it has been shown that after the incorporation of FQs into MSNs, bacterial susceptibility may increase [15,16].
The use of metals in this biological field is another alternative to the challenge of antibiotic resistance. Metals are impervious to selective resistance [17,18]. In this regard, the literature contains examples of utilizing a formation of coordination compounds with FQ, which has led to the development of improved antibacterial agents [19,20,21,22,23,24,25,26]. Among all metals, Cu2+ and Ag+ metals constitute excellent alternatives [27,28] owing to their excellent antibacterial activity [29,30,31,32,33].
Thus, to understand the importance of finding adequate therapeutic agents, it is important to note that the occurrence of chronic non-healing infected wounds in developed countries is similar to more visible health problems, such as heart failure (1–2%); therefore, the development of new anti-infectious and epithelial tissue-proliferative treatments is a top medical priority [34].
In this context, the purpose of this work is to develop new antimicrobial molecules and effective treatments against bacterial infections by functionalizing MSN materials with three perhalogenated fluoroquinolone (FQ) derivatives (namely, 3F-FQ, 2F-FQ, and FCl-FQ) based on 1-cyclopropyl-6-fluoro-4-oxo-1,4-dihydroquinolone-3-carboxylic acid (in blue in Scheme 1). Each derivative was synthesized and characterized. Fluoroquinolones have been used in this study because of their high antibacterial potential. In a subsequent step, each material was further functionalized with Cu2+ or Ag+ species to promote a synergistic antibacterial effect between the metals and fluoroquinolones. Furthermore, our study also involved the adsorption of phenytoin sodium, a well-known proliferative agent [35,36,37], onto one of the silver-functionalized materials, aiming at promoting healing of infected wounds. This proliferative agent demonstrated an additive antibacterial effect when co-administered with silver-containing species, while the phenytoin-loaded silver materials caused an almost complete eradication of P. aeruginosa infections in wound-like medium (including components that the synthesized materials would encounter in an in vivo model) and biofilms [38].
In a step toward the development of effective treatments against bacterial infections, in this study, the synthesized materials were tested as broad-spectrum anti-infectious agents against planktonic cultures of commercial strains of Enterococcus faecalis, Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa, as well as clinical and multidrug-resistant strains of the latter two. The study also included biofilm studies in both commercial and clinical strains and the determination of reactive oxygen species (ROS) with very promising results that validate future studies with these types of materials in preclinical applications.

2. Results

2.1. Synthesis and Physicochemical Characterization of Functionalized NPs

MSN were functionalized with 3-aminopropyltriethoxysilane to give MSN–AP (Scheme 1). Subsequently, these amino-functionalized materials were treated for two hours at room temperature with a 10% solution of the corresponding FQ derivative ligand using an EDAC/NHS coupling reaction to afford 1, 2, and 3 (Scheme 1). The incorporation of copper and silver was achieved by the reaction of the material with Cu(NO3)2·2.5H2O or AgNO3 under reflux for 24 h, respectively, to obtain 1-Cu, 2-Cu, 3-Cu, and 1-Ag, 2-Ag, and 3-Ag materials (Scheme 1). Finally, the 1-Ag material was loaded with phenytoin sodium (PTN) in water at a low temperature to achieve the final material, 1-Ag@PTN (Scheme 1).
Pharmaceuticals 16 00961 sch001 550
Scheme 1. Synthetic routes in the preparation of the functionalized materials.
Scheme 1. Synthetic routes in the preparation of the functionalized materials.
Pharmaceuticals 16 00961 sch001

2.1.1. Analysis of Size, Morphology, and Textural Properties

The synthesized materials were characterized by transmission electronic microscopy (TEM). The micrographs were analyzed using ImageJ® (version 1.53) software to determine the morphology and particle size. As can be seen in Figure 1, in all cases, the nanoparticles show an oval structure with hexagonally arranged porous parallel channels. The particle size in all the cases was in the range of 131–143 nm (for particle size distributions, see Figure S1 in Supporting Information). Compounds 1-Ag, 2-Ag, and 3-Ag showed spherical nanoparticles adhered to MSNs with an average size of 9–12 nm, compatible with Ag nanoparticles.
The starting (MSN) and final materials were characterized by nitrogen adsorption/desorption isotherms (BET) in order to determine the most interesting textural features (Table 1), which allowed us to determine whether the materials were loaded with the different agents (Figures S2 and S3 in the Supporting Information provide further details).
In the case of the bare MSN nanoparticles, and according to the IUPAC classification, the obtained isotherm can be classified as type IV [39], typical of mesoporous materials [40,41,42,43]. In addition, a hysteresis loop formed between P/P0 0.90–1.0, confirming the capillary condensation processes of the mesoporous materials. The adsorption study showed that the unmodified BET (SBET) surface area was 925 m2 g−1, while after the functionalization reactions, a very significant decrease in the N2 adsorption capacity of the final materials was observed. The functionalized systems (namely, 1-Ag, 1-Ag@PTN, 2-Cu, 2-Ag, 3-Cu, and 3-Ag) showed isotherms between type II and type III and the SBET parameters much lower than those of MSN (Table 1 and Figure S2), which is indicative of the functionalization occurring inside the pore, inducing a decrease in the pore volume and diameter. Furthermore, PTN adsorption caused 1a-Ag@PTN to also show a moderate decrease in its N2 adsorption capacity (Figure S2, pink lines) compared to the same material without PTN (1a-Ag, Figure S2, green lines), reflected in the SBET parameter, which decreased by 35.7% compared to the same material without PTN.

2.1.2. Quantification of the Functionalization Degree by Thermogravimetry and Inductively Coupled Plasma Atomic Emission Spectroscopy

The determination of the functionalization degree of the nanoparticles, estimated from the quantification of the AP, FQ, metal, and PTN content, was performed by thermogravimetry analysis (TGA) and inductively coupled plasma atomic emission spectroscopy (ICP-AES) (Table 2). The amount of mmol of PA, FQ, and PTN per gram of material was determined by TGA, which quantified the mass loss in the temperature range between 120 and 650 °C (Figure S4). The data indicate a functionalization of about 0.70 mmol of AP per gram of MSN and between 0.28–0.36 mmol of FQ per gram of material. In addition, the metal-functionalized materials were characterized by ICP-AES to determine the quantity (mmol per g of material) of supported Cu or Ag. The results show that the quantity of Cu was between 0.1–0.2 mmol per gram of material and the amount of silver was between 0.1–0.3 mmol per gram of material (Table 2). Finally, the quantification of phenytoin sodium adsorbed on the 1-Ag@PTN material was determined by TG, revealing a PTN load of 1.16 mmol per gram of material.

2.1.3. Characterization by Powder X-ray Diffraction Studies

The starting material, MSN, and the corresponding functionalized materials were characterized by powder X-ray diffraction (PXRD) (Figure 2 and Figure S5, Table S1). The unmodified MSN materials exhibited three peaks at 2θ of 2.57°, 4.32°, and 4.98°, corresponding to (100), (110), and (200) Miller planes, respectively, which confirmed the mesoscopic order of the material. As can be seen in Figure 2, after the functionalization reactions, the intensity of these peaks (especially of those of planes 110 and 200) decreased due to the partial blocking of the scattering points of the porous system caused by the incorporation of the organic and/or metallic fragments in the system. The diffractograms obtained for the homologous materials based on 2 and 3 had similar patterns (Figure S5).
Furthermore, the presence of AgCl nanoparticles in the silver-containing materials and the correct encapsulation of PTN in the pores of 1-Ag@PTN were confirmed by large-angle diffractograms (Figures S5 and S6 in the Supporting Information).
The successful functionalization of the materials was further confirmed by Fourier-transformed infrared spectroscopy (FT-IR), diffuse reflectance UV–visible spectroscopy (DR-UV), and solid-state 13C CP MAS NMR spectroscopy studies (for details, see the Supporting Information, Figures S7–S9).

2.2. In Vitro Studies of Antibacterial Activity

2.2.1. Minimum Inhibitory Concentration (MIC) and Minimal Bactericidal Concentration (MBC)

The antibacterial effects of the materials were evaluated by comparing the MIC and MBC values against two Gram-positive (S. aureus ATCC 29213 and E. faecalis ATCC 29212) and two Gram-negative (E. coli ATCC 25922 and P. aeruginosa ATCC 27853) collection strains.
The results collected in Table 3 indicate that the silver-functionalized materials exhibit a broader spectrum of activity compared to the copper-functionalized ones. The former was effective against all four strains, while the latter only demonstrated activity against S. aureus and, specifically, against E. coli. The observed difference between the antibacterial activity of copper- and silver-functionalized materials could be attributed to the accessibility of the antibacterial agent to its target. Silver nanoparticles are attached to the surface of MSNs and are more accessible compared to copper compounds. This difference in accessibility could contribute to the enhanced antibacterial activity of silver-functionalized materials compared to copper-functionalized systems. Thus, the activity of materials 1-Cu, 2-Cu, and 3-Cu against S. aureus and E. coli was classified as bactericidal (MBC/MIC < 2). The bactericidal activity shown by these systems against E. coli is particularly remarkable, with MIC values of 15.62 µg/mL, lower than that observed in similar systems published previously by our group (31.25–125 µg/mL) [44,45]. Moreover, the MIC values became even more significant in reference to the concentration of copper in the final culture. In that case, the MIC values were between 0.12–0.20 µg/mL, which are somewhat similar or slightly lower than the clinically used drugs [46].
On the other hand, 1-Ag, 2-Ag, and 3-Ag showed activity against all four strains studied, indicative of a broader spectrum of antibacterial activity as compared to the copper analogues. While the three materials showed bactericidal activity against E. coli, 2-Ag also showed strong bactericidal activity against P. aeruginosa (MIC 125 μg/mL), and 1-Ag demonstrated a high sensitivity against P. aeruginosa (MIC 125 μg/mL and MBC 1000 μg/mL). Nevertheless, in general, in relation to the amount of metal (Ag), the materials showed better results than similar silver systems reported in the literature (MIC 5 µg/mL in reference to the amount of Ag) [47,48,49]. Nonetheless, the materials containing silver demonstrated only moderate efficacy against Gram-positive strains. The most effective MIC values were observed for the 2-Ag material against S. aureus, (125 μg/mL), whereas most of the other materials had MIC values of 500 μg/mL or 1000 μg/mL. The difference in activities between Gram-positive and Gram-negative bacteria could be attributed to the fact that Gram-negative bacteria possess a thinner cell wall, which might make them more susceptible to metal ion penetration; this seems to be one of the key factors of the antibacterial mechanism of this type of material.
In addition, the antibacterial and/or bactericidal efficacy of the same materials against Gram-positive and Gram-negative clinical strains was determined (Table 4). Thus, two clinical strains of methicillin-resistant S. aureus (MRSA1 and MRSA2) were incubated with silver and copper materials. Subsequently, the silver materials were also incubated with two clinical strains of P. aeruginosa (PA8 and PA13). The MIC and MBC values of 1-Cu, 2-Cu, and 3-Cu, and 1-Ag, 2-Ag, and 3-Ag were determined in each case and the results are shown in Table 4.
As derived from Table 4, and with respect to the effectiveness against clinical multi-resistant S. aureus strains, the copper materials were shown to be inactive, while the silver analogues were shown to sensitize both clinical S. aureus strains (with the exception of 1-Ag against MRSA2). In line with the observed better systematic performance of the silver-functionalized systems, these also showed high activity against clinical strains of P. aeruginosa. In particular, 1-Ag, with MIC values of 62.5 μg/mL and 31.25 μg/mL, was categorized as a bacteriostatic agent against PA8 and PA13, respectively. On the other hand, 2-Ag and 3-Ag, with MIC values in both cases of 62.5 μg/mL and 31.25 μg/mL against PA8 and PA13, respectively, were categorized as bactericidal and bacteriostatic agents against these two clinical strains, respectively.
Therefore, silver materials were shown to inhibit the growth of S. aureus and P. aeruginosa, which are predominant in chronic wounds and burns [50,51]. The effect of phenytoin sodium encapsulation in the 1-Ag material (yielding 1-Ag@PTN) on wound tissue regeneration was also analyzed, since previous studies showed that silver and phenytoin sodium activities against P. aeruginosa [38] are additive. The MIC and MBC values of 1-Ag@PTN against the three strains of P. aeruginosa were estimated and are listed in Table 5.
As can be seen in Table 5, after PTN encapsulation in the material, the MIC and MBC values decreased considerably due to the additive effect between PTN and silver when at least 2 dilutions of the material used is considered. These results were even better than those previously reported by our group for a similar system [38]. Importantly, the release of PTN in physiological medium was studied on the 1-Ag@PTN material (see Figure S10). It was observed that after 2 h of testing in physiological medium, more than 40% of the loaded PTN had already been released into the physiological medium.

2.2.2. Minimal Biofilm Inhibitory Concentration (MBIC) and Minimal Biofilm Eradication Concentration (MBEC)

The antibiofilm effect of the silver materials was evaluated by studying the MBICs and MBECs values upon incubation of three different biofilm P. aeruginosa strains (ATCC 27853 and the clinical patient-derived PA8 and PA13 strains).
As can be seen in Table 6, silver materials 1-Ag, 2-Ag, and 3-Ag inhibited P. aeruginosa biofilm growth, with the MBIC values against commercial (ATCC 27853) and clinical (PA8 and PA13) strains in the range of 250–500 μg/mL. Importantly, the silver materials were also able to exert biofilm eradication for strain PA8 at doses of 1000 μg/mL. On the other hand, and contrary to the observations in a planktonic state, an additive effect between PTN and silver was not evident in the biofilm state when comparing 1-Ag and 1-Ag@PTN. Thus, in most cases, the additive effect was only observed when comparing the metal content.

2.2.3. Effect on Biofilm Development

The ability of 1-Ag and 1-Ag@PTN materials to inhibit the stages of the biofilm development of P. aeruginosa strains was analyzed using MSN material as a control (Figure 3). Following the standards [52,53,54], the study was performed using 62.5 μg/mL of each material (4 × MIC 1-Ag@PTN).
As can be derived from Figure 3, the starting material (MSN) did not inhibit biofilm development of either collection (Figure 3a) or the clinical strains (Figure 3b,c), which was expected due to its excellent biocompatibility and the absence of any cytotoxic agent, whereas the functionalized materials did. The inhibition of ATCC 27853 strain biofilm development boosted from 16.89% with the 1-Ag material to 91.71% with the 1-Ag@PTN (Figure 3a). In the case of the clinical strains, both the percentages of biofilm growth inhibition and the differential performance of both types of materials were more moderate, with inhibitions of 56.02% in strain PA8 and 47.26% in strain PA13 with the 1-Ag material, and 59.97% and 55.48% in strains PA8 and PA13, respectively, with the 1-Ag@PTN material. Therefore, it can be concluded that the observed inhibitions on P. aeruginosa biofilm development is a consequence of the incorporation of silver and the differences between the two materials (most significantly on the ATCC 27853 and PA13 strains) may be due to the additive effect of silver coadministration with PTN.

2.2.4. Inhibition in Wound-like Medium

After the study in conventional culture media, an inhibition study was performed with the 1-Ag@PTN material in a wound-like medium against P. aeruginosa ATCC 27853. The composition of this medium included components against which the synthesized materials would have to show their efficacy in an in vivo model. For this purpose, two concentrations of the 1-Ag@PTN material were chosen, 62.5 μg/mL (4 × MIC) and 1 mg/mL (4 × MBC). As shown in Figure 4, the inhibition of bacterial growth was dose-dependent, showing no effect at a concentration of 62.5 μg/mL (4 × MIC) (Figure 4a), but a dramatic inhibition of 89.33% at a concentration of 1 mg/mL (Figure 4b). These results point out that the topical use of 1-Ag@PTN at 1 mg/mL may inhibit locally pseudomonal biofilm development in wounds and burns.

2.2.5. Bactericidal Mechanism of 1-Ag@PTN

The bactericidal mechanism of 1-Ag@PTN was analyzed using TEM images of a P. aeruginosa ATCC 27853 strain culture, acquired both in the absence (control) and in the presence of 500 μg/mL (2 × MBC) of 1-Ag@PTN (Figure 5).
As can be seen in Figure 5 (top), the control images show intact bacilli with dimensions of approximately 1.5–2 μm in length and 0.3–0.5 μm in width, whereas the TEM images acquired after incubation of the bacteria with 1-Ag@PTN (Figure 5 bottom) showed bacteria with clear structural and morphological changes, as only elements compatible with membranous vesicles were found. Furthermore, in addition to silica nanoparticles, smaller nanoparticles that could be compatible with AgCl NPs were also observed. Silver nanoparticles have several mechanisms of action that can result in bacterial death, including interactions with the outer membrane of bacteria, interactions with intracellular components, and alterations to the respiratory chain in the cytoplasmic membrane [55,56,57]. These mechanisms could be responsible for the bactericidal effect observed in 1-Ag@PTN against the P. aeruginosa ATCC 27853 strain.

2.2.6. Oxidative Stress Studies and Advanced Oxidation Protein Products (AOPP)

Oxidative stress is one of the main mechanisms of bacterial toxicity of copper and silver compounds [55,58,59,60], which leads to the oxidation of essential macromolecules (particularly proteins) and induces bacterial cell death. To evaluate whether oxidative stress may be one of the potential mechanisms of the antibacterial action of 1-Cu, 2-Cu, and 3-Cu ROS, advanced oxidation protein products (AOPP) were quantified upon incubation of S. aureus and E. coli with the synthesized materials at different time intervals and concentrations (MIC, MIC/10, and MIC × 10).
As shown in Figure 6 (left), the increase in ROS production by E. coli was not significant after short incubation times (1 h) and it was moderately significant (30–45%) in the case of S. aureus only with large concentrations of materials (MIC × 10). On the contrary, longer incubations times (4 h) at low concentrations (MIC/10) of either 1-Cu, 2-Cu, or 3-Cu were enough to dramatically increase the concentration of ROS in both strains. In fact, MIC/10 was found, upon 4 h of incubation as a general rule, to be the minimum concentration to achieve maximum ROS production, which reached values as large as 279 ± 29% in S. aureus for 3-Cu and 209 ± 21% in E. coli for 2-Cu (see Table 7).
The generation of advanced oxidation protein products (AOPP) was observed to increase with compound concentration and decrease with time (Figure 6, right). In this sense, incubation with the MIC of 1-Cu, 2-Cu, or 3-Cu was necessary to promote a significant AOPP increase in both strains, with S. aureus being more sensitive to treatment. On the other hand, the generation of oxidized proteins was inversely proportional to time because as the exposure time of the materials increased, the increase in AOPP was lower. This suggests that the viability of the cells decreased or the bacteria activated their proteolytic systems to restore fully oxidized proteins [61]. In addition, the AOPP levels increased with higher concentrations, with the maximum AOPP production occurring at MIC × 10. In the case of the 1-Cu material, the levels increased to 705 ± 233% and 390 ± 4%, with respect to the control, in S. aureus and E. coli, respectively. Similar patterns were observed with the 2-Cu and 3-Cu materials, with increases of 864 ± 186% and 874 ± 198% for S. aureus, and 647 ± 20% and 764 ± 1% for E. coli, respectively.
Therefore, from these results, it can be concluded that the increase of ROS and AOPP promoted by these materials in both S. aureus and E. coli could be the mechanism of bacterial death.

3. Materials and Methods

3.1. General Remarks on Characterization of the Materials

To characterize the nanomaterials, TEM measurements were conducted using a TECNAI G2 20 TWIN instrument (FEI Company, Hillsboro, OR, USA) operating at 200 kV, equipped with a LaB6 filament and high angle annular dark-field-scanning transmission electron microscopy (HAADF-STEM). The samples were dispersed into an ethanol solvent and placed in an ultrasonic bath for 15 min before being spread onto a TEM copper grid (300 mesh) covered with a holey carbon film. The grid was then air-dried at room temperature. The textural properties of the samples were determined using N2 physisorption in a Tristar II Plus instrument (Micromeritics Instrument Corporation, Norcross, GA, USA). The samples were previously degassed in the SmartVacPrep system (Micromeritics Instrument Corporation, Norcross, GA, USA) at 70 °C up to a vacuum level of 1 × 10−3 mm Hg for 12 h and were finally analyzed at −196 °C. BET and BJH formalism of the desorption branch were used to obtain the surface area and the pore size distribution. An ICP-AES study was carried out in an Agilent 5100 Dual View. Thermogravimetric analyses (TG) were performed on a thermal analyzer TG-Q500 (TA Instruments, New Castle, DE, USA) starting from room temperature and increasing to 750 °C under a nitrogen atmosphere at a heating rate of 10 °C min−1. The powder XRD patterns were collected on a Phillips X’PERT powder diffractometer with CuKα radiation (λ = 1.5418 Å) in the following ranges: 0.8 < 2θ < 10° and 5 < 2θ < 90° (depending on the sample) and with a step size of 0.026°, as well as an acquisition time of 2.5 s per step at 25 °C. The Fouriertransformed infrared (IR) spectra (400–4000 cm−1) were recorded on a Nicolet FT-IR 6700 spectrometer in KBr pellets. The DR-UV measurements were acquired in a UV/Vis Shimadzu spectrophotometer. These spectra were recorded at room temperature with BaSO4 as a reference material. 13C CP MAS NMR solid-state NMR measurements were carried out on the powder samples and recorded in a high-resolution mode, at 298 K, on a Bruker Avance 400 WB spectrometer (Bruker, MA, USA) at 9.4 T, using 100.66 and 400.17 MHz resonance frequencies (1H and 13C, respectively). The 13C experiments were performed with cross-polarization (CP), high-power decoupling, and magic angle spinning (MAS), using a Bruker double-bearing probe head (Bruker, MA, USA) and 4 mm zirconia rotors driven by dry air. The MAS rates were 10 kHz. The Hartmann–Hahn conditions for 13C were matched using adamantane. The recycle delay was 5 s and the contact time was 2 ms. The chemical shifts used glycine (Gly) as an external standard (dCO of Gly = 176.5 ppm).
The quantification of the absorbance in the in vitro studies was carried out using the Tecan Infinite M200 Plate Reader (Tecan, Switzerland). The absorbances used were 492 nm using 620 nm as a reference filter, 570 nm, and 600 nm. The bactericidal mechanism of the materials was observed using a Jeol JEM 1400 transmission electron microscope (Jeol Ltd., Tokyo, Japan). For this purpose, sections were collected on 200 mesh nickel grids. The Ultracut UC7 ultramicrotome (Leica Microsystems, Wetzlar, Germany) was used for sample preparation.

3.2. Synthesis of Mesoporous Silica Nanoparticles (MSNs)

MSN nanoparticles were synthesized by a modification of the method previously published by Zhao and coworkers [62]. In summary, an aqueous solution of 2.74 mmol of CTAB (N-ethyltrimethylammonium bromide) was dissolved in 480 mL of water. Sodium hydroxide (2.0 M, 3.5 mL) was added at room temperature and the mixture was heated up to 80 °C. Then, 5 mL (22.4 mmol) of the silica precursor TEOS (tetraethyl orthosilicate) was added dropwise and vigorously stirred for 2 h. The white precipitate was isolated by filtration, washed with abundant water and methanol, and dried for 24 h at 80 °C in an oven. Finally, a calcination process was carried out at 550 °C for 24 h with a temperature ramp of 1 °C/min.

3.3. Functionalization of Silica Materials with Amino Ligand: Synthesis of MSN–AP

To functionalize the MSN with 3-aminopropyltriethoxysilane, a mass ratio of 1:2 MSN to AP was employed. The MSN was first dehydrated by subjecting it to vacuum treatment at 80 °C for 24 h. The dehydrated MSN was then suspended in 50 mL of dry toluene, followed by addition of the amino ligand to the mixture, which was stirred at 110 °C for 48 h. After this period, the resulting suspension was centrifuged at 6000 rpm for 10 min, and the solid fraction was washed thoroughly with toluene and diethyl ether. The resulting white powder was then dried at 80 °C on a stove for 24 h. The material obtained was named MSN–AP.

3.4. Preparation of MSN–AP with Fluoroquinolone Ligand: Synthesis of Materials 1, 2, and 3

The fluoroquinolones used were 1-cyclopropyl-6,7,8-trifluoro-4-oxo-1,4-dihydroquinolone-3-carboxylic acid (3F-FQ), 1-cyclopropyl-6,7-difluoro-4-oxo-1,4-dihydroquinolone-3-carboxylic acid (2F-FQ), and 7-chloro-1-cyclopropyl-6-fluoro-4-oxo-1,4-dihydroquinolone-3-carboxylic acid (3F-FQ).
The theoretical level of 10% w/w SiO2/FQ was used to functionalize the MSN–AP. To incorporate the fluoroquinolone ligand, an EDAC coupling process was carried out in an MES buffer. Initially, a DMSO solution containing the corresponding fluoroquinolone ligand was added to the MES buffer, along with EDAC and NHS, in a molar proportion of 1:2.5. The resulting mixture was subjected to vigorous stirring for 15 min at room temperature. After this, MSN–AP was added, and the resulting solution was stirred for an additional 2 h at room temperature. Finally, the solid was isolated by centrifugation (6000 rpm, 10 min) and washed with DMSO, water, ethanol, and diethyl ether to produce materials 1 (MSN-AP-3F-FQ), 2 (MSN-AP-2F-FQ), and 3 (MSN-AP-FCl-FQ).

3.5. Preparation of Copper and Silver Materials

For the synthesis of the copper-containing materials, a suspension of the materials previously functionalized with fluoroquinolone ligand, namely, 1 (MSN-AP-3F-FQ), 2 (MSN-AP-2F-FQ), and 3 (MSN-AP-FCl-FQ), was stirred in 60 mL of acetonitrile. With the aim of preparing materials with a 1:1 molar ratio (ligand/copper), a composition of 10% by mass of the ligand was assumed in each case, and the appropriate amount of Cu(NO3)2·2.5H2O was added, followed by triethylamine (Et3N) in a 1:1 base:Cu molar ratio. The reaction was refluxed for 24 h. The product was isolated by centrifugation (6000 rpm, 10 min) and washed with acetonitrile (×3) and water (×3). The materials were named 1-Cu, 2-Cu, and 3-Cu.
The silver materials were synthesized using the same procedure as described for the copper materials. In this case, the metal salt used was AgNO3 and the reaction was kept in the dark. The synthesized materials were named 1-Ag, 2-Ag, and 3-Ag.

3.6. Preparation of 1-Ag@PTN Material

In order to load the 1-Ag material with phenytoin sodium (PTN), a 1 mL saturated solution of the PTN in water was added to 10 mg of the 1-Ag material. This mixture was kept at 500 rpm and 4 °C for 20 h. Subsequently, the solid product was isolated by centrifugation (6000 rpm, 10 min) and washed once with water and ethanol in a ratio of 1:1. The resulting product was dried at room temperature. The phenytoin sodium-loaded material was named 1-Ag@PTN.

3.7. In Vitro Studies

3.7.1. Bacteria

Four types of bacteria from the American Type Culture Collection (ATCC) were studied: two of them were gram-negative (Escherichia coli ATCC 25922 and Pseudomonas aeruginosa ATCC 27853) and another two were gram-positive (Staphylococcus aureus ATCC 29213 and Enterococcus faecalis ATCC 29212). In addition to these bacteria, two clinical strains of P. aeruginosa, PA8 and PA13, and two clinical strains of methicillin-resistant S. aureus (MRSA), MRSA1 and MRSA2, isolated in the Clinical Microbiology department of the Fundación Jimenez Díaz, were used (Table 8). All the strains were stored frozen at −80 °C until the experiments were performed.

3.7.2. Minimum Inhibitory Concentration and Minimum Bactericidal Concentration

The standardized Clinical and Laboratory Standards Institute’s microdilution method was used to determine the minimum inhibitory concentrations (MIC) of the seven materials [63]. The inoculum was prepared by diluting the cultures overnight to a cell concentration of 1–5 × 108 colony-forming unit per mL (CFU/mL), corresponding to 0.5 on the McFarland scale, which was then diluted 1:100 in Mueller Hinton Broth (MHB) medium. Serial dilutions were performed from 2000 to 1.953 µg/mL in a 96-well microplate, and the inoculum was added at a concentration of 1–5 × 106 CFU/mL. After incubating for 18 h at 37 °C and 5% CO2, MTT (3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyltetrazole bromide) was used as the developing agent to determine the lowest concentration where no microbial growth was observed after 18 h of incubation, which was defined as the MIC.
The minimum bactericidal concentration (MBC) was determined using the flash microdilution method with some modifications [64]. Briefly, after 24 h of incubation, 20 μL of each well was mixed with 180 μL of tryptic soy broth (TSB) in a new 96-well plate and incubated at 37 °C and 5% CO2 for 24 h. The absorbance at 600 nm was measured to determine the bactericidal concentration of each well, and the MBC was defined as the lowest concentration where the death of 99.9% of the initial inoculum occurred.

3.7.3. Minimal Biofilm Inhibitory Concentration and Minimal Biofilm Eradication Concentration

The minimum inhibitory concentrations (MBIC) and minimum biofilm eradication concentrations (MBEC) were determined using the methodology previously described [65]. The MBIC is the minimum concentration necessary to inhibit the visible growth of a bacterial biofilm. To determine the MBIC, biofilm formation was induced on the pegs of the Calgary device. For this purpose, a 96-well plate (Thermo Fisher Scientific, Waltham, MA, USA) was inoculated with 200 µL of TSB containing 106 CFU/mL bacteria per well. The lid (Thermo Fisher Scientific, Waltham, MA, USA) of the Calgary device was then put in place, and the plate was incubated at 37 °C and 5% CO2 for 24 h. After incubation, the lid pegs were rinsed twice using wells containing 200 µL of 0.9% NaCl saline. The lid was then placed on a plate with different concentrations of the tested materials, ranging from 1000 to 1.953 µg/mL, with a twofold dilution; MHB was added to a final volume of 200 µL per well. This plate was incubated at 37 °C and 5% CO2 for at least 20 h. After incubation, the MBIC values were determined using MTT as the developing agent. For this purpose, 20 µL of MTT was added to each well and shaking was induced at 90 rpm in an incubator at 37 °C for 1.5 h. After incubation, the absorbance was measured at 570 nm. The experiments were performed in triplicate.
MBEC is the minimum concentration necessary to kill a bacterial biofilm. For MBEC, the MBIC lid was rinsed twice in a plate with wells containing 200 µL of 0.9% NaCl saline, placed in a plate with 200 µL of TSB, and statically incubated at 37 °C and 5% CO2 for 24 h. After incubation, the MBEC was determined by measuring the absorbance at 600 nm.

3.7.4. Effect on Biofilm Development

To study whether the materials inhibit biofilm development, one 96-well plate was used for each P. aeruginosa strain. The materials used were unmodified MSN as a control and 1-Ag loaded and unloaded with phenytoin sodium (1-Ag@PTN and 1-Ag). The concentration used for each material was 4 times the MIC of the drug-containing material, considering previous studies that state that 4 × MIC is a good therapeutic approach [52,53,54]. For this purpose, 200 µL of 1 × 106 CFU/mL in TSB + 1% glucose of each strain with a 4 × MIC concentration of the material was deposited in a 96-well flat-bottom plate and incubated at 37 °C and 5% CO2 for 24 h. After incubation, each well was rinsed twice with 200 µL of saline. Biofilm quantification was performed according to a previously reported methodology [66]. To begin with, each well was fixed with 200 µL of MeOH and kept for 20 min in open air. The supernatant was then removed and allowed to dry at 60 °C. After fixation, staining was performed; thus, 150 µL of 1% safranin was added for 15 min to allow the dye to penetrate through the biofilm. Finally, each well was rinsed twice with 200 µL of distilled water and then was solubilized with absolute ethanol. Finally, the absorbance was measured at 492 nm in a colorimeter using 620 nm as a reference filter. This experiment was performed in eight wells for each material and strain and in triplicate (n = 24).

3.7.5. Inhibition in Wound-like Medium

Biofilm development in a wound-like medium was determined using previously described methods based on the Lubbock chronic wound medium [67,68]. The wound-like medium was composed of 50% bovine plasma (Sigma-Aldrich), 45% Bolton broth (Sigma-Aldrich, St. Louis, MO, USA), and 5% lacquered horse red blood cells (Thermo Fisher Scientific, Waltham, MA, USA), supplemented with or without (positive control) the tested material at a concentration of 4 times MIC or 4 times MBC. Half a milliliter of each medium was incubated with 5 µL of 108 CFU/mL of P. aeruginosa strain ATCC 27853 for 24 h at 37 °C and 5% CO2. After incubation, 0.5 mL of saline was added and sonicated for 5 min. Then, this sonicated saline was serially diluted with saline, and the CFU per milliliter was estimated by the drop plate method on MacConkey agar plates. This experiment was performed in quintuplicate for each material (n = 5).

3.7.6. Bactericidal Mechanism of the 1-Ag@PTN Material Using TEM

The bactericidal mechanism of the final 1-Ag@PTN material in strain ATCC 27853 was analyzed by transmission electron microscopy (TEM). The concentration of the material used was 2 × MBC. The protocol used for this was described previously [69]. Thin sections (60 nm) were cut for TEM of the resin-included bacteria using a Leica Ultracut ultramicrotome UC7 (Leica Microsystems, Germany). Sections were collected on 200-mesh nickel grids and examined with a Jeol JEM 1400 transmission mission electron microscope (Jeol Ltd., Tokyo, Japan).

3.7.7. Oxidative Stress Studies

Bacterial suspensions (100 μL) of S. aureus ATCC 29213 and E. coli ATCC 25922 were incubated with 100 μL of each copper material (1-Cu, 2-Cu, and 3-Cu) using phosphate buffered saline (PBS) as a control and sub-MIC (MIC/10), MIC, and supra-MIC (MIC × 10) concentrations of each material for 1 and 4 h at 37 °C. After incubation, 20 μL of a 20 μM aqueous solution of 2′,7′-dichlorodihydrofluorescein diacetate diacetoxymethyl ester (H2-DCFDA, Sigma-Aldrich) was added. After 30 min, the fluorescence intensity was measured on a Biotek Synergy HT spectrofluorometer (BioTek Instruments, Winooski, VT, USA), with excitation wavelengths of 480 nm and emission wavelengths of 520 nm. Non-treated bacterial suspensions were used as controls. The experiments were carried out in triplicate (n = 3).

3.7.8. Advanced Oxidation Protein Products (AOPP)

The AOPP levels were determined by the spectrophotometric method, using chloramine T as a reference, which, in the presence of KI, absorbs at 340 nm. Overnight cultures in TSB of S. aureus ATCC 29213 and E. coli ATCC 25922 were placed in contact with 0.5 mL suspensions of the studied materials (1-Cu, 2-Cu, and 3-Cu) at corresponding sub-MIC (MIC/10), MIC, and supra-MIC (MIC × 10) concentrations for 1, 4, and 24 h. PBS (pH 7) was used as a control. After the incubation periods, to 100 μL of each sample, a mixture of 50 μL of 1.16 M KI and 50 μL of acetic acid were added and the absorbance was measured at 340 nm with the Sunrise microplate reader (Tecan Trading AG, Switzerland). The experiments were performed in triplicate (n = 3).

3.7.9. PTN Release Studies

To evaluate the stability of the 1-Ag@PTN material and the amount of PTN released at different times, a PTN release experiment was conducted. Approximately 1 mg of the 1-Ag@PTN material was dispersed in a mixture of 4 mL 95:5 PBS buffer (pH = 7.4):DMSO, and incubated with slight shaking (30 rpm) at 37 °C for varying durations using a Roto-587 Therm incubator (Benchmark Scientific, Sayreville, NJ, USA) with temperature control. The resulting suspensions were filtered through a 0.2 µm nylon filter and analyzed by HPLC (Flexar Perkin-Elmer, Waltham, MA, USA) using a C18 column (COSMOSIL 5C18-MS-II 4.6 mm I.D. × 250 mm with a particle size of 4.4 µm) and a mobile phase consisting of 60:40 MeOH:H2O at a flow rate of 0.7 mL/min. The PTN was detected in the chromatograms at a retention time of 9.2 min.

3.8. Statistical Analysis

GraphPad Prism 8 software (version 8.01) was used to conduct statistical analyses. To compare two groups, a two-sided Mann–Whitney nonparametric test was employed, while a Kruskal–Wallis nonparametric test was utilized for comparing more than two groups. The statistical significance was set at p-values ≤ 0.05, and all the results were expressed as the median and interquartile range.

4. Conclusions

In this study, seven materials based on mesoporous silica nanoparticles functionalized with halogenated derivatives of FQ with Ag+ or Cu2+ were synthesized and characterized. The evaluation of MIC and MBC was performed against two Gram-positive strains (S. aureus and E. faecalis) and two Gram-negative strains (E. coli and P. aeruginosa). The Cu2+ systems only showed antibacterial activity against S. aureus and E. coli, and, according to the oxidative stress study, this activity could mainly be due to the increase in ROS generation, as they can increase the generation of this type of reactive species by almost three times. However, although the Cu2+ materials showed bactericidal activity against E. coli and S. aureus, they were not active against clinical MRSA strains. Nevertheless, the Ag+ materials showed a wider spectrum of activity, and were even able to inhibit clinical strains of MRSA and P. aeruginosa, which are usually less susceptible to or more resistant to antibiotics.
On the other hand, all the silver materials inhibited biofilm growth, although eradication was only successful in the case of the PA8 strain. Furthermore, in the search for a bifunctional material capable of inhibiting bacterial biofilm and promoting tissue regeneration, the proliferative drug sodium phenytoin was encapsulated in the 1-Ag material, resulting in the material named 1-Ag@PTN. After encapsulation, the MIC and MBC values of the loaded material were determined, and it was observed that the concentrations decreased significantly due to the additive effect between silver and PTN. However, in the biofilm state, the minimum concentrations did not undergo significant changes; moreover, the silver materials showed no capacity to eradicate the biofilm. Despite this, the inhibitory capacity of 1-Ag and 1-Ag@PTN materials to prevent biofilm development was evaluated, and once again, the additive effect caused by the co-administration of silver with sodium phenytoin was observed, since in the ATCC 27853 and PA13 strains, the loaded material showed greater reduction in development.
Finally, the 1-Ag@PTN material showed, in the worst case, the ability to reduce biofilm development by up to 55% and inhibit bacterial growth in a “wound-like medium” by up to 89.33%, making it a promising material that should continue to be explored for the treatment of chronic wound infections with further studies in vivo.
In general, the materials reported here have antibacterial activities comparable to other systems based on recent approaches that have used nanocomposites, such as Ag2S quantum dots [70], biopolymer hydrogels reinforced by copper/tannic acid nanosheets [71], or enzyme-silver-polymers nanocomposites [72]. In this context, our current nanosystems seem to need a comparable, if not somewhat lower amount of copper or silver; however, they do not require other activating sources (light or oxidative species) to demonstrate similar activities. In this context, the nanosystems reported here may be beneficial to superficial wound infections when appropriately formulated for topical use. This will be one of the main objectives of our research teams in future studies.

Supplementary Materials

The following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/ph16070961/s1, Figure S1: Particle size distributions of (a) 1-Cu, (b) 1-Ag, (c) 1-Ag@PTN, (d) 2-Cu, (e) 2-Ag, (f) 3-Cu, and (g) 3-Ag; Figure S2: Nitrogen adsorption (solid line) and desorption (dashed line) isotherms of materials based on (a) 1, (b) 2, and (c) 3; Figure S3: Pore size distribution of materials based on 1 (a), 2 (b), and 3 (c); Figure S4: Thermogravimetric studies of materials based on 1 (a), 2 (b), and 3 (c); Figure S5: Small-angle XRD patterns of materials based on 2 (a) and 3 (b); Figure S6: XRD diffractograms of (a) 1-Ag, 2-Ag, and 3-Ag with AgCl and (b) 1-Ag@PTN with MSN@PTN; Figure S7: FT-IR spectra of the starting material MSN and final functionalized materials based on (a) 1, (b) 2, and (c) 3; Figure S8: DR-UV spectra of the final materials based on (a) 1, (b) 2, and (c) 3; Figure S9: 13C CP MAS NMR spectra of materials (a) 1, (b) 2, and (c) 3; Figure S10: PTN release in 1-Ag@PTN; Table S1: XRD data of MSN and its functionalized materials.

Author Contributions

Conceptualization, J.J.A.-C., P.L.P. and S.G.-R.; methodology, M.U.-A., J.J.A.-C., E.N., P.L.P., E.S.S. and S.G.-R.; investigation, M.U.-A., J.J.A.-C., E.N. and P.L.P.; resources, J.E., P.L.P., E.S.S. and S.G.-R.; writing—original draft preparation, M.U.-A., J.J.A.-C., E.S.S. and S.G.-R.; writing—review and editing, M.U.-A., J.J.A.-C., P.L.P., E.S.S. and S.G.-R.; supervision, J.J.A.-C., E.S.S. and S.G.-R. Authorship is limited to those who contributed substantially to the work reported. All authors have read and agreed to the published version of the manuscript.

Funding

We gratefully acknowledge funding from the research project RTI2018-094322-B-I00 financed by MCIN/AEI/10.13039/501100011033/ and “ERDF A way of making Europe”, the Research Thematic Network RED2022-134091-T financed by MCIN/AEI/10.13039/501100011033, the University of the Basque Country UPV/EHU (GIC18/143) and (GIU20/028) and the Gobierno Vasco/Eusko Jaurlaritza (IT1755-22).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Data is contained within the article and Supplementary Materials.

Acknowledgments

M.U.-A. is grateful to the Government of the Basque Country for the predoctoral fellowship. The authors thank the technical and human support provided by SGIker of UPV/EHU.

Conflicts of Interest

J.E. received travel grants from Pfizer and conference fees from bioMérieux and Heraeus. The funders had no role in the design of the study or in the collection, analyses, or interpretation of data. The remaining authors declare no conflict of interest.

References

  1. WHO. Global Action Plan on Antimicrobial Resistance. Microbe Mag. 2015, 10, 354–355. [Google Scholar] [CrossRef]
  2. McKenna, M. Antibiotic resistance: The last resort. Nature 2013, 499, 394–396. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  3. Deva, A.K.; Adams, W.P.; Vickery, K. The role of bacterial biofilms in device-associated infection. Plast. Reconstr. Surg. 2013, 132, 1319–1328. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  4. Bjarnsholt, T. The role of bacterial biofilms in chronic infections. APMIS 2013, 121, 1–58. [Google Scholar] [CrossRef] [PubMed]
  5. Mishra, S.; Gupta, A.; Upadhye, V.; Singh, S.C.; Sinha, R.P.; Häder, D.P. Therapeutic Strategies against Biofilm Infections. Life 2023, 13, 172. [Google Scholar] [CrossRef]
  6. Forier, K.; Raemdonck, K.; De Smedt, S.C.; Demeester, J.; Coenye, T.; Braeckmans, K. Lipid and polymer nanoparticles for drug delivery to bacterial biofilms. J. Control. Release 2014, 190, 607–623. [Google Scholar] [CrossRef] [Green Version]
  7. Wang, Y.; Zhao, Q.; Han, N.; Bai, L.; Li, J.; Liu, J.; Che, E.; Hu, L.; Zhang, Q.; Jiang, T.; et al. Mesoporous silica nanoparticles in drug delivery and biomedical applications. Nanomed. Nanotechnol. Biol. Med. 2015, 11, 313–327. [Google Scholar] [CrossRef]
  8. Manzano, M.; Vallet-Regí, M. Mesoporous silica nanoparticles in nanomedicine applications. J. Mater. Sci. Mater. Med. 2018, 29, 65. [Google Scholar] [CrossRef]
  9. Castillo, R.R.; Vallet-Regí, M. Recent Advances toward the Use of Mesoporous Silica Nanoparticles for the Treatment of Bacterial Infections. Int. J. Nanomed. 2021, 16, 4409–4430. [Google Scholar] [CrossRef] [PubMed]
  10. Selvarajan, V.; Obuobi, S.; Ee, P.L.R. Silica Nanoparticles—A Versatile Tool for the Treatment of Bacterial Infections. Front. Chem. 2020, 8, 602. [Google Scholar] [CrossRef]
  11. Bisacchi, G.S. Origins of the Quinolone Class of Antibacterials: An Expanded “Discovery Story”. J. Med. Chem. 2015, 58, 4874–4882. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  12. Andersson, M.I.; MacGowan, A.P. Development of the quinolones. J. Antimicrob. Chemother. 2003, 51, 1–11. [Google Scholar] [CrossRef] [PubMed]
  13. Castro, W.; Navarro, M.; Biot, C. Medicinal potential of ciprofloxacin and its derivatives. Future Med. Chem. 2013, 5, 81–96. [Google Scholar] [CrossRef]
  14. Redgrave, L.S.; Sutton, S.B.; Webber, M.A.; Piddock, L.J.V. Fluoroquinolone resistance: Mechanisms, impact on bacteria, and role in evolutionary success. Trends Microbiol. 2014, 22, 438–445. [Google Scholar] [CrossRef] [PubMed]
  15. de Juan Mora, B.; Filipe, L.; Forte, A.; Santos, M.M.; Alves, C.; Teodoro, F.; Pedrosa, R.; Ribeiro Carrott, M.; Branco, L.C.; Gago, S. Boosting Antimicrobial Activity of Ciprofloxacin by Functionalization of Mesoporous Silica Nanoparticles. Pharmaceutics 2021, 13, 218. [Google Scholar] [CrossRef] [PubMed]
  16. Alandiyjany, M.N.; Abdelaziz, A.S.; Abdelfattah-Hassan, A.; Hegazy, W.A.H.; Hassan, A.A.; Elazab, S.T.; Mohamed, E.A.A.; El-Shetry, E.S.; Saleh, A.A.; Elsawy, N.A.; et al. Novel In Vivo Assessment of Antimicrobial Efficacy of Ciprofloxacin Loaded Mesoporous Silica Nanoparticles against Salmonella typhimurium Infection. Pharmaceuticals 2022, 15, 357. [Google Scholar] [CrossRef]
  17. Lee, N.-Y.; Ko, W.-C.; Hsueh, P.-R. Nanoparticles in the Treatment of Infections Caused by Multidrug-Resistant Organisms. Front. Pharmacol. 2019, 10, 1153. [Google Scholar] [CrossRef] [Green Version]
  18. Zazo, H.; Colino, C.I.; Lanao, J.M. Current applications of nanoparticles in infectious diseases. J. Control. Release 2016, 224, 86–102. [Google Scholar] [CrossRef]
  19. Ude, Z.; Flothkötter, N.; Sheehan, G.; Brennan, M.; Kavanagh, K.; Marmion, C.J. Multi-targeted metallo-ciprofloxacin derivatives rationally designed and developed to overcome antimicrobial resistance. Int. J. Antimicrob. Agents 2021, 58, 106449. [Google Scholar] [CrossRef]
  20. Telfer, A.J. Ciprofloxacin Metal Complexes and Linked Dimers as Potential Antimicrobial Agents; University of York: York, UK, 2020. [Google Scholar]
  21. Ferreira, M.; Gameiro, P.; Ruiz, J.; Pons, M.J. Fluoroquinolone-Transition Metal Complexes: A Strategy to Overcome Bacterial Resistance. Microorganisms 2021, 9, 1506. [Google Scholar] [CrossRef]
  22. Shaikh, A.; Giridhar, R.; Megraud, F.; Yadav, M.R. Metalloantibiotics: Synthesis, characterization and antimicrobial evaluation of bismuth-fluoroquinolone complexes against Helicobacter pylori. Acta Pharm. 2009, 59, 259–271. [Google Scholar] [CrossRef]
  23. Rusu, A.; Hancu, G.; Cristina Munteanu, A.; Uivarosi, V. Development perspectives of silver complexes with antibacterial quinolones: Successful or not? J. Organomet. Chem. 2017, 839, 19–30. [Google Scholar] [CrossRef]
  24. Uivarosi, V. Metal Complexes of Quinolone Antibiotics and Their Applications: An Update. Molecules 2013, 18, 11153. [Google Scholar] [CrossRef] [PubMed]
  25. De Oliveira, L.P.; Carneiro, Z.A.; Ribeiro, C.M.; Lima, M.F.; Paixão, D.A.; Pivatto, M.; De Souza, M.V.N.; Teixeira, L.R.; Lopes, C.D.; De Albuquerque, S.; et al. Three new platinum complexes containing fluoroquinolones and DMSO: Cytotoxicity and evaluation against drug-resistant tuberculosis. J. Inorg. Biochem. 2018, 183, 77–83. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  26. Ferreira, M.; Bessa, L.J.; Sousa, C.F.; Eaton, P.; Bongiorno, D.; Stefani, S.; Campanile, F.; Gameiro, P. Fluoroquinolone Metalloantibiotics: A Promising Approach against Methicillin-Resistant Staphylococcus aureus. Int. J. Environ. Res. Public Health 2020, 17, 3127. [Google Scholar] [CrossRef]
  27. Chohan, Z.H.; Supuran, C.T.; Scozzafava, A. Metal binding and antibacterial activity of ciprofloxacin complexes. J. Enzym. Inhib. Med. Chem. 2005, 20, 303–307. [Google Scholar] [CrossRef] [Green Version]
  28. El-Gamel, N.E.A. Silver(I) complexes as precursors to produce silver nanowires: Structure characterization, antimicrobial activity and cell viability. Dalt. Trans. 2013, 42, 9884–9892. [Google Scholar] [CrossRef]
  29. Salah, I.; Parkin, I.P.; Allan, E. Copper as an antimicrobial agent: Recent advances. RSC Adv. 2021, 11, 18179–18186. [Google Scholar] [CrossRef]
  30. Dalecki, A.G.; Crawford, C.L.; Wolschendorf, F. Copper and Antibiotics: Discovery, Modes of Action, and Opportunities for Medicinal Applications. Adv. Microb. Physiol. 2017, 70, 193–260. [Google Scholar] [CrossRef]
  31. Borkow, G.; Gabbay, J. Copper, An Ancient Remedy Returning to Fight Microbial, Fungal and Viral Infections. Curr. Chem. Biol. 2009, 3, 272–278. [Google Scholar] [CrossRef]
  32. Alexander, J.W. History of the medical use of silver. Surg. Infect. 2009, 10, 289–292. [Google Scholar] [CrossRef] [Green Version]
  33. Lansdown, A.B.G. Silver I: Its antibacterial properties and mechanism of action. J. Wound Care 2002, 11, 125–130. [Google Scholar] [CrossRef] [PubMed]
  34. Nussbaum, S.R.; Carter, M.J.; Fife, C.E.; DaVanzo, J.; Haught, R.; Nusgart, M.; Cartwright, D. An Economic Evaluation of the Impact, Cost, and Medicare Policy Implications of Chronic Nonhealing Wounds. Value Health 2018, 21, 27–32. [Google Scholar] [CrossRef] [Green Version]
  35. Hasamnis, A.A.; Mohanty, B.K.; Muralikrishna; Patil, S. Evaluation of Wound Healing Effect of Topical Phenytoin on Excisional Wound in Albino Rats. J. Young Pharm. 2010, 2, 59–62. [Google Scholar] [CrossRef] [Green Version]
  36. Keppel Hesselink, J.M. Phenytoin repositioned in wound healing: Clinical experience spanning 60 years. Drug Discov. Today 2018, 23, 402–408. [Google Scholar] [CrossRef] [PubMed]
  37. Ai, X.; Liu, H.; Lu, C.; Liang, C.; Sun, Y.; Chen, S.; Sun, B.; Li, Y.; Liu, Y.; Zhang, Q.; et al. Phenytoin silver: A new nanocompound for promoting dermal wound healing via comprehensive pharmacological action. Theranostics 2017, 7, 425–435. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  38. Ugalde-Arbizu, M.; Aguilera-Correa, J.J.; Mediero, A.; Esteban, J.; Páez, P.L.; San Sebastian, E.; Gómez-Ruiz, S. Hybrid Nanosystems Based on Nicotinate-Functionalized Mesoporous Silica and Silver Chloride Nanoparticles Loaded with Phenytoin for Preventing Pseudomonas aeruginosa Biofilm Development. Pharmaceuticals 2022, 15, 884. [Google Scholar] [CrossRef]
  39. Thommes, M.; Kaneko, K.; Neimark, A.V.; Olivier, J.P.; Rodriguez-Reinoso, F.; Rouquerol, J.; Sing, K.S.W. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report). Pure Appl. Chem. 2015, 87, 1051–1069. [Google Scholar] [CrossRef] [Green Version]
  40. Yu, H.; Yu, J.; Cheng, B.; Lin, J. Synthesis, characterization and photocatalytic activity of mesoporous titania nanorod/titanate nanotube composites. J. Hazard. Mater. 2007, 147, 581–587. [Google Scholar] [CrossRef]
  41. Colón, G.; Hidalgo, M.C.; Navío, J.A. A novel preparation of high surface area TiO2 nanoparticles from alkoxide precursor and using active carbon as additive. Catal. Today 2002, 76, 91–101. [Google Scholar] [CrossRef]
  42. Liu, S.; Zhang, H.; Meng, X.; Zhang, Y.; Ren, L.; Nawaz, F.; Liu, J.; Li, Z.; Xiao, F.-S. Ordered hexagonal mesoporous silica materials (SBA-15) with additional disordered large-mesopore networks formed by gaseous expansion. Microporous Mesoporous Mater. 2010, 136, 126–131. [Google Scholar] [CrossRef]
  43. Serra, E.; Mayoral, Á.; Sakamoto, Y.; Blanco, R.M.; Díaz, I. Immobilization of lipase in ordered mesoporous materials: Effect of textural and structural parameters. Microporous Mesoporous Mater. 2008, 114, 201–213. [Google Scholar] [CrossRef]
  44. Díaz-García, D.; Ardiles, P.; Prashar, S.; Rodríguez-Diéguez, A.; Páez, P.; Gómez-Ruiz, S. Preparation and Study of the Antibacterial Applications and Oxidative Stress Induction of Copper Maleamate-Functionalized Mesoporous Silica Nanoparticles. Pharmaceutics 2019, 11, 30. [Google Scholar] [CrossRef] [Green Version]
  45. Díaz-García, D.; Ardiles, P.R.; Díaz-Sánchez, M.; Mena-Palomo, I.; del Hierro, I.; Prashar, S.; Rodríguez-Diéguez, A.; Páez, P.L.; Gómez-Ruiz, S. Copper-functionalized nanostructured silica-based systems: Study of the antimicrobial applications and ROS generation against gram positive and gram negative bacteria. J. Inorg. Biochem. 2020, 203, 110912. [Google Scholar] [CrossRef]
  46. Qu, S.; Dai, C.; Shen, Z.; Tang, Q.; Wang, H.; Zhai, B.; Zhao, L.; Hao, Z. Mechanism of Synergy between Tetracycline and Quercetin against Antibiotic Resistant Escherichia coli. Front. Microbiol. 2019, 10, 2536. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  47. Liu, J.; Li, S.; Fang, Y.; Zhu, Z. Boosting antibacterial activity with mesoporous silica nanoparticles supported silver nanoclusters. J. Colloid Interface Sci. 2019, 555, 470–479. [Google Scholar] [CrossRef] [PubMed]
  48. Ma, C.; Wei, Q.; Cao, B.; Cheng, X.; Tian, J.; Pu, H.; Yusufu, A.; Cao, L. A multifunctional bioactive material that stimulates osteogenesis and promotes the vascularization bone marrow stem cells and their resistance to bacterial infection. PLoS ONE 2017, 12, e0172499. [Google Scholar] [CrossRef] [PubMed]
  49. Wan, B.; Zhu, Y.; Tao, J.; Zhu, F.; Chen, J.; Li, L.; Zhao, J.; Wang, L.; Sun, S.; Yang, Y.; et al. Alginate Lyase Guided Silver Nanocomposites for Eradicating Pseudomonas aeruginosa from Lungs. ACS Appl. Mater. Interfaces 2020, 12, 9050–9061. [Google Scholar] [CrossRef]
  50. Church, D.; Elsayed, S.; Reid, O.; Winston, B.; Lindsay, R. Burn wound infections. Clin. Microbiol. Rev. 2006, 19, 403–434. [Google Scholar] [CrossRef] [Green Version]
  51. Rahim, K.; Saleha, S.; Zhu, X.; Huo, L.; Basit, A.; Franco, O.L. Bacterial Contribution in Chronicity of Wounds. Microb. Ecol. 2017, 73, 710–721. [Google Scholar] [CrossRef]
  52. Aguilera-Correa, J.J.; Gisbert-Garzarán, M.; Mediero, A.; Carias-Cálix, R.A.; Jiménez-Jiménez, C.; Esteban, J.; Vallet-Regí, M. Arabic gum plus colistin coated moxifloxacin-loaded nanoparticles for the treatment of bone infection caused by Escherichia coli. Acta Biomater. 2022, 137, 218–237. [Google Scholar] [CrossRef] [PubMed]
  53. Peeters, E.; Nelis, H.J.; Coenye, T. In vitro activity of ceftazidime, ciprofloxacin, meropenem, minocycline, tobramycin and trimethoprim/sulfamethoxazole against planktonic and sessile Burkholderia cepacia complex bacteria. J. Antimicrob. Chemother. 2009, 64, 801–809. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  54. Gounani, Z.; Asadollahi, M.A.; Pedersen, J.N.; Lyngsø, J.; Skov Pedersen, J.; Arpanaei, A.; Meyer, R.L. Mesoporous silica nanoparticles carrying multiple antibiotics provide enhanced synergistic effect and improved biocompatibility. Colloids Surf. B Biointerfaces 2019, 175, 498–508. [Google Scholar] [CrossRef] [PubMed]
  55. Roy, A.; Bulut, O.; Some, S.; Mandal, A.K.; Yilmaz, M.D. Green synthesis of silver nanoparticles: Biomolecule-nanoparticle organizations targeting antimicrobial activity. RSC Adv. 2019, 9, 2673–2702. [Google Scholar] [CrossRef] [PubMed]
  56. Yin, I.X.; Zhang, J.; Zhao, I.S.; Mei, M.L.; Li, Q.; Chu, C.H. The Antibacterial Mechanism of Silver Nanoparticles and Its Application in Dentistry. Int. J. Nanomed. 2020, 15, 2555–2562. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  57. Nam, G.; Rangasamy, S.; Purushothaman, B.; Song, J.M. The Application of Bactericidal Silver Nanoparticles in Wound Treatment. Nanomater. Nanotechnol. 2015, 5, 23. [Google Scholar] [CrossRef]
  58. Quinteros, M.A.; Cano Aristizábal, V.; Dalmasso, P.R.; Paraje, M.G.; Páez, P.L. Oxidative stress generation of silver nanoparticles in three bacterial genera and its relationship with the antimicrobial activity. Toxicol. In Vitro 2016, 36, 216–223. [Google Scholar] [CrossRef]
  59. Giachino, A.; Waldron, K.J. Copper tolerance in bacteria requires the activation of multiple accessory pathways. Mol. Microbiol. 2020, 114, 377–390. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  60. Ladomersky, E.; Petris, M.J. Copper tolerance and virulence in bacteria. Metallomics 2015, 7, 957–964. [Google Scholar] [CrossRef] [Green Version]
  61. Quinteros, M.A.; Viviana, C.A.; Onnainty, R.; Mary, V.S.; Theumer, M.G.; Granero, G.E.; Paraje, M.G.; Páez, P.L. Biosynthesized silver nanoparticles: Decoding their mechanism of action in Staphylococcus aureus and Escherichia coli. Int. J. Biochem. Cell Biol. 2018, 104, 87–93. [Google Scholar] [CrossRef] [Green Version]
  62. Zhao, Y.; Trewyn, B.G.; Slowing, I.I.; Lin, V.S.Y. Mesoporous Silica Nanoparticle-Based Double Drug Delivery System for Glucose-Responsive Controlled Release of Insulin and Cyclic AMP. J. Am. Chem. Soc. 2009, 131, 8398–8400. [Google Scholar] [CrossRef] [Green Version]
  63. CLSI. Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria That Grow Aerobically, 11th ed.; Wayne, C., Ed.; Clinical and Laboratory Standards Institute: Wayne, PA, USA, 2018. [Google Scholar]
  64. Hernandes, C.; Coppede, J.S.; Bertoni, B.W.; França, S.C.; Pereira, A.M.S. Flash microbiocide: A Rapid and Economic Method for Determination of MBC and MFC. Am. J. Plant Sci. 2013, 4, 850–852. [Google Scholar] [CrossRef]
  65. Ceri, H.; Olson, M.E.; Stremick, C.; Read, R.R.; Morck, D.; Buret, A. The Calgary Biofilm Device: New Technology for Rapid Determination of Antibiotic Susceptibilities of Bacterial Biofilms. J. Clin. Microbiol. 1999, 37, 1771–1776. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  66. Stepanović, S.; Vuković, D.; Hola, V.; Bonaventura, G.; Djukić, S.; Ćirković, I.; Ruzicka, F. Quantification of biofilm in microtiter plates: Overview of testing conditions and practical recommendations for assessment of biofilm production by staphylococci. APMIS 2007, 115, 891–899. [Google Scholar] [CrossRef] [PubMed]
  67. Sun, Y.; Dowd, S.E.; Smith, E.; Rhoads, D.D.; Wolcott, R.D. In vitro multispecies Lubbock chronic wound biofilm model. Wound Repair Regen. 2008, 16, 805–813. [Google Scholar] [CrossRef]
  68. DeLeon, S.; Clinton, A.; Fowler, H.; Everett, J.; Horswill, A.R.; Rumbaugh, K.P. Synergistic Interactions of Pseudomonas aeruginosa and Staphylococcus aureus in an In Vitro Wound Model. Infect. Immun. 2014, 82, 4718–4728. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  69. Limpens, E.; Lvanov, S.; Van Esse, W.; Voets, G.; Fedorova, E.; Bisseling, T. Medicago N2-Fixing Symbiosomes Acquire the Endocytic Identity Marker Rab7 But Delay the Acquisition of Vacuolar Identity. Plant Cell 2009, 21, 2811–2828. [Google Scholar] [CrossRef] [Green Version]
  70. Sun, P.; Li, K.; Wang, J.; Qiu, X.; Wei, W.; Zhao, J. Peptide-Mediated Aqueous Synthesis of NIR-II Emitting Ag2S Quantum Dots for Rapid Photocatalytic Bacteria Disinfection. Angew. Chem. Int. Ed. Eng. 2023, in press. [CrossRef]
  71. You, S.; Xiang, Y.; Qi, Y.; Mao, R.; Cai, E.; Lan, Y.; Lu, H.; Shen, J.; Deng, H. Harnessing a biopolymer hydrogel reinforced by copper/tannic acid nanosheets for treating bacteria-infected diabetic wounds. Mater. Today Adv. 2022, 15, 100271. [Google Scholar] [CrossRef]
  72. Xiong, J.; Cao, Y.; Zhao, H.; Chen, J.; Cai, X.; Li, X.; Liu, Y.; Xiao, H.; Ge, J. Cooperative Antibacterial Enzyme-Ag-Polymer Nanocomposites. ACS Nano 2022, 16, 19013–19024. [Google Scholar] [CrossRef]
Pharmaceuticals 16 00961 g001 550
Figure 1. TEM images of (a) 1-Cu, (b) 1-Ag, (c) 1-Ag@PTN, (d) 2-Cu, (e) 2-Ag, (f) 3-Cu, and (g) 3-Ag. Red arrows indicate nanoparticles compatible with Ag nanoparticles.
Figure 1. TEM images of (a) 1-Cu, (b) 1-Ag, (c) 1-Ag@PTN, (d) 2-Cu, (e) 2-Ag, (f) 3-Cu, and (g) 3-Ag. Red arrows indicate nanoparticles compatible with Ag nanoparticles.
Pharmaceuticals 16 00961 g001
Pharmaceuticals 16 00961 g002 550
Figure 2. Small-angle PXRD patterns of MSN-based materials.
Figure 2. Small-angle PXRD patterns of MSN-based materials.
Pharmaceuticals 16 00961 g002
Pharmaceuticals 16 00961 g003 550
Figure 3. Inhibition of biofilm development of ATCC 27853 (a), PA8 (b), and PA13 (c) in the presence of MSN (as a control; in black), 1-Ag (green), and 1-Ag@PTN (pink) at 62.5 µg/mL. ** p < 0.01, *** p < 0.001, **** p < 0.0001, according to Mann–Whitney and Kruskal–Wallis tests.
Figure 3. Inhibition of biofilm development of ATCC 27853 (a), PA8 (b), and PA13 (c) in the presence of MSN (as a control; in black), 1-Ag (green), and 1-Ag@PTN (pink) at 62.5 µg/mL. ** p < 0.01, *** p < 0.001, **** p < 0.0001, according to Mann–Whitney and Kruskal–Wallis tests.
Pharmaceuticals 16 00961 g003
Pharmaceuticals 16 00961 g004 550
Figure 4. The effect of 1-Ag@PTN against ATCC 27853 wound-like medium at 62.5 µg/mL (a) and 1 mg/mL (b). The control (black) and 1-Ag@PTN (pink) are shown. ** p < 0.01 for Mann–Whitney test.
Figure 4. The effect of 1-Ag@PTN against ATCC 27853 wound-like medium at 62.5 µg/mL (a) and 1 mg/mL (b). The control (black) and 1-Ag@PTN (pink) are shown. ** p < 0.01 for Mann–Whitney test.
Pharmaceuticals 16 00961 g004
Pharmaceuticals 16 00961 g005 550
Figure 5. TEM images of P. aeruginosa ATCC 27853 treated with (top) 0 (control) and (bottom) 500 µg/mL of 1-Ag@PTN. Red arrows indicate elements compatible with membrane vesicles.
Figure 5. TEM images of P. aeruginosa ATCC 27853 treated with (top) 0 (control) and (bottom) 500 µg/mL of 1-Ag@PTN. Red arrows indicate elements compatible with membrane vesicles.
Pharmaceuticals 16 00961 g005
Pharmaceuticals 16 00961 g006 550
Figure 6. Percentage increase of reactive oxygen species at 1 and 4 h of incubation (left) and of AOPP at 1, 4, and 24 h of incubation (right) in S. aureus (in red, orange, and yellow) and E. coli (in blue) at three concentrations of the materials: (a) 1-Cu, (b) 2-Cu, and (c) 3-Cu. The study was performed in triplicate and data are expressed as mean ± SD.
Figure 6. Percentage increase of reactive oxygen species at 1 and 4 h of incubation (left) and of AOPP at 1, 4, and 24 h of incubation (right) in S. aureus (in red, orange, and yellow) and E. coli (in blue) at three concentrations of the materials: (a) 1-Cu, (b) 2-Cu, and (c) 3-Cu. The study was performed in triplicate and data are expressed as mean ± SD.
Pharmaceuticals 16 00961 g006
Table
Table 1. Textural parameters obtained by nitrogen adsorption/desorption isotherms.
Table 1. Textural parameters obtained by nitrogen adsorption/desorption isotherms.
MaterialBET Surface (m2/g)Pore Volume (cm3/g)Pore Diameter (nm)
MSN9250.772.72
1-Cu450.09<2.00
1-Ag420.09<2.00
1-Ag@PTN270.07<2.00
2-Cu420.10<2.00
2-Ag390.11<2.00
3-Cu1440.12<2.00
3-Ag390.10<2.00
Table
Table 2. Quantification of ligands, metals, and PTN by TG or ICP-AES. Values are given in mmol per gram of material.
Table 2. Quantification of ligands, metals, and PTN by TG or ICP-AES. Values are given in mmol per gram of material.
MaterialAPFQCuAgPTN
1-Cu0.700.280.20--
1-Ag0.700.28-0.32-
1-Ag@PTN0.700.28-0.231.16
2-Cu0.700.290.15--
2-Ag0.700.29-0.13-
3-Cu0.700.360.13--
3-Ag0.700.36-0.10-
Table
Table 3. MIC and MBC values of the final functionalized materials against commercial bacterial strains in planktonic state. Values are given in μg of material/mL and μg metal/mL (in brackets).
Table 3. MIC and MBC values of the final functionalized materials against commercial bacterial strains in planktonic state. Values are given in μg of material/mL and μg metal/mL (in brackets).
MaterialS. aureus ATCC 29213E. faecalis ATCC 29212
MICMBCMICMBC
MSN50010005001000
1-Cu250 (3.25)250 (3.25)>2000 (26.00)>2000 (26.00)
2-Cu500 (4.50)500 (4.50)>2000 (18.00)>2000 (18.00)
3-Cu250 (2.00)500 (4.00)>2000 (16.00)>2000 (16.00)
1-Ag500 (17.50)>2000 (70.00)1000 (35.00)>2000 (70.00)
2-Ag125 (1.88)>2000 (30.00)500 (7.50)>2000 (30.00)
3-Ag1000 (10.00)>2000 (20.00)1000 (10.00)>2000 (20.00)
MaterialE. coli ATCC 25922P. aeruginosa ATCC 27853
MICMBCMICMBC
MSN2501000250500
1-Cu15.62 (0.20)15.62 (0.20)>2000 (26.00)>2000 (26.00)
2-Cu15.62 (0.14)15.62 (0.14)>2000 (18.00)>2000 (18.00)
3-Cu15.62 (0.12)31.25 (0.25)>2000 (16.00)>2000 (16.00)
1-Ag250 (8.75)500 (17.50)125 (4.38)1000 (35.00)
2-Ag250 (3.75)250 (3.75)125 (1.88)250 (3.75)
3-Ag250 (2.50)500 (5.00)250 (2.50)2000 (20.00)
Table
Table 4. MIC and MBC values of the final functionalized materials against two clinical multi-resistant strains of S. aureus (MRSA1 and MRSA2) and two clinical strains of P. aeruginosa (PA8 and PA13) in a planktonic state. Values in μg of material/mL and, in brackets, in μg metal/mL.
Table 4. MIC and MBC values of the final functionalized materials against two clinical multi-resistant strains of S. aureus (MRSA1 and MRSA2) and two clinical strains of P. aeruginosa (PA8 and PA13) in a planktonic state. Values in μg of material/mL and, in brackets, in μg metal/mL.
MaterialS. aureus MRSA1S. aureus MRSA2
MICMBCMICMBC
1-Cu>2000 (26.00)>2000 (26.00)>2000 (26.00)>2000 (26.00)
2-Cu>2000 (18.00)>2000 (18.00)>2000 (18.00)>2000 (18.00)
3-Cu>2000 (16.00)>2000 (16.00)>2000 (16.00)>2000 (16.00)
1-Ag1000 (35.00)2000 (70.00)2000 (70.00)>2000 (70.00)
2-Ag1000 (15.00)2000 (30.00)1000 (15.00)>2000 (30.00)
3-Ag1000 (10.00)2000 (20.00)1000 (10.00)2000 (20.00)
MaterialP. aeruginosa PA8P. aeruginosa PA13
MICMBCMICMBC
1-Ag62.5 (2.19)250 (8.75)31.25 (1.09)500 (17.50)
2-Ag62.5 (0.94)125 (1.88)31.25 (0.47)500 (7.50)
3-Ag62.5 (0.63)125 (1.25)31.25 (0.31)500 (5.00)
Table
Table 5. MIC and MBC values of 1-Ag@PTN against three different P. aeruginosa strains in a planktonic state. Data are given in µg/mL of material, and data in brackets refer to the µg/mL of silver.
Table 5. MIC and MBC values of 1-Ag@PTN against three different P. aeruginosa strains in a planktonic state. Data are given in µg/mL of material, and data in brackets refer to the µg/mL of silver.
MaterialATCC 27853PA8P. aeruginosa PA13
MICMBCMICMBCMICMBC
1-Ag@PTN15.625 (0.39)250 (6.25)15.625 (0.39)125 (3.13)15.625 (0.39)250 (6.25)
Table
Table 6. MBIC and MBEC values for silver materials against three different P. aeruginosa strains in biofilm state. Data are given in µg/mL of material, and data in brackets refer to the µg/mL of silver.
Table 6. MBIC and MBEC values for silver materials against three different P. aeruginosa strains in biofilm state. Data are given in µg/mL of material, and data in brackets refer to the µg/mL of silver.
MaterialATCC 27853PA8PA13
MBICMBECMBICMBECMBICMBEC
1-Ag250 (8.75)>1000 (35.00)500 (17.50)1000 (35.00)500 (17.50)>1000 (35.00)
1-Ag@PTN250 (6.25)>1000 (25.00)250 (6.25)1000 (25.00)1000 (25.00)>1000 (25.00)
2-Ag250 (3.75)>1000 (15.00)500 (7.50)1000 (15.00)500 (7.50)>1000 (15.00)
3-Ag500 (5.00)>1000 (10.00)500 (5.00)1000 (10.00)500 (5.00)>1000 (10.00)
Table
Table 7. Maximum ROS and AOPP production increases (%) obtained and the concentrations and incubation times required.
Table 7. Maximum ROS and AOPP production increases (%) obtained and the concentrations and incubation times required.
S. aureus
MaterialROSAOPP
Concentrationt (h)%Concentrationt (h)%
1-CuMIC/104195 ± 19MIC × 101705 ± 233
2-CuMIC4223 ± 22MIC × 101864 ± 186
3-CuMIC/104279 ± 29MIC × 101874 ± 198
E. coli
MaterialROSAOPP
Concentrationt (h)%Concentrationt (h)%
1-CuMIC489 ± 6MIC × 101390 ± 4
2-CuMIC/104209 ± 21MIC × 101647 ± 20
3-CuMIC × 104139 ± 8MIC × 101764 ± 1
Table
Table 8. Antibiotic susceptibility pattern of the clinical strains of S. aureus and P. aeruginosa studied in this work. Data are given in mg/L. S: susceptible; R: resistant; Pos: positive; Neg: negative.
Table 8. Antibiotic susceptibility pattern of the clinical strains of S. aureus and P. aeruginosa studied in this work. Data are given in mg/L. S: susceptible; R: resistant; Pos: positive; Neg: negative.
AntibioticS. aureusP. aeruginosa
MRSA1MRSA2PA8PA13
Amikacin--S (2)S (2)
Aztreonam--S (4)S (2)
Cefepime--S (1)R (16)
Cefoxitin detectionPosPos--
Ceftazidime--S (2)S (8)
Ceftolozane/Tazobactam--S (0.5)S (1)
Ciprofloxacin--S (≤0.25)R (≥4)
ClindamycinS (≤0.25)R (≥8)--
Colistin--S (≤0.5)S (≤0.5)
CotrimoxazoleS (≤10)S (20)--
DaptomycinS (0.25)S (0.25)--
ErythromycinR (≥8)R (≥8)--
FosfomycinS (≤8)S (32)--
Fusidic AcidS (≤0.5)S (≤0.5)--
GentamycinS (≤0.5)R (≥16)S (≤1)S(≤1)
Imipenem--S (1)S (1)
Inducible clindamycin resistanceNeg (≥8)Neg--
LevofloxacinR (≥8)R (≥8)--
LinezolidS (2)S (2)--
Meropenem----
Mupirocin-R (≥512)S (≤0.25)S (1)
OxacillinR (≥4)R (≥4)--
PenicillinR (≥0.5)R (≥0.5)--
Piperacillin-tazobactam----
TeicoplaninS (≤0.5)S (≤0.5)S (≤4)R (≥128)
TobramycinR (≥16)R (≥16)--
VancomycinS (1)S (≤0.5)S (≤1)S (≤1)
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Ugalde-Arbizu, M.; Aguilera-Correa, J.J.; San Sebastian, E.; Páez, P.L.; Nogales, E.; Esteban, J.; Gómez-Ruiz, S. Antibacterial Properties of Mesoporous Silica Nanoparticles Modified with Fluoroquinolones and Copper or Silver Species. Pharmaceuticals 2023, 16, 961. https://doi.org/10.3390/ph16070961

AMA Style

Ugalde-Arbizu M, Aguilera-Correa JJ, San Sebastian E, Páez PL, Nogales E, Esteban J, Gómez-Ruiz S. Antibacterial Properties of Mesoporous Silica Nanoparticles Modified with Fluoroquinolones and Copper or Silver Species. Pharmaceuticals. 2023; 16(7):961. https://doi.org/10.3390/ph16070961

Chicago/Turabian Style

Ugalde-Arbizu, Maider, John Jairo Aguilera-Correa, Eider San Sebastian, Paulina L. Páez, Estela Nogales, Jaime Esteban, and Santiago Gómez-Ruiz. 2023. "Antibacterial Properties of Mesoporous Silica Nanoparticles Modified with Fluoroquinolones and Copper or Silver Species" Pharmaceuticals 16, no. 7: 961. https://doi.org/10.3390/ph16070961

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop