Next Article in Journal
Synthesis of Epoxyisoindolinones via Microwave-Assisted Ugi-4CR/Intramolecular-Diels-Alder Reaction
Previous Article in Journal
Lactamomethylation of Phenols: Synthesis, In Silico Study of Reactivity and Possible Applications
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Proceeding Paper

On the Use of CeCl3.7H2O as a Catalyst for the Synthesis of Hydrazones Derived from Aromatic Aldehydes and Ketones †

by
Didier Farley Vargas
*,
Brenda S. Romero
,
Teodoro Saul Kaufman
and
Enrique Leandro Larghi
*
Instituto de Química Rosario IQUIR (CONICET-UNR), and Facultad de Ciencias Bioquímicas y Farmacéuticas, Universidad Nacional de Rosario (UNR), Suipacha 531, 2000 Rosario, Argentina
*
Authors to whom correspondence should be addressed.
Presented at the 24th International Electronic Conference on Synthetic Organic Chemistry, 15 November–15 December 2020; Available online: https://ecsoc-24.sciforum.net/.
Chem. Proc. 2021, 3(1), 82; https://doi.org/10.3390/ecsoc-24-08095
Published: 13 November 2020

Abstract

:
Hydrazonation of acetophenones and benzaldehydes under CeCl3 assistance was evaluated. The transformations entailed the use of the respective hydrazines (H2N–NH2.HCl, Me2N–NH2, or Ph2N–NH2.HCl) and CeCl3.7H2O (2–5 mol %). The use of different solvents in a model reaction between 3,4-dimethoxybenzaldehyde and N,N-dimethylhydrazine was studied.

1. Introduction

Hydrazones are a class of organic compounds with the structure R1R2C=N–NR3R4 (Figure 1). These prominent compounds have been widely used in the bioconjugation and functionalization of polymers, due to the ease of introducing these functions into biomolecules and probes [1]. Hydrazones have exerted a dominant influence in many other research areas as well. For example, these compounds have been used extensively in materials science for the synthesis of molecular switches [2], hydrogels [3], sensors, and fluorophores [4].
Other characteristics of the hydrazones are their diverse biomedical applications [5,6] and their utility as high-value synthetic intermediates in asymmetric synthesis [7], synthesis of N-heterocycles [8], and C–H activation [9]. Indeed, these types of scaffolds are key intermediaries in a variety of chemical transformations, and can be classified as versatile building blocks for organic synthesis. Therefore, the development of new synthetic approaches to such compounds is considered of high relevance.
On the other hand, the synthesis of hydrazones is mainly carried out by a reaction between hydrazine derivatives and aldehydes/ketones under the promotion of Brønsted acids [10,11] in a protic solvent, or through the use of a Dean–Stark trap [12,13], which usually requires long heating times. In particular, Lewis acids have been seldom employed for their preparation [14,15].
Recently, our group reported the use of oximes as synthetic intermediates for the total synthesis of natural isoquinolines [16,17,18]. The formation of these oximes was carried out through the use of CeCl3.7H2O as an efficient and eco-friendly promoter, as developed by Cortés et al. [19]. Against this background, we have studied CeCl3-assisted hydrazonation of acetophenones and benzaldehydes, in order to explore a new eco-friendly approach to this reaction (Scheme 1).

2. Results and Discussion

In the synthesis of 6-O-methyl anciscochine, an alkaloid isolated from Ancistrocladus tectorius, it was projected to use hydrazone 3 as a potential ortho-directing substrate in the C(sp2)-H activation reaction [13]. For the preparation of these compounds, 2,4-dimethoxyacetophenone (1) was subjected to hydrazonation with hydrazine hydrochloride 2a (H2N–NH2.HCl), N,N-dimethylhydrazine 2b (Me2N–NH2), and N,N-diphenylhydrazine hydrochloride 2c (Ph2N–NH2.HCl) in EtOH at reflux for 24 h, to provide good isolated yields (63–80%) of the expected hydrazones 3ac (Table 1, entries 1, 3, and 5).
In this same work, we were interested in evaluating the assistance of CeCl3·7H2O in these reactions (Table 1, entries 2, 4, and 6). Interestingly enough, application of the cerium(III)-assisted protocol to the preparation of the acetophenone hydrazones proved to be an unsuitable alternative, since hydrazones 3ac were obtained with lower yields of 20%, 15%, and 58%, respectively. This decrease in yield could be related to the hydrolytic instability of hydrazones derived from acetophenone with respect to the H2O molecules from the Ce(III) salt, as well as the assistance of CeCl3 in their hydrolysis [20].
On the other hand, E/Z geometric isomers of hydrazones 3ac were determined by 1H NMR analysis, and Nuclear Overhauser Effect (NOE) experiments on the hydrazones revealed signal enhancement between the protons of the methyl (3b) and o-phenyl (3c) substituents and H-6, suggesting a plausible Z-configuration for their major stereoisomers [21,22].
The unexpected geometry observed could be attributed to electronic factors of the substituents at both ends of the N‒N bond [17]. Therefore, in order to validate our hypothesis, a computational study of the conformations of the hydrazones was carried out. The conformational analysis of E and Z isomers of hydrazones 3ac revealed the most stable conformer; fully optimized structures of E and Z isomers are shown in Figure 2.
The lowest energy conformers presented a twisted geometry to avoid steric repulsions between the phenyl ring and the =N–NR2 group. In all three cases, the results of energy analysis showed that the Z isomers (i.e., the conformers with the lowest total energy resulting from the B3LYP/6-31G(d) calculations for the gas phase) are more stable than the corresponding lowest-energy E isomers.
The energy differences between the E and Z isomers found for hydrazones 3a and 3b were 1.58 and 29.62 kcal/mol, respectively. Nevertheless, for hydrazone 3c, the difference was smaller (0.45 kcal/mol). Thus, the density functional theory (DFT) calculations predicted a higher stability for the Z-isomers compared to the corresponding E-isomers, which is in agreement with the NOE experiments performed on acetophenone hydrazones 3ac [18].
On the other side, the performance of the reaction between 3,4-dimethoxy benzaldehyde (4) and N,N-dimethylhydrazine (2b) under CeCl3.7H2O-assistance (2 mol %) for the formation of N,N-dimethylhydrazone 5 was also evaluated (Table 2). The hydrazonation was carried out in different solvents at room temperature, affording (E)-5 with 14–97% yield after stirring for only 5 min [23,24].
In some cases, minor amounts of the starting material and the formation of acetals (6) as undesired products were detected (Table 2, entries 1–3) as an unfavorable effect of the solvent, related to its nucleophilicity and the possible assistance of cerium(III) in the acetalization reaction. For example, the diethyl acetal (R = Et) was isolated with a yield of 22% (Table 2, entry 2), and its structure was confirmed by 1H NMR analysis, where it exhibited a characteristic singlet corresponding to the methine hydrogen [-CH(OEt)] at δ = 5.42 ppm. Rewardingly, the best condition found for this transformation was when tert-butanol was employed as a solvent (Table 2, entry 4).
Furthermore, this protocol was tested for the formation of the N,N-dimethylhydrazone hydrazone of an acetophenone (Scheme 2). Initially, 3,4-dimethoxyacetophenone (7) was subjected to hydrazonation with N,N-dimethylhydrazine (2b) and CeCl3·7H2O (2 mol %) in methanol at room temperature for up to 24 h without showing product formation. After heating at 60 °C for 12 h, only 20% of N,N-dimethylhydrazone 8 was isolated; however, with the use of tert-butanol, the yield increased to 63%.
In general, the results suggest that this protocol could be an advantageous alternative for the formation of aldehyde hydrazones, while the preparation of acetophenone derivatives may require more drastic conditions and the use of specicific solvents like t-BuOH.

3. Experimental Section

3.1. General Experimental Details

The reactions were monitored by TLC, using silica gel GF254 plates supported on aluminum and run with different hexane–EtOAc solvent mixtures containing Et3N (1% v/v). The chromatographic spots were detected by exposure of the plates to 254 nm UV light, and by spraying with an ethanolic p-anisaldehyde/sulfuric acid reagent. The flash column chromatographies were run with silica gel 60 H (particle size < 55 μm), eluting with hexane–EtOAc mixtures under positive pressure, and employing gradient of solvent polarity techniques.
The nuclear magnetic resonance spectra were recorded on a Bruker Avance 300 NMR spectrometer at 300.13 (1H) and 75.48 (13C) MHz. CDCl3 was used as solvent, and the chemical shifts are informed in parts per million (ppm) in the δ scale. TMS was used as the internal standard (resonances of CHCl3 in CDCl3: δ 7.26 and 77.0 ppm for 1H and 13C NMR, respectively).

3.2. General Procedure for the Preparation of N,N-Dimethylhydrazones

A mixture of the corresponding carbonyl compound (0.2 mmol), N,N-dimethyl hydrazine (0.25 mmol) and CeCl3·7H2O (0.004 mmol) in tert-butanol (1 mL), was stirred or heated until complete consumption of the starting material was observed. The solvent was then evaporated and the residue was purified by column chromatography, in order to produce the corresponding N,N-dimethylhydrazones.

3.3. Computational Details

Initially, a conformational search was performed using the corresponding module of HyperChem v. 8.0 with the MM+ method. Then the selected structures were used as input geometries for the Gaussian-09 program package, and successively re-optimized by using the density functional theory (DFT) at the B3LYP/6-31G(d) level of theory. The selected geometries of these rotamers correspond to the energy minima in the gas state.

4. Conclusions

An efficient method for the preparation of N,N-dimethylhydrazones was developed. We have collected evidence on the assistance of CeCl3.7H2O in the hydrazonation of 3,4-dimethoxybenzaldehyde with N,N-dimethylhydrazine, which resulted in a shortened reaction time when compared with previous protocols. A visible solvent effect was observed during the preparation of N,N-dimethylhydrazones derived from benzaldehyde. On the other hand, this protocol was not so efficient when acetophenones like 3,4-dimethoxyacetophenone were reacted with N,N-dimethylhydrazine.

Acknowledgments

The authors gratefully acknowledge Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET, PUE IQUIR-2016) and the Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT, PICT 2018-01933, and PICT 2017-0149) for financial support. D.F.V. also thanks CONICET for his fellowship.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Data available on request.

References

  1. Kölmel, D.K.; Kool, E.T. Oximes and hydrazones in bioconjugation: Mechanism and catalysis. Chem. Rev. 2017, 117, 10358–10376. [Google Scholar] [CrossRef] [PubMed]
  2. Su, X.; Aprahamian, I. Hydrazone-based switches, metallo-assemblies and sensors. Chem. Soc. Rev. 2014, 43, 1963–1981. [Google Scholar] [CrossRef] [PubMed]
  3. Sharma, P.K.; Singh, Y. Glyoxylic hydrazone linkage-based PEG hydrogels for covalent entrapment and controlled delivery of doxorubicin. Biomacromolecules 2019, 20, 2174–2184. [Google Scholar] [CrossRef]
  4. Tatum, L.A.; Su, X.; Aprahamian, I. Simple hydrazone building blocks for complicated functional materials. Acc. Chem. Res. 2014, 47, 2141–2149. [Google Scholar] [CrossRef]
  5. Wahbeh, J.; Milkowski, S. The use of hydrazones for biomedical applications. SLAS Technol. Transl. Life Sci. Innov. 2019, 24, 161–168. [Google Scholar] [CrossRef] [PubMed]
  6. Verma, G.; Marella, A.; Shaquiquzzaman, M.; Akhtar, M.; Ali, M.R.; Alam, M.M. A review exploring biological activities of hydrazones. J. Pharm. Bioallied Sci. 2014, 6, 69–80. [Google Scholar] [CrossRef]
  7. De Gracia Retamosa, M.; Matador, E.; Monge, D.; Lassaletta, J.M.; Fernández, R. Hydrazones as singular reagents in asymmetric organocatalysis. Chem. Eur. J. 2016, 22, 13430–13445. [Google Scholar] [CrossRef]
  8. Groenendaal, B.; Ruijter, E.; Orru, R.V.A. 1-Azadienes in cycloaddition and multicomponent reactions towards N-heterocycles. Chem. Commun. 2008, 5474–5489. [Google Scholar] [CrossRef]
  9. Xu, X.; Zhang, J.; Xia, H.; Wu, J. C(sp2)–H functionalization of aldehyde-derived hydrazones via a radical process. Org. Biomol. Chem. 2018, 16, 1227–1241. [Google Scholar] [CrossRef]
  10. Mohamady, S.; Kralt, B.; Samwel, S.K.; Taylor, S.D. Efficient one-pot, two-component modular synthesis of 3,5-disubstituted pyrazoles. ACS Omega 2018, 3, 15566–15574. [Google Scholar] [CrossRef]
  11. Chuang, S.-C.; Gandeepan, P.; Cheng, C.-H. Synthesis of isoquinolines via Rh(III)-catalyzed C–H activation using hydrazone as a new oxidizing directing group. Org. Lett. 2013, 15, 5750–5753. [Google Scholar] [CrossRef] [PubMed]
  12. Motiwala, H.F.; Gülgeze, B.; Aubé, J. Copper-catalyzed oxaziridine-mediated oxidation of C–H bonds. J. Org. Chem. 2012, 77, 7005–7022. [Google Scholar] [CrossRef] [PubMed]
  13. Dabb, S.L.; Messerle, B.A. Rh(I) and Ir(I) catalysed intermolecular hydroamination with substituted hydrazines. Dalt. Trans. 2008, 6368–6371. [Google Scholar] [CrossRef] [PubMed]
  14. El-Azab, A.S.; Ghabbour, H.A.; El-Husseiny, W.M.; Maarouf, A.R.; Mohamed, M.A.; Abdel-Aziz, A.A.-M. Lewis acid-promoted direct synthesis of N-unsubstituted hydrazones via the reaction of hydrazine with acetophenone and isatin derivatives. Russ. J. Gen. Chem. 2016, 86, 2837–2844. [Google Scholar] [CrossRef]
  15. dos Santos Filho, J.M. Mild, Stereoselective, and highly efficient synthesis of n-acylhydrazones mediated by CeCl3·7H2O in a broad range of solvents. Eur. J. Org. Chem. 2014, 2014, 6411–6417. [Google Scholar] [CrossRef]
  16. Fonzo, S.; Vargas, D.F.; Kaufman, T.S. A ruthenium-catalyzed C–H activation strategy as an efficient shortcut in the total synthesis of 6,8-dimethoxy-1,3-dimethylisoquinoline. Synthesis 2019, 51, 3908–3914. [Google Scholar] [CrossRef]
  17. Cortés, I.; Borini Etichetti, C.M.; Girardini, J.E.; Kaufman, T.S.; Bracca, A.B.J. Total synthesis and cytotoxic activity of 6,8-dimethoxy-1,3-dimethylisoquinoline isolated from Ancistrocladus tectorius: A 6π-azaelectrocyclization approach. Synthesis 2019, 51, 433–440. [Google Scholar] [CrossRef]
  18. Vargas, D.F.; Romero, B.S.; Larghi, E.L.; Kaufman, T.S. Rhodium(III)-Catalyzed C–H Activation-Based First Total synthesis of 6-O-methyl anciscochine, an alkaloid isolated from Ancistrocladus tectorius. Synthesis 2020, 52, 119–126. [Google Scholar] [CrossRef]
  19. Cortés, I.; Kaufman, T.S.; Bracca, A.B.J. A convenient and eco-friendly cerium(III) chloride-catalysed synthesis of methoxime derivatives of aromatic aldehydes and ketones. R. Soc. Open Sci. 2018, 5, 180279. [Google Scholar] [CrossRef]
  20. Cadav, J.S.; Subba Reddy, B.V.; Reddy, M.S.K.; Sabitha, G. A facile cleavage of ketone N,N-dimethylhydrazones by CeCl3·7H2O-SiO2. Synlett 2001, 1134–1136. [Google Scholar] [CrossRef]
  21. Gergely, J.; Morgan, J.B.; Overman, L.E. Stereocontrolled synthesis of functionalized cis-cyclopentapyrazolidines by 1,3-dipolar cycloaddition reactions of azomethine imines. J. Org. Chem. 2006, 71, 9144–9152. [Google Scholar] [CrossRef]
  22. Vivona, N.; Frenna, V.; Buscemi, S.; Ruccia, M. Heterocyclic rearrangements. N,N-diphenylhydrazones, oximes and O-methyloximes of 3-benzoyl-5-phenyl-1,2,4-oxadiazole. J. Heterocyclic Chem. 1985, 22, 97–99. [Google Scholar] [CrossRef]
  23. Benassi, R.; Taddei, F. Theoretical study of conformational changes in simple hydrazones. J. Chem. Soc. Perkin Trans. 2 1985, 1629–1632. [Google Scholar] [CrossRef]
  24. Ros, A.; López-Rodríguez, R.; Estepa, B.; Álvarez, E.; Fernández, R.; Lassaletta, J.M. Hydrazone as the directing group for Ir-catalyzed arene diborylations and sequential functionalizations. J. Am. Chem. Soc. 2012, 134, 4573–4576. [Google Scholar] [CrossRef]
Figure 1. General structure and applications of hydrazones.
Figure 1. General structure and applications of hydrazones.
Chemproc 03 00082 g001
Scheme 1. CeCl3-assisted hydrazonation of acetophenones and benzaldehydes.
Scheme 1. CeCl3-assisted hydrazonation of acetophenones and benzaldehydes.
Chemproc 03 00082 sch001
Figure 2. Optimized geometrical structures and calculated total energies (Hartree) of hydrazones 3ac at the B3LYP/6-31G(d) level of theory.
Figure 2. Optimized geometrical structures and calculated total energies (Hartree) of hydrazones 3ac at the B3LYP/6-31G(d) level of theory.
Chemproc 03 00082 g002
Scheme 2. Preparation of acetophenone hydrazone 8.
Scheme 2. Preparation of acetophenone hydrazone 8.
Chemproc 03 00082 sch002
Table 1. Preparation of acetophenone-derived hydrazones (3ac).
Table 1. Preparation of acetophenone-derived hydrazones (3ac).
Chemproc 03 00082 i001
EntryR1R2Hydrazine (Equiv.)Additive (Equiv.)t (h)Yield (%)a
1HHH2NNH2.HCl (2.0)NaOAc (2.5)2474
2HHH2NNH2.HCl (2.0)NaOAc (2.5),
CeCl3.7H2O (0.05)
1220
3MeMeMe2NNH2 (2.5)AcOH (1.5)2463
4MeMeMe2NNH2 (2.5)CeCl3.7H2O (0.05)1215
5PhPhPh2NNH2.HCl (2.0)NaOAc (2.5)2480
6PhPhPh2NNH2.HCl (2.0)NaOAc (2.5),
CeCl3.7H2O (0.05)
1258
a These compounds were obtained as mixtures of E and Z isomers. T: time.
Table 2. Screening conditions for the formation of N,N-dimethylhydrazone (5).
Table 2. Screening conditions for the formation of N,N-dimethylhydrazone (5).
Chemproc 03 00082 i002
EntrySolvent5 (%)4 (%)Acetal (%)
1MeOH796traces
2EtOH71422
3i-PrOH8116traces
4t-BuOH9700
5THF14630
6MeCN31530
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Vargas, D.F.; Romero, B.S.; Kaufman, T.S.; Larghi, E.L. On the Use of CeCl3.7H2O as a Catalyst for the Synthesis of Hydrazones Derived from Aromatic Aldehydes and Ketones. Chem. Proc. 2021, 3, 82. https://doi.org/10.3390/ecsoc-24-08095

AMA Style

Vargas DF, Romero BS, Kaufman TS, Larghi EL. On the Use of CeCl3.7H2O as a Catalyst for the Synthesis of Hydrazones Derived from Aromatic Aldehydes and Ketones. Chemistry Proceedings. 2021; 3(1):82. https://doi.org/10.3390/ecsoc-24-08095

Chicago/Turabian Style

Vargas, Didier Farley, Brenda S. Romero, Teodoro Saul Kaufman, and Enrique Leandro Larghi. 2021. "On the Use of CeCl3.7H2O as a Catalyst for the Synthesis of Hydrazones Derived from Aromatic Aldehydes and Ketones" Chemistry Proceedings 3, no. 1: 82. https://doi.org/10.3390/ecsoc-24-08095

Article Metrics

Back to TopTop