Studies on Photocatalytic Degradation of Methylene Blue Using TiO2—Transition Metal Oxides Heterojunctions †
1
National Institute for Research & Development in Chemistry and Petrochemistry–ICECHIM, 202 Spl. Independentei, 060021 Bucharest, Romania
2
Faculty of Chemical Engineering and Biotechnology, National University of Sciences and Technologies “Politehnica” of Bucharest, 1-7 Gh. Polizu Str., 011061 Bucharest, Romania
*
Author to whom correspondence should be addressed.
†
Presented at the 19th International Symposium “Priorities of Chemistry for a Sustainable Development”, Bucharest, Romania, 11–13 October 2023.
Proceedings 2023, 90(1), 32; https://doi.org/10.3390/proceedings2023090032
Published: 13 December 2023
One of the sources of water pollution is the wastewater generated from the textile industry. This type of wastewater contains different organic dyestuffs. Methylene blue (MB) is one of the most widely used industrial dyes, with UV-Vis spectroscopic characteristics dominated by sharp and intense bands, which made it the most common dye used to test the performance of newly photocatalytic materials [1]. Residual water containing organic dyes discharged from textiles dyeing plants into natural water effluents are harmful and, through decomposition, are able to form highly toxic and carcinogenic compounds. Several techniques have been used for wastewater treatment in the past, including oxidation, anaerobic treatment, and filtration through the membranes, ultrafiltration, reverse osmosis and coagulation. But these methods convert dye pollutants into secondary pollutants that are not environmentally friendly [2]. This study presents an alternative method for decontamination using TiO2 photocatalysts with metal-oxide heterojunctions for application in the depollution of water effluents contaminated with textile dyes.
The nanoparticles developed in this study were based on hybrid photocatalysts based on TiO2 with transition metal-oxide heterojunctions, using cobalt, copper, cadmium and lead acetates, ferric chloride as metal oxide precursors and titanium dioxide. Reactions were performed using a Discover 2.0 Microwave Flow Reactor at a temperature of around 160 °C and at 300 W. The obtained samples underwent characterization using modern analytical methods to ensure that the photocatalysts possessed the desired properties. The photocatalytic properties of the synthesized materials were assessed by separately mixing the metal-oxide photocatalysts with a styrene–acrylic film-forming material [3]. The resulting materials were deposited onto glass plates and immersed in a vessel containing water contaminated with methylene blue dye. The reaction vessel was illuminated using a Xenon arc lamp, and degradation of the chromophore was monitored using UV-Vis absorption spectroscopy.
Characterization of the titanium dioxide photocatalysts doped with various transition metal oxides was performed via Scanning Electron Microscopy (SEM) and it was seen that morphology of the particles remain unchanged. Through Brunauer–Emmett–Teller (BET) analysis, it was observed that textural properties of the photocatalysts are relatively similar (pore diameters around 10 nm, and specific area of about 50 m2/g). Using UV-VIS diffuse reflectance measurements, it was determined that the smallest band gap was recorded in the case of TiO2/FeOOH photocatalyst. The obtained materials presented adequate properties and they showed good results regarding the photocatalytic activity.
The synthesized materials have the potential to be used in efficient water depollution process through photocatalytic methods.
Author Contributions
Conceptualization, V.R. and M.G.; methodology, V.R. and A.R.; validation, F.M.R.; formal analysis, F.M.R. and M.G.; investigation, M.G.; writing—review and editing, M.G. and V.R.; supervision, V.R. All authors have read and agreed to the published version of the manuscript.
Funding
The authors gratefully acknowledge the support of the Ministry of Research, Innovation and Digitization through Program 1-Development of the national research-development system, Subprogram 1.2-Institutional performance- Projects to finance excellence in RDI, Contract no. 15PFE/2021 and INCDCP-ICECHIM Core program PN 23.06.01.01 (AQUAMAT). The support provided by a grant of the Ministry of Research, Innovation and Digitization, CCCDI—UEFISCDI, project number PN-III-P2-2.1-PTE-2021-0309, within PNCDI III, is also gratefully acknowledged.
Institutional Review Board Statement
Not applicable.
Informed Consent Statement
Not applicable.
Data Availability Statement
The data are not publicly available due to containing information that could compromise the privacy of the research participants.
Conflicts of Interest
The authors declare no conflict of interest.
References
- Zeynep, K.; Bengü, Ö.U.; Önder, P.; Bedia, E. Efficient Photocatalytic Degradation of Methylene Blue Dye from Aqueous Solution with Cerium Oxide Nanoparticles and Graphene Oxide-Doped Polyacrylamide. ACS Omega 2023, 8, 13004–13015. [Google Scholar]
- Muhammad, A.; Sanya, K.; Rida, T.; Sirajuddin Young, S.M.; Ghayas, U.S. pH regulated rapid photocatalytic degradation of methylene blue dye via niobium-nitrogen co-doped titanium dioxide nanostructures under sunlight. Appl. Catal. A Gen. 2022, 643, 118764. [Google Scholar]
- Raditoiu, V.; Raditoiu, A.; Raduly, F.M.; Amariutei, V.; Gifu, C.; Anastasescu, M. Photocatalytic Behavior of Water-Based Styrene-Acrylic Coatings Containing TiO2 Sensitized with Metal-Phthalocyanine Tetracarboxylic Acids. Coatings 2017, 7, 229. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
MDPI and ACS Style
Grapin, M.; Raditoiu, V.; Raditoiu, A.; Raduly, F.M. Studies on Photocatalytic Degradation of Methylene Blue Using TiO2—Transition Metal Oxides Heterojunctions. Proceedings 2023, 90, 32. https://doi.org/10.3390/proceedings2023090032
AMA Style
Grapin M, Raditoiu V, Raditoiu A, Raduly FM. Studies on Photocatalytic Degradation of Methylene Blue Using TiO2—Transition Metal Oxides Heterojunctions. Proceedings. 2023; 90(1):32. https://doi.org/10.3390/proceedings2023090032
Chicago/Turabian StyleGrapin, Maria, Valentin Raditoiu, Alina Raditoiu, and Florentina Monica Raduly. 2023. "Studies on Photocatalytic Degradation of Methylene Blue Using TiO2—Transition Metal Oxides Heterojunctions" Proceedings 90, no. 1: 32. https://doi.org/10.3390/proceedings2023090032
