Special Issue “Digital and Sustainable Manufacturing in Industry 4.0”
1
Department of Mechanical, Chemical and Industrial Design Engineering, Universidad Politécnica de Madrid, Ronda de Valencia 3, 28012 Madrid, Spain
2
Engineering Research Institute of Aragón–I3A, Universidad de Zaragoza, María de Luna 3, 50018 Zaragoza, Spain
3
Department of Civil and Mechanical Engineering, Technical University of Denmark, Produktionstorvet Building 427A, 2800 Kongens Lyngby, Denmark
*
Author to whom correspondence should be addressed.
Appl. Sci. 2023, 13(20), 11384; https://doi.org/10.3390/app132011384
Submission received: 11 October 2023
/
Accepted: 12 October 2023
/
Published: 17 October 2023
(This article belongs to the Special Issue Digital and Sustainable Manufacturing in Industry 4.0)
The evolution from current to future factories is supported by research contributions in many cross-disciplinary fields, where digitalization and sustainability perspectives are present. Industry 4.0 represents a common framework in accelerated development where those contributions meet to lay the foundation of the coming factories and manufacturing systems [1]. This Special Issue invites novel and high-quality research contributions in a wide range of technologies in addition to papers focusing on the design and operation of manufacturing systems contributing to this evolution. Topics of the Special Issue include, but are not limited to, the following:
- Digitally enabled manufacturing technologies for mass production [4];
- Flexible routing/scheduling of manufacturing systems for minimum resource use [7];
- Twin green and digital transition technologies and applications [10];
- Circular engineering in the product life cycle [11];
- From lean to human-centered manufacturing science and innovation applications [12].
Manufacturing systems and their integration under triple-bottom-line sustainability criteria (economic, environmental, and social), as well as the research on individual isolated processes and technologies, fit the scope of this Special Issue. Links to factory job shops, including case studies presenting novel and relevant technical/scientific contributions, are welcome.
Conflicts of Interest
The authors declare no conflict of interest.
References
- Ghobakhloo, M. Industry 4.0, digitization, and opportunities for sustainability. J. Clean. Prod. 2020, 252, 119869. [Google Scholar] [CrossRef]
- Gil-Vilda, F.; Yagüe-Fabra, J.A.; Sunyer, A. From lean production to lean 4.0: A systematic literature review with a historical perspective. Appl. Sci. 2021, 11, 10318. [Google Scholar] [CrossRef]
- Tortorella, G.L.; Fogliatto, F.S.; Cauchick-Miguel, P.A.; Kurnia, S.; Jurburg, D. Integration of industry 4.0 technologies into total productive maintenance practices. Int. J. Prod. Econ. 2021, 240, 108224. [Google Scholar] [CrossRef]
- Zheng, T.; Ardolino, M.; Bacchetti, A.; Perona, M. The applications of Industry 4.0 technologies in manufacturing context: A systematic literature review. Int. J. Prod. Res. 2021, 59, 1922–1954. [Google Scholar] [CrossRef]
- Andronie, M.; Lăzăroiu, G.; Ștefănescu, R.; Uță, C.; Dijmărescu, I. Sustainable, smart, and sensing technologies for cyber-physical manufacturing systems: A systematic literature review. Sustainability 2021, 13, 5495. [Google Scholar] [CrossRef]
- Calvo, R.; Gil, P. Evaluation of collaborative robot sustainable integration in manufacturing assembly by using process time savings. Materials 2022, 15, 611. [Google Scholar] [CrossRef] [PubMed]
- Fathi, M.; Ghobakhloo, M. Enabling mass customization and manufacturing sustainability in industry 4.0 context: A novel heuristic algorithm for in-plant material supply optimization. Sustainability 2020, 12, 6669. [Google Scholar] [CrossRef]
- Catalucci, S.; Thompson, A.; Piano, S.; Branson, D.T., III; Leach, R. Optical metrology for digital manufacturing: A review. Int. J. Adv. Manuf. Technol. 2022, 120, 4271–4290. [Google Scholar] [CrossRef]
- Moshiri, M.; Pedersen, D.B.; Tosello, G.; Nadimpalli, V.K. Performance evaluation of in-situ near-infrared melt pool monitoring during laser powder bed fusion. Virtual Phys. Prototyp. 2023, 18, e2205387. [Google Scholar] [CrossRef]
- Leng, J.; Wang, D.; Shen, W.; Li, X.; Liu, Q.; Chen, X. Digital twins-based smart manufacturing system design in Industry 4.0: A review. J. Manuf. Syst. 2021, 60, 119–137. [Google Scholar] [CrossRef]
- Acerbi, F.; Taisch, M. A literature review on circular economy adoption in the manufacturing sector. J. Clean. Prod. 2020, 273, 123086. [Google Scholar] [CrossRef]
- Xu, X.; Lu, Y.; Vogel-Heuser, B.; Wang, L. Industry 4.0 and Industry 5.0—Inception, conception and perception. J. Manuf. Syst. 2021, 61, 530–535. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2023 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Share and Cite
MDPI and ACS Style
Calvo, R.; Yagüe-Fabra, J.A.; Tosello, G. Special Issue “Digital and Sustainable Manufacturing in Industry 4.0”. Appl. Sci. 2023, 13, 11384. https://doi.org/10.3390/app132011384
AMA Style
Calvo R, Yagüe-Fabra JA, Tosello G. Special Issue “Digital and Sustainable Manufacturing in Industry 4.0”. Applied Sciences. 2023; 13(20):11384. https://doi.org/10.3390/app132011384
Chicago/Turabian StyleCalvo, Roque, José A. Yagüe-Fabra, and Guido Tosello. 2023. "Special Issue “Digital and Sustainable Manufacturing in Industry 4.0”" Applied Sciences 13, no. 20: 11384. https://doi.org/10.3390/app132011384
Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.
