Next Article in Journal
Molecular Dynamics Study on the Adsorption and Modification Mechanism of Polymeric Sand-Fixing Agent
Next Article in Special Issue
Water−Processed Organic Solar Cell with Efficiency Exceeding 11%
Previous Article in Journal
Efficient OLEDs Based on Slot-Die-Coated Multicomponent Emissive Layer
Previous Article in Special Issue
Comparison and Optimization: Research on the Structure of the PET Bottle Bottom Based on the Finite Element Method
 
 
Review
Peer-Review Record

Advances in Polyethylene Terephthalate Beverage Bottle Optimization: A Mini Review

Polymers 2022, 14(16), 3364; https://doi.org/10.3390/polym14163364
by Shangjie Ge-Zhang 1,†, Huixin Liu 1,†, Mingbo Song 2, Yanzhi Wang 3, Hong Yang 1, Haobo Fan 4, Yuyang Ding 5 and Liqiang Mu 2,*
Reviewer 1:
Reviewer 2: Anonymous
Polymers 2022, 14(16), 3364; https://doi.org/10.3390/polym14163364
Submission received: 30 July 2022 / Revised: 6 August 2022 / Accepted: 8 August 2022 / Published: 17 August 2022
(This article belongs to the Special Issue Eco-Friendly Polymers: Synthesis, Characterization and Applications)

Round 1

Reviewer 1 Report

Comment for polymers-1867257 is listed as follows,

1. There are some miss been named or error typing in the pdf file of manuscripts.

(1) In the Keywords: please change the "Simulations" into the "Simulation".

(2) In the subsection 3.1. Temperature: please change the "Cossonet et al. [77]" into the "Cosson et al. [77]".

(3) In the subsection 3.2. Air Pressure: please change the "Kim et al. [80]" into the " Kim and Seol [80]".

(4) In the subsection 3.3. Others: please change the "Atigkaphan et al. [83]" into the " Atigkaphan and Thusneyapan [83]". Also please change the "Chung et al. [84]" into the "Chung [84] ", change the "Hadad et al. [85]" into the "Haddad et al. [85]".

(5) In the subsection 4.1. Single Optimization: please change the "Lontos et al. [88]" into the "Lontos and Gregoriou [88]".

(6) In the subsection 4.1.1. Single Manual Optimization: please change the "Demirel et al. [97,98]" into the "Demirel and Daver [97,98]".

(7) In the subsection 4.2. Manual-Automatic Double Optimization: please change the "Ge et al. [91]" into the "Ge-Zhang et al. [91]".

(8) In the Table 1: please check "- ~ " of the "UV transmittance - ~88%", check "- >" of the "oxygen transmission rate - > 99%", check "+" of the "Toughness + 85%", etc.

(9) In the Table 2: please check "- ~ " of the "8.10% - ~52%".

Author Response

Please see the attachment.

Author Response File: Author Response.pdf

Reviewer 2 Report

Yes, PET plastic is BPA free, but it is well known that PET  leaches antimony trioxide and phthalates which are dangerous to health. Antimony may contribute to cancer development, skin problems, menstrual and pregnancy issues, phthalates are endocrine disruptors. This problem has not been commented in review in detail though food safety is very important in PET application in food packaging. At present at the end of Introduction the struture of manuscript is briefly described, It would beneficial to clearly and more specify the objective of the review.

The big environmental problem that PET is not biodegradable and contains harmful substances. The statement in lines 78-80  needs citation and more comments because a lot of publications report harmful substances in PET. 

This review provides useful information regarding material optimization, process optimization and structure optimization.

Author Response

Please see the attachment.

Author Response File: Author Response.pdf

Round 2

Reviewer 1 Report

Comment for polymers-1867257-v2 is listed as follows,

1. There is one miss been named in the pdf file of manuscripts.

(1) In the section 2. Material Optimization: please change the "Kumartasli et al. [50]" into the "Kumartasli and Avinc [50]".

Author Response

Thank you for your careful review and quick reply! We have revised the error you pointed out in the article.


Page 3, Line 84:
"Kumartasli et al. [50]" → "Kumartasli and Avinc [50]".

 

Author Response File: Author Response.pdf

Back to TopTop