Next Article in Journal
Biomechanical Evaluation of Patient-Specific Polymethylmethacrylate Cranial Implants for Virtual Surgical Planning: An In-Vitro Study
Previous Article in Journal
Contribution to Understanding of Synergy between Red Mud and Common Supplementary Cementitious Materials
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Materials
Volume 15
Issue 5
10.3390/ma15051966
materials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Gelatin-Based Biofilms with FexOy-NPs Incorporated for Antioxidant and Antimicrobial Applications

by
Johar Amin Ahmed Abdullah
1,*,
Mercedes Jiménez-Rosado
1,
Antonio Guerrero
1 and
Alberto Romero
2
1
Departamento de Ingeniería Química, Escuela Politécnica Superior, Universidad de Sevilla, 41011 Sevilla, Spain
2
Departamento de Ingeniería Química, Facultad de Física, Universidad de Sevilla, 41012 Sevilla, Spain
*
Author to whom correspondence should be addressed.
Materials 2022, 15(5), 1966; https://doi.org/10.3390/ma15051966
Submission received: 2 February 2022 / Revised: 1 March 2022 / Accepted: 3 March 2022 / Published: 7 March 2022
(This article belongs to the Topic Scientific Advances in STEM: Synergies to Achieve Success, 2nd Volume)
Browse Figures
Review Reports Versions Notes

Abstract

:
Currently, gelatin-based films are regarded as promising alternatives to non-environmentally friendly plastic films for food packaging. Nevertheless, although they have great biodegradability, their weak mechanical properties and high solubility limit their applications. In this way, the use of nanoparticles, such as FexOy-NPs, could improve the properties of gelatin-based biofilms. Thus, the main objective of this work was to include different concentrations of FexOy-NPs (0.25 and 1.0%) manufactured by green synthesis (GS) and chemical synthesis (CS) into gelatin-based biofilms in order to improve their properties. The results show that FexOy-NPs can be distributed throughout the biofilm, although with a greater concentration on the upper surface. In addition, the incorporation of FexOy-NPs into the biofilms improves their physicochemical, mechanical, morphological, and biological properties. Thus, it is possible to achieve suitable gelatin-based biofilms, which can be used in several applications, such as functional packaging in the food industry, antioxidant and antimicrobial additives in biomedical and pharmaceutical biomaterials, and in agricultural pesticides.

1. Introduction

A film is a very thin (thickness < 1 mm), transparent, and, in many cases, stretchable plastic with different uses [1]. It is normally made of polyethylene (PE) or polypropylene (PP), which offers great flexibility, making it perfect for wrapping products of different shapes and sizes [2]. The most interesting properties of these films are their transparency (which allows one to see inside the package), their flexibility and adaptation to all kinds of shapes and sizes, and their impermeability, which prevents the passage of air and moisture, acting as a barrier and protecting the interior [3]. These properties are very important in the food industry, as they help to extend the shelf life of food by preventing oxidation–reduction reactions and interaction with microbes [4].
In recent years, the film sector has been affected by an increase in demand due to two fundamental factors: the need for safety in the transport of products, thereby increasing the need for wrapping the merchandise, and the current trend towards better presented products, which has considerably increased the use of films as an element with hygienic and aesthetic characteristics [5]. Nevertheless, the low biodegradability of these packaging materials is generating a great pollution problem, being unsuitable for the food industry. In this way, natural biopolymer-based films are currently being investigated, such as those made of gelatin, chitosan, cellulose, or cellulose derivatives, which confer them good biodegradability without releasing toxic substances [6,7]. Among the raw materials, gelatin has great potential to be used in diverse industrial applications: (1) in the food industry, to protect food from certain factors such as drying, light, and oxidation, since it may be used in biofilms to incorporate a wide range of additives, including antioxidants, antimicrobials, antifungals, nutrients, and flavorings [8]; (2) in the cosmetics sector, e.g., in hair gels, shampoos, and other cosmetic products [9,10,11,12]; (3) in the biomedical sector, for intrinsic activities like antidiabetic, antihypertensive, anticancer, antimicrobial, and antioxidant activities, as well as in wound care and healing, tissue engineering, and gene therapy [13,14]; (4) in the pharmaceutical industry and medication delivery, e.g., as a gelling agent for plasma expanders, to manufacture soft and hard gelatin capsule shells, microencapsulation of pharmaceuticals and oils, emulsion stabilization, medicated sponges, scaffoldings, creams and gels, wound care, slow-release, and vaccinations [15,16]; (5) in the photography sector, as a protective coating that extends the life of photographs [12,17]; and (6) other applications such as paints and fertilizers [10]. All this is possible due to the fact that gelatin presents easy processability to form films, high flexibility, suitable gas barrier properties, high availability, and low cost [18,19]. Nevertheless, the greatest problem of gelatin-based biofilms is their high water solubility and vapor permeability, along with weak thermal and mechanical strength [20,21]. Many strategies have been suggested to overcome these problems. However, the most important strategy is the incorporation of nanomaterials as reinforcing fillers [22]. In this way, a variety of metal oxide nanoparticles, nanocellulose, and nanoclays have been incorporated into gelatin-based biofilms, such as zinc oxide nanoparticles [23], gelatin–silver NP antimicrobial composite films [24], titanium dioxide (TiO2-NPs) [25], gelatin biofilms reinforced with chitosan-NPs [26], montmorillonite [27], chitin NPs [28], and magnetic iron oxide NPs [29]. These nano-sized composites have been used for the manufacture of gelatin-based nanocomposite biofilms. In this sense, researchers are focusing their efforts on discovering alternatives to antibiotic feed additives that do not compromise productivity, since the usage of antibiotic feed additives has been a subject of increasing concern. Nanoparticles have recently been used to replace the high-cost organic source [30].
Furthermore, iron oxide nanoparticles (FexOy-NPs) have been widely used in biomedical applications due to their particular, unique, and magnetic characteristics, as well as their acceptable biocompatibility and bioavailability [31]. FexOy-NPs have a high inhibition capacity against the growth of different foodborne pathogens, such as Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa [32]. These NPs have proven to be capable of killing bacteria by producing reactive oxygen species (•OH, •O2−), damaging bacterial DNA and proteins, leading to impaired mitochondrial function while keeping non-bacterial cells unharmed [2,18,20]. It is worth mentioning that FexOy-NPs are nonhazardous and non-cytotoxic at concentrations lower than 0.1 mg/mL [33]. Additionally, Faria et al. reported the oral therapeutic potential of iron oxide NPs to treat iron deficiency anemia [34]. In this context, FexOy-NPs are considered a suitable additive to incorporate into films and improve their antimicrobial activity.
FexOy-NPs can be synthesized by chemical or green approaches, which produce different characteristics. Chemically synthesized FexOy-NPs are more hazardous and have a higher tendency to agglomerate and to show lower stability. As a result of the introduction of green nanotechnology, researchers are focusing more on environmentally beneficial green or biological methods of producing FexOy-NPs. Thus, the nanoparticles synthesized by green methods are smaller, less agglomerated, more stable, and less toxic than those synthesized by chemical methods [35,36]. In addition, the green synthesis of these NPs can improve their purity and functional properties due to the high presence of active groups coming from polyphenols, which are used for their synthesis.
In this way, the main objective of this work was to develop gelatin-based biofilms with different concentrations of FexOy-NPs (0.25 and 1.0%). Green (GS) and chemical (CS) FexOy-NPs were used to compare their influence on the biofilm properties. To this end, the physicochemical, mechanical, microstructural, and functional properties of the different biofilms were evaluated.

2. Materials and Methods

2.1. Materials

The gelatin protein used in this study was food gelatin type B 200/220 g blooms supplied by Manuel Riesgo, S.A. (Madrid, Spain), being a food gelatin that contains sulfur dioxide (<10 ppm). Gallic acid (C7H6O5) and DPPH (2,2-diphenyl-1-picrylhydrazyl) were purchased from Sigma Aldrich (Darmstadt, Germany). All the reagents were of analytical grade.
FexOy-NPs were synthesized according to a previous work with slight modifications [37]. Briefly, it consists of colloidal precipitation in which 20 mL of Phoenix dactylifera L. extract, which is rich in polyphenols (green) or NaOH (chemical) (used as reductors) were mixed with 20 mL of FeCl3·6H2O (used as a precursor). The resulting 40 mL of mixture was heated under continuous stirring for 2 h at 50 °C. Then, the obtained precipitate was filtered, washed, and dried in an oven for 8 h at 100 °C. Finally, they were calcinated in a muffle for 5 h at 500 °C.
CS FexOy-NPs had a mean size of 49 ± 2 nm, a 2.20 Fe2O3:Fe3O4 ratio, and 47% crystallinity. GS FexOy-NPs had a mean size of 32 ± 1 nm, a 0.84 Fe2O3:Fe3O4 ratio, and 69% crystallinity.

2.2. Biofilm Processing Method

Biofilms were fabricated by the casting procedure [3]. To this end, gelatin was firstly dissolved in distilled water (2% w/v), subjecting it to magnetic stirring for 2 h at 60 °C and 600 rpm. Subsequently, different concentrations of FexOy-NPs (0.25 and 1.0% w/w) with respect to the initial gelatin were dispersed in the solutions by ultrasound for 0.25 h. Finally, a constant volume (42.7 mL) of the solution was cast into Teflon plates (7.6 cm of diameter) and dried at room conditions (22 ± 1 °C and 35 ± 1% RH) for 3 days. The biofilms were peeled off and kept in a desiccator for further characterization. A reference biofilm was manufactured without the dispersion of NPs. Figure 1 shows a scheme of the different steps of this process.

2.3. Physicochemical Properties

2.3.1. Water Solubility

For the determination of this parameter, the samples (2 × 2 cm2) were firstly weighted (Wi) and then placed in an oven at 105 °C for 24 h. Later, the samples were immersed in 50 mL of distilled water for 24 h. Finally, the films were taken out and redried at 105 °C for 24 h to obtain the final dry weight (Wf). The weight loss or water solubility percentage (WS%) was calculated with Equation (1) [26,29]:
W S ( % ) = w i − w f w i · 100

2.3.2. Optical Properties

Another essential property of biofilms is their transparency, which restricts light transmission while allowing visibility through the packaging material. To determine this property, UV–vis spectroscopy was used. Thus, 1 × 2 cm2 samples were measured in a UV–vis spectrophotometer (Model 8451A, Hewlett Packard Co., Santa Clara, CA, USA) at 600 nm. A blank was carried out with air [24,38]. The results were indicated as transmittance (amount of light that can pass through the system).

2.4. Mechanical Properties

Static tensile tests were performed in order to evaluate the mechanical properties of the biofilms. For this, a modification of the ISO 527-3:2019 standard [39] was used. The samples were subjected to an increasing axial force at a speed of 10 mm/min until break in an MTS Insight 10 Universal Testing Machine (Berlin, Germany). During these tests, temperature and relative humidity were constant at 22 ± 1 °C and 35 ± 1%, respectively. The maximum stress (σmax), strain at break (εmax), and Young’s modulus of each biofilm were analyzed.

2.5. Morphological Properties

2.5.1. Scanning Electron Microscopy (SEM)

Scanning electron microscopy (SEM) was used to determine the microstructure of the samples. The biofilms were analyzed on both sides (bottom and upper surfaces). In addition, their thickness was measured using ImageJ software. The samples were firstly covered with a thin gold layer to improve their conductivity and, thus, the quality of the micrographs. Later, they were observed in a Zeiss EVO microscope (Pleasanton, CA, USA) with an acceleration voltage of 10 kV and magnification of 3 KX [40].

2.5.2. Energy Dispersive X-ray Spectroscopy (EDX)

The elemental composition distribution of the biofilms was also evaluated. For this, a EDX detector was attached to an SEM microscope [41]. In this way, the Fe distribution was analyzed in both surfaces of each biofilm through mapping (by converting to 8-bit grayscale and then Auto Threshold, where the obtained percentage was representative of the color area of Fe).

2.6. Functional Properties

2.6.1. Antioxidant Activity

Antioxidant activity of the biofilms was determined using the protocol described by Mehmood et al. (2020) with slight modifications [29]. Thus, 1 mL of film solution was mixed with 1 mL of DPPH solution dissolved in methanol (40 ppm). This mixture was kept in the dark for 30 min at 25 °C. Finally, the absorbance of each solution was read at 517 nm in a spectrophotometer. Gallic acid was used as the positive control. DPPH inhibition (IP) was calculated using Equation (2).
I P   ( % ) = ( A − B A ) × 100
where A and B are the DPPH absorbance without and with antioxidant agent, respectively.

2.6.2. Antimicrobial Activity

The antimicrobial activity of the different biofilms was evaluated using an agar diffusion experiment [29]. In this way, cylindrical biofilms (9 mm of diameter) were firstly sterilized by immersion in 96% (v/v) ethanol for 2 min, after which they were rinsed thrice with sterile phosphate buffered saline (PBS). Then, they were placed in agar gels inoculated with Staphylococcus aureus (S. au) and Escherichia coli (E. col). The antibacterial activity was determined as the inhibition zone (diameters) surrounding the biofilm after 24, 48, and 72 h of incubation at 37 °C using ImageJ software.

2.7. Statistical Analysis

At least 3 replicates of each sample were performed for each measurement. The results were presented as mean values with standard deviations, which were calculated using IBM SPSS statistic software. In addition, the significant differences were evaluated using a one-way ANOVA with 95% confidence level (p < 0.05).

3. Results

3.1. Physicochemical Properties

3.1.1. Water Solubility

Water solubility (WS) is a critical parameter for food packaging applications. In this sense, biofilms must be insoluble in water to improve water resistance and product safety [26,29]. Table 1 shows the water solubility (WS) values of the different biofilms. As can be seen, the reference biofilm (neat gelatin) reached the highest WS value (80.9%). Higher WS of neat gelatin biofilms was due to the hydrophilic nature of gelatin [42]. Thus, the incorporation of FexOy-NPs into the system improved its water resistance. Nevertheless, the increment in the FexOy-NP concentration did not significantly improve their water resistance. Therefore, it could be concluded that the incorporation of NPs could decrease the solubility in water, regardless of the incorporated concentration. These results could be due to the formation of strong hydrogen bonds between the biopolymer chains and NPs, as has already been reported in previous works [42]. Likewise, Wongphan et al. (2022) reported that the incorporation of enzymes into polymers could cause an interaction via hydrogen bonding that enhances the hydrophobic groups by reducing the contrast, which results in a decrease in the solubility [43]. These results are similar for GS and CS NPs.

3.1.2. Optical Properties

The transmittance of each biofilm is also presented in Table 1. The reference system (neat gelatin) had 60% transmittance, which showed the great transparency of these biofilms. The incorporation of FexOy-NPs into gelatin-based biofilms reduced the transmittance values of the systems. Thus, this decrease was noted linearly with the increase of FexOy-NP concentration. Moreover, GS NPs led to a lower reduction than CS NPs, although this difference vanished at the highest NP content. The decrease in transparency brought about by NPs could be associated with the increase in solid material, which hindered the mobility of the biopolymer chains. Thus, the dispersion of fillers filled up free space preventing the passage of the light through it. Similar results were obtained in other works with gelatin-based biofilms containing silver or magnetic iron oxide NPs [24,29,44,45].

3.2. Mechanical Properties

Figure 2 shows the tensile profile of the different biofilms. As can be observed, the neat gelatin system presented a short elastic zone followed by a plastic one. This plastic zone decreased as the amount of FexOy-NPs in the biofilm increased. The comparison of the different systems is better defined through the mechanical parameters shown in Table 1. In this way, the addition of the FexOy-NPs generated an increase in Young’s modulus and maximum stress (σmax), being more pronounced in GS FexOy-NPs than in CS FexOy-NPs. This result is due to the fact that the presence of immiscible particles caused non-homogeneous networks and reduced extensibility of the films [45]. In contrast, no significant differences were found between the incorporated GS and CS-NPs at the same concentration for the strain at break (εmax) of the different films studied. Thus, the incorporation of FexOy-NPs stiffened the biofilms, probably due to the increasing presence of solid material in the biofilms and the increase of their thickness [29]. The incorporation of GS and CS-NPs may reduce the cohesion between the polymer chains and result in the reduction of strain at break [46]. On the other hand, the GS FexOy-NPs achieved greater maximum stress and Young’s modulus than the CS FexOy-NPs. This result could be due to the size of the NPs. In this way, smaller NPs generated a better interconnection in the structure, which highlighted this effect [47]. Thus, the incorporation of NPs always improved the mechanical resistance of the biofilms due to the strong network between NPs and biopolymer chains.
Nevertheless, the increase in NP concentration showed much lower effects as compared to their mere incorporation. Thus, no significant increase in Young’s modulus could be observed for either of the two types of NPs, while the effect on σ max depended on the NPs used. The maximum stress was reduced when increasing GS NP content or increased when CS was used. These contradictory results could be attributed to the occurrence of two opposite effects. On one hand, an increase in NPs may induce an enhancement of the mechanical properties of the biofilms by promoting NP–protein hydrogen bonding. On the other hand, it may also favor NP agglomeration, which may interfere with the formation of these NP–protein domain arrangements [29]. Likewise, aggregation of nanoparticles in biodegradable polymers was possible with increasing nanofiller concentrations, which may lead to changes in the mechanical and barrier properties of the films [48].

3.3. Morphological Properties

3.3.1. Scanning Electron Microscopy (SEM)

Figure 3 shows the bottom and upper surface of the different biofilms. As can be seen, the biofilm without NP incorporation (neat gelatin) presented a smooth and homogeneous structure on both surfaces. On the other hand, the incorporation of NPs generated rough surfaces with fissures and holes. Thus, the incorporation of NPs seemed to alter the nanostructure of biofilms, being more evident in the case of green nanoparticles (GS FexOy-NPs). This effect could be due to the functional groups present in GS FexOy-NPs (as they come from the polyphenols used in their synthesis), which could alter the structure of the biopolymer chains in the biofilms by charge interaction [49]. Furthermore, FexOy-NPs seemed to form more aggregates, probably due to the increase in concentration [48]. This effect was more evident in CS FexOy-NPs among films, which may be due to the non-availability of stabilizing agents [32].

3.3.2. Energy Dispersive X-ray Spectroscopy (EDX)

EDX mapping confirmed the purity of biofilms and the synthesized NPs, since only the elemental components of proteins (C, H, N, O) and NPs (Fe, O) were present in the analyses. On the other hand, the distribution of Fe in the biofilms was evaluated through the Fe distribution found in the EDX analyses. Figure 4 shows this distribution in both surfaces (bottom and upper). Nevertheless, the colored area in each image was calculated to improve the comparison between the systems (Table 2). As can be seen, there was a homogeneous distribution of NPs in both surfaces of the biofilms, since Fe could be observed in the whole images. Nevertheless, there was a higher NP concentration on the upper surface than on the bottom surface, being more evident in the higher NP percentage (1%). This behavior can be explained by the hydrophobicity of the NPs, which made them migrate to the surface where they presented less steric repulsion, as well as by their density, which made them float instead of sinking into the film solution [50]. Additionally, this was explained by the strengthened Van Der Waals forces as particle size and concentration increased or that larger particles would exhibit higher surface tension, causing them to settle on the surface [50]. On the other hand, a higher predisposition to the agglomerations or aggregations of NPs could be observed at higher NP concentrations, causing them to fall by gravity. Among the different NPs, CS NPs presented greater precipitate than GS NPs, possibly due to their larger size. In addition, the highest concentration of CS FexOy-NPs showed agglomeration of NPs in certain areas of the biofilm. This behavior was already reported by Rufus et al. (2017) and Hosseini et al. (2015), who attributed it to an entropic process [26,36].

3.4. Functional Properties

3.4.1. Antioxidant Activity

As can be seen in Table 1, the incorporation of FexOy-NPs produced an increase in antioxidant activity. In addition, the higher the FexOy-NP concentration, the higher the antioxidant activity. Thus, these nanoparticles act as antioxidants, as was reported in similar articles [29,51]. Regarding the different nanoparticles, the GS FexOy-NPs presented higher DPPH inhibition than the CS FexOy-NPs. This behavior could be due to the greater amount of antioxidant groups in them, conferred during their synthesis by polyphenols. In this way, green synthesis did not only display advantages in the synthesis process by reducing toxic waste and lowering costs, but it also allowed the generation of nanoparticles that provided greater functionality in future applications. These results showed that the gelatin-based FexOy-NPs displayed higher antioxidant activity than others reported in the literature, such as those obtained by Zafar et al. (2020) using iron oxide nanoparticles (IONPs) [29], and Shiv et al. (2019) using melanin nanoparticles [7]. It is worth being mentioned that the IP% of the positive control (gallic acid) was from 94.9 to 98.4%.

3.4.2. Antibacterial Activity

The inhibition area produced by the different biofilms is collected in Table 3 through its significant measure (diameter). An image of these inhibition areas can be observed in the supplementary materials. As can be seen, the neat gelatin biofilms showed antibacterial activity against Staphylococcus aureus, since a small zone of inhibition could be observed for the first 24 h. This could be due to the presence of sulfur dioxide (<10 ppm), as it is food gelatin. Nevertheless, this effect was lost in time when the bacteria grew. In this way, neat gelatin only had the ability to act on the peptidoglycan layer of bacteria to generate their lysis. However, it did not show the ability to act on the lipid layer, thus it only affected gram-positive bacteria and not gram-negative bacteria [52]. The inclusion of FexOy-NPs improved the antibacterial activity of biofilms. In this way, higher inhibition areas could be observed, as well as an effect on both types of bacteria. Nevertheless, although the difference in nanoparticle concentration on each of the surfaces of the biofilms was different, the antibacterial activity did not seem to have significant differences on each of the surfaces, making it a fully functional material. Regarding the synthesis of NPs, the GS FexOy-NPs presented higher antibacterial activity than the CS FexOy-NPs. This could be due to the smaller size of the green NPs, which conferred the biofilms a better capacity to inhibit the replication of bacterial DNA [53,54], as well as the higher crystallinity shown by GS FexOy-NPs [30]. Higher crystallinity allowed the released of Fe+2/Fe+3 to collide with the negatively charged membranes of bacteria, destroying their protein structure and causing them to die [55]. The incorporated antimicrobial function into biopolymer films could be an efficient method to enhance the shelf-life extension capacity for biodegradable films [56]. On the other hand, all the samples showed a decrease in their inhibitory capacity over time, being more notable in CS FexOy-NPs.

4. Conclusions

The incorporation of FexOy nanoparticles into gelatin-based biofilms improved their properties even at a low concentration. Thus, the 0.25% (w/w) led to a reduction in the water solubility and to an improvement in the antioxidant activity and mechanical properties. An increase in NPs concentration led to opaquer or less transparent biofilms with greater thickness, but not to a significant improvement in the other properties evaluated, which may be due to the tendency of the nanoparticles to agglomerate at higher concentrations caused by their hydrophobic nature. Therefore, their inclusion reduced the water solubility of the biofilms and improved their mechanical resistance and functional properties. Furthermore, the dispersion of the nanoparticles incorporated by the casting method led to their heterogeneous distribution with differences in the distribution in both upper and bottom surfaces of the biofilms. However, these differences did not alter the antibacterial properties.
Finally, the green nanoparticles (GS FexOy-NPs) showed better antioxidant and antibacterial activities than the CS FexOy-NPs, which must improve the added value of these biofilms. This antioxidant activity of (GS FexOy-NPs) highlighted high antioxidant activity (PI% = 84.7% compared to gallic acid as a standard with PI% = 96.65). A control on the distribution of the nanoparticles in the biofilms and the use of the green nanoparticles led to sustainable biofilms with a significant improvement of the functional properties. All this makes these biofilms highly applicable for use as functional packaging to preserve food, antioxidant and antimicrobial additives in multiple applications such as biomedical and pharmaceutical biomaterials, as well as in agricultural pesticides. Nevertheless, further characterization of these biopolymer films, including a biodegradability study, will be required in future works as a previous stage to their use in packaging applications.

Supplementary Materials

The following are available online at https://www.mdpi.com/article/10.3390/ma15051966/s1. Figure S1: Image of inhibition area over time of neat gelatin-based biofilm without FexOy-NPs incorporated. Figure S2: Image of inhibition area over time of gelatin-based biofilm with 1.0% GS FexOy-NPs incorporated. Figure S3: Image of inhibition area over time of gelatin-based biofilm with 1.0% CS FexOy-NPs incorporated.

Author Contributions

Conceptualization, J.A.A.A., A.R. and A.G.; methodology, J.A.A.A. and M.J.-R.; software, J.A.A.A.; validation, J.A.A.A. and A.R.; formal analysis, M.J.-R.; investigation, J.A.A.A. and M.J.-R.; resources, A.G.; data curation, J.A.A.A.; writing—original draft preparation, J.A.A.A. and M.J.-R.; writing—review and editing, A.R. and A.G.; visualization, A.R. and A.G.; supervision, A.R. and A.G.; project administration, A.G.; funding acquisition, A.G. All authors have read and agreed to the published version of the manuscript.

Funding

Grant RTI2018-097100-B-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

The data presented in this study are available upon request from the corresponding author.

Acknowledgments

The authors acknowledge the MCI/AEI/FEDER, EU project (Ref. RTI2018-097100-B-C21) that supports this work. In addition, the authors thank the predoctoral grant from Johar Amin Ahmed Abdullah (Universidad de Sevilla, CODE 810) and Mercedes Jiménez-Rosado (Ministerio de Educación y Formación Profesional, FPU2017/01718). The authors also thank CITIUS for granting access to and their assistance with the DRX area characterization and microscopy services.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. AL-Assadi, Z.I.; AL-Assadi, F.I. Enhancing the aesthetic aspect of the solar systems used as facades for building by designing multi-layer optical coatings. Tech. Rom. J. Appl. Sci. Technol. 2021, 3, 1–10. [Google Scholar] [CrossRef]
  2. Glaser, T.K.; Plohl, O.; Vesel, A.; Ajdnik, U.; Ulrih, N.P.; Hrnčič, M.K.; Bren, U.; Zemljič, L.F. Functionalization of polyethylene (PE) and polypropylene (PP) material using chitosan nanoparticles with incorporated resveratrol as potential active packaging. Materials 2019, 12, 2118. [Google Scholar] [CrossRef] [Green Version]
  3. Roy, S.; Rhim, J.-W.W. Gelatin-Based Film Integrated with Copper Sulfide Nanoparticles for Active Packaging Applications. Appl. Sci. 2021, 11, 6307. [Google Scholar] [CrossRef]
  4. Nur Hanani, Z.A.; Roos, Y.H.; Kerry, J.P. Use and application of gelatin as potential biodegradable packaging materials for food products. Int. J. Biol. Macromol. 2014, 71, 94–102. [Google Scholar] [CrossRef]
  5. Zhang, X.-L.; Zhao, Y.-Y.; Zhang, X.-T.; Shi, X.-P.; Shi, X.-Y.; Li, F.-M. Re-used mulching of plastic film is more profitable and environmentally friendly than new mulching. Soil Tillage Res. 2022, 216, 105256. [Google Scholar] [CrossRef]
  6. Samsi, M.S.; Kamari, A.; Din, S.M.; Lazar, G. Synthesis, characterization and application of gelatin–carboxymethyl cellulose blend films for preservation of cherry tomatoes and grapes. J. Food Sci. Technol. 2019, 56, 3099–3108. [Google Scholar] [CrossRef]
  7. Shankar, S.; Wang, L.-F.; Rhim, J. Effect of melanin nanoparticles on the mechanical, water vapor barrier, and antioxidant properties of gelatin-based films for food packaging application. Food Packag. Shelf Life 2019, 21, 100363. [Google Scholar] [CrossRef]
  8. Etxabide, A.; Uranga, J.; Guerrero, P.; de la Caba, K. Development of active gelatin films by means of valorisation of food processing waste: A review. Food Hydrocoll. 2017, 68, 192–198. [Google Scholar] [CrossRef]
  9. Abd Elgadir, M.; Mirghani, M.E.S.; Adam, A. Fish gelatin and its applications in selected pharmaceutical aspects as alternative source to pork gelatin. J. Food Agric. Environ. 2013, 11, 73–79. [Google Scholar]
  10. Rawdkuen, S.; Thitipramote, N.; Benjakul, S. Preparation and functional characterisation of fish skin gelatin and comparison with commercial gelatin. Int. J. Food Sci. Technol. 2013, 48, 1093–1102. [Google Scholar] [CrossRef]
  11. Gómez-Guillén, M.C.; Pérez-Mateos, M.; Gómez-Estaca, J.; López-Caballero, E.; Giménez, B.; Montero, P. Fish gelatin: A renewable material for developing active biodegradable films. Trends Food Sci. Technol. 2009, 20, 3–16. [Google Scholar] [CrossRef] [Green Version]
  12. Da Trindade Alfaro, A.; Balbinot, E.; Weber, C.I.; Tonial, I.B.; Machado-Lunkes, A. Fish Gelatin: Characteristics, Functional Properties, Applications and Future Potentials. Food Eng. Rev. 2015, 7, 33–44. [Google Scholar] [CrossRef]
  13. Kim, S.-K.; Ngo, D.-H.; Vo, T.-S. Marine Fish-Derived Bioactive Peptides as Potential Antihypertensive Agents. Adv. Food Nutr. Res. 2012, 65, 249–260. [Google Scholar] [PubMed]
  14. Gudipati, V. Fish Gelatin: A Versatile Ingredient for the Food and Pharmaceutical Industries. In Marine Proteins and Peptides; John Wiley & Sons, Ltd.: Chichester, UK, 2013; pp. 271–295. [Google Scholar]
  15. Jeevithan, E.; Qingbo, Z.; Bao, B.; Wu, W. Biomedical and Pharmaceutical Application of Fish Collagen and Gelatin: A Review. J. Nutr. Ther. 2013, 2, 218–227. [Google Scholar] [CrossRef]
  16. Liu, L.S.; Liu, C.K.; Fishman, M.L.; Hicks, K.B. Composite films from pectin and fish skin gelatin or soybean flour protein. J. Agric. Food Chem. 2007, 55, 2349–2355. [Google Scholar] [CrossRef]
  17. Jamilah, B.; Harvinder, K.G. Properties of gelatins from skins of fish—Black tilapia (Oreochromis mossambicus) and red tilapia (Oreochromis nilotica). Food Chem. 2002, 77, 81–84. [Google Scholar] [CrossRef]
  18. Shiao, W.C.; Wu, T.C.; Kuo, C.H.; Tsai, Y.H.; Tsai, M.L.; Hong, Y.H.; Huang, C.Y. Physicochemical and antioxidant properties of gelatin and gelatin hydrolysates obtained from extrusion-pretreated fish (Oreochromis sp.) scales. Mar. Drugs 2021, 19, 275. [Google Scholar] [CrossRef]
  19. Babayevska, N.; Przysiecka, Ł.; Nowaczyk, G.; Jarek, M.; Järvekülg, M.; Kangur, T.; Janiszewska, E.; Jurga, S.; Iatsunskyi, I. Fabrication of gelatin-zno nanofibers for antibacterial applications. Materials 2021, 14, 103. [Google Scholar] [CrossRef]
  20. Taokaew, S.; Seetabhawang, S.; Siripong, P.; Phisalaphong, M. Biosynthesis and characterization of nanocellulose-gelatin films. Materials 2013, 6, 782–794. [Google Scholar] [CrossRef] [Green Version]
  21. Mousazadeh, S.; Ehsani, A.; Moghaddas Kia, E.; Ghasempour, Z.; Moghaddas, E.; Ghasempour, Z. Zinc oxide nanoparticles and periodate oxidation in developing pH-sensitive packaging film based on modified gelatin. Food Packag. Shelf Life 2021, 28, 100654. [Google Scholar] [CrossRef]
  22. Liff, S.; Mckinley, G.H.; Mehmood, Z.; Sadiq, M.B.; Khan, M.R.; Hanani, Z.A.N.; Sahraee, S.; Milani, J.M.; Ghanbarzadeh, B.; Hamishehkar, H.; et al. High-performance elastomeric nanocomposites via solvent-exchange processing. Food Packag. Shelf Life 2007, 21, 100363. [Google Scholar] [CrossRef] [PubMed]
  23. Mohammadi, A.; Moradpour, M.; Saeidi, M.; Karim, A. LWT—Food Science and Technology Effects of nanorod-rich ZnO on rheological, sorption isotherm, and physicochemical properties of bovine gelatin fi lms. LWT—Food Sci. Technol. 2014, 58, 142–149. [Google Scholar] [CrossRef]
  24. Kanmani, P.; Rhim, J.W. Physicochemical properties of gelatin/silver nanoparticle antimicrobial composite films. Food Chem. 2014, 148, 162–169. [Google Scholar] [CrossRef] [PubMed]
  25. He, Q.; Zhang, Y.; Cai, X.; Wang, S. International Journal of Biological Macromolecules Fabrication of gelatin—TiO2 nanocomposite film and its structural, antibacterial and physical properties. Int. J. Biol. Macromol. 2016, 84, 153–160. [Google Scholar] [CrossRef]
  26. Hosseini, S.F.; Rezaei, M.; Zandi, M.; Farahmandghavi, F. Fabrication of bio-nanocomposite films based on fish gelatin reinforced with chitosan nanoparticles. Food Hydrocoll. 2015, 44, 172–182. [Google Scholar] [CrossRef]
  27. Flaker, C.H.C.; Lourenço, R.V.; Bittante, A.M.Q.B.; Sobral, P.J.A. Gelatin-based nanocomposite films: A study on montmorillonite dispersion methods and concentration. J. Food Eng. 2015, 167, 65–70. [Google Scholar] [CrossRef]
  28. Sahraee, S.; Milani, J.M.; Ghanbarzadeh, B.; Hamishehkar, H. International Journal of Biological Macromolecules Physicochemical and antifungal properties of bio-nanocomposite film based on gelatin-chitin nanoparticles. Int. J. Biol. Macromol. 2017, 97, 373–381. [Google Scholar] [CrossRef]
  29. Mehmood, Z.; Sadiq, M.B.; Khan, M.R. Gelatin nanocomposite films incorporated with magnetic iron oxide nanoparticles for shelf life extension of grapes. J. Food Saf. 2020, 40. [Google Scholar] [CrossRef]
  30. Mohan, P.; Mala, R. Comparative antibacterial activity of magnetic iron oxide nanoparticles synthesized by biological and chemical methods against poultry feed pathogens. Mater. Res. Express 2019, 6, 115077. [Google Scholar] [CrossRef]
  31. Tran, N.; Mir, A.; Mallik, D.; Sinha, A.; Nayar, S.; Webster, T.J. Bactericidal effect of iron oxide nanoparticles on Staphylococcus aureus. Int. J. Nanomed. 2010, 5, 277–283. [Google Scholar] [CrossRef] [Green Version]
  32. Junaid, M.; Dowlath, H.; Anjum, S.; Khalith, S.B.M.; Varjani, S.; Kumar, S.; Munuswamy, G.; Woong, S.; Jin, W.; Ravindran, B. Comparison of characteristics and biocompatibility of green synthesized iron oxide nanoparticles with chemical synthesized nanoparticles. Environ. Res. 2021, 201, 111585. [Google Scholar] [CrossRef]
  33. Singh, N.; Jenkins, G.J.S.; Asadi, R.; Doak, S.H. Potential toxicity of superparamagnetic iron oxide nanoparticles (SPION). Nano Rev. 2010, 1, 5358. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  34. Faria, N.; Pereira, D.; Mergler, B.; Powell, J.; Synthesis, A. Ligand doping of iron oxide nanoparticles as an approach to novel oral iron therapeutics. In Proceedings of the 2011 11th IEEE International Conference on Nanotechnology, Portland, OR, USA, 15–18 August 201; pp. 837–840.
  35. Mukherjee, P.; Ahmad, A.; Mandal, D.; Senapati, S.; Sainkar, S.R.; Khan, M.I.; Parishcha, R.; Ajaykumar, P.V.; Alam, M.; Kumar, R.; et al. Fungus-Mediated Synthesis of Silver Nanoparticles and Their Immobilization in the Mycelial Matrix: A Novel Biological Approach to Nanoparticle Synthesis. Nano Lett. 2001, 1, 515–519. [Google Scholar] [CrossRef]
  36. Rufus, A.; Sreeju, N.; Vilas, V.; Philip, D. Biosynthesis of hematite (α-Fe2O3) nanostructures: Size effects on applications in thermal conductivity, catalysis, and antibacterial activity. J. Mol. Liq. 2017, 242, 537–549. [Google Scholar] [CrossRef]
  37. Abdullah, J.A.A.; Salah Eddine, L.; Abderrhmane, B.; Alonso-González, M.; Guerrero, A.; Romero, A.; Ahmed, J.A.; Salah, L.; Abderrhmane, B. Green synthesis and characterization of iron oxide nanoparticles by pheonix dactylifera leaf extract and evaluation of their antioxidant activity. Sustain. Chem. Pharm. 2020, 17, 100280. [Google Scholar] [CrossRef]
  38. Felix, M.; Perez-Puyana, V.; Romero, A.; Guerrero, A. Production and Characterization of Bioplastics Obtained by Injection Moulding of Various Protein Systems. J. Polym. Environ. 2017, 25, 91–100. [Google Scholar] [CrossRef]
  39. AERNOR UNE-EN ISO 527-3; Plásticos. Determinación de las Propiedades en Tracción. Parte 3: Condiciones de Ensayo Para Películas y Hojas. EUROPEAN STANDARD: Pilsen, Czech Republic, 2019.
  40. El, S.; Koraichi, S.; Latrache, H.; Hamadi, F. Scanning Electron Microscopy (SEM) and Environmental SEM: Suitable Tools for Study of Adhesion Stage and Biofilm Formation. In Scanning Electron Microscopy; InTech: London, UK, 2012. [Google Scholar]
  41. Barkarmo, S.; Longhorn, D.; Leer, K.; Johansson, C.B.; Stenport, V.; Franco-Tabares, S.; Kuehne, S.A.; Sammons, R. Biofilm formation on polyetheretherketone and titanium surfaces. Clin. Exp. Dent. Res. 2019, 5, 427–437. [Google Scholar] [CrossRef]
  42. Voon, H.C.; Bhat, R.; Easa, A.M.; Liong, M.T.; Karim, A.A. Effect of Addition of Halloysite Nanoclay and SiO 2 Nanoparticles on Barrier and Mechanical Properties of Bovine Gelatin Films. Food Bioprocess Technol. 2012, 5, 1766–1774. [Google Scholar] [CrossRef]
  43. Wongphan, P.; Khowthong, M.; Supatrawiporn, T.; Harnkarnsujarit, N. Novel edible starch films incorporating papain for meat tenderization. Food Packag. Shelf Life 2022, 31, 100787. [Google Scholar] [CrossRef]
  44. Šupová, M.; Martynková, G.S.; Barabaszová, K. Effect of nanofillers dispersion in polymer matrices: A review. Sci. Adv. Mater. 2011, 3, 1–25. [Google Scholar] [CrossRef]
  45. Leelaphiwat, P.; Pechprankan, C.; Siripho, P.; Bumbudsanpharoke, N.; Harnkarnsujarit, N. Effects of nisin and EDTA on morphology and properties of thermoplastic starch and PBAT biodegradable films for meat packaging. Food Chem. 2022, 369, 130956. [Google Scholar] [CrossRef] [PubMed]
  46. Klinmalai, P.; Srisa, A.; Laorenza, Y.; Katekhong, W. Antifungal and plasticization effects of carvacrol in biodegradable poly (lactic acid) and poly (butylene adipate terephthalate) blend films for bakery packaging. LWT 2021, 152, 112356. [Google Scholar] [CrossRef]
  47. An, L.; Zhang, D.; Zhang, L.; Feng, G. Effect of nanoparticle size on the mechanical properties of nanoparticle assemblies. Nanoscale 2019, 11, 9563–9573. [Google Scholar] [CrossRef] [PubMed]
  48. Phothisarattana, D.; Wongphan, P.; Promhuad, K.; Promsorn, J. Biodegradable Poly (Butylene Adipate-Co-Terephthalate) and Thermoplastic Starch-Blended TiO2 Nanocomposite Blown Films as Functional Active Packaging of Fresh Fruit. Polymers 2021, 13, 4192. [Google Scholar] [CrossRef]
  49. Villasante, J.; Martin-Lujano, A.; Almajano, M.P. Characterization and application of gelatin films with pecan walnut and shell extract (Carya illinoiensis). Polymers 2020, 12, 1424. [Google Scholar] [CrossRef]
  50. Tanvir, S.; Qiao, L. Surface tension of Nanofluid-type fuels containing suspended nanomaterials. Nanoscale Res. Lett. 2012, 7, 226. [Google Scholar] [CrossRef] [Green Version]
  51. Paul, D.R.; Robeson, L.M. Polymer nanotechnology: Nanocomposites. Polymer 2008, 49, 3187–3204. [Google Scholar] [CrossRef] [Green Version]
  52. Salton, M.R.J. Studies of the bacterial cell wall. Biochim. Biophys. Acta 1953, 10, 512–523. [Google Scholar] [CrossRef]
  53. Armijo, L.M.; Wawrzyniec, S.J.; Kopciuch, M.; Brandt, Y.I.; Rivera, A.C.; Withers, N.J.; Cook, N.C.; Huber, D.L.; Monson, T.C.; Smyth, H.D.C.; et al. Antibacterial activity of iron oxide, iron nitride, and tobramycin conjugated nanoparticles against Pseudomonas aeruginosa biofilms. J. Nanobiotechnology 2020, 18, 1–27. [Google Scholar] [CrossRef] [Green Version]
  54. Lee, C.; Jee, Y.K.; Won, I.L.; Nelson, K.L.; Yoon, J.; Sedlak, D.L. Bactericidal effect of zero-valent iron nanoparticles on Escherichia coli. Environ. Sci. Technol. 2008, 42, 4927–4933. [Google Scholar] [CrossRef] [Green Version]
  55. Shuai, C.; Wang, C.; Qi, F.; Peng, S.; Yang, W.; He, C.; Wang, G.; Qian, G. Enhanced Crystallinity and Antibacterial of PHBV Scaffolds Incorporated with Zinc Oxide. J. Nanomater. 2020, 2020, 1–12. [Google Scholar] [CrossRef]
  56. Laorenza, Y.; Harnkarnsujarit, N. Carvacrol, citral and α-terpineol essential oil incorporated biodegradable films for functional active packaging of Pacific white shrimp. Food Chem. 2021, 363, 130252. [Google Scholar] [CrossRef] [PubMed]
Materials 15 01966 g001 550
Figure 1. Scheme of the gelatin-based biofilm processing method.
Figure 1. Scheme of the gelatin-based biofilm processing method.
Materials 15 01966 g001
Materials 15 01966 g002 550
Figure 2. Tensile test profile of the biofilms with different concentrations ((a) 0.25 and (b) 1.0% w/w) of green (GS) and chemical (CS) FexOy nanoparticles (NPs). Neat gelatin-based biofilm without NPs incorporated was used as the reference system.
Figure 2. Tensile test profile of the biofilms with different concentrations ((a) 0.25 and (b) 1.0% w/w) of green (GS) and chemical (CS) FexOy nanoparticles (NPs). Neat gelatin-based biofilm without NPs incorporated was used as the reference system.
Materials 15 01966 g002
Materials 15 01966 g003 550
Figure 3. Scanning electron microscopy (SEM) images of the bottom and upper surfaces of the biofilms with different concentrations (0.25 and 1.0% w/w) of GS and CS FexOy-NPs. Neat gelatin-based biofilm without NPs incorporated was used as the reference system.
Figure 3. Scanning electron microscopy (SEM) images of the bottom and upper surfaces of the biofilms with different concentrations (0.25 and 1.0% w/w) of GS and CS FexOy-NPs. Neat gelatin-based biofilm without NPs incorporated was used as the reference system.
Materials 15 01966 g003
Materials 15 01966 g004 550
Figure 4. Fe distribution observed by energy dispersive X-ray spectroscopy (EDX) in the bottom and upper surfaces of the biofilms with different concentrations (0.25 and 1.0) of GS and CS FexOy NPs. Neat gelatin-based biofilm without NPs incorporated was used as the reference system.
Figure 4. Fe distribution observed by energy dispersive X-ray spectroscopy (EDX) in the bottom and upper surfaces of the biofilms with different concentrations (0.25 and 1.0) of GS and CS FexOy NPs. Neat gelatin-based biofilm without NPs incorporated was used as the reference system.
Materials 15 01966 g004
Table
Table 1. Physicochemical and mechanical parameters and antioxidant activity values of the biofilms processed with different percentages (0.25 and 1.0%) of green (GS) and chemical (CS) FexOy nanoparticles (NPs). Neat gelatin-based biofilm without NPs incorporated was used as reference. Different superscript letters (a–d) of each column indicate significant differences (p < 0.05).
Table 1. Physicochemical and mechanical parameters and antioxidant activity values of the biofilms processed with different percentages (0.25 and 1.0%) of green (GS) and chemical (CS) FexOy nanoparticles (NPs). Neat gelatin-based biofilm without NPs incorporated was used as reference. Different superscript letters (a–d) of each column indicate significant differences (p < 0.05).
SampleC% (w/w)WS
(%)		T600
(%)		Thickness (µm)σmax
(MPa)		εmax (mm/mm)Young’s
Modulus (MPa)		DPPH Inhibition (%)
GS FexOy-NPs0.25%66.8 ± 2.3 bc45.2 ± 0.3 b98.94 ± 0.8 c14.8 ± 0.8 a0.03 ± 0.01 a494.2 ± 8.9 a78.0 ± 1.9 ab
1%64.1 ± 2.4 c29.2 ± 0.2 d105.6 ± 0.7 b11.9 ± 1.7 b0.02 ± 0.01 b586.6 ± 148.9 a84.7 ± 3.4 a
CS FexOy-NPs0.25%69.6 ± 2.2 b42.0 ± 0.6 c104.9 ± 0.4 b5.2 ± 0.6 d0.03 ± 0.02 a193.9 ± 94.0 bc76.3 ± 2.7 b
1%67.4 ± 1.5 bc29.3 ± 0.3 d109.1 ± 1.0 a8.4 ± 1.6 c0.02 ± 0.01 b263.5 ± 24.6 b79.6 ± 3.3 ab
Neat Gelatin80.9 ± 3.2 a60.0 ± 0.1 a89.2 ± 1.0 d4.6 ± 0.9 d0.07 ± 0.04 a67.3 ± 33.8 c44.5 ± 0.7 c
Table
Table 2. Fe concentration (%) in the bottom and upper surfaces of the biofilms with different concentrations (0.25 and 1.0) of GS and CS FexOy NPs.
Table 2. Fe concentration (%) in the bottom and upper surfaces of the biofilms with different concentrations (0.25 and 1.0) of GS and CS FexOy NPs.
BiofilmsBottomUpper
Fe (%)Fe (%)
GS FexOy-NPs 0.25%12.016.5
GS FexOy-NPs 1.0%13.330.3
CS FexOy-NPs 0.25%12.913.6
CS FexOy-NPs 1.0%16.743.4
Neat Gelatin--
Table
Table 3. The inhibition areas (represented by their diameter in mm) produced by gelatin-based biofilm with 1.0% GS and CS FexOy-NPs incorporated against Staphylococcus aureus (S. au) and Escherichia coli (E. col). Neat gelatin-based biofilm without NPs incorporated was used as the reference system. Different superscript letters (a–e) in a column indicate significant differences (p < 0.05).
Table 3. The inhibition areas (represented by their diameter in mm) produced by gelatin-based biofilm with 1.0% GS and CS FexOy-NPs incorporated against Staphylococcus aureus (S. au) and Escherichia coli (E. col). Neat gelatin-based biofilm without NPs incorporated was used as the reference system. Different superscript letters (a–e) in a column indicate significant differences (p < 0.05).
Test Time (h)BiofilmS. AuE. Col
UpperBottomUpperBottom
0 9 b9 c9 c9 b
24Neat Gelatin9.4 ± 0.3 b9.4 ± 0.3 c0.0 e0.0 c
GS-NPs12.8 ± 1.5 a13.5 ± 1.7 a13.4 ± 2.3 a15.5 ± 2.6 a
CS-NPs12.9 ± 1.1 a11 ± 1.3 bc12.5 ± 2.0 ab9.3 ± 2.4 b
48Neat Gelatin0.0 c0.0 d0.0 e0.0 c
GS-NPs12.3 ± 2.3 a12.6 ± 1.6 ab11.1 ± 0.7 b14.6 ± 1.9 ab
CS-NPs10.9 ± 2.9 ab10.9 ± 2.5 bc11.5 ± 0.4 ab0.0 c
72Neat Gelatin0.0 c0.0 d0.0 e0.0 c
GS-NPs9.1 ± 0 b9.5 ± 0.1 c6.1 ± 0.5 d8.3 ± 0.8 b
CS-NPs0.0 c0.0 d6.7 ± 1.6 d0.0 c
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Abdullah, J.A.A.; Jiménez-Rosado, M.; Guerrero, A.; Romero, A. Gelatin-Based Biofilms with FexOy-NPs Incorporated for Antioxidant and Antimicrobial Applications. Materials 2022, 15, 1966. https://doi.org/10.3390/ma15051966

AMA Style

Abdullah JAA, Jiménez-Rosado M, Guerrero A, Romero A. Gelatin-Based Biofilms with FexOy-NPs Incorporated for Antioxidant and Antimicrobial Applications. Materials. 2022; 15(5):1966. https://doi.org/10.3390/ma15051966

Chicago/Turabian Style

Abdullah, Johar Amin Ahmed, Mercedes Jiménez-Rosado, Antonio Guerrero, and Alberto Romero. 2022. "Gelatin-Based Biofilms with FexOy-NPs Incorporated for Antioxidant and Antimicrobial Applications" Materials 15, no. 5: 1966. https://doi.org/10.3390/ma15051966

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop