Next Article in Journal
Recreational Exercising and Self-Reported Cardiometabolic Diseases in German People Living with HIV: A Cross-Sectional Study
Previous Article in Journal
Work along Both Lines: The Positive Impact of Work-Based Social Media Use on Job Performance
Previous Article in Special Issue
Environment in Children’s Health: A New Challenge for Risk Assessment
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
IJERPH
Volume 18
Issue 21
10.3390/ijerph182111580
ijerph-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Application of Single-Particle Mass Spectrometer to Obtain Chemical Signatures of Various Combustion Aerosols

by
Hee-joo Cho
1,†,
Joonwoo Kim
1,†,
Nohhyeon Kwak
1,
Heesung Kwak
1,
Taewan Son
2,
Donggeun Lee
2 and
Kihong Park
1,*
1
School of Earth Sciences and Environmental Engineering, Gwangju Institute of Science and Technology, 123 Cheomdangwagiro, Buk-Gu, Gwangju 61005, Korea
2
School of Mechanical Engineering, Pusan National University, 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan 46288, Korea
*
Author to whom correspondence should be addressed.
†
These authors contributed equally to this work.
Int. J. Environ. Res. Public Health 2021, 18(21), 11580; https://doi.org/10.3390/ijerph182111580
Submission received: 30 September 2021 / Revised: 1 November 2021 / Accepted: 3 November 2021 / Published: 4 November 2021
(This article belongs to the Special Issue Exposure Assessment to Environmental Contaminants in Children)
Browse Figures
Versions Notes

Abstract

:
A single-particle mass spectrometer (SPMS) with laser ionization was constructed to determine the chemical composition of single particles in real time. The technique was evaluated using various polystyrene latex particles with different sizes (125 nm, 300 nm, 700 nm, and 1000 nm); NaCl, KCl, MgCO3, CaCO3, and Al2O3 particles with different chemical compositions; an internal mixture of NaCl and KCl; and an internal mixture of NaCl, KCl, and MgCl2 with different mixing states. The results show that the SPMS can be useful for the determination of chemical characteristics and mixing states of single particles in real time. The SPMS was then applied to obtain the chemical signatures of various combustion aerosols (diesel engine exhaust, biomass burning (rice straw), coal burning, and cooking (pork)) based on their single-particle mass spectra. Elemental carbon (EC)-rich and EC-organic carbon (OC) particles were the predominant particle types identified in diesel engine exhaust, while K-rich and EC-OC-K particles were observed among rice straw burning emissions. Only one particle type (ash-rich particles) was detected among coal burning emissions. EC-rich and EC-OC particles were observed among pork burning particles. The single-particle mass spectra of the EC or OC types of particles differed among various combustion sources. The observed chemical signatures could be useful for rapidly identifying sources of atmospheric fine particles. In addition, the detected chemical signatures of the fine particles may be used to estimate their toxicity and to better understand their effects on human health.

1. Introduction

Atmospheric aerosols have received increased interest due to their adverse impacts on human health and climate change [1,2,3,4]. These aerosols can be emitted directly from various sources, such as biomass burning, vehicles, industry, power plants, deserts, and oceans (primary aerosols), and produced by a gas–particle conversion process in the ambient atmosphere (secondary aerosols). Their effects on human health and climate change are related to the physical and chemical properties of the particles. Once released into the air, they also undergo physical and chemical transformations (i.e., aging process), resulting in changes in particle size, morphology, and chemical composition [1,5].
Much effort has been focused on developing new instruments to measure the chemical composition of aerosols in real time [6,7,8]. Various versions of mass spectrometric techniques are available depending on the types of aerosol inlet, particle sizing, ionization, and ion detection [9,10,11]. A series of aerosol mass spectrometers (AMSs) (Aerodyne Inc, Chicago, IL, USA) employing thermal vaporization followed by electron impact (EI) ionization have been developed to provide quantitative and qualitative information on the chemical composition of fine particles in real time [8,12]. However, it is difficult to detect refractory materials such as black carbon (BC) and heavy metals using an AMS. A recent version of the AMS, known as the soot particle aerosol mass spectrometer (SP-AMS), is able to measure BC [13,14]. However, it is difficult to gain a clear picture of the elemental composition and mixing state of individual single particles that mainly consist of refractory materials.
By using a single-particle mass spectrometer (SPMS) technique based on laser ablation and ionization, the chemical composition of individual single particles consisting of refractory materials and their mixing states can be determined in real time [9,10,15,16,17,18,19,20,21]. The particle detection efficiency of the SPMS can be improved by using a laser triggering system, which consists of two light-scattering lasers, enabling the accurate estimation of the arrival time of particles at the ionization laser location [16,17,18,22,23,24,25,26]. However, since this kind of SPMS uses light scattered by particles, it is hard to detect nanoparticles or fine particles that scatter little light. An SPMS without a triggering system (i.e., free-firing mode) is able to detect nanoparticles or fine particles but sacrifices particle detection efficiency [15].
To locate and identify sources of atmospheric fine particles, it is essential to have the chemical profiles or signatures of fine particles produced from major candidate sources (database of chemical signatures) to compare with those of unknown particles in the ambient atmosphere. Since the SPMS is used to identify sources of atmospheric fine particles, chemical signatures of fine particles measured with the SPMS should be required. Furthermore, the detected chemical signatures of fine particles can be used to estimate their toxicity, which can be useful for understanding their effects on human health.
In this study, to better understand the chemical characteristics and mixing states of single particles in real time, a prototype SPMS employing laser ionization was constructed. Firstly, the SPMS was evaluated by using diverse particles with different sizes, chemical compositions, and mixing states. Then, the SPMS was applied to various combustion aerosols, and their chemical signatures and mixing states were determined, which can be useful for identifying sources of atmospheric fine particles and for better understanding their effects on human health.

2. Materials and Methods

The SPMS design is based on our previous works [8,15,27]. As shown in Figure 1, it mainly consists of an aerosol inlet system with an aerodynamic lens, a laser desorption/ionization system, and a linear time-of-flight mass spectrometer (TOF-MS). Three high vacuum chambers that are separated by a skimmer with a 3 mm inner diameter are maintained by turbo-molecular pumps (Navigator V301, Varian, Palo Alto, CA, USA). The pressure in the ionization chamber is kept below 10−6 Torr.
Aerosols are introduced through an inlet orifice with an inner diameter of 100 μm and a flow rate of 0.07 L/m, and, then, particles are focused into a particle beam of approximately 1 mm diameter by passing them through the aerodynamic lens system [28,29]. The aerodynamic lens is used as an interface to introduce aerosols from the atmosphere to the high vacuum system, and a collimated particle beam is generated for successful detection by the ionization laser. After exiting the aerodynamic lens, the particles achieve terminal velocity distribution, which is a function of their aerodynamic diameters during supersonic expansion [30,31,32]. A prototype aerodynamic lens is constructed, consisting of 12 sequential coaxial cylindrical orifices with varying diameters of 16, 7, 6, 5, 4, 5, 1.5, 14, 8, 5, 4.5, and 2.72 mm at the exit nozzle. The distance between the orifices is 40 mm. The particle beam diameter is much smaller than the diameters of the nozzle or skimmer. This can focus the particles onto the centerline of the orifices. The aerodynamic lens is mounted on the X-Y manipulator, which is used to adjust the direction and position of the particle beam, maximizing the transmission of particles to the laser ionization position.
A Nd: YAG laser (Ultra50, Quantel, Bozeman, MT, USA) with a 266 nm wavelength is used for the laser ionization of particles. The pulse energy of the laser beam is ~4 mJ/pulse before focusing the particles, and the calculated power density at the laser focal point is 1.3 × 105 W/cm2. The maximum frequency of the laser is 20 Hz, and its pulse width is 3 ns. The frequency of TOF measurements is the same as the laser frequency. The measured mass range (m/z) is 0–230. When the single particle arrives at the center of the ionization point at the same time that the ionization laser fires (i.e., free-firing laser), the particle can be ionized to form ions by a multiphoton ionization process. The ions produced by laser ionization of the single particle are analyzed by the TOF-MS (RM Jordan Co., Grass Valley, CA, USA) in positive mode, and data are obtained by an oscilloscope (Waverunner 640Zi, Teledyne Lecroy, Ramapo, NY, USA) at a sampling speed of 1 GS/s. The ionization laser light detected by the photodiode is the triggering source of the TOF-MS. The ions produced from the particles are extracted from the drift tube to an electric-field-free region. The voltages are 4000 V for the repeller grid plate, 2850 V for the extraction grid plate, and 0 V for the acceleration grid plate and four steering plates in the TOF tube. After traveling along the 1 m long linear tube, the ions are detected by an MCP detector assembly (−3600 V), resulting in single-particle mass spectra (positive mass spectra).
The obtained single-particle mass spectra were tested by using several statistical methods (K-means, principal component analysis (PCA), and ART-2a). The K-means algorithm was used to categorize the single-particle mass spectra because it had the best performance. The optimal number of classes or groups was determined by comparing the total separation variance (TSV) among them (i.e., similar mass spectra were grouped together). The tailing in the mass spectra could happen because no pulse signal was applied to the TOF-MS extraction plate. The m/z was adjusted to unit by rounding off, and the peak intensity was normalized before being used for the K-means algorithm.
Various polystyrene latex (PSL) particles with different sizes (125 nm, 300 nm, 700 nm, and 1000 nm) and inorganic particles with different chemical compositions were produced by using a constant atomizer (DS-A103, Dongsung Industry Inc., Hwaseong-si, Korea), where solutions were aerosolized and dried before being measured with the SPMS. Solutions for NaCl, KCl, FeSO4, CaCO3, and Al2O3, an internal mixture of NaCl and KCl, and an internal mixture of NaCl, KCl, and MgCl2 in deionized (DI) water were also prepared for the atomizer. All chemicals were purchased from Sigma-Aldrich, St. Louis, MO, USA.
Figure 2 shows various systems for generating combustion aerosols (diesel engine, biomass burning, coal burning, and meat burning). The particle generation systems were described in detail in our previous papers [33,34,35]. Briefly, diesel engine exhaust particles were produced from a diesel generator (192FC, Hi-earns, Changzhou, China), as shown in Figure 2a. The diesel generator (498 cc) was operated in idle mode at 3000 rpm. The tailpipe of the generator was directly exposed to the atmosphere, and an aerosol flow including diesel engine exhaust particles was sampled near the tailpipe. Then, aerosol flow with a flow rate of 1 L/m was mixed with particle-free air with a flow rate of 100 L/m to achieve dilution and cooling. The dilution ratio was around 100. For the generation of biomass burning particles, a biomass-burning chamber was constructed, as shown in Figure 2b. It consists of a combustion stove (0.8 m × 0.8 m × 0.8 m) and a dilution chamber (1.5 m × 1.5 m × 1.5 m). Approximately 25 g of rice straw, which was collected in an agricultural area of South Korea (Yeosu), was burned in the combustion stove. The rice straw is a major type of agricultural waste in South Korea and is usually burned intensively on farmland after harvest [36,37,38], causing severe local haze events. Coal combustion particles were produced by a coal-burning system (see Figure 2c) comprising a high-temperature tube furnace (Lindberg/Blue M, HTF55322C, Thermo Electron Corp., Franklin, MA, USA) and a dilution chamber. Bituminous coal was obtained from a coal power plant in South Korea (Korea South Power, Busan, Korea), and it was pulverized and screened (<75 μm) before being burned. The pulverized coal was fed into the tube furnace, where it was burned at a temperature of 550 °C. Then, coal burning particles were diluted approximately 100 times prior to the measurement. Meat (pork) cooking aerosols were produced by burning or grilling a piece of pork (belly part) with a propane burner, as shown in Figure 2d. Pork containing a high percentage of fat, which is burned on a pan, is a popular food in South Korea. Most of the smoke was exhausted into the fume hood, and an aerosol flow was sampled and mixed with dilution air before being measured with the SPMS. A series of diffusion dryers packed with silica gel and denuders (custom made) were installed in the aerosol flow line before being measured with the SPMS to remove water and volatile organic vapors from the aerosol flow. The scanning mobility particle sizer (SMPS) consisting of a differential mobility analyzer (3080, TSI, Shoreview, MN, USA) and a condensation particle counter (3788, TSI, USA) was used to determine the number size distribution of the generated particles.

3. Results and Discussion

A theoretical evaluation of the newly constructed aerodynamic lens system to focus particles into the center in the aerosol flow was conducted [28,32]. Ammonium sulfate particles were used as test aerosols. The transmission efficiency of the ammonium sulfate particles in a size range of 30 nm–10 µm was found to be higher than 90%. The particle’s terminal velocity was 224–322 m/s after passing through the aerodynamic lens. The focused particle beam diameter was less than 3 mm for particles with a diameter larger than 30 nm [29].
The single-particle mass spectra of PSL particles with various sizes (125 nm, 300 nm, 700 nm, and 1000 nm) are shown in Figure 3. Major peaks (C1 (m/z = 12) and C2 (m/z = 24) were identified for the PSL particles. Moreover, the Na+ (m/z = 23) and K+ (m/z = 39) peaks in the mass spectra were observed, which could originate from impurities in the PSL solution. The impurities of Na and K should become dominant when the partial ionization of particles by laser is strong. The Fe+ (m/z = 56) may originate from the electrodes under laser irradiation. The PSL particles were used to show that the SPMS is able to detect such particles of different sizes, and the accurate chemical signatures of PSL particles are not the focus of this research. All peak areas in the single-particle mass spectrum were summed to determine the total peak area, which increased as the particle size increased. However, the relationship was not as strong as in previous studies, suggesting that the complete ionization of particles was not achieved with less laser power intensity than that used in the previous studies [8,27].
The SPMS was also tested by using NaCl, KCl, MgCO3, CaCO3, and Al2O3 particles; an internal mixture of NaCl and KCl; and an internal mixture of NaCl, KCl, and MgCl2. Their single-particle mass spectra are shown in Figure 4. Major elements in these particles were clearly detected by the SPMS. The theoretical mass-to-charge ratios (m/z) for chemical elements agree well with the observed m/z values (y = 1.056 x − 0.7302 and r = 0.9994, where y is the observed m/z, x is the theoretical m/z, and r is the correlation coefficient). The Cl element was not detected under the current SPMS condition. Cl has often been detected in negative mass spectra [39]. Note that only positive mass spectra were measured in this study. The internal mixture of NaCl and KCl clearly had Na and K signals in the single-particle mass spectrum. Additionally, the internal mixture of NaCl, KCl, and MgCl2 clearly had Na, K, and Mg signals in the single-particle mass spectra. Our data suggest that the SPMS could be useful to determine the mixing states (internal mixture versus external mixture) of particles with different sizes.
Normalized particle number size distributions for various combustion aerosols are shown in Figure 5. Most of the particles were less than 1 µm (fine particles). The highest number of emissions was observed for the diesel engine exhaust particles with a mode diameter of 60 nm. The particles generated by rice straw burning had a bimodal distribution, and the first peak disappeared with the transition from flaming combustion to smoldering combustion [35]. The coal burning aerosols showed the smallest mode diameter, which was less than 30 nm (27.9 nm). The pork burning aerosols had a higher standard deviation in each size bin because they were generated by a more inhomogeneous burning process than the others.
The single-particle mass spectra obtained from the SPMS were classified by the K-means algorithm. Two major particle types were identified in diesel engine exhaust, as shown in Figure 6a. The EC-rich particles mostly consisted of elemental carbon (EC) (C1, C2, and C3) and a little organic carbon (OC) (CH3, C2H3, and C2H5), while the EC-OC particles included EC with a significant amount of OC (the C2H3 peak is higher than the C2 peak). Both particle types can be considered carbonaceous particles. In the diesel exhaust, the fraction of the EC-OC particles (74%) was higher than that of the EC-rich particles (26%). Diesel exhaust typically has higher particle number emissions and toxicity [33], which are a great concern for human health.
Two major particle types (K-rich and EC-OC-K particles) were observed among rice straw burning emissions, as shown in Figure 6b. K (m/z = 39), which is one of the essential elements for plants, was detected in all the single-particle mass spectra, supporting the notion that the K peak should be used as a chemical signature for biomass burning aerosols. The higher ionization efficiency of K compared to the other particles may also lead to a more significant K peak compared to other peaks. K-rich particles accounted for the highest fraction (68%), followed by EC-OC-K particles (5%). Biomass burning, including various wildfires and prescribed fires, is one of the largest sources of particulate matter in the world [40,41] and has significant effects on human health [42,43,44,45,46].
Only one particle type (ash-rich particles) was detected in coal burning emissions, as shown in Figure 6c. They mainly contained Na (m/z = 23), Mg (m/z = 24), Al (m/z = 27), and Ca (m/z = 40), consistent with earlier studies in which coal burning emissions contained a significant amount of minerals [47,48]. Pulverized coal combustion is typically used for the generation of electricity, accounting for around 40% of the world’s electricity [49]. In developing countries, coal is also used for household heating and cooking, which has adverse health effects on indoor residents [34,50,51,52].
Two types of particles (EC-rich and EC-OC particles) were observed among pork burning emissions, as shown in Figure 6d. The cooking process can contribute to high concentrations of indoor aerosols that affect human health [53]. EC-rich particles (36%) mainly consisted of C1, C2, and C3, as in the diesel exhaust particles but also comprised a small number of OC (e.g., CHx, C2Hx, and C3Hx). Note that the EC-rich particles produced from rice straw burning always had a K (m/z = 39) peak in the single-particle spectra, suggesting that the single-particle mass spectra of the EC-rich particles produced from the diesel engine, rice straw burning, and pork burning somewhat differed. For the EC-OC particles (62%), the OC peaks increased significantly. Organic compounds can include fatty acids in cooking aerosols [53,54].
The current SPMS measurement focused on the rapid classification of major particle types produced by various combustion sources rather than the accurate identification of organic compounds or speciation. Our data suggest that chemical signatures from various combustion aerosols can be identified. However, to successfully apply the SPMS technique for the rapid detection and classification of atmospheric aerosols on a single-particle basis, it is essential to obtain more single-particle mass spectra for other types of combustion aerosols (such as gasoline engine exhaust, pine wood burning, and fish cooking) and non-combustion aerosols (such as dust, sea-spray aerosols, secondary inorganic aerosols, and secondary organic aerosols). This will provide a useful method to accurately identify sources of fine particles and to better understand their effects on human health.

4. Conclusions

An SPMS with laser ionization was applied to detect and classify various fine particles (PSL particles with different sizes, inorganic particles and their mixtures, and combustion aerosols (diesel engine exhaust, rice straw burning, coal burning, and pork burning)) on a single-particle basis in real time. The major elements and mixing states (internal mixture versus external mixture) of the inorganic particles were successfully determined by the SPMS. Then, chemical signatures for the single-particle mass spectra of various combustion aerosols were obtained by SPMS measurements. EC-rich and EC-OC particles from diesel engine exhaust, K-rich and EC-OC-K particles from rice straw burning, ash-rich particles from coal burning, and EC-rich and EC-OC particles from pork burning were identified. The single-particle mass spectra of the EC or OC type of particles varied among different combustion sources. The EC-rich diesel engine exhaust particles mainly consisted of C1, C2, and C3, while EC-rich particles produced from rice straw burning always had a K peak in the single-particle spectra. The observed chemical signatures measured with the SPMS may be useful for identifying sources of atmospheric fine particles and for better understanding their effects on human health. However, more data on single-particle mass spectra for other types of combustion and non-combustion aerosols should be collected. In addition, the chemical signatures of fine particles detected by the SPMS may be used as an important parameter to infer their toxicity and effects on human health.

Author Contributions

Conceptualization, K.P.; methodology, K.P. and H.-j.C.; software, H.-j.C.; validation, K.P., H.-j.C. and J.K.; formal analysis, K.P., H.-j.C. and J.K.; investigation, N.K., H.K., T.S. and D.L.; writing—original draft preparation, K.P. and H.-j.C.; writing—review and editing, K.P., H.-j.C. and J.K.; visualization, H.-j.C. and J.K.; supervision, K.P.; project administration, K.P.; funding acquisition, K.P. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by the National Leading Research Laboratory Program (NRF-2019R1A2C3007202) and the Technology Development Program to Solve Climate Changes (NRF-2019M1A2A2103956) through the National Research Foundation (NRF) of Korea by the Ministry of Science and ICT. It was also funded by the Samsung Advanced Institute of Technology (SAIT).

Data Availability Statement

The data presented in this study are available on request from the corresponding author.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Pöschl, U. Atmospheric aerosols: Composition, transformation, climate and health effects. Angew. Chem. Int. Ed. 2005, 44, 7520–7540. [Google Scholar] [CrossRef] [PubMed]
  2. Pope, C.A., III; Dockery, D.W. Health effects of fine particulate air pollution: Lines that connect. J. Air Waste Manag. Assoc. 2006, 56, 709–742. [Google Scholar] [CrossRef]
  3. Cassee, F.R.; Héroux, M.E.; Gerlofs-Nijland, M.E.; Kelly, F.J. Particulate matter beyond mass: Recent health evidence on the role of fractions, chemical constituents and sources of emission. Inhal. Toxicol. 2013, 25, 802–812. [Google Scholar] [CrossRef] [PubMed]
  4. IPCC. Climate Change 2013: The Physical Science Basis. Contribution of Working Group I to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change; Cambridge University Press: Cambridge, UK; New York, NY, USA, 2013. [Google Scholar] [CrossRef] [Green Version]
  5. Li, W.; Shao, L.; Zhang, D.; Ro, C.-U.; Hu, M.; Bi, X.; Geng, H.; Matsuki, A.; Niu, H.; Chen, J. A review of single aerosol particle studies in the atmosphere of East Asia: Morphology, mixing state, source, and heterogeneous reactions. J. Clean. Prod. 2016, 112, 1330–1349. [Google Scholar] [CrossRef]
  6. Gard, E.; Mayer, J.E.; Morrical, B.D.; Dienes, T.; Fergenson, D.P.; Prather, K.A. Real-Time Analysis of Individual Atmospheric Aerosol Particles:  Design and Performance of a Portable ATOFMS. Anal. Chem. 1997, 69, 4083–4091. [Google Scholar] [CrossRef]
  7. Jayne, J.T.; Leard, D.C.; Zhang, X.; Davidovits, P.; Smith, K.A.; Kolb, C.E.; Worsnop, D.R. Development of an Aerosol Mass Spectrometer for Size and Composition Analysis of Submicron Particles. Aerosol Sci. Technol. 2000, 33, 49–70. [Google Scholar] [CrossRef] [Green Version]
  8. Mahadevan, R.; Lee, D.; Sakurai, H.; Zachariah, M. Measurement of condensed-phase reaction kinetics in the aerosol phase using single particle mass spectrometry. J. Phys. Chem. A 2002, 106, 11083–11092. [Google Scholar] [CrossRef]
  9. Noble, C.A.; Prather, K.A. Real-time single particle mass spectrometry: A historical review of a quarter century of the chemical analysis of aerosols. Mass Spectrom. Rev. 2000, 19, 248–274. [Google Scholar] [CrossRef]
  10. Murphy, D.M. The design of single particle laser mass spectrometers. Mass Spectrom. Rev. 2007, 26, 150–165. [Google Scholar] [CrossRef]
  11. Hartonen, K.; Laitinen, T.; Riekkola, M.-L. Current instrumentation for aerosol mass spectrometry. Trends Anal. Chem. 2011, 30, 1486–1496. [Google Scholar] [CrossRef]
  12. Canagaratna, M.R.; Jayne, J.T.; Jimenez, J.L.; Allan, J.D.; Alfarra, M.R.; Zhang, Q.; Onasch, T.B.; Drewnick, F.; Coe, H.; Middlebrook, A.; et al. Chemical and microphysical characterization of ambient aerosols with the aerodyne aerosol mass spectrometer. Mass Spectrom. Rev. 2007, 26, 185–222. [Google Scholar] [CrossRef]
  13. Lee, A.K.Y.; Willis, M.D.; Healy, R.M.; Onasch, T.B.; Abbatt, J.P.D. Mixing state of carbonaceous aerosol in an urban environment: Single particle characterization using the soot particle aerosol mass spectrometer (SP-AMS). Atmos. Chem. Phys. 2015, 15, 1823–1841. [Google Scholar] [CrossRef] [Green Version]
  14. Avery, A.M.; Williams, L.R.; Fortner, E.C.; Robinson, W.A.; Onasch, T.B. Particle detection using the dual-vaporizer configuration of the soot particle Aerosol Mass Spectrometer (SP-AMS). Aerosol Sci. Technol. 2021, 55, 254–267. [Google Scholar] [CrossRef]
  15. Park, K.; Lee, D.; Rai, A.; Mukherjee, D.; Zachariah, M.R. Size-Resolved Kinetic Measurements of Aluminum Nanoparticle Oxidation with Single Particle Mass Spectrometry. J. Phys. Chem. B 2005, 109, 7290–7299. [Google Scholar] [CrossRef]
  16. Brands, M.; Kamphus, M.; Böttger, T.; Schneider, J.; Drewnick, F.; Roth, A.; Curtius, J.; Voigt, C.; Borbon, A.; Beekmann, M.; et al. Characterization of a Newly Developed Aircraft-Based Laser Ablation Aerosol Mass Spectrometer (ALABAMA) and First Field Deployment in Urban Pollution Plumes over Paris During MEGAPOLI 2009. Aerosol Sci. Technol. 2011, 45, 46–64. [Google Scholar] [CrossRef] [Green Version]
  17. Gemayel, R.; Hellebust, S.; Temime-Roussel, B.; Hayeck, N.; Van Elteren, J.T.; Wortham, H.; Gligorovski, S. The performance and the characterization of laser ablation aerosol particle time-of-flight mass spectrometry (LAAP-ToF-MS). Atmos. Meas. Tech. 2016, 9, 1947–1959. [Google Scholar] [CrossRef] [Green Version]
  18. Shen, X.; Ramisetty, R.; Mohr, C.; Huang, W.; Leisner, T.; Saathoff, H. Laser ablation aerosol particle time-of-flight mass spectrometer (LAAPTOF): Performance, reference spectra and classification of atmospheric samples. Atmos. Meas. Tech. 2018, 11, 2325–2343. [Google Scholar] [CrossRef] [Green Version]
  19. Zhu, H.; Liu, M.; Guo, T.; Xu, L.; Dong, J.; Feng, J.; Cheng, P.; Zhou, Z. Laser ablation single particle aerosol mass spectrometry for the direct analysis of raw coal samples. J. Anal. At. Spectrom. 2018, 33, 1158–1167. [Google Scholar] [CrossRef]
  20. Froyd, K.D.; Murphy, D.M.; Brock, C.A.; Campuzano-Jost, P.; Dibb, J.E.; Jimenez, J.-L.; Kupc, A.; Middlebrook, A.M.; Schill, G.P.; Thornhill, K.L.; et al. A new method to quantify mineral dust and other aerosol species from aircraft platforms using single-particle mass spectrometry. Atmos. Meas. Tech. 2019, 12, 6209–6239. [Google Scholar] [CrossRef] [Green Version]
  21. Chen, Y.; Kozlovskiy, V.; Du, X.; Lv, J.; Nikiforov, S.; Yu, J.; Kolosov, A.; Gao, W.; Zhou, Z.; Huang, Z.; et al. Increase of the particle hit rate in a laser single-particle mass spectrometer by pulse delayed extraction technology. Atmos. Meas. Tech. 2020, 13, 941–949. [Google Scholar] [CrossRef] [Green Version]
  22. Su, Y.; Sipin, M.F.; Furutani, H.; Prather, K.A. Development and Characterization of an Aerosol Time-of-Flight Mass Spectrometer with Increased Detection Efficiency. Anal. Chem. 2004, 76, 712–719. [Google Scholar] [CrossRef]
  23. Zelenyuk, A.; Imre, D. Single Particle Laser Ablation Time-of-Flight Mass Spectrometer: An Introduction to SPLAT. Aerosol Sci. Technol. 2005, 39, 554–568. [Google Scholar] [CrossRef]
  24. Gaie-Levrel, F.; Perrier, S.; Perraudin, E.; Stoll, C.; Grand, N.; Schwell, M. Development and characterization of a single particle laser ablation mass spectrometer (SPLAM) for organic aerosol studies. Atmos. Meas. Tech. 2012, 5, 225–241. [Google Scholar] [CrossRef]
  25. Pratt, K.A.; Prather, K.A. Mass spectrometry of atmospheric aerosols--recent developments and applications. Part II: On-line mass spectrometry techniques. Mass Spectrom. Rev. 2012, 31, 17–48. [Google Scholar] [CrossRef] [PubMed]
  26. Marsden, N.; Flynn, M.J.; Taylor, J.W.; Allan, J.D.; Coe, H. Evaluating the influence of laser wavelength and detection stage geometry on optical detection efficiency in a single-particle mass spectrometer. Atmos. Meas. Tech. 2016, 9, 6051–6068. [Google Scholar] [CrossRef] [Green Version]
  27. Lee, D.; Park, K.; Zachariah, M.R. Determination of the Size Distribution of Polydisperse Nanoparticles with Single-Particle Mass Spectrometry: The Role of Ion Kinetic Energy. Aerosol Sci. Technol. 2005, 39, 162–169. [Google Scholar] [CrossRef] [Green Version]
  28. Lee, K.-S.; Hwang, T.-H.; Kim, S.-H.; Kim, S.H.; Lee, D. Numerical simulations on aerodynamic focusing of particles in a wide size range of 30 nm–10 μm. Aerosol Sci. Technol. 2013, 47, 1001–1008. [Google Scholar] [CrossRef]
  29. Hwang, T.-H.; Kim, S.-H.; Kim, S.H.; Lee, D. Reducing particle loss in a critical orifice and an aerodynamic lens for focusing aerosol particles in a wide size range of 30 nm–10 μm. J. Mech. Sci. Technol. 2015, 29, 317–323. [Google Scholar] [CrossRef]
  30. Liu, P.; Ziemann, P.J.; Kittelson, D.B.; McMurry, P.H. Generating Particle Beams of Controlled Dimensions and Divergence: I. Theory of Particle Motion in Aerodynamic Lenses and Nozzle Expansions. Aerosol Sci. Technol. 1995, 22, 293–313. [Google Scholar] [CrossRef] [Green Version]
  31. Liu, P.; Ziemann, P.J.; Kittelson, D.B.; McMurry, P.H. Generating Particle Beams of Controlled Dimensions and Divergence: II. Experimental Evaluation of Particle Motion in Aerodynamic Lenses and Nozzle Expansions. Aerosol Sci. Technol. 1995, 22, 314–324. [Google Scholar] [CrossRef]
  32. Wang, X.; McMurry, P.H. A Design Tool for Aerodynamic Lens Systems. Aerosol Sci. Technol. 2006, 40, 320–334. [Google Scholar] [CrossRef]
  33. Park, M.; Joo, H.S.; Lee, K.; Jang, M.; Kim, S.D.; Kim, I.; Borlaza, L.J.S.; Lim, H.; Shin, H.; Chung, K.H.; et al. Differential toxicities of fine particulate matters from various sources. Sci. Rep. 2018, 8, 17007. [Google Scholar] [CrossRef] [PubMed]
  34. Joo, H.S.; Batmunkh, T.; Borlaza, L.J.S.; Park, M.; Lee, K.Y.; Lee, J.Y.; Chang, Y.W.; Park, K. Physicochemical properties and oxidative potential of fine particles produced from coal combustion. Aerosol Sci. Technol. 2018, 52, 1134–1144. [Google Scholar] [CrossRef] [Green Version]
  35. Seo, I.; Lee, K.; Bae, M.S.; Park, M.; Maskey, S.; Seo, A.; Borlaza, L.J.S.; Cosep, E.M.R.; Park, K. Comparison of physical and chemical characteristics and oxidative potential of fine particles emitted from rice straw and pine stem burning. Environ. Pollut. 2020, 267, 115599–115611. [Google Scholar] [CrossRef] [PubMed]
  36. Ryu, S.Y.; Kim, J.E.; Zhuanshi, H.; Kim, Y.J.; Kang, G.U. Chemical Composition of Post-Harvest Biomass Burning Aerosols in Gwangju, Korea. J. Air Waste Manag. Assoc. 2004, 54, 1124–1137. [Google Scholar] [CrossRef]
  37. Ryu, S.Y.; Kwon, B.G.; Kim, Y.J.; Kim, H.H.; Chun, K.J. Characteristics of biomass burning aerosol and its impact on regional air quality in the summer of 2003 at Gwangju, Korea. Atmos. Res. 2007, 84, 362–373. [Google Scholar] [CrossRef]
  38. Jung, J.; Kim, Y.J. Tracking sources of severe haze episodes and their physicochemical and hygroscopic properties under Asian continental outflow: Long-range transport pollution, postharvest biomass burning, and Asian dust. J. Geophys. Res. Atmos. 2011, 116, D02206. [Google Scholar] [CrossRef]
  39. Kane, D.B.; Wang, J.; Frost, K.; Johnston, M.V. Detection of Negative Ions from Individual Ultrafine Particles. Anal. Chem. 2002, 74, 2092–2096. [Google Scholar] [CrossRef]
  40. Streets, D.; Yarber, K.; Woo, J.H.; Carmichael, G. Biomass burning in Asia: Annual and seasonal estimates and atmospheric emissions. Glob. Biogeochem. Cycles 2003, 17, 1099–1118. [Google Scholar] [CrossRef] [Green Version]
  41. Reid, J.; Koppmann, R.; Eck, T.; Eleuterio, D. A review of biomass burning emissions part II: Intensive physical properties of biomass burning particles. Atmos. Chem. Phys. 2005, 5, 799–825. [Google Scholar] [CrossRef] [Green Version]
  42. Chen, J.; Li, C.; Ristovski, Z.; Milic, A.; Gu, Y.; Islam, M.S.; Wang, S.; Hao, J.; Zhang, H.; He, C.; et al. A review of biomass burning: Emissions and impacts on air quality, health and climate in China. Sci. Total Environ. 2017, 579, 1000–1034. [Google Scholar] [CrossRef] [Green Version]
  43. de Oliveira Alves, N.; Vessoni, A.T.; Quinet, A.; Fortunato, R.S.; Kajitani, G.S.; Peixoto, M.S.; de Souza Hacon, S.; Artaxo, P.; Saldiva, P.; Menck, C.F.M. Biomass burning in the Amazon region causes DNA damage and cell death in human lung cells. Sci. Rep. 2017, 7, 10937. [Google Scholar] [CrossRef]
  44. Wong, J.P.S.; Tsagkaraki, M.; Tsiodra, I.; Mihalopoulos, N.; Violaki, K.; Kanakidou, M.; Sciare, J.; Nenes, A.; Weber, R.J. Effects of Atmospheric Processing on the Oxidative Potential of Biomass Burning Organic Aerosols. Environ. Sci. Technol. 2019, 53, 6747–6756. [Google Scholar] [CrossRef]
  45. Ballesteros-González, K.; Sullivan, A.P.; Morales-Betancourt, R. Estimating the air quality and health impacts of biomass burning in northern South America using a chemical transport model. Sci. Total Environ. 2020, 739, 139755. [Google Scholar] [CrossRef]
  46. Karanasiou, A.; Alastuey, A.; Amato, F.; Renzi, M.; Stafoggia, M.; Tobias, A.; Reche, C.; Forastiere, F.; Gumy, S.; Mudu, P.; et al. Short-term health effects from outdoor exposure to biomass burning emissions: A review. Sci. Total Environ. 2021, 781, 146759. [Google Scholar] [CrossRef] [PubMed]
  47. Biswas, P.; Wu, C.Y. Control of Toxic Metal Emissions from Combustors Using Sorbents: A Review. J. Air Waste Manag. Assoc. 1998, 48, 113–127. [Google Scholar] [CrossRef] [Green Version]
  48. Zhuang, Y.; Biswas, P. Submicrometer particle formation and control in a bench-scale pulverized coal combustor. Energy Fuels 2001, 15, 510–516. [Google Scholar] [CrossRef]
  49. Yadav, S.; Mondal, S.S. A complete review based on various aspects of pulverized coal combustion. Int. J. Energy Res. 2019, 43, 3134–3165. [Google Scholar] [CrossRef]
  50. Kerimray, A.; Rojas-Solórzano, L.; Amouei Torkmahalleh, M.; Hopke, P.K.; Gallachóir, B.P.Ó. Coal use for residential heating: Patterns, health implications and lessons learned. Energy Sustain. Dev. 2017, 40, 19–30. [Google Scholar] [CrossRef]
  51. Li, Q.; Jiang, J.; Wang, S.; Rumchev, K.; Mead-Hunter, R.; Morawska, L.; Hao, J. Impacts of household coal and biomass combustion on indoor and ambient air quality in China: Current status and implication. Sci. Total Environ. 2017, 576, 347–361. [Google Scholar] [CrossRef] [Green Version]
  52. Li, Y.; Liu, X.; Men, Y.; Luo, Z.; Xiong, R.; Li, J.; Cheng, H.; Tao, S.; Shen, G. Indoor Coal Combustion for Heating Exacerbates CO2 Exposure Approaching Harmful Levels. Environ. Sci. Technol. Lett. 2021, 8, 861–866. [Google Scholar] [CrossRef]
  53. Abdullahi, K.L.; Delgado-Saborit, J.M.; Harrison, R.M. Emissions and indoor concentrations of particulate matter and its specific chemical components from cooking: A review. Atmos. Environ. 2013, 71, 260–294. [Google Scholar] [CrossRef]
  54. Buonanno, G.; Morawska, L.; Stabile, L. Particle emission factors during cooking activities. Atmos. Environ. 2009, 43, 3235–3242. [Google Scholar] [CrossRef] [Green Version]
Ijerph 18 11580 g001 550
Figure 1. A schematic of the single-particle mass spectrometer.
Figure 1. A schematic of the single-particle mass spectrometer.
Ijerph 18 11580 g001
Ijerph 18 11580 g002a 550Ijerph 18 11580 g002b 550
Figure 2. A schematic of various systems for generating combustion aerosols ((a) diesel engine, (b) biomass burning, (c) coal burning, and (d) meat burning).
Figure 2. A schematic of various systems for generating combustion aerosols ((a) diesel engine, (b) biomass burning, (c) coal burning, and (d) meat burning).
Ijerph 18 11580 g002aIjerph 18 11580 g002b
Ijerph 18 11580 g003 550
Figure 3. Single-particle mass spectra of PSL particles with different sizes (125 nm, 300 nm, 700 nm, and 1000 nm).
Figure 3. Single-particle mass spectra of PSL particles with different sizes (125 nm, 300 nm, 700 nm, and 1000 nm).
Ijerph 18 11580 g003
Ijerph 18 11580 g004 550
Figure 4. Single-particle mass spectra of NaCl, KCl, MgCO3, CaCO3, and Al2O3 particles; an internal mixture of NaCl and KCl; and an internal mixture of NaCl, KCl, and MgCl2.
Figure 4. Single-particle mass spectra of NaCl, KCl, MgCO3, CaCO3, and Al2O3 particles; an internal mixture of NaCl and KCl; and an internal mixture of NaCl, KCl, and MgCl2.
Ijerph 18 11580 g004
Ijerph 18 11580 g005 550
Figure 5. Particle number size distributions for various combustion aerosols ((a) diesel engine, (b) rice straw burning, (c) coal burning, and (d) pork burning).
Figure 5. Particle number size distributions for various combustion aerosols ((a) diesel engine, (b) rice straw burning, (c) coal burning, and (d) pork burning).
Ijerph 18 11580 g005
Ijerph 18 11580 g006a 550Ijerph 18 11580 g006b 550
Figure 6. Single-particle mass spectra of (a) diesel engine exhaust particles, (b) rice straw burning particles, (c) coal burning particles, and (d) pork burning particles classified by the K-means algorithm.
Figure 6. Single-particle mass spectra of (a) diesel engine exhaust particles, (b) rice straw burning particles, (c) coal burning particles, and (d) pork burning particles classified by the K-means algorithm.
Ijerph 18 11580 g006aIjerph 18 11580 g006b
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Cho, H.-j.; Kim, J.; Kwak, N.; Kwak, H.; Son, T.; Lee, D.; Park, K. Application of Single-Particle Mass Spectrometer to Obtain Chemical Signatures of Various Combustion Aerosols. Int. J. Environ. Res. Public Health 2021, 18, 11580. https://doi.org/10.3390/ijerph182111580

AMA Style

Cho H-j, Kim J, Kwak N, Kwak H, Son T, Lee D, Park K. Application of Single-Particle Mass Spectrometer to Obtain Chemical Signatures of Various Combustion Aerosols. International Journal of Environmental Research and Public Health. 2021; 18(21):11580. https://doi.org/10.3390/ijerph182111580

Chicago/Turabian Style

Cho, Hee-joo, Joonwoo Kim, Nohhyeon Kwak, Heesung Kwak, Taewan Son, Donggeun Lee, and Kihong Park. 2021. "Application of Single-Particle Mass Spectrometer to Obtain Chemical Signatures of Various Combustion Aerosols" International Journal of Environmental Research and Public Health 18, no. 21: 11580. https://doi.org/10.3390/ijerph182111580

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop