Next Article in Journal
Laser Optical Feedback Turns 60
Next Article in Special Issue
An Angular Radial Extended Interaction Amplifier at the W Band
Previous Article in Journal
Light Penetrating the Seawater Column as the Indicator of Oil Suspension—Monte Carlo Modelling for the Case of the Southern Baltic Sea
Previous Article in Special Issue
High-Speed THz Time-of-Flight Imaging with Reflective Optics
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Sensors
Volume 23
Issue 3
10.3390/s23031174
sensors-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Communication

Ultrafast Modulation of THz Waves Based on MoTe2-Covered Metasurface

by
Xing Xu
1,2,3,4,†,
Jing Lou
2,†,
Mingxin Gao
2,
Shiyou Wu
1,3,4,
Guangyou Fang
1,3,4 and
Yindong Huang
2,*
1
Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100094, China
2
Innovation Laboratory of Terahertz Biophysics, National Innovation Institute of Defense Technology, Beijing 100071, China
3
Key Laboratory of Electromagnetic Radiation and Sensing Technology, Chinese Academy of Sciences, Beijing 100190, China
4
School of Electronic, Electrical and Communication Engineering, University of Chinese Academy of Sciences, Beijing 100049, China
*
Author to whom correspondence should be addressed.
†
These authors contributed equally to this work.
Sensors 2023, 23(3), 1174; https://doi.org/10.3390/s23031174
Submission received: 20 December 2022 / Revised: 14 January 2023 / Accepted: 17 January 2023 / Published: 19 January 2023
(This article belongs to the Special Issue Millimeter Wave and Terahertz Source, Sensing and Imaging)
Browse Figures
Versions Notes

Abstract

:
The sixth generation (6G) communication will use the terahertz (THz) frequency band, which requires flexible regulation of THz waves. For the conventional metallic metasurface, its electromagnetic properties are hard to be changed once after being fabricated. To enrich the modulation of THz waves, we report an all-optically controlled reconfigurable electromagnetically induced transparency (EIT) effect in the hybrid metasurface integrated with a 10-nm thick MoTe2 film. The experimental results demonstrate that under the excitation of the 800 nm femtosecond laser pulse with pump fluence of 3200 μJ/cm2, the modulation depth of THz transmission amplitude at the EIT window can reach 77%. Moreover, a group delay variation up to 4.6 ps is observed to indicate an actively tunable slow light behavior. The suppression and recovery of the EIT resonance can be accomplished within sub-nanoseconds, enabling an ultrafast THz photo-switching and providing a promising candidate for the on-chip devices of the upcoming 6G communication.

1. Introduction

Located in the electromagnetic spectrum between the microwave and infrared region, the terahertz (THz) frequency band is a spectral window with great scientific interests [1,2,3]. Nowadays, the THz technology has found wide applications, including nondestructive sensing [4], biomedicine [5], security inspection [6], and communication [7,8,9]. As one of the most promising applications, the THz wireless communication has attracted tremendous attention in promoting the development of the sixth generation (6G) communication network, and is expected to enable the implementation of the “internet of everything” in the near future [10,11,12]. Generally, THz radiation can offer higher carrier frequency and spatial resolution than the microwave does. Meanwhile, it can penetrate a large number of the non-polar non-metallic substances, such as the silicon, plastic, clothing and paper, opening the way of novel communication to be used by satellites, autonomous cars, smart cities and so on [13,14,15]. It requires a series of regulations to THz waves when using as the 6G communication carriers. However, the limited availability of THz materials in nature prevents the flexible modulation of THz radiation [16].
The appearance of metasurfaces has provided an effective solution to modulate THz waves [17,18,19]. By altering the geometry and arrangement pattern of sub-wavelength meta-atoms in metasurfaces, the amplitude, phase and polarization of THz waves can be engineered, presenting numerous unusual applications, such as ultrathin flat lenses [20,21], THz broadband filter [22], and THz vortex beam generation [23,24]. Generally, once a planar metal structure is fabricated, its electromagnetic (EM) properties are unable to be actively tuned, which blocks the further flexible regulation of EM waves. To solve this problem, the concept of reconfigurable metasurfaces comprised of the active media and meta-atoms has been proposed [25,26,27]. By introducing the external excitation such as the optical [28,29,30,31,32,33], electrical [34,35,36], thermal [37,38,39] and mechanical stimuli [40,41], the intrinsic properties or physical form of the active media can be changed, affecting the EM properties of the metasurface. For example, for the THz asymmetric split ring resonators (TASRs) covered by a 310-nm thick germanium (Ge) film, photogenerated carriers can be excited by the 800 nm pump laser stimulus to change the resonance state [32]. Specifically, without pump laser excitation, the TASRs exhibits Fano resonance for the incident polarized THz radiation, denoted as the “on” state. When the pump laser reaches a threshold energy, the Fano resonance can be quenched, denoted as the “off” state. Moreover, compared with the electrical, thermal, and mechanical stimuli, the optical excitation possesses the unique advantage of ultrafast response speed. This means that the switch between “on” and “off” states can be achieved within picoseconds to nanoseconds. It shows the potential of providing an ultrafast data processing speed that is applicable in the 6G communication.
To realize the ultrafast switchable resonance state, one key point is to utilize the active semiconductor materials. Photocarrier dynamics in the active materials directly affect the switching time and modulation depth of the resonance. Nowadays, two-dimensional transition metal dichalcogenides (TMDCs) have received much attention due to their excellent photoelectric properties, such as the adjustable bandgap with the layer, high carrier mobility and good stability in the atmosphere [42,43]. MoTe2 is a significant TMDC semiconductor. The monolayer MoTe2 possesses a direct bandgap of about 1.1 eV [44], and the bulk form exhibits an indirect bandgap of about 0.88 eV [45]. Such a small bandgap enables a large number of photogenerated carriers in the material under the pump of the commercially available 800 nm laser (photon energy of 1.55 eV). Moreover, the carrier mobility of MoTe2 can reach 8.5 cm2/V/s at the thickness of 10 nm [46]. These outstanding characteristics promote the application of MoTe2 in photodetectors [47], phototransistors [48], field-effect transistors [49], and sensors [50]. However, as a prominent TMDC semiconductor, the application of MoTe2 in the ultrafast THz switch has not been reported.
In this paper, we report an ultrafast switchable transmission amplitude modulation as well as the slow light behavior by integrating the 10-nm thick 2H-type MoTe2 film with the electromagnetically induced transparency (EIT) metasurface, for the first time. Based on the homemade optical pump and THz probe (OPTP) spectroscopy system, the EIT amplitude modulation depth reaches 77% under the pump fluence of 3200 μJ/cm2 and shows a trend of quenching with higher pump energy. Moreover, a group delay variation up to 4.6 ps is measured to characterize the tunable slow light performance. It is demonstrated that the whole switch cycle from the ‘’off’’ to ‘’on’’ state of the EIT resonance can be completed on a timescale of the sub-nanosecond, providing a useful option for the ultrafast switchable THz metadevice that may be employed in the upcoming 6G communication.

2. Materials and Methods

2.1. MoTe2-Covered EIT Metasurface

Figure 1a shows the schematic illustration of the switchable EIT metasurface device. Specifically, functional meta-atoms composed of gold H-shaped cut wires (HW) and parallel cut wires (PW) are periodically arranged to realize the EIT resonance of the incident THz waves. The detailed geometric configuration of each meta-atom is presented in Figure 1b. The metasurface was fabricated on the sapphire substrate using the conventional photolithography technology, with its optical microscopic image shown in Figure 1c. Then, the 10-nm thick 2H-type MoTe2 film produced by the chemical vapor deposition was transferred onto the entire metasurface via the wet-transfer method [51], to complete the fabrication of the device. The surface morphology of the MoTe2-coated metasurface can be clearly observed in Figure 1d. When an external 800 nm femtosecond laser pulse is irradiated on the MoTe2 film, a large number of electrons can be excited to affect the coupling of the bright element HW and dark element PW, leading to the quenching of the EIT resonance. Immediately after that, the free electrons will recombine with the holes, and the EIT resonance will recover. The excitation and relaxation of such photogenerated carriers can be accomplished on the timescale of sub-nanosecond, enabling the ultrafast switching of the EIT resonant states. Generally, the external laser pulse is denoted as the optical pump, and the incident THz wave is denoted as the THz probe [32,52,53].

2.2. Optical Pump and Terahertz Probe (OPTP) Measurement

To characterize the ultrafast switchable EIT resonance of the device, we have built an optical pump and THz probe (OPTP) spectroscopy system, as illustrated in Figure 2. A Ti: sapphire amplifier of Spectra-Physics was adopted as the laser source, with parameters of the 800 nm central wavelength, 100 fs pulse duration, 5 mJ pulse energy and 1 kHz repetition rate. The laser pulse was split into three beams for the optical pump (Beam 1), THz generation (Beam 2), and electro-optic sampling (EOS) (Beam 3). In the light path of optical pump, Beam 1 firstly passed through a half-wave plate (HW) and a thin film polarizer (TFP). By rotating the HW, the intensity of the laser transmitted from the TFP can be adjusted. Then, after passing the delay line 1 (DL1) and penetrating the indium tin oxide transparent conductive film glass (ITO), the optical pump irradiated onto the surface of the hybrid metasurface. In another light path, Beam 2 was focused by a lens (focal length of 30 cm) and then acted on the zinc telluride electro-optic crystal (ZnTe) to generate the THz emission via optical rectification. The emitted THz wave was collected by a pair of off-axis parabolic mirrors (OMP1 and OMP2), and the high-resistivity silicon plate (HR-Si) between the OMPs was used to block the 800 nm laser and transmit the THz emission. It is worth noting that the ITO can transmit the infrared wave and reflect the THz wave. Therefore, the optical pump from Beam 1 and the THz probe from Beam 2 can act on the hybrid metasurface jointly. To ensure a fully adequate optical excitation, the spot size of the optical pump beam on the sample was arranged to be larger than the THz beam. Moreover, by moving the translation stage of DL1, the optical path difference between the optical pump and THz probe can be changed to adjust the pump-probe delay, which is the key point for the characterization of the ultrafast dynamics. Then, the modulated THz waveform can be recorded by the EOS measurement with Beam 3, and the corresponding THz spectrum can be obtained by the standard Fourier transformation.

3. Results

3.1. Simulation

In order to clarify the mechanism behind the modulation of MoTe2-film-covered EIT metasurface, we have performed the numerical simulation by using the CST Microwave Studio Software in the time domain. The fabricated metasurface has a size of 10 mm × 10 mm. Here, we only need to simulate a unit cell of 56 μm × 58.8 μm size with the “Periodic” boundary conditions imposed in the x- and y-directions. The THz wave is set as a vertically incident plane wave polarized along the x direction. A probe is placed at the bottom of the sapphire substrate to record the transmitted THz waveform.
As mentioned above, photogenerated carriers can be excited by the external laser pulse and will change the conductivity of the MoTe2 film. Without laser pumping, we consider that the initial conductivity of the MoTe2 film approximates to 0. For incident THz waves polarized along the x-direction, near-field coupling occurs between the H-shaped cut wire and parallel cut wires, leading to the high transmittance at 1.23 THz, as shown by the red line in Figure 3a. The corresponding near-field distribution is presented in Figure 3b, from which it can be observed that at the EIT peak frequency, the electric field of the H-shaped cut wire is suppressed, and the electromagnetic energy is transferred to the parallel cut wires. As we increase the conductivity of MoTe2 film, the transmission amplitude of the EIT window gradually decreases, and finally, the EIT phenomenon disappears at the conductivity of 1 × 105 S/m (Figure 3a). Meanwhile, the near-field coupling gradually weakens so that less energy is transferred to the parallel cut wires, which is manifested as the large reduction of the electric field intensity above the metasurface, as shown in Figure 3c–e. These simulations help us to design and carry out the following experiments.

3.2. Experimental Results

3.2.1. Pump-Fluence Controlled THz Transmission and Slow Light Behavior

Based on the homemade OPTP system, we have investigated the optical performance of the fabricated MoTe2-coated metasurface. Firstly, the THz transmission spectra under various pump fluences were measured and compared to validate the feasibility of active modulation, as presented in Figure 4a. It can be found that the EIT window is suppressed significantly with increasing pump fluence, which is consistent with the simulation of the photoconductivity-dependent EIT resonance. The deviation of the transmission amplitude in the measurement might be introduced by the dielectric loss as well as the slight differences of the parameters and boundary conditions between the simulation model and the sample. To quantitatively evaluate the modulation effect, the modulation depth defined by the expression M D E I T = ( T 0 − T p u m p ) / T 0 × 100 % is adopted [54]. In the expression, T 0 is the EIT amplitude without the pump and T p u m p is the EIT amplitude under the optical pump. The EIT amplitude is defined as the transmission amplitude difference between the peak (at 1.23 THz) and the valley (at 1.16 THz) of the EIT resonance [55].
When the pump fluence reaches 3200 μJ/cm2, the EIT modulation depth is calculated to be 77%, which is similar to the simulated modulation depth with the MoTe2 conductivity of 2 × 104 S/m. Generally, photoconductivity is proportional to the product of the carrier mobility μ and the carrier density n , with the expression of σ = μ e n e e + μ h n h q . Based on the electron mobility of 8.5 cm2/V/s in 10-nm thick MoTe2 given by Ref [46], the carrier density under the pump fluence of 3200 μJ/cm2 is estimated to be 1.47 × 1026 m–3, with the photoconductivity induced by the hole being ignored due to the fact that μ e ≫ μ h . Here, 3200 μJ/cm2 is the maximum pump fluence we can obtain in the experiment. If the pump laser energy can be further enhanced, it would be expected to achieve a larger modulation depth.
In addition to the pump fluence-dependent transmission spectra, the MoTe2-coated metasurface also exhibits an actively controlled slow light behavior [56]. To characterize the slow light performance, the group delay defined as Δ t g ( ω ) = − d ϕ / d ω is employed, where ϕ is the relative phase of transmitted THz wave compared with that from the pure sapphire substrate, and ω is the angular frequency of the THz wave. The spectra of Δ t g at different pump fluence is plotted in Figure 4b. Noted that the group delay reaches –6.3 ps at the EIT dip (1.16 THz) with no photo-injection, and increases to –1.7 ps at the maximum pump fluence. Such a high modulation depth of 4.6 ps can provide a wide manipulation range for light–matter interaction.

3.2.2. Ultrafast Dynamics of the Switching

In the last section, we have investigated the effect of pump fluence on THz transmission amplitude and group delay. It should be pointed out that the measurement was performed with a pump–probe delay of 0 ps to ensure the maximum modulation depth. The pump–probe delay is a variable that is used to represent the time difference to reach the metasurface between the THz pulse and the pump laser pulse. When the delay equals to 0, it implies the highest concentration of the photogenerated carriers when the THz probe interacts with the metasurface. The negative sign of the pump–probe delay means that the THz pulse reaches the metasurface earlier than the pump laser, whereas the positive sign represents the opposite.
Next, we will show the THz transmission spectra and group delay spectra at different pump-probe delays under the fixed pump fluence of 3200 μJ/cm2, to manifest the ultrafast switch of the EIT response. Figure 5a,b show the switching-off process of the EIT resonance, which corresponds to the excitation of photogenerated carriers. Herein, the pump–probe delay starts from –10 ps. In that case, the pump laser pulse incident on the metasurface just met the ‘tail’ of the THz probe pulse, and the induced carriers do not affect the EIT resonance. As the pump–probe delay gradually increases to 0, the pump pulse starts to catch up with the main peak of the THz pulse, and more photogenerated carriers are concentrated to diminish the EIT response. After that, the switching-on processes are plotted in Figure 5c,d, with the EIT resonance displaying an explicit trend of recovery. It can be observed that the switching-on process of the EIT takes longer time than the switching-off process, depending on the excitation and relaxation of the carriers. For the 10-nm thick MoTe2 film in our experiments, photogenerated carriers can be excited in a few picoseconds, but take hundreds of picoseconds for relaxation.
Finally, to better analyze the performance of the MoTe2-covered ultrafast all-optical tuning metasurface, the parameters of relevant research based on the typical semiconductors [33,57] and another kind of TMDC [55] are listed in Table 1. All of the hybrid metasurfaces listed are in the EIT resonance mode and are pumped by the laser of the 800 nm wavelength. By comparison, it is found that the hybrid metasurface with 10-nm thick MoTe2 film possesses the shorter switching time than that with the 500-nm-thick Si film [33], and its pump threshold is of the same order of magnitude as that with the 200-nm-thick Ge film [57]. Moreover, compared with the 40-nm thick WSe2 [55], which also belongs to the TMDCs, the 10-nm thick MoTe2 can achieve a greater modulation depth within the designed metasurface. Although the pump threshold of MoTe2 is not dominant, it is important to note that the film thickness we applied is the thinnest. As silicon-based devices approach the limits of Moore’s Law, processes below 14 nm are increasingly challenging. The quasi-two-dimensional MoTe2 with the thickness of 10 nm in our work has demonstrated the potential to surpass the silicon-based device in response speed, providing a promising candidate for the on-chip device. Moreover, the comparison of the simulated photoconductivity implies that 10-nm-thick MoTe2 might possess an ultrahigh optical conductivity, demonstrating competitiveness in the promising application of photoelectric devices.

4. Conclusions and Perspective

In summary, we have demonstrated an all-optically controlled ultrafast switching of the THz transmission and slow light behavior by integrating the 2H-type MoTe2 thin film with the EIT metasurface for the first time. The entire switching cycle can be completed in sub-nanoseconds, originating from the dynamic properties of the photocarriers in the MoTe2 film. Based on the experimental system of OPTP, the THz transmission amplitude modulation up to 77% is achieved under a pump fluence of 3200 μJ/cm2. In addition, a group delay variation as high as 4.6 ps is observed, indicating the slow light effect introduced by the fast change of refractive index on the resonant frequency of the designed EIT metasurface.
Our work provides a new candidate for on-chip devices on 6G communication, as well as an extraordinary slow light device to be applied in nonlinear optics, optical storage, and so on. The indirect band gap of MoTe2 implies a possible application for near-infrared fiber communication located at the O-band (1260 nm–1360 nm) [58], enabling a hybrid control and ultrafast trigger of the infrared and THz waves. Furthermore, recent advances of the optically controlled THz metasurface have experimentally demonstrated a calibration-free sensor for achieving high-precision biosensing detection [31]. Since the biological interest concerns the full spectral range from THz wave to the mid-infrared (MIR) [59,60], the resonant frequency of the matasurface can also be extended to the MIR for more practical applications.

Author Contributions

Conceptualization, X.X., J.L., G.F. and Y.H; methodology, X.X., J.L. and Y.H; simulation, X.X. and J.L; investigation, X.X. and M.G.; writing—original draft preparation, X.X.; writing—review and editing, X.X., J.L., S.W, G.F. and Y.H; project administration, Y.H.; funding acquisition, Y.H, G.F. and S.W. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by National Natural Science Foundation of China, Grant Nos. 12225511, T2241002, 12174449, 61988102 and 61971397.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Data underlying the results presented in this paper are not publicly available at this time but may be obtained from the authors upon reasonable request.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Zhang, X.C.; Shkurinov, A.; Zhang, Y. Extreme terahertz science. Nat. Photonics 2017, 11, 16–18. [Google Scholar] [CrossRef]
  2. Salen, P.; Basini, M.; Bonetti, S.; Hebling, J.; Krasilnikov, M.; Nikitin, A.Y.; Shamuilov, G.; Tibai, Z.; Zhaunerchyk, V.; Goryashko, V. Matter manipulation with extreme terahertz light: Progress in the enabling THz technology. Phys. Rep.-Rev. Sec. Phys. Lett. 2019, 836, 1–74. [Google Scholar] [CrossRef]
  3. Li, Y.; Chang, C.; Zhu, Z.; Sun, L.; Fan, C. Terahertz Wave Enhances Permeability of the Voltage-Gated Calcium Channel. J. Am. Chem. Soc. 2021, 143, 4311–4318. [Google Scholar] [CrossRef] [PubMed]
  4. Tao, Y.H.; Fitzgerald, A.J.; Wallace, V.P. Non-Contact, Non-Destructive Testing in Various Industrial Sectors with Terahertz Technology. Sensors 2020, 20, 712. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  5. Xiang, Z.; Tang, C.; Chang, C.; Liu, G. A primary model of THz and far-infrared signal generation and conduction in neuron systems based on the hypothesis of the ordered phase of water molecules on the neuron surface I: Signal characteristics. Sci. Bull. 2020, 65, 308–317. [Google Scholar] [CrossRef] [Green Version]
  6. Wang, L.; Yuan, M.; Huang, H.; Zhu, Y. Recognition of edge object of human body in THz security inspection system. Infrared Laser Eng. 2017, 46, 1125002. [Google Scholar] [CrossRef]
  7. Yang, Y.; Yamagami, Y.; Yu, X.; Pitchappa, P.; Webber, J.; Zhang, B.; Fujita, M.; Nagatsuma, T.; Singh, R. Terahertz topological photonics for on-chip communication. Nat. Photonics 2020, 14, 446. [Google Scholar] [CrossRef] [Green Version]
  8. Nagatsuma, T.; Ducournau, G.; Renaud, C.C. Advances in terahertz communications accelerated by photonics. Nat. Photonics 2016, 10, 371–379. [Google Scholar] [CrossRef]
  9. Oleiwi, H.W.; Al-Raweshidy, H. SWIPT-Pairing Mechanism for Channel-Aware Cooperative H-NOMA in 6G Terahertz Communications. Sensors 2022, 22, 6200. [Google Scholar] [CrossRef] [PubMed]
  10. Dang, S.; Amin, O.; Shihada, B.; Alouini, M.-S. What should 6G be? Nat. Electron. 2020, 3, 20–29. [Google Scholar] [CrossRef]
  11. Saad, W.; Bennis, M.; Chen, M.Z. A Vision of 6G Wireless Systems: Applications, Trends, Technologies, and Open Research Problems. IEEE Netw. 2020, 34, 134–142. [Google Scholar] [CrossRef] [Green Version]
  12. Wu, Z.H.; Zhang, T.R.; Li, Y.J.; Li, J.L.; Zhao, T.; Wang, W.; Song, T.; Liu, D.W.; Wei, Y.Y.; Gong, Y.B.; et al. Flexible terahertz dynamic tuning modulator: Top-to-bottom construction of in-plane gradient terahertz attenuator network. Compos. Part A-Appl. Sci. Manuf. 2022, 163, 107264. [Google Scholar] [CrossRef]
  13. Shishanov, S.; Bystrov, A.; Hoare, E.G.; Stove, A.; Gashinova, M.; Cherniakov, M.; Tran, T.-Y.; Clarke, N. Height-Finding for Automotive THz Radars. IEEE Trans. Intell. Transp. Syst. 2019, 20, 1170–1180. [Google Scholar] [CrossRef]
  14. Kokkoniemi, J.; Jornet, J.M.; Petrov, V.; Koucheryavy, Y.; Juntti, M. Channel Modeling and Performance Analysis of Airplane-Satellite Terahertz Band Communications. IEEE Trans. Veh. Technol. 2021, 70, 2047–2061. [Google Scholar] [CrossRef]
  15. Farooq, M.S.; Nadir, R.M.; Rustam, F.; Hur, S.; Park, Y.; Ashraf, I. Nested Bee Hive: A Conceptual Multilayer Architecture for 6G in Futuristic Sustainable Smart Cities. Sensors 2022, 22, 5950. [Google Scholar] [CrossRef]
  16. Ferguson, B.; Zhang, X.C. Materials for terahertz science and technology. Nat. Mater. 2002, 1, 26–33. [Google Scholar] [CrossRef]
  17. Yu, N.; Genevet, P.; Kats, M.A.; Aieta, F.; Tetienne, J.P.; Capasso, F.; Gaburro, Z. Light propagation with phase discontinuities: Generalized laws of reflection and refraction. Science 2011, 334, 333–337. [Google Scholar] [CrossRef] [Green Version]
  18. Sun, S.; He, Q.; Xiao, S.; Xu, Q.; Li, X.; Zhou, L. Gradient-index meta-surfaces as a bridge linking propagating waves and surface waves. Nat. Mater. 2012, 11, 426–431. [Google Scholar] [CrossRef]
  19. Zang, X.; Yao, B.; Chen, L.; Xie, J.; Guo, X.; Balakin, A.V.; Shkurinov, A.P.; Zhuang, S. Metasurfaces for manipulating terahertz waves. Light Adv. Manuf. 2021, 2, 148–172. [Google Scholar] [CrossRef]
  20. Wang, Q.; Zhang, X.; Xu, Y.; Tian, Z.; Gu, J.; Yue, W.; Zhang, S.; Han, J.; Zhang, W. A Broadband Metasurface-Based Terahertz Flat-Lens Array. Adv. Opt. Mater. 2015, 3, 779–785. [Google Scholar] [CrossRef]
  21. Li, W.Y.; Sun, R.; Liu, J.Y.; Meng, T.H.; Zhao, G.Z. Broadband and high efficiency terahertz metasurfaces for anomalous refraction and vortex beam generation. Chin. Phys. B 2022, 31, 108701. [Google Scholar] [CrossRef]
  22. Sun, D.D.; Qi, L.M.; Liu, Z.Y. Terahertz broadband filter and electromagnetically induced transparency structure with complementary metasurface. Results Phys. 2020, 16, 102887. [Google Scholar] [CrossRef]
  23. Li, W.Y.; Zhao, G.Z.; Meng, T.H.; Sun, R.; Guo, J.Y. High efficiency and broad bandwidth terahertz vortex beam generation based on ultra-thin transmission Pancharatnam-Berry metasurfaces. Chin. Phys. B 2021, 30, 058103. [Google Scholar] [CrossRef]
  24. Li, X.N.; Zhou, L.; Zhao, G.Z. Terahertz vortex beam generation based on reflective metasurface. Acta Phys. Sin. 2019, 68, 238101. [Google Scholar] [CrossRef]
  25. Zheludev, N.I.; Kivshar, Y.S. From metamaterials to metadevices. Nat. Mater. 2012, 11, 917–924. [Google Scholar] [CrossRef]
  26. He, Q.; Sun, S.; Zhou, L. Tunable/Reconfigurable Metasurfaces: Physics and Applications. Research 2019, 2019, 1849272. [Google Scholar] [CrossRef] [Green Version]
  27. Fan, Y.C.; Zhao, Q.; Zhang, F.L.; Shen, N.H. Editorial: Tunable and Reconfigurable Optical Metamaterials. Front. Phys. 2021, 9, 713966. [Google Scholar] [CrossRef]
  28. Gu, J.; Singh, R.; Liu, X.; Zhang, X.; Ma, Y.; Zhang, S.; Maier, S.A.; Tian, Z.; Azad, A.K.; Chen, H.-T.; et al. Active control of electromagnetically induced transparency analogue in terahertz metamaterials. Nat. Commun. 2012, 3, 1151. [Google Scholar] [CrossRef] [Green Version]
  29. Cong, L.; Srivastava, Y.K.; Zhang, H.; Zhang, X.; Han, J.; Singh, R. All-optical active THz metasurfaces for ultrafast polarization switching and dynamic beam splitting. Light-Sci. Appl. 2018, 7, 28. [Google Scholar] [CrossRef] [Green Version]
  30. Xu, X.; Lou, J.; Wu, S.; Yu, Y.; Liang, J.; Huang, Y.; Fang, G.; Chang, C. SnSe2-functionalized ultrafast terahertz switch with ultralow pump threshold. J. Mater. Chem. C 2022, 10, 5805–5812. [Google Scholar] [CrossRef]
  31. Lou, J.; Jiao, Y.; Yang, R.; Huang, Y.; Xu, X.; Zhang, L.; Ma, Z.; Yu, Y.; Peng, W.; Yuan, Y.; et al. Calibration-free, high-precision, and robust terahertz ultrafast metasurfaces for monitoring gastric cancers. Proc. Natl. Acad. Sci. USA 2022, 119, e2209218119. [Google Scholar] [CrossRef] [PubMed]
  32. Lim, W.X.; Manjappa, M.; Srivastava, Y.K.; Cong, L.Q.; Kumar, A.; MacDonald, K.F.; Singh, R. Ultrafast All-Optical Switching of Germanium-Based Flexible Metaphotonic Devices. Adv. Mater. 2018, 30, 7. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  33. Hu, Y.Z.; You, J.; Tong, M.Y.; Zheng, X.; Xu, Z.J.; Cheng, X.G.; Jiang, T. Pump-Color Selective Control of Ultrafast All-Optical Switching Dynamics in Metaphotonic Devices. Adv. Sci. 2020, 7, 10. [Google Scholar] [CrossRef] [PubMed]
  34. Lou, J.; Liang, J.; Yu, Y.; Ma, H.; Yang, R.; Fan, Y.; Wang, G.; Cai, T. Silicon-Based Terahertz Meta-Devices for Electrical Modulation of Fano Resonance and Transmission Amplitude. Adv. Opt. Mater. 2020, 8, 2000449. [Google Scholar] [CrossRef]
  35. Tao, X.; Qi, L.M.; Fu, T.; Wang, B.; Uqaili, J.A.; Lan, C.W. A tunable dual-band asymmetric transmission metasurface with strong circular dichroism in the terahertz communication band. Opt. Laser Technol. 2022, 150, 107932. [Google Scholar] [CrossRef]
  36. Nan, J.M.; Yang, R.S.; Xu, J.; Fu, Q.H.; Zhang, F.L.; Fan, Y.C. Actively modulated propagation of electromagnetic wave in hybrid metasurfaces containing graphene. Epj Appl. Metamater. 2021, 7, 9. [Google Scholar] [CrossRef]
  37. Kim, Y.; Wu, P.C.; Sokhoyan, R.; Mauser, K.; Glaudell, R.; Shirmanesh, G.K.; Atwater, H.A. Phase Modulation with Electrically Tunable Vanadium Dioxide Phase-Change Metasurfaces. Nano Lett. 2019, 19, 3961–3968. [Google Scholar] [CrossRef] [Green Version]
  38. Ma, H.; Wang, Y.; Lu, R.; Tan, F.; Fu, Y.; Wang, G.; Wang, D.; Liu, K.; Fan, S.; Jiang, K.; et al. A flexible, multifunctional, active terahertz modulator with an ultra-low triggering threshold. J. Mater. Chem. C 2020, 8, 10213–10220. [Google Scholar] [CrossRef]
  39. Liu, Z.Y.; Qi, L.M.; Lan, F.; Lan, C.W.; Yang, J.; Tao, X. A VO2 film-based multifunctional metasurface in the terahertz band. Chin. Opt. Lett. 2022, 20, 013602. [Google Scholar] [CrossRef]
  40. Pitchappa, P.; Manjappa, M.; Ho, C.P.; Singh, R.; Singh, N.; Lee, C. Active Control of Electromagnetically Induced Transparency Analog in Terahertz MEMS Metamaterial. Adv. Opt. Mater. 2016, 4, 541–547. [Google Scholar] [CrossRef]
  41. Zhu, W.M.; Liu, A.Q.; Bourouina, T.; Tsai, D.P.; Teng, J.H.; Zhang, X.H.; Lo, G.Q.; Kwong, D.L.; Zheludev, N.I. Microelectromechanical Maltese-cross metamaterial with tunable terahertz anisotropy. Nat. Commun. 2012, 3, 1274. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  42. Manzeli, S.; Ovchinnikov, D.; Pasquier, D.; Yazyev, O.V.; Kis, A. 2D transition metal dichalcogenides. Nat. Rev. Mater. 2017, 2, 17033. [Google Scholar] [CrossRef]
  43. Pumera, M.; Sofer, Z.; Ambrosi, A. Layered transition metal dichalcogenides for electrochemical energy generation and storage. J. Mater. Chem. A 2014, 2, 8981–8987. [Google Scholar] [CrossRef]
  44. Ruppert, C.; Aslan, O.B.; Heinz, T.F. Optical Properties and Band Gap of Single- and Few-Layer MoTe2 Crystals. Nano Lett. 2014, 14, 6231–6236. [Google Scholar] [CrossRef]
  45. Lezama, I.G.; Ubaldini, A.; Longobardi, M.; Giannini, E.; Renner, C.; Kuzmenko, A.B.; Morpurgo, A.F. Surface transport and band gap structure of exfoliated 2H-MoTe2 crystals. 2D Mater. 2014, 1, 021002. [Google Scholar] [CrossRef] [Green Version]
  46. Ji, H.; Lee, G.; Joo, M.-K.; Yun, Y.; Yi, H.; Park, J.-H.; Suh, D.; Lim, S.C. Thickness-dependent carrier mobility of ambipolar MoTe2: Interplay between interface trap and Coulomb scattering. Appl. Phys. Lett. 2017, 110, 183501. [Google Scholar] [CrossRef]
  47. Kuiri, M.; Chakraborty, B.; Paul, A.; Das, S.; Sood, A.K.; Das, A. Enhancing photoresponsivity using MoTe2-graphene vertical heterostructures. Appl. Phys. Lett. 2016, 108, 063506. [Google Scholar] [CrossRef]
  48. Yin, L.; Zhan, X.; Xu, K.; Wang, F.; Wang, Z.; Huang, Y.; Wang, Q.; Jiang, C.; He, J. Ultrahigh sensitive MoTe2 phototransistors driven by carrier tunneling. Appl. Phys. Lett. 2016, 108, 043503. [Google Scholar] [CrossRef]
  49. Pradhan, N.R.; Rhodes, D.; Feng, S.; Xin, Y.; Memaran, S.; Moon, B.-H.; Terrones, H.; Terrones, M.; Balicas, L. Field-Effect Transistors Based on Few-Layered alpha-MoTe2. Acs Nano 2014, 8, 5911–5920. [Google Scholar] [CrossRef] [Green Version]
  50. Lin, Y.-F.; Xu, Y.; Lin, C.-Y.; Suen, Y.-W.; Yamamoto, M.; Nakaharai, S.; Ueno, K.; Tsukagoshi, K. Origin of Noise in Layered MoTe2 Transistors and its Possible Use for Environmental Sensors. Adv. Mater. 2015, 27, 6612. [Google Scholar] [CrossRef]
  51. Suk, J.W.; Kitt, A.; Magnuson, C.W.; Hao, Y.; Ahmed, S.; An, J.; Swan, A.K.; Goldberg, B.B.; Ruoff, R.S. Transfer of CVD-Grown Monolayer Graphene onto Arbitrary Substrates. ACS Nano 2011, 5, 6916–6924. [Google Scholar] [CrossRef] [PubMed]
  52. Lou, J.; Xu, X.; Huang, Y.; Yu, Y.; Wang, J.; Fang, G.; Liang, J.; Fan, C.; Chang, C. Optically Controlled Ultrafast Terahertz Metadevices with Ultralow Pump Threshold. Small 2021, 17, e2104275. [Google Scholar] [CrossRef] [PubMed]
  53. Cong, L.Q.; Singh, R. Spatiotemporal Dielectric Metasurfaces for Unidirectional Propagation and Reconfigurable Steering of Terahertz Beams. Adv. Mater. 2020, 32, 2001418. [Google Scholar] [CrossRef] [PubMed]
  54. Manjappa, M.; Solanki, A.; Kumar, A.; Sum, T.C.; Singh, R. Solution-Processed Lead Iodide for Ultrafast All-Optical Switching of Terahertz Photonic Devices. Adv. Mater. 2019, 31, 1901455. [Google Scholar] [CrossRef] [PubMed]
  55. Hu, Y.; Jiang, T.; Zhou, J.; Hao, H.; Sun, H.; Ouyang, H.; Tong, M.; Tang, Y.; Li, H.; You, J.; et al. Ultrafast terahertz transmission/group delay switching in photoactive WSe2-functionalized metaphotonic devices. Nano Energy 2020, 68, 104280. [Google Scholar] [CrossRef]
  56. Krauss, T.F. Why do we need slow light? Nat. Photonics 2008, 2, 448–450. [Google Scholar] [CrossRef]
  57. He, W.; Tong, M.; Xu, Z.; Hu, Y.; Cheng, X.A.; Jiang, T. Ultrafast all-optical terahertz modulation based on an inverse-designed metasurface. Photonics Res. 2021, 9, 1099–1108. [Google Scholar] [CrossRef]
  58. Firstov, S.V.; Khegai, A.M.; Kharakhordin, A.V.; Alyshev, S.V.; Firstova, E.G.; Ososkov, Y.J.; Melkumov, M.A.; Iskhakova, L.D.; Evlampieva, E.B.; Lobanov, A.S.; et al. Compact and efficient O-band bismuth-doped phosphosilicate fiber amplifier for fiber-optic communications. Sci. Rep. 2020, 10, 11347. [Google Scholar] [CrossRef]
  59. Liu, G.; Chang, C.; Qiao, Z.; Wu, K.; Zhu, Z.; Cui, G.; Peng, W.; Tang, Y.; Li, J.; Fan, C. Myelin Sheath as a Dielectric Waveguide for Signal Propagation in the Mid-Infrared to Terahertz Spectral Range. Adv. Funct. Mater. 2019, 29, 1807862. [Google Scholar] [CrossRef]
  60. Zhang, J.; He, Y.; Liang, S.; Liao, X.; Li, T.; Qiao, Z.; Chang, C.; Jia, H.; Chen, X. Non-invasive, opsin-free mid-infrared modulation activates cortical neurons and accelerates associative learning. Nat. Commun. 2021, 12, 2730. [Google Scholar] [CrossRef]
Sensors 23 01174 g001 550
Figure 1. Schematic and working principle of the designed switchable EIT metasurface covered by the 10-nm thick MoTe2 multilayer. (a) An artistic illustration of the hybrid metasurface under illumination of the 800 nm femtosecond laser and THz probe pulse; (b) the geometrical configuration of one proposed unit cell with the following structure parameters: Px = 56 μm, Py = 58.8 μm, W = 5.6 μm, L = 42 μm, W1 = 12.6 μm, L1 = 28 μm, d = 3.5 μm, and s = 2.8 μm. (c,d) Optical microscope images of the fabricated metasurface, without MoTe2 and with 10-nm thick MoTe2 coating, respectively.
Figure 1. Schematic and working principle of the designed switchable EIT metasurface covered by the 10-nm thick MoTe2 multilayer. (a) An artistic illustration of the hybrid metasurface under illumination of the 800 nm femtosecond laser and THz probe pulse; (b) the geometrical configuration of one proposed unit cell with the following structure parameters: Px = 56 μm, Py = 58.8 μm, W = 5.6 μm, L = 42 μm, W1 = 12.6 μm, L1 = 28 μm, d = 3.5 μm, and s = 2.8 μm. (c,d) Optical microscope images of the fabricated metasurface, without MoTe2 and with 10-nm thick MoTe2 coating, respectively.
Sensors 23 01174 g001
Sensors 23 01174 g002 550
Figure 2. Schematic representation of the experimental setup. BS1 and BS2, beam splitters; M, mirror; L, lens; ZnTe, zinc telluride electro-optic crystal; OPM1-4, off-axis parabolic mirrors; HR-Si, high-resistivity silicon plate; ITO, indium tin oxide transparent conductive film glass; HW, half-wave plate; TFP, thin film polarizer; DL1 and DL2, delay lines; QW, quarter-wave plate; WP, Wollaston prism; BPD, balanced photodiodes.
Figure 2. Schematic representation of the experimental setup. BS1 and BS2, beam splitters; M, mirror; L, lens; ZnTe, zinc telluride electro-optic crystal; OPM1-4, off-axis parabolic mirrors; HR-Si, high-resistivity silicon plate; ITO, indium tin oxide transparent conductive film glass; HW, half-wave plate; TFP, thin film polarizer; DL1 and DL2, delay lines; QW, quarter-wave plate; WP, Wollaston prism; BPD, balanced photodiodes.
Sensors 23 01174 g002
Sensors 23 01174 g003 550
Figure 3. Simulated THz modulations of the hybrid EIT metasurface covered by the 10-nm thick MoTe2 film. (a) THz transmission spectra with various conductivity of the MoTe2 film from 0 S/m to 1 × 105 S/m. (b–e) Near E-field distributions above the metasurfaces at frequency of 1.23 THz within a unit cell.
Figure 3. Simulated THz modulations of the hybrid EIT metasurface covered by the 10-nm thick MoTe2 film. (a) THz transmission spectra with various conductivity of the MoTe2 film from 0 S/m to 1 × 105 S/m. (b–e) Near E-field distributions above the metasurfaces at frequency of 1.23 THz within a unit cell.
Sensors 23 01174 g003
Sensors 23 01174 g004 550
Figure 4. Pump fluence-dependent EIT response of the MoTe2-coated metasurface. (a) Measured THz transmission spectra for different pump fluence from 0 to 3200 μJ/cm2. (b) Measured group delays for different pump fluence from 0 to 3200 μJ/cm2.
Figure 4. Pump fluence-dependent EIT response of the MoTe2-coated metasurface. (a) Measured THz transmission spectra for different pump fluence from 0 to 3200 μJ/cm2. (b) Measured group delays for different pump fluence from 0 to 3200 μJ/cm2.
Sensors 23 01174 g004
Sensors 23 01174 g005 550
Figure 5. Ultrafast switching of the EIT resonance under pump fluence of 3200 μJ/cm2. (a,b) The switching-off process of transmission spectra and group delay spectra as a function of pump–probe delay, respectively. (c,d) The switching-on process of transmission spectra and group delay spectra at various pump-probe delays, respectively.
Figure 5. Ultrafast switching of the EIT resonance under pump fluence of 3200 μJ/cm2. (a,b) The switching-off process of transmission spectra and group delay spectra as a function of pump–probe delay, respectively. (c,d) The switching-on process of transmission spectra and group delay spectra at various pump-probe delays, respectively.
Sensors 23 01174 g005
Table
Table 1. Comparison of the ultrafast all-optical tuning metasurfaces.
Table 1. Comparison of the ultrafast all-optical tuning metasurfaces.
MaterialThickness
(nm)		Switching Time
(ps)		Pump Threshold
(μJ/cm2)		Simulated Photoconductivity
(S/m)		Modulation Depth
[33] Si500780 (half-recovery state)200600100%
[57] Ge2001522001000100%
[55] WSe2408800480043%
MoTe210<300 (half-recovery state)3200>2 × 10477%
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Xu, X.; Lou, J.; Gao, M.; Wu, S.; Fang, G.; Huang, Y. Ultrafast Modulation of THz Waves Based on MoTe2-Covered Metasurface. Sensors 2023, 23, 1174. https://doi.org/10.3390/s23031174

AMA Style

Xu X, Lou J, Gao M, Wu S, Fang G, Huang Y. Ultrafast Modulation of THz Waves Based on MoTe2-Covered Metasurface. Sensors. 2023; 23(3):1174. https://doi.org/10.3390/s23031174

Chicago/Turabian Style

Xu, Xing, Jing Lou, Mingxin Gao, Shiyou Wu, Guangyou Fang, and Yindong Huang. 2023. "Ultrafast Modulation of THz Waves Based on MoTe2-Covered Metasurface" Sensors 23, no. 3: 1174. https://doi.org/10.3390/s23031174

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop