Next Article in Journal
Empagliflozin Ameliorates Bleomycin-Induced Pulmonary Fibrosis in Rats by Modulating Sesn2/AMPK/Nrf2 Signaling and Targeting Ferroptosis and Autophagy
Next Article in Special Issue
Iridium Complexes with BIAN-Type Ligands: Synthesis, Structure and Redox Chemistry
Previous Article in Journal
Towards Novel Potential Molecular Targets for Antidepressant and Antipsychotic Pharmacotherapies
Previous Article in Special Issue
Halogen Bond to Experimentally Significant N-Heterocyclic Carbenes (I, IMe2, IiPr2, ItBu2, IPh2, IMes2, IDipp2, IAd2; I = Imidazol-2-ylidene)
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
IJMS
Volume 24
Issue 11
10.3390/ijms24119480
ijms-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Supramolecular Dimer as High-Performance pH Probe: Study on the Fluorescence Properties of Halogenated Ligands in Rigid Schiff Base Complex

by
Jiajun Xu
1,
Meifen Huang
2,
Liang Jiao
2,
Haijun Pang
3,
Xia Wang
1,
Rui Duan
1 and
Qiong Wu
1,4,*
1
Department of Chemical Science and Technology, Kunming University, Kunming 650214, China
2
College of Physics Science and Technology, Kunming University, Kunming 650214, China
3
The School of Material Science and Chemical Engineering, Harbin University of Science and Technology, Harbin 150040, China
4
Yunnan Key Laboratory of Metal-Organic Molecular Materials and Device, School of Chemistry and Chemical Engineering, Kunming University, Kunming 650214, China
*
Author to whom correspondence should be addressed.
Int. J. Mol. Sci. 2023, 24(11), 9480; https://doi.org/10.3390/ijms24119480
Submission received: 7 May 2023 / Revised: 23 May 2023 / Accepted: 24 May 2023 / Published: 30 May 2023
(This article belongs to the Special Issue Non-covalent Interactions in Coordination and Organometallic Chemistry)
Browse Figures
Review Reports Versions Notes

Abstract

:
The development of high-performance fluorescence probes has been an active area of research. In the present work, two new pH sensors Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn based on a halogenated Schiff ligand (3,5-Cl-saldmpn = N, N′-(3,3′-dipropyhnethylamine) bis (3,5-chlorosalicylidene)) with linearity and a high signal-to-noise ratio were developed. Analyses revealed an exponential intensification in their fluorescence emission and a discernible chromatic shift upon pH increase from 5.0 to 7.0. The sensors could retain over 95% of their initial signal amplitude after 20 operational cycles, demonstrating excellent stability and reversibility. To elucidate their unique fluorescence response, a non-halogenated analog was introduced for comparison. The structural and optical characterization suggested that the introduction of halogen atoms can create additional interaction pathways between adjacent molecules and enhance the strength of the interaction, which not only improves the signal-to-noise ratio but also forms a long-range interaction process in the formation of the aggregation state, thus enhancing the response range. Meanwhile, the above proposed mechanism was also verified by theoretical calculations.

Graphical Abstract

1. Introduction

pH plays a significant role in biological and physiological processes as it influences the function of enzymes and other biomolecules that are vital for various cellular activities such as energy generation, DNA replication, and signaling cascades [1,2,3,4]. Minor fluctuations in the pH environment can impact the function of intracellular enzymes and other biomolecules, altering metabolic reactions and other critical cellular processes [5,6]. pH also governs the electrical properties of cell membranes, influencing ion transport across them [7]. Furthermore, pH changes can trigger signaling pathways in cells, leading to variations in numerous physiological processes [8]. Therefore, pH is an essential factor in diverse biological systems, and accurate pH measurement is necessary to gain deeper insights into these processes. Given that most physiological and pathological processes occur within the pH range of 5.0 to 7.0, developing a real-time and high-precision pH detection method in this range is of profound importance [1,3].
pH test paper offers a simple and convenient way for semi-quantitative pH measurement via visual color changes, among which fluorescence detection technology is widely investigated and applied due to its high sensitivity, good selectivity and the ability to meet the demand of special detection conditions [2,9,10]. So far, fluorescent probes based on intramolecular charge transfer (ICT), fluorescence resonance energy transfer (FRET), photo-induced electron transfer (PET) and other mechanisms have been widely developed and used for pH detection [11,12,13]. However, we have noticed that the formation mechanism of the fluorescence signal is mainly based on changes in electronic or covalent structures, which can only generate a relatively weak response in terms of changes in external pH environments. Furthermore, the regulation strategy of traditional probes mainly focuses on the redesignation of the framework of the probes. Nevertheless, alterations to the molecular framework may impede the linear control of fluorescence demeanor or even fundamentally change the fluorescence behaviors of the probes. Therefore, the design and synthesis of high-performance probes with controllable fluorescence behavior to meet the specific demands of complex applications remains a challenge.
Supramolecular aggregates are formed through intermolecular recognition and their physicochemical properties can be adjusted based on the degree of aggregation without changing their internal molecular structure [14,15]. The driving forces behind supramolecular assembly can typically be attributed to intermolecular interactions such as π–π stacking, hydrogen bonding, halogen bonding, and electrostatic interactions, all of which can be significantly influenced by the changes in the H+ environment [15,16,17,18,19]. Halogen atoms can affect the electronic structure of the benzene ring through π–π conjugation or induction effects, and the substitution of hydrogen atoms on the benzene ring with different halogen atoms can control the surface charge distribution and regulate the intermolecular interactions [20,21,22]. Additionally, the substitutional halogen atoms also form extra charge transfer paths between fluorescent molecules, resulting in a more concentrated charge distribution and weaker electronic coupling between the molecules, which accelerates the rates of both radiative and non-radiative transitions [23,24,25]. More importantly, the changes in halogen atoms do not affect the mode of intermolecular interactions, enabling the theoretical feasibility of enhancing the signal-to-noise ratio of the probe by regulating the intermolecular interactions’ strength through different halogen atoms.
Salen-type molecules represent a class of Schiff base compounds formed by the condensation reactions of different salicylaldehydes and diamines, resulting in diverse structures and properties [15,20,26]. As an important molecule in materials science, salen has been extensively studied for decades, and its specific fluorescence behaviors have been widely applied in detection domains, such as biological imaging, metal ion recognition, explosive detection, and environmental monitoring [27,28,29,30]. Nonetheless, the confined fluorescence intensity and inferior stability of salen compounds significantly hamper their utilization as high-performance pH sensors.
In our previous work, we found that the pentadentate salen-type ligand exhibited enhanced stability upon halogenation, which could serve as a high-performance supramolecular fluorescent probe to detect pH between 5.0 and 6.0 [15]. However, since most physiological and pathological processes occur between 5.0–7.0, such a detection range is unable to satisfy the requirements of practical applications; further broadening the detection range and enabling them to more closely cover the full physiological pH range is of great importance [1,3]. Based on the aforementioned considerations, we designed and synthesized two new fluorescent probes based on rigid, halogenated Schiff base complexes, Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn, and introduced a non-halogenated analog (Zn-saldmpn) for comparison. The results indicated that the signal-to-noise ratio of the halogenated Schiff base probes was substantially enhanced, while the fluorescence intensities of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn increased by 12.2 and 6.7 times, respectively. Additionally, the halogen-regulated Schiff base complexes exhibited outstanding stability, selectivity, and reversibility. The study also performed an in-depth analysis of the single-crystal structure of the compounds and the intermolecular interaction between adjacent molecules. Theoretical calculations were also performed to investigate the potential mechanisms underlying the varying signal-to-noise ratios caused by the substitution of different atoms.

2. Results

2.1. Synthesis and Characterization

2.1.1. Synthesis of Zn-3,5-Cl-Saldmpn

The synthetic route of Zn-3,5-Cl-saldmpn is shown in Scheme 1 (R1). First, 0.191 g (1.0 mmol) of 3,5-dichlorosalicylaldehyde and 82 μL (0.5 mmol) of N′, N-bis(3-aminopropyl) methylamine were added to 50 mL of ethanol and stirred at room temperature for 2 h. Subsequently, 0.069 g (0.5 mmol) of ZnCl2 were added to the mixture, and the resulting solution turned yellow. The solution was then stirred for 1 h and filtered. After being left at room temperature for three days, clear yellow crystals of Zn-3,5-Cl-saldmpn were obtained, and the crystalline product was washed with ethanol and dried in air (yield 72.6%). FT-IR (KBr, cm−1): 1631 (C=N), 1450 (CH3), 1162 (C–O), 864 (Zn–N), 758 (C–Cl), and 557 (Zn–O) (Figure S1a).
In the UV absorption spectrum, the ligand H2-3,5-Cl-saldmpn showed two strong absorption peaks located at 282 nm and 328 nm, respectively. These two peaks were attributed to the π–π* transition of the benzene ring in the ligand molecule. In addition, a similar strong absorption peak was observed at 420 nm, which was attributed to the n–π* transition absorption peak on the C=N bond in the ligand molecule. Compared with the ligand, the position of the UV absorption peak of the metal complex Zn-3,5-Cl-saldmpn changed or disappeared. The original π–π* transition absorption peaks corresponding to the benzene ring at 282 nm and 328 nm of the ligand were red-shifted to 290 nm and 375 nm, respectively, in the complex. This indicated that the ligand H2-3,5-Cl-saldmpn had coordinated with the Zn(II) ions. At the same time, the absorption peak of the ligand H2-3,5-Cl-saldmpn near 420 nm disappeared in the complex. This indicated that the oxime nitrogen atom had also coordinated with the metal Zn(II) ions.

2.1.2. Synthesis of Zn-3,5-Br-Saldmpn

The synthetic route of Zn-3,5-Br-saldmpn is shown in Scheme 1 (R2), in which the procedures were the same as for Zn-3,5-Cl-saldmpn, except that 3,5-dibromosalicylaldehyde (0.280 g, 1.0 mmol) was used instead (yield: 71.8%). FT-IR (KBr, cm−1): 1631 (C=N), 1446 (CH3), 1149 (C–O), 871 (Zn–N), 702 (C–Br), and 553 (Zn–O) (Figure S1b).
In the UV absorption spectrum, the ligand H2-3,5-Br-saldmpn showed two strong absorption peaks located at 286 nm and 332 nm, respectively. These two peaks were attributed to the π–π* transition of the benzene ring in the ligand molecule. In addition, a similar strong absorption peak was observed at 422 nm, which was attributed to the n–π* transition absorption peak on the C=N bond in the ligand molecule. Compared with the ligand, the position of the UV absorption peak of the metal complex Zn-3,5-Br-saldmpn changed or disappeared. The original π–π* transition absorption peaks corresponding to the benzene ring at 286 nm and 332 nm of the ligand were red-shifted to 297 nm and 383 nm, respectively, in the complex. This indicated that the ligand H2-3,5-Br-saldmpn had coordinated with the Zn(II) ions. At the same time, the absorption peak of the ligand H2-3,5-B-saldmpn near 420 nm disappeared in the complex. This indicated that the oxime nitrogen atom had also coordinated with the metal Zn(II) ions.

2.1.3. Synthesis of Zn-Saldmpn

The synthetic route of Zn-saldmpn is shown in Scheme 1 (R3), in which the procedures were the same as Zn-3,5-Cl-saldmpn except that salicylaldehyde (0.125 g, 1.0 mmol) was used instead (yield: 64.5%). FT-IR (KBr, cm−1): 1627 (C=N), 1473 (CH3), 1153 (C–O), 899 (Zn–N), 758 (C–H), and 597 (Zn–O) (Figure S1c).
In the UV absorption spectrum, the ligand H2-saldmpn showed a strong absorption peak at 254 nm and a broader peak at 316 nm, which were attributed to the π–π* transition of the benzene ring and n–π* transitions of the C=N bonds, respectively. Compared with the ligand H2-saldmpn, the absorption peak of Zn-saldmpn was red-shifted to different degrees. The characteristic absorption band of the π–π* transition of the benzene ring was red-shifted to around 260 nm, which may have been due to the coordination of the O atom on the phenolic hydroxyl group, while the characteristic absorption band of the n–π* transition of the C=N group was red-shifted to 350 nm (Figure S2c).
CCDC 2254822, 2254823 and 680620 [31] contain the supplementary crystallographic data for this paper. These data can be obtained free of charge from The Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/data_request/cif (accessed on 6 May 2023).

2.2. Photophysical Properties

To explore the optical responses of the two halogenated Schiff base complexes to pH, we first determined their fluorescence intensity changes at different pH values (Figure S3). The experiment showed that as the pH transitioned from 2.0 to 5.0, the fluorescence intensity remained largely invariant, and overall exhibited fluorescence quenching effects. In contrast, as the pH ascended from 7.0 to 12.0, the fluorescence emission intensified but without marked variations. Strikingly, within the pH window spanning 5.0 to 7.0, the fluorescence intensities of both the halogenated Schiff base complexes exhibited a dramatic intensification (Figure 1a,b). The fluorescence intensities of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn were amplified by 12.2 and 6.7 times, respectively (Figure S4), and both showed excellent linearity within this range (Figure 1c,d), with R2 values of 0.996 and 0.990, respectively. Employing the Henderson–Hasselbalch equation [32,33], the pKa values of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn were calculated to be 6.05 and 6.11, respectively (Figure S5). In addition, we observed the change in fluorescence intensity from pH 5.0 to 7.0 under a 365 nm UV lamp (Figure 1e,f), which was consistent with the FL results, and the associated changes were discernible via visual examination. As is widely recognized, coordination complexes have stability within a certain pH range [15,34], particularly proximal to the pH of their synthesis conditions (Zn-3,5-Cl-saldmpn: pH = 5.8; Zn-3,5-Br-saldmpn: pH = 5.7). However, observing fluorescence behavior with an exceptionally robust signal-to-noise ratio near their synthesis pH is rather uncommon. To gain a better comprehension of this unusual phenomenon, we introduced the non-halogenated Schiff base complex Zn-saldmpn (Figure S3c,f) for comparison. Although the fluorescence intensity of Zn-saldmpn also increased as the pH changed from 5.0 to 7.0, its signal-to-noise ratio remained marginal (only 1.7).
This could be attributed to the decline in solution pH eliciting an elevation in solvent polarity, as well as the hydrogen atoms covering the non-halogenated isomer having a stronger affinity for polar solvents. Upon reaching the critical point, a relatively minor polarity change can cause the probe molecules to transform from free molecules to an aggregation state. However, for halogenated species, the incorporation of halogen atoms can augment molecular hydrophobicity and attenuate their response to polar solvents [35], resulting in a significant increase in the fluorescence response range of polar solvents. The following computational analysis provides further insight into this phenomenon.
The UV absorption spectra of three Schiff base derivatives are shown in Figure 2. As the pH descended from 7.0 to 5.0, the absorption peak of Zn-3,5-Cl-saldmpn at 380 nm gradually decreased, concomitant with the emergence of a novel absorption peak at 345 nm. Similar to Zn-3,5-Cl-saldmpn, the disappeared and newly formed absorption peaks of Zn-3,5-Br-saldmpn occurred at 383 nm and 341 nm, respectively. In contrast, the absorption peak of Zn-saldmpn at 352 nm lowered with the decrease in pH, and no new absorption peak was observed. Moreover, as the concentration of H+ increased, the color change from colorless to yellow of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn could be visually discerned under ambient light, while no such phenomenon occurred for Zn-saldmpn (Figure 2 inset). Therefore, the halogen-regulated Schiff base probes can serve as “naked-eye” colorimetric sensors for acidic pH values.

2.3. Sensing Mechanism

To investigate the anomalous optical behavior of the halogenated Schiff base complexes, we assessed and compared the quantum yields and fluorescence lifetimes of the three Schiff base complex derivatives. As delineated in Figure S6, the quantum yield of Zn-3,5-Cl-saldmpn increased substantially from 4.4% to 19.4% as the pH changed from 5.0 to 7.0. Similar to Zn-3,5-Cl-saldmpn, the quantum yield of Zn-3,5-Br-saldmpn also increased by 2.7% (Figure S7), whereas the quantum yield of Zn-saldmpn only showed an increasing trend over a small pH range from 5.0 to 6.0 (Figure S8). In terms of fluorescence lifetimes (Figure S9), the fluorescence lifetimes of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn also increased with the change in pH values, increasing by 4.03 ns and 0.16 ns, respectively. However, the variations in Zn-saldmpn were trivial and virtually negligible.
We then calculated the radiative decay rate constants (kr) and non-radiative decay rate constants (knr) for the three Schiff base complexes using quantum yields and fluorescence lifetimes (Table 1) [36]. It can be seen that as the pH increased from 5.0 to 7.0, the kr values of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn both increased, while the knr values decreased, which implied that the transmission efficiency of the emitted light was enhanced because the energy of the excitation light was more easily dispersed into radiative energy [37]. It should be noted that under the same pH conditions, the knr value of Zn-3,5-Br-saldmpn was much larger than that of Zn-3,5-Cl-saldmpn, which may have been caused by the heavy atom effect [38]. Specifically, the heavy atom effect can cause the compression of electron orbitals as well as the movement of energy levels, resulting in an acceleration of the average speed of electrons and an enhancement of the strength of the interaction between electrons and the lattice [39,40]. Therefore, although the substitution of the bromine atom results in the formation of stronger intermolecular interactions, the presence of the heavy atom effect leads to Zn-3,5-Br-saldmpn not yielding higher quantum yields.
The enhancement of the interaction increased the rate constant of non-radiative transitions, resulting in fluorescence quenching or reduction, which reduced the signal-to-noise ratio of Zn-3,5-Br-saldmpn at different pHs to a certain extent. Interestingly, when the pH was increased from 5.0 to 6.0, the kr value of Zn-saldmpn showed a certain degree of increase, indicating that the transmission of the emitted light became easier, which is consistent with the previously observed fluorescence enhancement phenomenon. However, as the pH continued to increase to 7.0, the kr value of Zn-saldmpn showed a downward trend. This complex change greatly limited the signal-to-noise ratio of Zn-saldmpn. In addition, the knr values of the three Schiff base complex derivatives were much higher than the kr, indicating the crucial role of intermolecular interactions in their fluorescence behavior.
Relevant research as well as our recent work progress indicate that H+ as a driving force can effectively regulate the strength of intermolecular interactions and construct specific supramolecular aggregates [15,20]. Since intermolecular interactions inhibit the emission process, the radiative decay rate constant kr can be significantly reduced with the formation of aggregate states. Furthermore, according to the exciton theory, fluorescent molecules can be seen as point dipoles, and the excited states of aggregates are split into two energy levels through the interaction of transition dipoles [41]. As the dipoles are parallel to each other, the repulsive force can cause a higher energy state, resulting in a blue shift in the UV absorption spectrum, which is consistent with the previous observations mentioned in the text [41]. Based on these observations, it is plausible to suggest that the difference in signal-to-noise ratios observed in the fluorescence signals of the Schiff base complex derivatives may be related to the formation of aggregates.
While investigating the influence of aggregate states on the fluorescence intensity of the studied compounds, as shown in Figure 3a, although the crystals of these three Schiff base complex derivatives exhibited a yellow color under sunlight, they all showed fluorescence quenching under the 365 nm UV lamp due to the formation of molecular aggregates and non-radiative transitions, which is consistent with the previously mentioned increase in the non-radiative decay rate constant. This is a typical aggregation-caused quenching (ACQ) behavior (Figure 3b) [42,43].
With the goal of studying the influence of the aggregation degree on the fluorescence signal-to-noise ratio of Schiff base complexes, we performed dynamic light scattering (DLS) experiments and observed the changes in the Tyndall phenomenon for the three Schiff base complexes at different pHs. As the pH further decreased, the particle size scales of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn increased significantly (Figure 3c and Figure S10), reaching an impressive 292.4 nm and 262.4 nm, respectively. In contrast, the particle size of the conventional Schiff base complex Zn-saldmpn remained almost unchanged during the decrease in pH from 7.0 to 6.0; when the pH was reduced to 5.0, the particle size of Zn-saldmpn rapidly increased to 111.6 nm (Figure 3d). Meanwhile, during the process of the pH decreasing from 7.0 to 5.0, the Tyndall effect of the halogenated Schiff base complexes showed a significant enhancement trend (Figure S11a,b), and the brightest light column appeared at pH 5.0. However, for the non-halogenated analog Zn-saldmpn, only a faint Tyndall beam appeared at pH 5.0 (Figure S11c). Since the Tyndall phenomenon can well reflect the size of nanoparticles in solution, and because the brightness of the light beam of the Tyndall effect is positively correlated with the size of the solute particles in the solution [44,45], the above results are completely consistent with the DLS data.
At the same time, we used scanning electron microscopy (SEM) to observe the self-assembly pathways of the three Schiff base complexes at the microstructure level. At pH 7.0, the three Schiff bases exhibited a dispersed structure (Figure 3e and Figure S12). However, when the pH lowered to 6.0, the halogenated Schiff bases exhibited an aggregation trend and formed small particles. As the pH continued to decrease to 5.0, Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn formed a cotton-like aggregation state. In contrast, Zn-saldmpn underwent almost no morphology changes as the pH decreased from 7.0 to 5.0, and only appeared as a block-like aggregate at pHs down to 5.0 (Figure 3f).
The aforementioned results indicate that the substitution of halogen atoms can effectively enhance the aggregation degree of probe molecules. Therefore, we speculate that the mechanism is mainly reflected in the following two aspects: First, compared with halogen bonds, the hydrogen bond is relatively more directional. This is mainly due to the large charge difference between the hydrogen atom and the electronegative atom, which makes the angle of D-H… A (donor atom (D), the hydrogen atom (H) and the acceptor atom (A)) more fixed. Although the hydrogen bond energy is large, its formation conditions are relatively strict, resulting in fewer hydrogen bonds and a relatively lower interaction energy.
The strong polarizing effect of halogen atoms leads to the formation of multiple uneven charge distribution regions both in the halogen atom as well as the bonded atoms. For example, the halogen atom attracts more electron density from the bonded atoms to form a higher negative charge density region that is perpendicular to the covalent bond, while the polarization of the electron cloud leads to the appearance of a positively charged region (σ-hole) along the bonding direction, which leads to a slightly lower bonding energy for halogen bonds but creates more pathways for interaction with surrounding molecules, resulting in overall higher intermolecular forces. For molecules dominated by H-aggregation, stronger intermolecular interactions will cause an increase in the rate of non-radiative transitions, making the fluorescence quenching phenomenon more pronounced, which is the main reason for the significantly high signal-to-noise ratio of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn. However, the heavy atom effect is significant in Br-substituted analogous, causing the non-radiative transition rate constant of Zn-3,5-Br-saldmpn to be much larger than that of Zn-3,5-Cl-saldmpn.

2.4. Single-Crystal X-ray and Theoretical Analysis

Although the fluorescence behavior of the reported compounds comes from the intermolecular interactions in the solution environment, the solid-state stacking mode is crucial to understanding the profound mechanism [46,47]. Therefore, to obtain single-crystal structural information, we reacted the halogenated ligand H2-saldmpn (H2-χ-saldmpn) with zinc chloride in a 1:1 stoichiometric ratio in anhydrous ethanol. A colorless crystal suitable for single-crystal diffraction was obtained after one week (Table S1).
The X-ray structural analysis showed that both crystallized in the monoclinic system (space group P21/c). Unexpectedly, the asymmetric unit incorporated two crystallographically independent, neutral Zn-χ-saldmpn units (abbreviated as [Zn1] and [Zn2]) (Figure 4b). According to the search results from the Cambridge Crystallographic Data Centre (CSD), although some non-halogenated saldmpn derivatives can be found in the database, all the deposited structures exist as single molecules. In addition to a halogenated trimer we previously reported [15], the Zn-χ-saldmpn series compounds (Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn) are the second supramolecular compounds based on saldmpn ligands.
As shown in Figure 4a and Figure S13, each saldmpn2− served as a pentadentate ligand, providing an N3O2 coordination sphere for the central atom, comprising one amine (Nam), two imine nitrogen atoms (Nim), and two phenolic oxygen atoms O*. The longest bond lengths around the metal center were the Zn-Nam bonds, ranging from 1.960 to 2.196 Å. The Zn-Nam bonds were the longest (2.149–2.196 Å), the Zn-Nim bonds were marginally abbreviated compared to the Zn-Nam bonds (2.049–2.087 Å), and the Zn-O* bonds were curtailed (1.960–2.00 Å). The lengths of these characteristic bonds were in the normal range of previously documented saldmpn-type zinc complexes. It is worth noting that due to the central atom connecting with the saldmpn2− ligand in a pentacoordinate mode, there are two possible geometric shapes: square pyramidal (SP) and trigonal bipyramidal (TB). These two coordination geometries can be well determined by the Addison parameter τ [48]. From the calculated results, we can see that the τ values of the four zinc atoms in the two compounds showed some differences. The values of Zn1 and Zn2 in Zn-3,5-Cl-saldmpn were τ1 = 0.738 and τ2 = 0.828, while the τ values of Zn1 and Zn2 in Zn-3,5-Br-saldmpn were τ1 = 0.7165 and τ2 = 0.805, which indicated that the geometric shapes of the two zinc atoms were identical and belonged to the SP configuration.
The analysis of the weak intramolecular and intermolecular interactions revealed that in addition to classical hydrogen bonding, other types of intermolecular interactions were formed in the supramolecular dimer structures, including halogen bonds and π–π stacking. The interactions between the two molecules can be divided into three parts from left to right: the first part involved stronger bifurcated C–H...O interactions (C27-H27...O2, C28-H28...O2), the second part included π–π interactions [Cg1..Cg2] ((Cg1: C1-C2-C3-C4-C5-C6; (Cg2: C1-C2-C3-C4-C5-C6)) located in the middle of the supermolecule, while the third part was dominated by halogen bond C–H...Cl and C–H...O interactions. Under the synergistic effect of these intermolecular interactions, these two neutral molecules were interconnected to each other, forming a unique dimeric supramolecular structure. Further, as shown in Figure 4c–e, C–H...Cl interactions connected adjacent dimeric supramolecules into one-dimensional chains.
In order to better comprehend the chemical reactivity, electronic structure, and optical properties of the compounds reported herein, we conducted theoretical calculations using density functional theory (DFT) at the B3LYP functional level with the 6-311 + G(d,p) basis set [49]. It should be noted that experimental results showed that the fluorescence intensity at pH = 7.0 mainly originated from the monomer, so in this work, the atomic coordinates for optimization originated from the crystal structure of the Zn1 fragment. In addition, to shed light on the influence of halogenated ligands on the fluorescence behavior, we also used the non-halogenated isomer Zn-saldmpn for comparison. As shown in Figure S14, the optimized geometry of the Zn1 fragment was in good agreement with the crystal data, suggesting the good stability and rigidity of the reported compound.
The electron density distribution of Zn-χ-saldmpn in the HOMO orbital was distributed throughout the halogenated benzene rings, while the LUMO electron was mainly concentrated in the amine region. Ascribed to the introduction of halogen atoms, the electron distribution area of the benzene rings increased, indicating an improvement in the molecular conjugation, causing the neighboring molecules to be prone to forming H-aggregates via π–π interactions [50,51]. In comparison, the conjugated plane of the non-halogenated isomer was smaller, and the rigidity of the structure resulted in more apparent steric effects, which led to a decrease in the strength of the interaction with the surrounding molecules. On the other hand, from the numerical perspective, compared with Zn-saldmpn, the LUMO energy levels of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn were reduced from −1.4376 to −2.143 and −1.885 eV, respectively, indicating that the substitution of halogen atoms also favored the electron-accepting ability of Saldmpn-type complexes. Additionally, the energy gap of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn was smaller than that of Zn-saldmpn by 0.110 and 0.134 eV, respectively (Figure 5a–c). Regarding the energy perspective, a lower band gap facilitated the electron-extracting process, which indicated that the halogenated Zn-χ-saldmpn complexes had a higher chemical reactivity than that of the non-halogenated derivatives.
To more accurately describe the intensity of the interactions between supramolecular dimers, we calculated the interaction energies of the dimers and introduced a non-halogenated isomer for comparison (Figure 5d–f). The results show that the energies of the three compounds were ΔE1 = −93.16 kJ/mol (Zn-3,5-Cl-saldmpn), ΔE2 = −100.56 kJ/mol, and ΔE3 = −56.15 kJ/mol, revealing that the dimer energy of the halogenated compounds was much higher than that of the non-halogenated derivative. These results suggested that halogen substitution not only changed the arrangement of molecules but also increased the interaction energy between neighboring molecules. Meanwhile, combined with the experimental results, the higher interaction energy implied a stronger and “long-range” interaction process between the probe molecules, which not only increased the degree of molecular aggregation but also resulted in a broader response range of the detection environment.

2.5. Stability, Anti-Interference and Reversibility

Stability is a key indicator for probes in practical applications [52]. Therefore, we evaluated the stability of the three Schiff base complexes by measuring the fluorescence intensity at different time intervals. The fluorescence intensity of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn remained stable and unchanged over 15 days under pH values of 7.0 and 5.0 (Figure 6), suggesting a good stability of the reported halogenated compounds. However, the comparison result of Zn-saldmpn was unsatisfactory (Figure 6c). Under the pH 7.0 condition, the intensity began to decrease after 4 days; in the acidic environment (pH = 5.0), an obvious fluctuation in fluorescence intensity occurred after only 1 day. After 7 days, its fluorescence intensity at pH values of 7.0 and 5.0 almost overlapped, and visible precipitation formed in the solution (Figure 6c), indicating that the stability of the Zn-saldmpn probe molecules was poor, and even minor changes in the external environment could significantly impact the molecular state.
In order to evaluate the anti-interference ability of the probe, we studied the fluorescence response of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn to common interferents, including common metal ions and anions. As shown in Figure 4e, Figure 6d and Figure S15, the fluorescence spectra of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn remained constant in the presence of these interferents. In contrast, when the pH changed to 5.0, the fluorescence intensity of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn decreased significantly. These results indicated that the halogen-modulated Schiff base probes were only sensitive to pH and were not affected by common interferents.
Reversibility is another important indicator of pH probes. Therefore, the fluorescence intensities of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn were measured under alternate acidic and alkaline environments. We adjusted the pH environment of the probe using two solutions with pH = 3.0 and pH = 11.0, respectively, and measured the fluorescence intensity (Videos S1 and S2).
The experimental results (Figure 7a) showed that Zn-3,5-Cl-saldmpn exhibited high fluorescence at pH 7.0, and the fluorescence was quenched after adding acidic solutions, but quickly recovered after adding basic solutions. The reversibility of the fluorescence intensity could be repeated more than 20 times (Figure 7c), and Zn-3,5-Br-saldmpn exhibited a similar phenomenon (Figure S16a,b). However, due to the low signal-to-noise ratio and poor stability of Zn-saldmpn, it was unable to exhibit the reversible behavior of the non-halogenated analogs (Figure 7b and Figure S16c and Video S3). These experimental results indicated that the halogen-regulated Schiff base probes had excellent reversible response performance and could achieve the real-time and accurate monitoring of pH changes.

2.6. Colorimetric Sensing Test Strip and Smartphone Visual Detection Based on Zn-3,5-Cl-Saldmpn

By visually observing the fluorescence intensity of the probe test paper, it was found that as the pH value increased, the color of the fluorescence gradually changed from black to blue, and the fluorescence intensity was enhanced accordingly (Figure S17). Although the results can be analyzed by visual colorimetric comparison, this method relies on the human ability to discern colors, resulting in significant uncertainties in accuracy and sensitivity [53]. In order to explore quick and easy real-time colorimetric pH sensing via Zn-3,5-Cl-saldmpn, image studies based on mobile phone imaging systems were carried out since this type of device is portable and could greatly simplify the experimental procedure and reduce detection cost.
To achieve this, the values of RGB were extracted through a color analysis app on a mobile phone and plotted against the pH value. With increasing pH, the color gradually changed from black to blue, resulting in a significant increase in blue color, by which the pH value could be quantitatively calculated. Slope fitting was performed based on the blue channel (Figure S18), R2 was 0.995, and the fitting formula could be used to precisely calculate the pH value of an unknown solution via the imaging system from the blue channel value.

3. Materials and Methods

3.1. Materials and Instruments

All reagents and chemicals used in the experiments were of analytical reagent (AR) grade. The N′, N-bis(3-aminopropyl) methylamine (98%), 3,5-dichlorosalicylaldehyde (98%), 3,5-dibromosalicylaldehyde (98%), salicylaldehyde (97%), zinc chloride (Zn2+, Cl−, 99%), nickel sulfate (Ni2+, SO42−, 98%), cupric acetate (Cu2+, Ac−, 99%), aluminum carbonate (Al3+, CO32−, 99%), magnesium perchlorate (Mg2+, ClO4−, 99%), cobalt nitrate(Co2+, NO3−, 99%), sodium thiocyanate (Na+, SCN−, 98.5%), cerium nitrate (Ce3+, 99%), europium chloride (Eu3+, 99.9%), calcium fluoride (Ca2+, F−, 99.5%), potassium bromide (K+, Br−, 99%), manganese acetate (Mn2+, 99%), titanium tetrachloride (Ti4+, 99%), iron nitrate (Fe3+, 98.5%), strontium chloride (Sr2+, 99.5%), silver nitrate (Ag+, 99%), and chromium nitrate (Cr3+, 99%) were purchased from Aladdin Reagent Co., Ltd. (Shanghai, China). The ethanol (EtOH, 99.7%) was purchased from Tianjin Damao Company. Throughout the experimental process, ultrapure water was used; all reagents were used without further purification.
UV–vis absorption spectra were recorded by a SHIMADZU UV-2450 (Kyoto, Japan). Fourier transform infrared spectra were recorded at a scan range of 4000–400 cm−1 with a resolution of 4 cm−1, and conventional KBr detected the samples on a Thermo Scientific Nicolay 6700 DTSG-KBr detector (Thermal Sciences, Saint Louis, MO, USA). For the method of particle size measurement, a Mastersizer 3000 (UK) dynamic laser scattering (DLS) method was used to detect the particle size change of the molecules in solvents with different pHs. Fluorescence spectra, fluorescence lifetimes, and absolute PL quantum yields were measured by an Edinburgh FS5 fluorescence spectrometer (Livingston, UK). Single-crystal data for the reported compounds were collected at a low temperature (100 K) and by a Bruker APEX-II CCD diffractometer (Billerica, MA, USA) equipped with a CCD detector (Bruker) using graphite monochromatic MoKα radiation (λ = 0.71073 Å). For the measurements, ShelXT was invoked using the program Olex2, the structure was solved by the direct method, and the remaining atoms were solved from successive difference Fourier synthesis. The software calculated the positions of hydrogen atoms connected to salicylaldehyde and amine groups. All non-hydrogen atoms were anisotropically refined. All fluorescence photos were collected under a 365 nm UV lamp using a smartphone (Oppo Reno 8 Pro) in a dark box utilizing a ZF-1 UV lamp (Jiapeng Technology Co., Ltd., Shanghai, China). The pH values of all solutions were precisely measured with a Denver UB–7 digital pH meter.

3.2. pH Measurements

The pH measurements of Zn-3,5-Cl-saldmpn, Zn-3,5-Br-saldmpn and Zn-saldmpn were studied by using HCl or NaOH in an ethanol/water mixture (20:1, v/v). The ethanol solutions of HCl and NaOH were added to the solution of Zn-3,5-Cl-saldmpn (c = 400 µM), respectively. The fluorescence emission spectra of the solutions were measured at every pH unit (Zn-3,5-Cl-saldmpn: λex = 380 nm; Zn-3,5-Br-saldmpn: λex = 370 nm; Zn-saldmpn: λex = 355 nm).

3.3. Measurements of Fluorescence Lifetime

The preparation of the solution was exactly the same as for the pH measurements. The fluorescence lifetimes of Zn-3,5-Cl-saldmpn, Zn-3,5-Br-saldmpn and Zn-saldmpn at different pHs (5.0, 6.0, 7.0) were measured by Edinburgh FS5. Excitation at 380 nm was achieved using a picosecond pulsed diode laser (Edinburgh instruments, EPL-380) at a repetition rate of 100 Hz, the channel was 1024 (time/ch: 0.05 ns), the time range was 20 ns, the peak counts were 1000, and the monochromator bandwidth was 1.5 nm. The measured decay curve was fitted by Origin, the fitting function was ExpDecay, and the fitting order was 2.

3.4. Anti-Interference Experiment

First, the prepared Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn solutions were diluted to 400 µM and shaken at room temperature for 10 s to ensure thorough mixing. Then, different kinds of interferents were added, mixed with Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn, and the fluorescence spectrum was immediately measured (Zn-3,5-Cl-saldmpn: λex = 380 nm; Zn-3,5-Br-saldmpn: λex = 370 nm).

3.5. Stability and Reversibility

Ethanol/water solutions (20:1, v/v) (c = 400 µM) of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn were prepared. The pH value was regulated between acidic and alkaline using aqueous HCl (1 × 105 µM) and NaOH (1 × 105 µM) solutions. In addition, samples of the same concentration (c = 400 µM) of pH 5.0 and 7.0 were exposed to daylight, and their fluorescence intensity measurements were taken at regular intervals (Zn-3,5-Cl-saldmpn: λex = 380 nm; Zn-3,5-Br-saldmpn: λex = 370 nm; Zn-saldmpn: λex = 355 nm).

3.6. Preparation of Sensing Filter Paper

A circular filter paper with a radius of 4 cm was soaked in Zn-3,5-Cl-saldmpn solution with a concentration of 1 × 10−2 mmol/mL for one day to ensure that the solute could be absorbed on the surface and evenly dispersed in the pores of the filter paper, and then it was removed with tweezers, placed in a beaker, and dried in an oven at 105 °C for 20 min to obtain a fluorescence-sensing filter paper. The prepared filter paper was placed under a 365 nm ultraviolet lamp, dropped into ethanol with different pH values (5.0–7.0) solution (5 μL), and then visually observed in the dark.

3.7. Computational Methods

Previous studies have indicated that the B3LYP method is able to achieve satisfactory results in explaining the reaction mechanism and reactivity of Schiff base complexes [54]. Therefore, in this work the DFT method based on the standard 6-311 + G(d,p) basis set was employed to obtain and probe the relationship between molecular orbitals and bonding energies [49]. All calculations were carried out using Gaussian 16W [55].

4. Conclusions

In summary, we designed and synthesized two different halogenated Schiff base complexes (Zn-3,5-Cl-saldmpn, Zn-3,5-Br-saldmpn) and systematically compared the photophysical properties with non-halogenated analogous (Zn-saldmpn). According to the experimental results, the halogen-regulated Schiff base fluorescence probe not only showed excellent stability, selectivity, and reversibility, but also exhibited a high signal-to-noise ratio when the pH dropped from 7.0 to 5.0. The signal-to-noise ratios of Zn-3,5-Cl-saldmpn and Zn-3,5-Br-saldmpn were 12.2 and 6.7, respectively, while the signal-to-noise ratio of the non-halogenated Schiff base complex was only 1.7. Furthermore, theoretical studies have shown that the introduction of halogen atoms can not only control the surface charge distribution of the benzene ring, improve molecular conjugation, and increase intermolecular interactions, but also form more non-radiative pathways. Moreover, the introduction of halogen atoms can also change the packing arrangement of the probes, increasing the interaction energy between adjacent molecules and increasing the degree of the aggregation state. Theoretical studies have also been further supported by experimental data, including dynamic light scattering (DLS), scanning electron microscopy (SEM), and the Tyndall Effect. Our research, to some extent, can provide new guidance for the design and synthesis of new probes and is expected to enhance the SNR of reported probes.

Supplementary Materials

The supporting information are available online at https://www.mdpi.com/article/10.3390/ijms24119480/s1.

Author Contributions

Methodology, Q.W., J.X., M.H. and R.D.; Investigation, H.P., J.X. and M.H.; Resources, Q.W., J.X. and R.D.; Software, Conceptualization, Q.W. and L.J.; Formal analysis, M.H. and Q.W.; Validation, Q.W. and J.X.; Supervision, H.P. and Q.W.; Writing-original draft preparation, Q.W., J.X. and L.J.; Project administration, J.X. and Q.W.; Visualization, J.X. and Q.W. Writing-review and editing, Q.W., J.X., L.J. and X.W.; Funding acquisition, Q.W. and J.X. All authors have read and agreed to the published version of the manuscript.

Funding

The authors thank the Program for Innovative Research Team (in Science and Technology) in Universities of Yunnan Province (IRTSTYN), the Recruitment Program of Yunnan Province Experts Provincial Young Talents (2019HB098), the Ten-Thousand Talents Program of Yunnan Province (YNWR-QNBJ-2018-273), Project of Yunnan Key Laboratory of Metal-Organic Molecular Materials and Device (YNMOMD2204), the Featured Research Team of Kunming University: Green Energy Conversion and Storage Team Project and the Scientific Research Fund of Yunnan Provincial Department of Education (2022Y758) for financial support.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Not applicable.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Hou, J.-T.; Ren, W.X.; Li, K.; Seo, J.; Sharma, A.; Yu, X.-Q.; Kim, J.S. Fluorescent bioimaging of pH: From design to applications. Chem. Soc. Rev. 2017, 46, 2076–2090. [Google Scholar] [CrossRef] [PubMed]
  2. Zhu, H.; Fan, J.; Du, J.; Peng, X. Fluorescent Probes for Sensing and Imaging within Specific Cellular Organelles. Acc. Chem. Res. 2016, 49, 2115–2126. [Google Scholar] [CrossRef] [PubMed]
  3. Wang, S.; Ren, W.X.; Hou, J.-T.; Won, M.; An, J.; Chen, X.; Shu, J.; Kim, J.S. Fluorescence imaging of pathophysiological microenvironments. Chem. Soc. Rev. 2021, 50, 8887–8902. [Google Scholar] [CrossRef]
  4. Yang, L.; Liu, Y.; Yue, M.; Li, P.; Liu, Y.; Ye, F.; Fu, Y. A Multifunctional and Fast-Response Lysosome-Targetable Fluorescent Probe for Monitoring pH and Isoxaflutole. Int. J. Mol. Sci. 2022, 23, 6256. [Google Scholar] [CrossRef] [PubMed]
  5. Tang, B.; Yu, F.; Li, P.; Tong, L.; Duan, X.; Xie, T.; Wang, X. A Near-Infrared Neutral pH Fluorescent Probe for Monitoring Minor pH Changes: Imaging in Living HepG2 and HL-7702 Cells. J. Am. Chem. Soc. 2009, 131, 3016–3023. [Google Scholar] [CrossRef]
  6. Titao, J.; Lifeng, Y. pH-Triggered Disaggregation-Induced Emission (DIE) probe for sensoring minor-pH changes in near infrared fluorescence region. Talanta 2017, 170, 185–192. [Google Scholar]
  7. Gumz, H.; Lai, T.H.; Voit, B.; Appelhans, D. Fine-tuning the pH response of polymersomes for mimicking and controlling the cell membrane functionality. Polym. Chem. 2017, 8, 2904–2908. [Google Scholar] [CrossRef]
  8. Li, G.; Pei, M.; Liu, P. DOX-conjugated CQD-based nanosponges for tumor intracellular pH-triggered DOX release and imaging. Colloids Surf. A Physicochem. Eng. Asp. 2020, 603, 125258. [Google Scholar] [CrossRef]
  9. Steinegger, A.; Wolfbeis, O.S.; Borisov, S.M. Optical Sensing and Imaging of pH Values: Spectroscopies, Materials, and Applications. Chem. Rev. 2020, 120, 12357–12489. [Google Scholar] [CrossRef]
  10. Liu, H.-L.; Zhan, K.; Zhong, K.-L.; Chen, X.-L.; Xia, X.-H. A Novel Indole Derivative with Superior Photophysical Performance for Fluorescent Probe, pH-Sensing, and Logic Gates. Int. J. Mol. Sci. 2023, 24, 1711. [Google Scholar] [CrossRef]
  11. Zhu, M.; Xing, P.; Zhou, Y.; Gong, L.; Zhang, J.; Qi, D.; Bian, Y.; Du, H.; Jiang, J. Lysosome-targeting ratiometric fluorescent pH probes based on long-wavelength BODIPY. J. Mater. Chem. B 2018, 6, 4422–4426. [Google Scholar] [CrossRef] [PubMed]
  12. Zhang, X.; du Rietz, A.; Hu, J.; Brommesson, C.; Wu, X.; Uvdal, K.; Hu, Z. A ratiometric fluorogenic nanoprobe for real-time quantitative monitoring of lysosomal pH. Sens. Actuators B Chem. 2021, 345, 130350. [Google Scholar] [CrossRef]
  13. Shen, S.-L.; Zhang, X.-F.; Bai, S.-Y.; Miao, J.-Y.; Zhao, B.-X. A novel ratiometric pH probe for extreme acidity based on FRET and PET. RSC Adv. 2015, 5, 13341–13346. [Google Scholar] [CrossRef]
  14. Huang, L.; Chen, Y.; Liang, B.; Xing, B.; Wen, G.; Wang, S.; Yue, X.; Zhu, C.; Du, J.; Bu, X. A furanyl acryl conjugated coumarin as an efficient inhibitor and a highly selective off–on fluorescent probe for covalent labelling of thioredoxin reductase. Chem. Commun. 2014, 50, 6987–6990. [Google Scholar] [CrossRef]
  15. Li, T.; Pang, H.; Wu, Q.; Huang, M.; Xu, J.; Zheng, L.; Wang, B.; Qiao, Y. Rigid Schiff Base Complex Supermolecular Aggregates as a High-Performance pH Probe: Study on the Enhancement of the Aggregation-Caused Quenching (ACQ) Effect via the Substitution of Halogen Atoms. Int. J. Mol. Sci. 2022, 23, 6259. [Google Scholar] [CrossRef]
  16. Shi, M.W.; Thomas, S.P.; Koutsantonis, G.A.; Spackman, M.A. Supramolecular Recognition and Energy Frameworks in Host–Guest Complexes of 18-Crown-6 and Sulfonamides. Cryst. Growth Des. 2015, 15, 5892–5900. [Google Scholar] [CrossRef]
  17. Wang, M.; Li, Q.; Li, E.; Liu, J.; Zhou, J.; Huang, F. Vapochromic Behaviors of A Solid-State Supramolecular Polymer Based on Exo-Wall Complexation of Perethylated Pillar[5]arene with 1,2,4,5-Tetracyanobenzene. Angew. Chem. Int. Ed. 2021, 133, 8196–8201. [Google Scholar] [CrossRef]
  18. Slater, A.G.; Perdigão, L.M.A.; Beton, P.H.; Champness, N.R. Surface-Based Supramolecular Chemistry Using Hydrogen Bonds. Acc. Chem. Res. 2014, 47, 3417–3427. [Google Scholar] [CrossRef]
  19. Huang, F.; Anslyn, E.V. Introduction: Supramolecular Chemistry. Chem. Rev. 2015, 115, 6999–7000. [Google Scholar] [CrossRef]
  20. Xu, J.; Huang, M.; Li, T.; Pang, H.; Ma, X.; Xu, X.; Jiao, L.; Tian, H.; Duan, R.; Yu, G.; et al. Halogen atoms induced reversible supramolecular assembly and pH-response of the fluorescence properties: Low driving force triggered fluorescence switch with high SNR and high stability. J. Mol. Struct. 2022, 1265, 133319. [Google Scholar] [CrossRef]
  21. Thomas, S.W.; Joly, G.D.; Swager, T.M. Chemical sensors based on amplifying fluorescent conjugated polymers. Chem. Rev. 2007, 107, 1339–1386. [Google Scholar] [CrossRef] [PubMed]
  22. Metrangolo, P.; Meyer, F.; Pilati, T.; Resnati, G.; Terraneo, G. Halogen bonding in supramolecular chemistry. Angew. Chem. Int. Ed. 2008, 47, 6114–6127. [Google Scholar] [CrossRef] [PubMed]
  23. Inscoe, B.; Rathnayake, H.; Mo, Y. Role of Charge Transfer in Halogen Bonding. J. Phys. Chem. A 2021, 125, 2944–2953. [Google Scholar] [CrossRef] [PubMed]
  24. Khanifaev, J.; Peköz, R.; Konuk, M.; Durgun, E. The interaction of halogen atoms and molecules with borophene. Phys. Chem. Chem. Phys. 2017, 19, 28963–28969. [Google Scholar] [CrossRef]
  25. Jiménez-Grávalos, F.; Gallegos, M.; Pendás, M.; Novikov, A.S. Challenging the electrostatic σ -hole picture of halogen bonding using minimal models and the interacting quantum atoms approach. J. Comput. Chem. 2021, 42, 676–687. [Google Scholar] [CrossRef]
  26. Freire, C.; Nunes, M.; Pereira, C.; Fernandes, D.M.; Peixoto, A.F.; Rocha, M. Metallo(salen) complexes as versatile building blocks for the fabrication of molecular materials and devices with tuned properties. Coord. Chem. Rev. 2019, 394, 104–134. [Google Scholar] [CrossRef]
  27. Tzubery, A.; Melamed-Book, N.; Tshuva, E.Y. Fluorescent antitumor titanium(iv) salen complexes for cell imaging. Dalton Trans. 2018, 47, 3669–3673. [Google Scholar] [CrossRef]
  28. Jiajun, X.; Dan, N.; Haijun, P.; Meifeng, H.; Qiuling, Y.; Jiao, Y.; Qiong, W. Halogenated Schiff base complexes: A new type of molecular probe for specific detection of o-Nitrophenol. J. Mol. Struct. 2023, 1285, 135440. [Google Scholar]
  29. Sharma, S.K.; Kaur, N.; Singh, J.; Singh, A.; Raj, P.; Sankar, S.; Kim, D.Y.; Singh, N.; Kaur, N.; Singh, H. Salen decorated nanostructured ZnO chemosensor for the detection of mercuric ions (Hg2+). Sens. Actuators B Chem. 2016, 232, 712–721. [Google Scholar] [CrossRef]
  30. Eunice, Y.L.H.; Dillon, W.P.T.; Jean-Alexandre, R.; Zuzana, P.; Kevin, R.; Anthony, R.; Yee Hwee, L. Structural investigation of Fe(III)-salen complexes as “turn-on” fluorogenic probes for selective detection of pyrophosphate ions. Dye. Pigment. 2022, 207, 110708. [Google Scholar]
  31. Tai, X.S.; Feng, Y.M.; Zhang, H.X. 2,2′-[4-Methyl-4-aza-heptane-1,7-diylbis(nitrilo-methyl-idyne)]diphenolatozinc(II). Acta Cryst. Sect. E Struct. Rep. Online 2008, 64 Pt 3, m502. [Google Scholar] [CrossRef]
  32. Zhang, Y.; Zhao, Y.; Wu, Y.; Zhao, B.; Wang, L.; Song, B. Hemicyanine based naked-eye ratiometric fluorescent probe for monitoring lysosomal pH and its application. Spectrochim. Acta Part A Mol. Biomol. Spectrosc. 2019, 227, 117767. [Google Scholar] [CrossRef] [PubMed]
  33. Fang, M.; Adhikari, R.; Bi, J.; Mazi, W.; Dorh, N.; Wang, J.; Conner, N.; Ainsley, J.; Karabencheva-Christova, T.G.; Luo, F.-T.; et al. Fluorescent probes for sensitive and selective detection of pH changes in live cells in visible and near-infrared channels. J. Mater. Chem. B 2017, 5, 9579–9590. [Google Scholar] [CrossRef] [PubMed]
  34. Choudhary, A.; Das, B.; Ray, S. Encapsulation of a Ni salen complex in zeolite Y: An experimental and DFT study. Dalton Trans. 2015, 44, 3753–3763. [Google Scholar] [CrossRef] [PubMed]
  35. Tong, X.; Zhao, X.; Qiu, Y.; Wang, H.; Liao, Y.; Xie, X. Intrinsically Visible Light-Responsive Liquid Crystalline Physical Gels Driven by a Halogen Bond. Langmuir 2020, 36, 11873–11879. [Google Scholar] [CrossRef] [PubMed]
  36. Wang, L.; Qin, Y.; Cheng, Y.; Fan, W.; Yang, S.; Zheng, L.; Cao, Q. Intermolecular hydrogen bonds induce restriction of access to the dark state for triggering aggregation-induced emission. J. Mater. Chem. C 2022, 10, 5356–5363. [Google Scholar] [CrossRef]
  37. Fang, Y.; Wang, J.; Zhang, L.; Niu, G.; Sui, L.; Wu, G.; Yuan, K.; Wang, K.; Zou, B. Tailoring the high-brightness “warm” white light emission of two-dimensional perovskite crystals via a pressure-inhibited nonradiative transition. Chem. Sci. 2023, 14, 2652–2658. [Google Scholar] [CrossRef]
  38. Luo, Y.; Fu, C.; Chen, Z.; Hu, J.; Xu, Z.; Tang, D. Influence of restricted rotation of small-sized substituent on phosphorescence efficiency for Pt(II) complexes: A theoretical investigation. Org. Electron. 2018, 61, 25–34. [Google Scholar] [CrossRef]
  39. Huang, T.; Song, X.; Cai, M.; Zhang, D.; Duan, L. Improving reverse intersystem crossing in exciplex-forming hosts by introducing heavy atom effect. Mater. Today Energy 2021, 21, 100705. [Google Scholar] [CrossRef]
  40. Zuping, X.; Wenqi, G.; Pengfei, X.; Mengyi, J.; Xuting, C.; Yuqing, Z.; Xinni, P.; Hui, F.; Huili, M.; Zhaosheng, Q. Reexamining the Heavy-Atom-Effect: The Universal Heavy-Atom-Induced Fluorescence Enhancement Principle for Through-Space Conjugated AIEgens. Chem. Eng. J. 2022, 451, 139030. [Google Scholar]
  41. Qi, J.; Hu, X.; Dong, X.; Lu, Y.; Lu, H.; Zhao, W.; Wu, W. Towards more accurate bioimaging of drug nanocarriers: Turning aggregation-caused quenching into a useful tool. Adv. Drug Deliv. Rev. 2019, 143, 206–225. [Google Scholar] [CrossRef] [PubMed]
  42. Li, P.; Zhang, D.; Zhang, Y.; Lu, W.; Zhang, J.; Wang, W.; He, Q.; Théato, P.; Chen, T. Aggregation-Caused Quenching-Type Naphthalimide Fluorophores Grafted and Ionized in a 3D Polymeric Hydrogel Network for Highly Fluorescent and Locally Tunable Emission. ACS Macro Lett. 2019, 8, 937–942. [Google Scholar] [CrossRef] [PubMed]
  43. Zhang, Y.-J.; Yang, Y.; Wang, J.-M.; Liang, W.-B.; Yuan, R.; Xiao, D.-R. Electrochemiluminescence enhanced by isolating ACQphores in pyrene-based porous organic polymer: A novel ECL emitter for the construction of biosensing platform. Anal. Chim. Acta 2022, 1206, 339648. [Google Scholar] [CrossRef] [PubMed]
  44. Sun, Y.; Yuan, K.; Mo, X.; Chen, X.; Deng, Y.; Liu, C.; Yuan, Y.; Nie, J.; Zhang, Y. Tyndall-Effect-inspired assay with gold nanoparticles for the colorimetric discrimination and quantification of mercury ions and glutathione. Talanta 2021, 238, 122999. [Google Scholar] [CrossRef] [PubMed]
  45. Su, M.; Liu, C.; Zhang, Y.; Rong, X.; Wang, X.; Li, X.; Wang, K.; Zhu, H.; Zhu, B. Rational design of a water-soluble TICT-AIEE-active fluorescent probe for mercury ion detection. Anal. Chim. Acta 2022, 1230, 340337. [Google Scholar] [CrossRef]
  46. Zhang, X.; Wang, J.; Liu, Y.; Hao, Y.; Yu, F.; Li, D.; Huang, X.; Yu, L.; Wang, T.; Hao, H. Tunable Emission of Organic Fluorescent Crystals through Polymorphic Manipulation. J. Phys. Chem. C 2021, 125, 6189–6199. [Google Scholar] [CrossRef]
  47. Varghese, S.; Das, S. Role of Molecular Packing in Determining Solid-State Optical Properties of π-Conjugated Materials. J. Phys. Chem. Lett. 2011, 2, 863–873. [Google Scholar] [CrossRef]
  48. Addison, A.W.; Rao, T.N.; Reedijk, J.; van Rijn, J.; Verschoor, G.C. Synthesis, structure, and spectroscopic properties of copper(II) compounds containing nitrogen–sulphur donor ligands; the crystal and molecular structure of aqua[1,7-bis(N-methylbenzimidazol-2′-yl)-2,6-dithiaheptane]copper(II) perchlorate. J. Chem. Soc. Dalton Trans. 1984, 7, 1349–1356. [Google Scholar] [CrossRef]
  49. Clark, T.; Chandrasekhar, J.; Spitznagel, G.W.; Schleyer, P.V.R. Efficient diffuse function-augmented basis sets for anion calculations. III. The 3-21+G basis set for first-row elements, Li-F. J. Comput. Chem. 1983, 4, 294–301. [Google Scholar] [CrossRef]
  50. Dimitriev, O.P.; Piryatinski, Y.P.; Slominskii, Y.L. Excimer Emission in J-Aggregates. J. Phys. Chem. Lett. 2018, 9, 2138–2143. [Google Scholar] [CrossRef]
  51. Hecht, M.; Würthner, F. Supramolecularly Engineered J-Aggregates Based on Perylene Bisimide Dyes. Acc. Chem. Res. 2020, 54, 642–653. [Google Scholar] [CrossRef] [PubMed]
  52. Niu, Q.; Sun, T.; Li, T.; Guo, Z.; Pang, H. Highly sensitive and selective colorimetric/fluorescent probe with aggregation induced emission characteristics for multiple targets of copper, zinc and cyanide ions sensing and its practical application in water and food samples. Sens. Actuators B Chem. 2018, 266, 730–743. [Google Scholar] [CrossRef]
  53. Basak, M.; Das, G. Amine-incorporated quinoxaline based fluorescent sensor for detection of trace water: Solvent influenced self-assembly. Spectrochim. Acta Part A Mol. Biomol. Spectrosc. 2022, 280, 121521. [Google Scholar] [CrossRef]
  54. Salihović, M.; Pazalja, M.; Špirtović Halilović, S.; Veljović, E.; Mahmutović-Dizdarević, I.; Roca, S.; Novaković, I.; Trifunović, S. Synthesis, characterization, antimicrobial activity and DFT study of some novel Schiff bases. J. Mol. Struct. 2021, 1241, 130670. [Google Scholar]
  55. Frisch, M.e.; Trucks, G.; Schlegel, H.B.; Scuseria, G.; Robb, M.; Cheeseman, J.; Scalmani, G.; Barone, V.; Petersson, G.; Nakatsuji, H. Gaussian 16; Gaussian, Inc.: Wallingford, CT, USA, 2016. [Google Scholar]
Ijms 24 09480 sch001 550
Scheme 1. The synthesis route of Zn-3,5-Cl-saldmpn (R1), Zn-3,5-Br-saldmpn (R2) and Zn-saldmpn (R3).
Scheme 1. The synthesis route of Zn-3,5-Cl-saldmpn (R1), Zn-3,5-Br-saldmpn (R2) and Zn-saldmpn (R3).
Ijms 24 09480 sch001
Ijms 24 09480 g001 550
Figure 1. Emission spectra of (a) Zn-3,5-Cl-saldmpn and (b) Zn-3,5-Br-saldmpn at different pH values (Zn-3,5-Cl-saldmpn: λex = 380 nm; Zn-3,5-Br-saldmpn: λex = 370 nm). The linear relationship between the fluorescence intensity and pH values (5.0–7.0) of (c) Zn-3,5-Cl-saldmpn and (d) Zn-3,5-Br-saldmpn. Fluorescence photos of (e) Zn-3,5-Cl-saldmpn and (f) Zn-3,5-Br-saldmpn at different pH values (5.0–7.0) under 365 nm UV light.
Figure 1. Emission spectra of (a) Zn-3,5-Cl-saldmpn and (b) Zn-3,5-Br-saldmpn at different pH values (Zn-3,5-Cl-saldmpn: λex = 380 nm; Zn-3,5-Br-saldmpn: λex = 370 nm). The linear relationship between the fluorescence intensity and pH values (5.0–7.0) of (c) Zn-3,5-Cl-saldmpn and (d) Zn-3,5-Br-saldmpn. Fluorescence photos of (e) Zn-3,5-Cl-saldmpn and (f) Zn-3,5-Br-saldmpn at different pH values (5.0–7.0) under 365 nm UV light.
Ijms 24 09480 g001
Ijms 24 09480 g002 550
Figure 2. Absorption spectra of (a) Zn-3,5-Cl-saldmpn, (b) Zn-3,5-Br-saldmpn and (c) Zn-saldmpn at different pH values (5.0–7.0) (Inset: photographs at pH 5.0 and 7.0 under natural light).
Figure 2. Absorption spectra of (a) Zn-3,5-Cl-saldmpn, (b) Zn-3,5-Br-saldmpn and (c) Zn-saldmpn at different pH values (5.0–7.0) (Inset: photographs at pH 5.0 and 7.0 under natural light).
Ijms 24 09480 g002
Ijms 24 09480 g003 550
Figure 3. (a) Images of Zn-3,5-Cl-saldmpn, Zn-3,5-Br-saldmpn and Zn-saldmpn in the solid state under daylight illumination and UV light illumination. (b) Schematic diagram of aggregation-caused quenching (ACQ). Particle size distribution of (c) Zn-3,5-Cl-saldmpn and (d) Zn-saldmpn at different pH values (7.0, 6.0 and 5.0) by dynamic light scattering (DLS) measurements in ethanol. SEM images of (e) Zn-3,5-Cl-saldmpn and (f) Zn-saldmpn at different pH values (7.0, 6.0 and 5.0).
Figure 3. (a) Images of Zn-3,5-Cl-saldmpn, Zn-3,5-Br-saldmpn and Zn-saldmpn in the solid state under daylight illumination and UV light illumination. (b) Schematic diagram of aggregation-caused quenching (ACQ). Particle size distribution of (c) Zn-3,5-Cl-saldmpn and (d) Zn-saldmpn at different pH values (7.0, 6.0 and 5.0) by dynamic light scattering (DLS) measurements in ethanol. SEM images of (e) Zn-3,5-Cl-saldmpn and (f) Zn-saldmpn at different pH values (7.0, 6.0 and 5.0).
Ijms 24 09480 g003
Ijms 24 09480 g004 550
Figure 4. (a) Ball-and-stick representation of the asymmetric unit of the trimeric aggregation Zn-3,5-Cl-saldmpn; (b) the coordination polyhedrons for Zn(1) and Zn(2); (c–e) the amplified region of interactions between Zn(1) and Zn(2).
Figure 4. (a) Ball-and-stick representation of the asymmetric unit of the trimeric aggregation Zn-3,5-Cl-saldmpn; (b) the coordination polyhedrons for Zn(1) and Zn(2); (c–e) the amplified region of interactions between Zn(1) and Zn(2).
Ijms 24 09480 g004
Ijms 24 09480 g005 550
Figure 5. Molecular orbital surfaces for the HOMO and LUMO of (a) Zn-3,5-Cl-saldmpn (b) Zn-3,5-Br-saldmpn (c) and Zn-saldmpn at B3LYP/6-311 +  G(d,p) level; illustration of the binding energy for the self-assembled dimer formed by (d) Zn-3,5-Cl-saldmpn, (e) Zn-3,5-Br-saldmpn and (f) Zn-saldmpn.
Figure 5. Molecular orbital surfaces for the HOMO and LUMO of (a) Zn-3,5-Cl-saldmpn (b) Zn-3,5-Br-saldmpn (c) and Zn-saldmpn at B3LYP/6-311 +  G(d,p) level; illustration of the binding energy for the self-assembled dimer formed by (d) Zn-3,5-Cl-saldmpn, (e) Zn-3,5-Br-saldmpn and (f) Zn-saldmpn.
Ijms 24 09480 g005
Ijms 24 09480 g006 550
Figure 6. Stability of (a) Zn-3,5-Cl-saldmpn and (b) Zn-3,5-Br-saldmpn under different pH values of 5.0 and 7.0 for 15 days (inset: color change at pH 5.0 and 7.0 after 15 days under natural light). Stability of (c) Zn-saldmpn under different pH values of 5.0 and 7.0 for 7 days (color change at pH 5.0 and 7.0 after 7 days under natural light). Interference experiment of different (d) metal ions and (e) anions on Zn-3,5-Cl-saldmpn (inset: corresponding fluorescence photographs of figures (d,e)).
Figure 6. Stability of (a) Zn-3,5-Cl-saldmpn and (b) Zn-3,5-Br-saldmpn under different pH values of 5.0 and 7.0 for 15 days (inset: color change at pH 5.0 and 7.0 after 15 days under natural light). Stability of (c) Zn-saldmpn under different pH values of 5.0 and 7.0 for 7 days (color change at pH 5.0 and 7.0 after 7 days under natural light). Interference experiment of different (d) metal ions and (e) anions on Zn-3,5-Cl-saldmpn (inset: corresponding fluorescence photographs of figures (d,e)).
Ijms 24 09480 g006
Ijms 24 09480 g007 550
Figure 7. The reversibility images of (a) Zn-3,5-Cl-saldmpn (extracted from Video S1) and (b) Zn-saldmpn (extracted from Video S3). (c) The reversible response of Zn-3,5-Cl-saldmpn between acidic and alkaline conditions (blue color channel extracted from images).
Figure 7. The reversibility images of (a) Zn-3,5-Cl-saldmpn (extracted from Video S1) and (b) Zn-saldmpn (extracted from Video S3). (c) The reversible response of Zn-3,5-Cl-saldmpn between acidic and alkaline conditions (blue color channel extracted from images).
Ijms 24 09480 g007
Table
Table 1. The photophysical parameters of Zn-3,5-Cl-saldmpn, Zn-3,5-Br-saldmpn and Zn-saldmpn. Φf = fluorescence quantum yield, τf = fluorescence lifetime, kr = radiative decay rate constant = Φf/τf and knr = non-radiative decay rate constant = (1 − Φf)/τf.
Table 1. The photophysical parameters of Zn-3,5-Cl-saldmpn, Zn-3,5-Br-saldmpn and Zn-saldmpn. Φf = fluorescence quantum yield, τf = fluorescence lifetime, kr = radiative decay rate constant = Φf/τf and knr = non-radiative decay rate constant = (1 − Φf)/τf.
MaterialspHτf (ns)Φf (%)kr (106 s−1)knr (106 s−1)
Zn-3,5-Cl-saldmpn5.01.654.426.7579.4
6.03.5610.328.9252.0
7.05.6819.434.2141.9
Zn-3,5-Br-saldmpn5.00.932.223.71051.6
6.00.993.232.3977.8
7.01.095.045.9871.6
Zn-saldmpn5.01.295.643.4731.8
6.01.939.046.6471.5
7.01.998.944.7457.8
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Xu, J.; Huang, M.; Jiao, L.; Pang, H.; Wang, X.; Duan, R.; Wu, Q. Supramolecular Dimer as High-Performance pH Probe: Study on the Fluorescence Properties of Halogenated Ligands in Rigid Schiff Base Complex. Int. J. Mol. Sci. 2023, 24, 9480. https://doi.org/10.3390/ijms24119480

AMA Style

Xu J, Huang M, Jiao L, Pang H, Wang X, Duan R, Wu Q. Supramolecular Dimer as High-Performance pH Probe: Study on the Fluorescence Properties of Halogenated Ligands in Rigid Schiff Base Complex. International Journal of Molecular Sciences. 2023; 24(11):9480. https://doi.org/10.3390/ijms24119480

Chicago/Turabian Style

Xu, Jiajun, Meifen Huang, Liang Jiao, Haijun Pang, Xia Wang, Rui Duan, and Qiong Wu. 2023. "Supramolecular Dimer as High-Performance pH Probe: Study on the Fluorescence Properties of Halogenated Ligands in Rigid Schiff Base Complex" International Journal of Molecular Sciences 24, no. 11: 9480. https://doi.org/10.3390/ijms24119480

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop