Next Article in Journal
Edge-Group Sparse Principal Component Thermography for Defect Detection in an Ancient Marquetry Sample
Previous Article in Journal
2D Materials in Infrared Detector Family
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Abstract

Source Parameter of Earthquakes in Talala, Gujarat (India): An Implication towards Seismotectonic †

by
Sandeep Kumar Aggarwal
Department of Applied Geophysics, Indian Institute of Technology (ISM), Dhanbad 826004, India
Presented at the 2nd International Electronic Conference on Geosciences, 8–15 June 2019; Available online: https://iecg2019.sciforum.net/.
Proceedings 2019, 24(1), 7; https://doi.org/10.3390/IECG2019-06223
Published: 13 June 2019
(This article belongs to the Proceedings of The 2nd International Electronic Conference on Geosciences)

Abstract

:
Talala is an excellent example of triggered neo-tectonic seismicity between two dams during a monsoon. An earthquake of Mmax 5.1 on 6 November 2007 at 21.16° N; 70.54° E, with a focal depth of 4.5 km and complete sequence, was first-time recorded on the latest broadband sensor. This found a dam/monsoon-induced earthquake preceded by 18 foreshocks of 2 ≤ Mw ≤ 4.8 within 9 h 11 minute, as well as smaller shocks that may not have been recorded because of sparse network coverage. After the deployment of local mobile observatories, aftershocks of Mw ≥ 1.0, which continued for months and subsided to background seismicity after four months, were recorded. The same kind of phenomena repeated, with Mmax 5.0 on 20 October 2011 at 21.06° N; 70.50° E, focal depth 5.5 km, which implies that the potential to generate dam/monsoon-induced seismicity took nearly four years again. These phenomena continued and the sequence was recorded by a network of 10 broadband seismographs (three in the Talala area and seven at an epicentral distance of 30 to 300 km). Centroid Moment Tensor (CMT) solutions and spectral source parameters of mainshock and aftershocks are evaluated to understand the seismotectonic of the region. The CMT depicts a major strike-slip motion along East North East-West South West with a left-lateral plane at 4.5 km depth. This indicates a sympathetic fault extension of the Son-Narmada fault. The source parameters of 400 shocks of Mw 1.0 to 5.1 found seismic moment 1011 to 1016.5 N-m, source radii 120–850 meter, and a stress drop of 0.003 to 25.43 Mpa. The b-value, p-value, fractal dimension, and slip on estimated different faults. The comparison between Talala and Koyna dam-induced source parameters tries to establish a comparison of seismicity from different parts of the world.

Share and Cite

MDPI and ACS Style

Aggarwal, S.K. Source Parameter of Earthquakes in Talala, Gujarat (India): An Implication towards Seismotectonic. Proceedings 2019, 24, 7. https://doi.org/10.3390/IECG2019-06223

AMA Style

Aggarwal SK. Source Parameter of Earthquakes in Talala, Gujarat (India): An Implication towards Seismotectonic. Proceedings. 2019; 24(1):7. https://doi.org/10.3390/IECG2019-06223

Chicago/Turabian Style

Aggarwal, Sandeep Kumar. 2019. "Source Parameter of Earthquakes in Talala, Gujarat (India): An Implication towards Seismotectonic" Proceedings 24, no. 1: 7. https://doi.org/10.3390/IECG2019-06223

Article Metrics

Back to TopTop