Designs

18 pages, 4670 KiB

Open AccessArticle

Colonial Architecture in Panama City. Analysis of the Heritage Value of Its Monastic Buildings

by Antonio Cubero Hernández and Silvia Arroyo Duarte

Designs 2020, 4(4), 57; https://doi.org/10.3390/designs4040057 - 21 Dec 2020

Cited by 2 | Viewed by 4493

The Historic District of Panama City was inscribed on the World Heritage List in 1997 for representing an exceptional example of 17th century colonial urban planning in the Americas. This article focuses on the specific analysis of the deteriorated monastic typology, highlighting its [...] Read more.

The Historic District of Panama City was inscribed on the World Heritage List in 1997 for representing an exceptional example of 17th century colonial urban planning in the Americas. This article focuses on the specific analysis of the deteriorated monastic typology, highlighting its historical role as an articulating piece of the original urban layout designed in 1673 after the transfer from Panamá Viejo to the current location and which continues today. Our methodology consisted of reviewing the different stages of each of these buildings, extracting common events, and identifying the examples of the greatest value loss, with the aim of enhancing and highlighting their historical footprint. This study includes approaches from urbanism, architectural history, and heritage preservation that allows us to discuss possible tools, either for protection or adaptative reuse, to avoid the deterioration of such important historical heritage. Full article

(This article belongs to the Special Issue On Contemporary Architectural Design and the Rehabilitation of Built Heritage)

► Show Figures

Figure 1

14 pages, 1820 KiB

Open AccessArticle

Design Mode Innovation of Local Color Cultures: A Case Study of the Traditional Female Costume of Yi Nationality

by Zhe Ji, Wei-Hsin Huang and Mengyi Lin

Designs 2020, 4(4), 56; https://doi.org/10.3390/designs4040056 - 17 Dec 2020

Cited by 5 | Viewed by 4129

Abstract

Color is a concrete expression of combining local features and traditional culture. The purpose of this study is to provide a new design method and intends, by taking the traditional costume of the Yi women in Liangshan, China, as an example, to establish [...] Read more.

Color is a concrete expression of combining local features and traditional culture. The purpose of this study is to provide a new design method and intends, by taking the traditional costume of the Yi women in Liangshan, China, as an example, to establish a systematic color scheme which can be used as a reference for the establishment of relevant color records for other cultural groups. First of all, through literature review, this study provides the definition of the traditional costume of the Yi women in Liangshan, color and culture and color images and clarifies the characteristics of research samples. Secondly, experts are invited to find out and record the color values of different colors on Yi women’s costume, and a software is resorted to in order to calculate the area ration of each color and analyze the color distribution principles of sample costume. Moreover, this study discusses the color images of Yi women’s costume, sorts out its unique color characteristics and establishes and verifies samples of color scheme through focus group interviews in order to analyze regional cultural colors. Finally, this study proposes a systematic approach for regional cultural color analysis, namely, understanding color characteristics, analyzing color images, establishing a color scheme and demonstrating color scheme principles. Through a systematic approach, these cultural colors are analyzed and organized to establish a regional cultural color scheme, which can not only retain the characteristics of the traditional cultural colors of Chinese ethnic groups’ costume but also serve as a reference for designers to develop regional cultural products. Full article

(This article belongs to the Special Issue Environmental Futures: Creative Explorations through Science, Engineering, Design, and Art)

► Show Figures

Figure 1

19 pages, 10302 KiB

Open AccessArticle

An Integrated Design Strategy for the Urban Regeneration of West Bay, Business District of Doha (State of Qatar)

by Sarah M. Al-Thani and Raffaello Furlan

Designs 2020, 4(4), 55; https://doi.org/10.3390/designs4040055 - 10 Dec 2020

Cited by 8 | Viewed by 5395

Abstract

Emergent communities have integrated land use and transportation plan based on transit-oriented developments (TODs) and light rail transit with the sole purpose to enliven and redevelop the constructed environment. Doha has undergone some major transformation in urban growth context due to surge in [...] Read more.

Emergent communities have integrated land use and transportation plan based on transit-oriented developments (TODs) and light rail transit with the sole purpose to enliven and redevelop the constructed environment. Doha has undergone some major transformation in urban growth context due to surge in the economy instigated by oil and gas production. It is noticed that the rapid growth has led to negative impacts in terms of urban design, connectivity, and transportation. It is essential to understand the impact of the TOD model with regards to the challenges and approaches in terms of planning procedures and tactics. The purpose of TOD module is to facilitate access for public transportation and to enable transit commutation which is a missing aspect in the current setting. TODs support and enable sustainable urbanism by revitalizing the livability through integration of land use schemes in the city. This paper focuses on bringing together TOD livability approaches within West Bay, the business district of Doha and its adjacent surroundings. The objective of this research is to assess the livability in West Bay with the implementation of the TOD model. The research findings help to revisit the design and application of TOD models and to enhance the livable conditions for its occupants. The finding suggests a design model based on livability, compactness, public realms, walkability, and accessibility. Full article

(This article belongs to the Special Issue Sustainable and Conventional Buildings)

► Show Figures

Figure 1

14 pages, 86447 KiB

Open AccessArticle

Multi-Camera-Based Person Recognition System for Autonomous Tractors

by Taek-Hoon Jung, Benjamin Cates, In-Kyo Choi, Sang-Heon Lee and Jong-Min Choi

Designs 2020, 4(4), 54; https://doi.org/10.3390/designs4040054 - 09 Dec 2020

Cited by 9 | Viewed by 3303

Abstract

Recently, the development of autonomous tractors is being carried out as an alternative to solving the labor shortage problem of agricultural workers due to an aging population and low birth rate. As the level of autonomous driving technology advances, tractor manufacturers should develop [...] Read more.

Recently, the development of autonomous tractors is being carried out as an alternative to solving the labor shortage problem of agricultural workers due to an aging population and low birth rate. As the level of autonomous driving technology advances, tractor manufacturers should develop technology with the safety of their customers as a top priority. In this paper, we suggest a person recognition system for the entire environment of the tractor using a four-channel camera mounted on the tractor and the NVIDIA Jetson Xavier platform. The four-channel frame synchronization and preprocessing were performed, and the methods of recognizing people in the agricultural environment were combined using the YOLO-v3 algorithm. Among the many objects provided by COCO dataset for learning the YOLO-v3 algorithm, only person objects were extracted and the network was learned. A total of 8602 image frames were collected at the LSMtron driving test field to measure the recognition performance of actual autonomous tractors. In the collected images, various postures of agricultural workers (ex. Parts of the body are obscured by crops, squatting, etc.) that may appear in the agricultural environment were required to be expressed. The person object labeling was performed manually for the collected test datasets. For this test dataset, a comparison of the person recognition performance of the standard YOLO-v3 (80 classes detect) and Our YOLO-v3 (only person detect) was performed. As a result, our system showed 88.43% precision and 86.19% recall. This was 0.71% higher precision and 2.3 fps faster than the standard YOLO-v3. This recognition performance was judged to be sufficient considering the working conditions of autonomous tractors. Full article

(This article belongs to the Special Issue Environmental Futures: Creative Explorations through Science, Engineering, Design, and Art)

► Show Figures

Figure 1

20 pages, 2789 KiB

Open AccessArticle

Bond Graph Modeling and Kalman Filter Observer Design for an Industrial Back-Support Exoskeleton

by Erfan Shojaei Barjuei, Darwin G. Caldwell and Jesús Ortiz

Designs 2020, 4(4), 53; https://doi.org/10.3390/designs4040053 - 04 Dec 2020

Cited by 16 | Viewed by 4012

Abstract

This paper presents a versatile approach to the synthesis and design of a bond graph model and a Kalman filter observer for an industrial back-support exoskeleton. Actually, the main purpose of developing a bond graph model is to investigate and understand better the [...] Read more.

This paper presents a versatile approach to the synthesis and design of a bond graph model and a Kalman filter observer for an industrial back-support exoskeleton. Actually, the main purpose of developing a bond graph model is to investigate and understand better the system dynamics. On the other hand, the design of the Kalman observer always should be based on a model providing an adequate description of the system dynamics; however, when back-support exoskeletons are considered, the synthesis of a state observer becomes very challenging, since only nonlinear models may be adopted to reproduce the system dynamic response with adequate accuracy. The dynamic modeling of the exoskeleton robotic platform, used in this work, comprises an electrical brushless DC motor, gearbox transmission, torque sensor and human trunk (biomechanical model). On this basis, a block diagram model of the dynamic system is presented and an experimental test has been carried out for identifying the system parameters accordingly. Both the block diagram and bond graph dynamic models are simulated via MATLAB and 20-sim software (bond graph simulation software) respectively. Furthermore, the possibility of employing the Kalman filter observer together with a suitable linear model is investigated. Subsequently, the performance of the proposed Kalman observer is evaluated in a lifting task scenario with the use of a linear quadratic regulator (LQR) controller with double integral action. Finally, the most important simulation results are presented and discussed. Full article

(This article belongs to the Special Issue Design and Control of Collaborative Robotic Solutions and Wearable Assistive Robots to Enhance Human Capabilities)

► Show Figures

Figure 1

13 pages, 791 KiB

Open AccessArticle

Wavelet Transforms of Diagnosable Signals from Ship Power Complexes in a MATLAB Environment

by Vladimir Sakharov, Sergei Chernyi, Sergey Saburov and Aleksandr Chertkov

Designs 2020, 4(4), 52; https://doi.org/10.3390/designs4040052 - 02 Dec 2020

Cited by 5 | Viewed by 2152

Abstract

The use of digital technologies in the systems of diagnostics and monitoring of units of a ship’s propulsion plant can significantly increase the efficiency and quality of assessing the technical condition of operated objects in the online mode as well as expand the [...] Read more.

The use of digital technologies in the systems of diagnostics and monitoring of units of a ship’s propulsion plant can significantly increase the efficiency and quality of assessing the technical condition of operated objects in the online mode as well as expand the class of practical problems to be solved. Digital processing of signals of complex configuration at a qualitatively new level is an indispensable condition for a critical improvement in the course of processing the current values of diagnosable parameters, increasing the reliability and trouble-free performance of a ship’s technical equipment during operation. A method of approximation has been discussed in the paper. Moreover, the paper provides an algorithm for analyzing the signal of the indicator diagram of a marine diesel engine, the spectrum of which contains high-frequency components and short-term pulses indicating deviations from the normal operating mode, the assessment of which is practically impossible with the traditionally applied methods of spectral analysis of signals. The approximation method is based on the use of wavelet analysis, which makes it possible to deeply explore such modes. Examples of using wavelet analysis to approximate one-dimensional signals of elements and systems of a ship’s power complexes are given. Full article

► Show Figures

Figure 1

16 pages, 7618 KiB

Open AccessArticle

Dual-Input Photovoltaic System Based on Parallel Z-Source Inverters

by Mahdi Shahparasti, Mehdi Savaghebi, Ebrahim Adabi and Thomas Ebel

Designs 2020, 4(4), 51; https://doi.org/10.3390/designs4040051 - 01 Dec 2020

Cited by 4 | Viewed by 2803

Abstract

This paper aims to present a new structure of the parallel Z-source inverters (ZSIs) for dual-input single-phase grid-connected photovoltaic (PV) systems. The ZSI is a single-stage buck-boost converter that uses an inductor-capacitor network between the inverter bridge and the PV string and follows [...] Read more.

This paper aims to present a new structure of the parallel Z-source inverters (ZSIs) for dual-input single-phase grid-connected photovoltaic (PV) systems. The ZSI is a single-stage buck-boost converter that uses an inductor-capacitor network between the inverter bridge and the PV string and follows the maximum power point by applying the shoot-through vector. Therefore, a DC/DC converter is no longer needed to track the maximum power point, and the cost and complexity of the power conditioning system (PCS) are reduced. For controlling the proposed PCS, a cascade control structure is employed in this paper. The inner current loop injects the maximum active power with unity power factor sinusoidal current to the grid. The outer capacitor voltage loop is applied to control capacitors voltages in the Z-source networks. Additionally, an enhanced dual-string maximum power point tracking (eDS-MPPT) method is proposed to find MPPs with minimum burden competitional. The eDS-MPPT does not need the PVs voltages measurements compared to other MPPT methods. The simulation results confirm the accuracy of the performance of the system. Full article

► Show Figures

Figure 1

24 pages, 9794 KiB

Open AccessEditor’s ChoiceArticle

The Economics of Classroom 3-D Printing of Open-Source Digital Designs of Learning Aids

by Nicole Gallup and Joshua M. Pearce

Designs 2020, 4(4), 50; https://doi.org/10.3390/designs4040050 - 29 Nov 2020

Cited by 5 | Viewed by 6026

Abstract

While schools struggle financially, capital for purchasing physical learning aids is often cut. To determine if costs could be reduced for learning aids, this study analyzed classroom-based distributed digital manufacturing using 3-D printing of open-source learning aid designs. Learning aid designs are analyzed [...] Read more.

While schools struggle financially, capital for purchasing physical learning aids is often cut. To determine if costs could be reduced for learning aids, this study analyzed classroom-based distributed digital manufacturing using 3-D printing of open-source learning aid designs. Learning aid designs are analyzed in detail for their economic viability considering printing and assembly costs with purchased components and compared to equivalent or inferior commercial products available on Amazon. The results show current open-source 3-D printers are capable of manufacturing useful learning aids and that doing so provides high economic savings in the classroom. Overall, the average learning aid would save teachers 86% when fabricating it themselves. The results show that the average design evaluated was downloaded over 1,500 times and the average savings per year per open-source learning aid design was USD 11,822. To date, the 38 learning aid designs evaluated in this study saved over USD 45,000 each and the total of all of them saved the international educational community over USD 1.7 million. It is clear that investing in the development of open-source learning aids for students provides a return on investment (ROI) for investors hoping to improve education, on average, of more than 100%. Full article

► Show Figures

Graphical abstract

16 pages, 2507 KiB

Open AccessArticle

The Effects of Structural Breaks on Energy Resources in the Long Run. Evidence from the Last Two Oil Price Crashes before COVID-19

by Pablo Cansado-Bravo and Carlos Rodríguez-Monroy

Designs 2020, 4(4), 49; https://doi.org/10.3390/designs4040049 - 26 Nov 2020

Cited by 2 | Viewed by 2711

Abstract

The course of events since 2014, including the worldwide pandemic of a coronavirus disease, have shown that oil market fundamentals have not always been clearly anticipated and that additional external factors, rather than those related to supply and demand, do play important roles [...] Read more.

The course of events since 2014, including the worldwide pandemic of a coronavirus disease, have shown that oil market fundamentals have not always been clearly anticipated and that additional external factors, rather than those related to supply and demand, do play important roles in signaling future price changes. Within that complex setting, this study examined the influences of structural breaks on the long-term properties of Brent crude oil, gasoil, low-sulfur fuel oil, natural gas, and coal over the period 2002–2018. In an effort to assess the impacts of these structural changes, we identified time points at which structural break changes occurred and unit root properties using a representative variety of unit root testing alternatives. From the estimation results, we observed that only fuel oil and national balancing point (NBP) prices show evidence of mean-reverting behavior, suggesting that shocks to these two markets are short-lived when allowing for structural breaks. Although the idea of market forces bringing the non-renewable markets to their equilibrium in the long run makes the role of policy-making more challenging, it highlights the importance of the policy mix in the transition to a low-carbon energy system. Full article

► Show Figures

Figure 1

23 pages, 4349 KiB

Open AccessArticle

An Efficient Testing Scheme for Power-Balanceability of Power System Including Controllable and Fluctuating Power Devices

by Saher Javaid, Mineo Kaneko and Yasuo Tan

Designs 2020, 4(4), 48; https://doi.org/10.3390/designs4040048 - 25 Nov 2020

Cited by 7 | Viewed by 1822

Abstract

Renewable power sources are environmentally friendly power generation systems, such as wind turbines or photovoltaics; however, the output power fluctuations due to the intermittence and variability of these power systems can greatly affect the quality and stability of the power system network. Furthermore, [...] Read more.

Renewable power sources are environmentally friendly power generation systems, such as wind turbines or photovoltaics; however, the output power fluctuations due to the intermittence and variability of these power systems can greatly affect the quality and stability of the power system network. Furthermore, the power fluctuations that are triggered by power load devices also have similar results on the power system. Therefore, it is essential to introduce power level control for controllable power devices and connection in order to lessen the effects of dynamic power fluctuations that are caused by fluctuating power source devices and load devices. The issue of power balancing as a part of power level control presented in this paper assigns power levels to controllable power devices and connections between power source devices and load devices to absorb dynamic power fluctuations. In this paper, we focus on power conservation law instead of detailed voltage or current-based network characterization and present a new power balanceability test for a power flow system that comprises of both fluctuating and controllable power devices. Our proposed power balanceability test can assure the existence of a power flow assignment of power devices and connections for any value of power generation and/or the consumption of fluctuating power devices. Our proposed power balanceability test method can be expressed as a linear programming problem, and it can be resolved in polynomial time complexity. Full article

(This article belongs to the Special Issue Planning for Home Renewable Energy Systems)

► Show Figures

Figure 1

24 pages, 1196 KiB

Open AccessArticle

Sympérasmology: A Proposal for the Theory of Synthetic System Knowledge

by Imre Horváth

Designs 2020, 4(4), 47; https://doi.org/10.3390/designs4040047 - 05 Nov 2020

Cited by 6 | Viewed by 3249

Abstract

Owing to the results of research in system science, artificial intelligence, and cognitive engineering, engineered systems are becoming more and more powered by knowledge. Complementing common-sense and scientific knowledge, system knowledge is maturing into a crucial productive asset. However, an overall theory of [...] Read more.

Owing to the results of research in system science, artificial intelligence, and cognitive engineering, engineered systems are becoming more and more powered by knowledge. Complementing common-sense and scientific knowledge, system knowledge is maturing into a crucial productive asset. However, an overall theory of the knowledge of intellectualized systems does not exist. Some researchers suggest that time has come to establish a philosophically underpinned theoretical framework. This motion is seconded by the on-going intelligence revolution, in which artificial intelligence becomes a productive power, enabler of smart systems, and a strong transformer of the social life. The goal of this paper is to propose a skeleton of the needed generic theory of system knowledge (and a possible new branch of philosophical studies). The major assumption is that a significant part of the synthetic system knowledge (SSK) is “sympérasma”, that is, knowledge conjectured, inferred, constructed, or otherwise derived during the operation of systems. This part will become even more dominant in the future. Starting out from the above term, the paper suggests calling this theory “sympérasmology”. Some specific domains of “sympérasmological” studies, such as (i) manifestations of SSK, (ii) mechanisms of generating SSK, (iii) dependability of SSK, (iv) operational power of SSK, (v) composability of SSK, and (vi) advancement of SSK, are identified. It is understood that the essence and status of SSK cannot be investigated without considering the related cognitive processes and technological enablers. The paper presents a number of open questions relevant for follow-up discussions. Full article

► Show Figures

Graphical abstract

14 pages, 2382 KiB

Open AccessArticle

Hourly Firewood Consumption Patterns and CO₂ Emission Patterns in Rural Households of Nepal

by Pokharel Tika Ram and Rijal Hom Bahadur

Designs 2020, 4(4), 46; https://doi.org/10.3390/designs4040046 - 04 Nov 2020

Cited by 11 | Viewed by 4736

Abstract

Nepal has low per-capita energy use and a majority of its rural residents use firewood as their primary energy source. Excessive use of firewood in improperly ventilated buildings degrades the indoor environment and health condition of the inhabitants. This study aims to assess [...] Read more.

Nepal has low per-capita energy use and a majority of its rural residents use firewood as their primary energy source. Excessive use of firewood in improperly ventilated buildings degrades the indoor environment and health condition of the inhabitants. This study aims to assess the influence of hourly firewood consumption patterns on CO₂ emissions and resulting concentrations in rural households in Nepal. A field survey was conducted for 24 h in 16 households during winter. The results suggest that most of the households tend to use more firewood during the morning and evening hours. Family size and number of animals reared by the households were positively correlated with firewood consumption, whereas family size was negatively correlated with per-capita firewood consumption. Per-capita firewood consumption was found to be 1.8 kg/(capita·day). Household firewood consumption and CO₂ emissions were 12 kg/(family·day) and 14.26 kg CO₂ e/(household·day), respectively. The larger households spent more time for cooking, while their consumption rate was similar (1.3 kg/h) to that of smaller households. High indoor CO₂ emissions in the morning and evening hours due to high firewood consumption may pose severe health risks to the inhabitants. Therefore, intensive awareness programs and pollution control programs are suggested for improving indoor air quality and health condition of the rural population. Full article

► Show Figures

Figure 1

19 pages, 21938 KiB

Open AccessArticle

Old Buildings’ Façades: Fieldwork and Discussion of Thermal Retrofitting Strategies in a Mediterranean Climate

by Diana Corrêa, Inês Flores-Colen, José Dinis Silvestre, Marco Pedroso and Rita Andrade Santos

Designs 2020, 4(4), 45; https://doi.org/10.3390/designs4040045 - 28 Oct 2020

Cited by 6 | Viewed by 3106

Abstract

This work is within the scope of thermal retrofitting, applied to old buildings’ façades (built between 1700 and 1960) located in Mediterranean climates, such as Portugal. The aim is to increase the sustainability of existing buildings, by reducing their energy consumption needs, for [...] Read more.

This work is within the scope of thermal retrofitting, applied to old buildings’ façades (built between 1700 and 1960) located in Mediterranean climates, such as Portugal. The aim is to increase the sustainability of existing buildings, by reducing their energy consumption needs, for heating and cooling, and the corresponding gaseous emissions, while increasing their users’ comfort. Firstly, an analysis of the advantages and disadvantages of several thermal insulation solutions for façades was carried out, supported in current literature. Then, a survey of real retrofitting scenarios and interviews with experts was completed, to allow the selection of the most adequate thermal insulation techniques. Finally, as a result of this study, the discussion of retrofitting strategies was carried out to support the designer’s decision process, based on a flowchart with complementary tables, discussing the best thermal retrofitting technique to be implemented on old buildings’ façades, case-by-case. Full article

(This article belongs to the Special Issue On Contemporary Architectural Design and the Rehabilitation of Built Heritage)

► Show Figures

Figure 1

14 pages, 1223 KiB

Open AccessArticle

Empowering Design Based on Hybrid Twin^TM: Application to Acoustic Resonators

by Clara Argerich Martín, Arnulfo Carazo Méndez, Olivier Sainges, Emilie Petiot, Anais Barasinski, Mathieu Piana, Louis Ratier and Francisco Chinesta

Designs 2020, 4(4), 44; https://doi.org/10.3390/designs4040044 - 15 Oct 2020

Cited by 7 | Viewed by 3514

Abstract

In the framework of civil aviation noise levels are becoming restricted every year, on one hand to provide comfort to the passengers and on the other hand to be compliant with regulations protecting airports surroundings. New technologies are required to reduce noise to [...] Read more.

In the framework of civil aviation noise levels are becoming restricted every year, on one hand to provide comfort to the passengers and on the other hand to be compliant with regulations protecting airports surroundings. New technologies are required to reduce noise to cope with this restrictions as well as to guarantee a comfortable flight for passengers. For technological industries it is compulsory to stay competitive and keep improving the technology related to air intake acoustic liners. With an unceasingly growing market, for industries it is key to stay in the vanguard of air inlet technologies, ensuring innovation and establishing a proactive environment for future product generations. One of the main objectives in this framework is the reduction of the development time of these new technologies in all the stages of the process. In this work we focus on the design stage of a new prototype and we propose a hybrid technique enabling faster design and the reduction of development time. When designing new technologies or prototypes there are usually two constraints. On one hand, more innovative prototypes may present unconventional shapes are not accurately represented by conventional physical models. On the other hand, the available data is scarce, thus limiting the use of most innovative techniques based on the state-of-art of Artificial Intelligence. In this paper we propose a solution laying in the hybrid twin paradigm, combining both, data in the low limit and physics to provide a hybrid model able to represent unconventional and innovative acoustic solutions. Full article

► Show Figures

Figure 1

19 pages, 25081 KiB

Open AccessArticle

Proposal of an Alternative to the AMA Guidelines for the Evaluation of the Cervical ROM

by María Jesus Martínez-Beltrán, Alberto Fidalgo-Herrera, José A. Moreno-Ruiz and Julio C. de la Torre-Montero

Designs 2020, 4(4), 43; https://doi.org/10.3390/designs4040043 - 09 Oct 2020

Viewed by 2674

Abstract

The cervical spine is one of the most frequently injured joints in a car accident. References for the range of motion (ROM) that should be expected in a person are needed to stage the injuries. The two main objectives of this paper are [...] Read more.

The cervical spine is one of the most frequently injured joints in a car accident. References for the range of motion (ROM) that should be expected in a person are needed to stage the injuries. The two main objectives of this paper are to clinically validate a measuring device for the cervical spine, and to assess if the use of different ROM reference values will render different results from the American Medical Association (AMA) ROM guidelines. The present study is divided into 2 phases, a validation phase with 55 subjects and a case-control phase with 80 subjects. A BTS (Bioengineering Technology and System) system and the EBI-5 (estudio biomecánico integral) system were used for the present investigation. The intraclass correlation agreement value between both measuring devices is considered very good with a Cronbach alpha up to 0.9 in every dimension. Correlations (r) between variables are very high, not showing any values lower than 0.887. All comparisons between using AMA ROM guidelines or normative values presented significant differences (p < 0.05). The EBI-5 system has exhibited good accuracy being paired to a photogrammetric system. The use of guidelines adjusted to age constitute an alternative to the use of the AMA cervical ROM guidelines. Professionals should use age-normalized guidelines as an alternative to the AMA guidelines. Full article

► Show Figures

Figure 1

18 pages, 5429 KiB

Open AccessArticle

Bearing Fault Analysis of BLDC Motor for Electric Scooter Application

by Karolina Kudelina, Bilal Asad, Toomas Vaimann, Anouar Belahcen, Anton Rassõlkin, Ants Kallaste and Dmitry V. Lukichev

Designs 2020, 4(4), 42; https://doi.org/10.3390/designs4040042 - 03 Oct 2020

Cited by 23 | Viewed by 5757

Abstract

In this paper, the bearing faults analysis of the brushless DC motor is presented. The research method is based on the analysis of the vibration signal of healthy as well as faulty bearings by the identification of specific frequencies on the vibration spectrum. [...] Read more.

In this paper, the bearing faults analysis of the brushless DC motor is presented. The research method is based on the analysis of the vibration signal of healthy as well as faulty bearings by the identification of specific frequencies on the vibration spectrum. For the experiment, the most common faults were inflicted on the bearings. As the used motor is intended for electric scooter applications, seven different damages were chosen, which are highly likely to occur during the scooter operation. The main bearing faults and the possibility of fault monitoring are addressed. The vibration data are gathered by the acceleration sensors placed on the motor at different locations and the spectrum analysis is performed using the fast Fourier transform. The variation in the amplitude of the frequency harmonics particularly the fundamental component is presented as a fault indicator. Full article

► Show Figures

Figure 1

16 pages, 4437 KiB

Open AccessArticle

A Novel Digital Design Approach for Metal Additive Manufacturing to Address Local Thermal Effects

by Vignesh I. Perumal, Ahmad R. Najafi and Antonios Kontsos

Designs 2020, 4(4), 41; https://doi.org/10.3390/designs4040041 - 01 Oct 2020

Cited by 6 | Viewed by 5898

Abstract

The reliability and performance qualification of additively manufactured metal parts is critical for their successful and safe use in engineering applications. In current powder-bed fusion type metal additive manufacturing processes, local thermal accumulations affect material microstructure features, overall part quality and integrity, as [...] Read more.

The reliability and performance qualification of additively manufactured metal parts is critical for their successful and safe use in engineering applications. In current powder-bed fusion type metal additive manufacturing processes, local thermal accumulations affect material microstructure features, overall part quality and integrity, as well as bulk mechanical behavior. To address such challenges, the investigation presented in this manuscript describes a novel digital design approach combining topology optimization, process simulations, and lattice size optimization to address local thermal effects caused during manufacturing. Specifically, lattices are introduced in regions of topology optimized geometries where local thermal accumulations are predicted using the process simulations with the overall goal to mitigate high thermal gradients. The results presented demonstrate that the proposed digital design approach reduces local thermal accumulations while achieving target mechanical performance metrics. A discussion on how post-manufacturing heat treatment effects could be also considered, as well as comments on the computational implementation of the proposed approach are provided. Full article

► Show Figures

Figure 1

15 pages, 7595 KiB

Open AccessEditor’s ChoiceArticle

The Integration of Vacuum Insulated Glass in Unitized Façade for the Development of Innovative Lightweight and Highly Insulating Energy Efficient Building Envelope—The Results of Eensulate Façade System Design

by Alessandro Pracucci, Sara Magnani and Oscar Casadei

Designs 2020, 4(4), 40; https://doi.org/10.3390/designs4040040 - 24 Sep 2020

Cited by 2 | Viewed by 3559

Abstract

The European Commission has identified the building industry as one of the key sectors to achieve its 2020 strategy to create conditions for smart, sustainable, and inclusive growth. In this frame, the aim of Horizon 2020′s Eensulate project is the development of innovative [...] Read more.

The European Commission has identified the building industry as one of the key sectors to achieve its 2020 strategy to create conditions for smart, sustainable, and inclusive growth. In this frame, the aim of Horizon 2020′s Eensulate project is the development of innovative lightweight and highly insulating energy efficient unitized building façades, suitable for both new and existing buildings. The Eensulate façade module integrates two components developed within the project: Vacuum Insulated Glass (VIG) for architectural purposes, with a U-value of 0.3 W/sqm∙K; a highly insulating foam for automated manufacturing and insulation for the spandrel part. This article presents the Eensulate façade system design simulations and achievements related to VIG integration to solve issues that emerged by the utilization of its innovative components (sealant thermal bridge and getter strips). VIG design and testing have gradually changed the façade module and consequently, façade components have been progressively designed to achieve the expected target of 0.641 W/sqm∙K for thermal transmittance. The results demonstrate that the target can be achieved by aluminum profiles, Ethylene Propylene Diene Monomer (EPDM) thermal bridge, and additional insulating components, obtaining a new product for unitized façades able to reduce energy consumption in buildings with large glass surfaces. Full article

► Show Figures

Figure 1

Journal Menu

Journal Browser

Designs, Volume 4, Issue 4 (December 2020) – 18 articles

Further Information

Guidelines

MDPI Initiatives

Follow MDPI