Next Article in Journal
Model Calibration of Stochastic Process and Computer Experiment for MVO Analysis of Multi-Low-Frequency Electromagnetic Data
Next Article in Special Issue
Investigation of Plume Offset Characteristics in Bubble Columns by Euler–Euler Simulation
Previous Article in Journal
Metal Chlorides Grafted on SAPO-5 (MClx/SAPO-5) as Reusable and Superior Catalysts for Acylation of 2-Methylfuran Under Non-Microwave Instant Heating Condition
Previous Article in Special Issue
Comparison of Exergy and Advanced Exergy Analysis in Three Different Organic Rankine Cycles
 
 
Article
Peer-Review Record

Inside–Out Method for Simulating a Reactive Distillation Process

Processes 2020, 8(5), 604; https://doi.org/10.3390/pr8050604
by Liang Wang 1, Xiaoyan Sun 1, Li Xia 1, Jianping Wang 2 and Shuguang Xiang 1,*
Reviewer 1: Anonymous
Reviewer 2: Anonymous
Reviewer 3: Anonymous
Processes 2020, 8(5), 604; https://doi.org/10.3390/pr8050604
Submission received: 30 March 2020 / Revised: 11 May 2020 / Accepted: 13 May 2020 / Published: 19 May 2020
(This article belongs to the Special Issue Chemical Process Design, Simulation and Optimization)

Round 1

Reviewer 1 Report

In this article, the authors presented a new method to simulate the reactive distillation process and then the model is validated by one sample. In general, the paper is organized but is not written professionally. I believe this article has good a potential for publication, but miner and major revisions are required to make the result more accurate and reliable. Please see below my comments:

Technical writing and English needs to be improved majorly in most part of the article, e.g, lines, 10,11 (simulation process). lines 14-15, please rephrase lines 18 to 20, also make  "Considering" to "considering". first paragraph of mathematical model also has to be rewritten.

In abstract, please explain more about the result (more details) and methodology.

In introduction part, please add some recent articles.

based on the presented result, good agreement achieved with "isopropyl acetate", but in order to verify the proposed model, please add more simulated samples.

 

Author Response

请参见附件。

Author Response File: Author Response.docx

Reviewer 2 Report

A pdf file with the comments/corrections to be considered is attached. 

Comments for author File: Comments.pdf

Author Response

请参阅附件。

Author Response File: Author Response.docx

Reviewer 3 Report

file

Comments for author File: Comments.doc

Author Response

请参阅附件。

Author Response File: Author Response.docx

Round 2

Reviewer 1 Report

Authors tried to revise the manuscript based on my comments and suggestions. The paper has been improved in both English and technical parts. 

Author Response

请参阅附件

Author Response File: Author Response.docx

Reviewer 2 Report

See attached file.

Comments for author File: Comments.pdf

Author Response

Please see the attachment.

Author Response File: Author Response.docx

Back to TopTop