Next Article in Journal
Kinetics, Electronic Properties of Filled Carbon Nanotubes Investigated with Spectroscopy for Applications
Next Article in Special Issue
Low-Threshold, Multiple High-Order Harmonics Fiber Laser Employing Cr2Si2Te6 Saturable Absorber
Previous Article in Journal
Ultrasensitive Luteolin Electrochemical Sensor Based on Novel Lamellar CuZn@ Nitrogen-Containing Carbon Nanosheets
Previous Article in Special Issue
Femtosecond Er-Doped All-Fiber Laser with High-Density Well-Aligned Carbon-Nanotube-Based Thin-Film Saturable Absorber
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Nanomaterials
Volume 13
Issue 1
10.3390/nano13010177
nanomaterials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Multi-Pulse Bound Soliton Fiber Laser Based on MoTe2 Saturable Absorber

by
Bo Guo
*,
Xinyu Guo
,
Renlai Zhou
,
Zhongyao Ren
,
Qiumei Chen
,
Ruochen Xu
and
Wenbin Luo
Key Laboratory of In-fiber Integrated Optics, Ministry of Education of China, Harbin Engineering University, Harbin 150001, China
*
Author to whom correspondence should be addressed.
Nanomaterials 2023, 13(1), 177; https://doi.org/10.3390/nano13010177
Submission received: 16 September 2022 / Revised: 23 November 2022 / Accepted: 28 November 2022 / Published: 30 December 2022
(This article belongs to the Special Issue Advanced Fiber Laser)
Browse Figures
Versions Notes

Abstract

:
Bound solitons have become a hot topic in the field of nonlinear optics due to their potential applications in optical communication, information processing and radar systems. However, the trapping of the cascaded bound soliton is still a major challenge up to now. Here, we propose and experimentally demonstrate a multi-pulse bound soliton fiber laser based on MoTe2 saturable absorber. In the experiment, MoTe2 nanosheets were synthesized by chemical vapor deposition and transferred to the fiber taper by optical deposition. Then, by inserting the MoTe2 saturable absorber into a ring cavity laser, the two-pulse, three-pulse and four-pulse bound solitons can be stably generated by properly adjusting the pump strength and polarization state. These cascaded bound solitons are expected to be applied to all-optical communication and bring new ideas to the study of soliton lasers.

1. Introduction

Since it was demonstrated, in 1984, soliton lasers and their related phenomena have been a hot research topic in the field of nonlinear optics because of their potential applications in optical communication, information processing and radar systems [1,2]. For decades, this field has developed rapidly and various soliton phenomena have been discovered [3]. So far, besides the conventional solitons, researchers have also obtained other soliton pulses, such as self-similar pulses [4], dissipative solitons [5] and optical rogue waves [6]. However, it should be noted that, for these pulses, only one soliton usually propagates in the laser cavity. Then, a series of questions arise naturally: is it possible for multiple soliton pulses to coexist in a laser cavity? If so, how can these soliton pulses be regulated and controlled? Obviously, the exploration of these problems will help us understand the essence of soliton lasers and bring new possible applications.
In theory, when two or more solitons are very close in time or space, they can interact to form a bound state, which is similar to chemical molecules, called bound solitons or soliton molecules, and can be described by nonlinear Schrodinger equation [7,8,9,10,11,12]. In recent years, bound solitons have attracted great interest from many researchers. For example, Tang et al. experimentally observed bound soliton pulses in fiber lasers based on nonlinear polarization evolution technology [13,14,15,16]. In addition, Seong et al. also obtained bound solitons in a passively mode-locked fiber laser with a figure-eight cavity [17]. Recently, Pang et al. and He et al. demonstrated all-optical bit storage in fiber lasers through optically mechanically bound solitons [18,19], respectively. These efforts have deepened our understanding of bound solitons. It can be found that a pulse-shaping device is usually required to obtain bound solitons in fiber lasers. So far, there are mainly two kinds of pulse-shaping technologies, active and passive. Compared with the active scheme [20], the passive scheme, including nonlinear polarization rotation [21,22,23,24,25,26,27,28,29,30], nonlinear amplifying ring mirror [31,32,33], nonlinear multimode interference [34], stimulated Raman scattering [35] and saturable absorber [36,37,38,39], is considered to be a more promising and efficient way to achieve pulse shaping and obtain bound solitons. It should be noted that most of the bound solitons mentioned above are composed of two pulses. How to obtain more pulse bound states is a scientific problem worth exploring. Theoretically, the accumulation of a large number of soliton pulses is a prerequisite, which can be achieved by increasing the pump intensity or the nonlinear effect in the laser cavity [40,41,42]. This is because of the interaction between the bandwidth constraint of the laser cavity and the energy quantization effect and the soliton splitting only occur when the pump power or nonlinearity is high enough [15]. Thus, it is always the dream of researchers to find optical devices with saturable absorption and high nonlinearity.
In recent years, a new layered material, transition metal dichalcogenides (TMDCs), has received great attention in the fields of physics, chemistry and materials due to its great potential in electronic and optoelectronic applications [43,44,45]. TMDC can be expressed by the formula MX2 (M = Mo, W, Ta, V, Nb, Re, Ti, etc; X = S, Se, Te), which is usually used for catalysis and field effect transistors. Interestingly, due to the specific two-dimensional restriction of electronic motion and the lack of interlayer coupling, few-layer TMDCs have direct bandgaps, making their nonlinear optical performance significantly better than that of bulk TMDCs [46,47,48,49,50]. Among them, MoS2 and WS2 have been widely used in ultrafast lasers in recent years. However, the direct bandgaps of single-layer MoS2 and WS2 are 1.87 eV and 1.98 eV, respectively, and the corresponding operation wavelengths are ~0.66 μm and ~0.63 μm, respectively. Therefore, it is not suitable for communication applications. Meanwhile, layered MoTe2 shows excellent saturable absorption [51,52,53,54,55,56] and high nonlinearity [57,58] (third-order nonlinear optical susceptibility is about 9.96 × 10−11 esu) at longer wavelengths, which is suitable for the study of bound solitons.
Here, we demonstrate the generation of cascade bound solitons in an erbium-doped fiber laser with a MoTe2-coated fiber taper. The cascaded bound solitons obtained are expected to be used in optical communication, information processing and radar systems.

2. Preparation, Characterization and Saturable Absorption of Layered MoTe2

In the experiment, the MoTe2 nanosheets we used were synthesized by chemical vapor deposition, which is similar to the previous report [53]. Specifically, a thin polymethylmethacrylate (PMMA) film is coated on the upper surface of the MoTe2 film, and a MoTe2–PMMA composite is obtained. Since the adsorption capacity of MoTe2–PMMA is greater than that of MoTe2 and the substrate, the MoTe2–PMMA composite material can be stripped from the substrate. To this end, we transferred it to acetone to etch off the PMMA film. Thereafter, the MoTe2 nanosheets were moved into deionized water and clear MoTe2 nanosheets were obtained.
Next, we characterized the MoTe2 samples, as shown in Figure 1. Figure 1a is a transmission electron microscope image showing the physical structure of MoTe2. It can be seen that most of them are high-quality nanosheets with sharp edges. Figure 1b shows the electron diffraction pattern of MoTe2 and a regular array of spots can be observed, indicating that the prepared MoTe2 nanosheets have perfect crystal structure. Furthermore, the thickness of the MoTe2 nanosheets was characterized by atomic force microscopy, as shown in Figure 1c, ranging from 16 to 26 nm. Since the thickness of a single layer of MoTe2 is 0.65 nm, the prepared samples are 25 to 40 layers. The crystal properties of MoTe2 nanosheets were characterized by X-ray diffraction device.As shown in Figure 1d, there are four peaks (002), (004), (006) and (008), which indicates that the MoTe2 nanosheets are relatively uniform in the direction perpendicular to the sheet plane. These peaks in the X-ray diffraction pattern are designated according to the Joint Committee on Powder Diffraction Standards reference 73-1650. From these observed sharp peaks, it can be determined that MoTe2 has a hexagonal crystal structure and its lattice constants are a = 3.52 Å, b = 3.52 Å and b = 13.97 Å, respectively. The relative high strength of the (002) peak indicates that the prepared MoTe2 nanosheets have a well-stacked layered structure.
Furthermore, we also use power-dependent transmission technology to study the saturated absorption of MoTe2-coated microfiber device. The experimental device is shown in Figure 2. Here, the light source used is a femtosecond laser and its parameters are: the center wavelength is 1550 nm, the pulse width is 500 fs, and the repetition frequency is 50 MHz. In the experiment, the optical transmittance under different input light intensities can be obtained by continuously adjusting the output power of the laser, as shown in Figure 2. Similar to graphene, layered MoTe2 also has a Dirac cone structure and its saturation absorption is also caused by Pauli-blocking effect. According to the theoretical model [44], the modulation depth, saturation strength and nonsaturable loss of MoTe2-assisted tapered fiber devices are about 4.45%, 40 MW/cm2 and 40%, respectively. In this experiment, the insertion loss of MoTe2-assisted fiber taper is about 3.5 dB. In the future, it is expected to obtain higher quality saturable absorbers by optimizing the fabrication process of fiber taper and the thickness and uniformity of MoTe2 nanosheets. As mentioned above, the direct band gap of single-layer MoTe2 is about 1.25 eV, and the corresponding operation wavelength is about 993 nm, while the operation wavelength in this work is 1550 nm, showing a slight sub-bandgap absorption phenomenon, which may be caused by defects, two-photon absorption or edge-mode absorption. As shown in Figure 1c, the prepared MoTe2 nanosheets exhibit uneven thickness and shape distribution, which may lead to relatively high absorption near 1550 nm.

3. Experimental Setup

After the preparation of MoTe2 nanosheets, we transfer them to the fiber taper by optical deposition method, as shown in Figure 2. The diameter and waist length of the microfiber are about 16 μm and 2 mm. To check the performance of the laser-containing MoTe2 device, we insert them into the fiber ring laser cavity, as shown in Figure 3. The laser cavity is composed of 0.5 m highly doped erbium-doped fiber (EDF, Er80-8/125, LIEKKI) and 7.2 m single-mode fiber (SMF), in which the dispersion parameter is 15.7 ps/(km∙nm). As a gain medium, the dispersion parameter is 18 ps/(km∙nm) to improve the beam quality. The total net cavity dispersion is −0.15 ps2. Here, the microfiber coated with MoTe2 (SA) is inserted into the cavity for pulse shaping. The fiber-pigtail 976 nm laser diode (980-500-B-FA, LD), with the maximum power of 500 mW, is used as the pump light source. In addition, the fused 980/1550 wavelength division multiplexer (WDM) is used to split the light, the 10:90 optical coupler (OC) is used to extract the output of the laser beam, and the polarization-independent isolator (ISO) and polarization controller (PC) are, respectively, used to force the laser to run counterclockwise in one direction and adjust the polarization state in the cavity. The output power, optical spectrum, pulse train and pulse shape of laser pulses are measured by a power meter, a spectral analyzer (ANDO AQ-6317B) with a spectral resolution of 0.01 nm, a photodetector (Thorlabs PDA 12.5 GHz) combined with a 1 GHz hybrid oscilloscope (Tektronix MDO4054-6, 5 GHz/s) and a commercial autocorrelator (APE, PulseCheck), respectively.

4. Results and Discussions

Before the soliton experiment, we measured the operation of the laser when there was no MoTe2 device and the microfiber was only inserted into the cavity. In the experiment, no matter how the pump power and polarization state of PCs are adjusted, there is only continuous-wave (cw) lasing, thus eliminating the possibility of nonlinear polarization rotation and microfiber mode locking. Then, we insert the MoTe2 device into the ring laser cavity, as shown in Figure 3.
Initially, cw operation started at about 50 mW of incident pump power, while self-starting mode-locking operation occurred at about 80 mW. Here, we provide the typical characteristics of soliton pulse in the laser at 100 mW pump power. Figure 4a shows the optical spectrum of the mode-locked pulses. The center wavelength of the pulse is 1550.2 nm and its 3-dB bandwidth is ~5.1 nm. According to the soliton theory [1], there are two pairs of symmetrical Kelly sidebands in the spectrum, indicating that the state is a soliton state. In addition, it can also be observed that there is a peak in the spectrum, which is a continuous wave, which means that the mode-locking is not sufficient [33]. In order to confirm the existence of soliton pulse in the cavity, we need to measure its pulse profile. In the experiment, we use a commercial autocorrelator to measure the autocorrelation trace of soliton pulses on the picosecond time scale, as shown in Figure 4b. If sech2 function is used to fit the pulse profile, the pulse width is ~500 fs. By calculation, the time bandwidth product (TBP) of these soliton pulses is about 0.323, close to the theoretical transformation limit (0.315), indicating that the soliton pulses are almost perfect. Figure 4c shows the oscilloscope’s trace of the soliton pulse with a time span of 1.2 μs. It can be seen that the soliton pulse propagates in the cavity with a period of 37.6 ns, which corresponds to the basic repetition frequency of 26.6 MHz. In the experiment, the pulse repetition rate can be increased by increasing the pump power. With the increase in pump power, the oscilloscope displays the pulse sequence within a 0.4 µs range, as shown in Figure 4d. The time interval of the pulse sequence is ~12.53 ns, which corresponds to the repetition frequency of 79.8 MHz, which is three times the basic repetition frequency of the laser, indicating the occurrence of harmonic mode locking. In addition, when the pump power is 100 mW, the output power of the soliton laser is about 5 mW.
As we know, bound solitons are multi-pulses with fixed, discrete separation and stable phase difference. To this end, we first make the laser operate in multi-pulse mode. As mentioned earlier, due to the combined effects of the high nonlinearity of MoTe2-coated microfiber, the bandwidth constraint of the laser cavity and the energy quantization effect, a single soliton is split into two or more solitons at a higher pump power level, and these solitons are usually randomly located in the cavity. Interestingly, by properly adjusting the pump power and the polarization state in the cavity, they can automatically interact to form a bound soliton state. By properly adjusting the PCs, we can achieve two-pulse bound solitons at 150 mW pump power. Figure 5a shows the spectrum of two-pulse bound solitons with a central wavelength of 1550.2 nm and a modulation period of 1.53 nm. It can be seen that the typical spectrum of the bound soliton is strongly modulated, indicating that the interval between the two-pulse bound solitons is very small. In theory, the soliton separation (Δτ) can be calculated by the equation [59]:
Δ τ = λ c 2 / ( c ⋅ δ λ )
where c, λc, and δλ are the light speed, center wavelength, and spectral modulation period. In this experiment, these parameters are c = 3 × 108 m/s, λc = 1550.2 nm, and δλ = 1.53 nm, respectively. Thus, the soliton separation Δτ is about 5.23 ps.
The corresponding autocorrelation trace (AC) shown in Figure 5b shows that it is a two-pulse bound soliton. It can be seen that the amplitude of the secondary peak in the AC is almost half of the amplitude of the main peak. Through calculation, the soliton separation from the autocorrelation trace is 5.4 ps, which is slightly larger than the theoretical value calculated from the above equation. It is worth noting that the separation here is about six times the pulse width of the soliton, which means that there is a strong interaction between the solitons. In the experiment, by increasing the pump power to 200 mW and slightly adjusting the polarization state of PCs, we also observed another two-pulse bound soliton. Figure 5c shows the typical spectrum of two-pulse bound solitons with a center wavelength of 1550.2 nm and a modulation period of 3.4 nm. Similarly, cw and soliton sidebands can be observed. Furthermore, the corresponding AC shown in Figure 5d shows that it is a two-pulse bound soliton. In the experiment, the pulse separation of the soliton is measured to be 2.39 ps, which corresponds to the period of spectral modulation.
In addition, if the pump power is increased from 250 mW to 350 mW and the PC is properly adjusted, three-pulse and four-pulse bound solitons can be obtained, as shown in Figure 6. Figure 6a shows the optical spectrum of a three-pulse bound soliton with a central wavelength of 1550.2 nm and a modulation period of 1.53 nm. It can be seen that the spectrum is strongly modulated. The corresponding AC shown in Figure 6b shows that it is a three-pulse bound soliton. In the experiment, the pulse-to-pulse interval of the soliton is measured to be 5.4 ps, which corresponds to the period of spectral modulation. Figure 6c shows the optical spectrum of a four-pulse bound soliton with 1550.2 nm central wavelength and disorder modulation period. Similarly, it can be seen that the spectrum is strongly modulated. The corresponding AC shown in Figure 6d shows that it is a four-pulse bound soliton. In the experiment, we measured the pulse separation of solitons as 4.4 ps, 2.4 ps and 4 ps, respectively. In this experiment, we notice a hybrid-pulse phenomenon, which is different from the common bound soliton. This may be related to the high nonlinearity of the tapered fiber device, i.e., higher-order effect, which affects the state and interaction of the bound solitons in the laser cavity [40,41]. Further investigation on its formation mechanism is still required in future work.
In the above experiments, we obtained the cascade bound solitons with up to four pulses. This shows that the MoTe2-assisted fiber taper is a very good SA with pulse-shaping function, which is suitable for the study of bound solitons. However, as we know, a variety of lasers based on carbon nanotubes [36,37], graphene [38,39,40], topological insulators [41] and black phosphorus [44] can generate bound solitons, which suggests that the appearance of bound solitons is not related to specific materials but a common nonlinear optical phenomenon widely existing in lasers. In this experiment, more bound solitons are obtained due to the fabrication of high-quality fiber taper, which not only provide good mode locking, but also produce high nonlinearity. In particular, the latter results in the splitting of conventional solitons, and then the cascade bound solitons are realized. In theory, the combination of layered materials and fiber taper will greatly enhance the effective third-order nonlinearity in the cavity [60]. Thus, it can be predicted that bound solitons with five or more pulse would be obtained by further optimizing the MoTe2-deposited fiber taper and laser parameters, such as polarization state, pump strength and cavity dispersion [61,62,63]. In addition, the cw in the laser may be related to the insufficient modulation depth of the SA. In the future work, we will optimize the preparation of mode-locker to improve the modulation depth and mode locking efficiency.

5. Conclusions

In conclusion, we have demonstrated a cascade bound soliton fiber laser based on all-fiber saturable absorber. In the experiment, we obtain two-pulse, three-pulse and four-pulse bound solitons by properly adjusting the pump power and polarization state. For two-pulse bound solitons, the soliton separation is 5.4 ps and 2.39 ps, corresponding to loose and tight binding, respectively. For three-pulse bound solitons, the soliton separation is 5.4 ps. For four-pulse bound solitons, the soliton separation is 4.4 ps, 2.4 ps and 4 ps, respectively, which is the largest number of bound solitons so far generated from passively mode-locked fiber lasers with layered materials. The obtained cascaded bound solitons will be expected to be used in optical telecommunications, information processing and radar systems.

Author Contributions

Conceptualization, B.G.; methodology, B.G.; validation, X.G.; formal analysis, Q.C. and R.X.; investigation, Z.R.; resources, B.G.; data curation, B.G.; writing—original draft preparation, B.G.; writing—review and editing, W.L.; visualization, R.Z.; supervision, B.G.; project administration, B.G.; funding acquisition, B.G. All authors have read and agreed to the published version of the manuscript.

Funding

Natural Science Foundation of Heilongjiang Province (JJ2019LH1509); Fundamental Research Funds for the Central Universities (3072020CF2519); 111 project of Harbin Engineering University (B13015).

Data Availability Statement

The data are contained within the article.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Agrawal, G.P. Nonlinear Fiber Optics, 5th ed.; Academic Press: Cambridge, MA, USA, 2013. [Google Scholar]
  2. Keller, U. Recent developments in compact ultrafast lasers. Nature 2003, 424, 831–838. [Google Scholar] [CrossRef] [PubMed]
  3. Fermann, M.E.; Hartl, I. Ultrafast fibre lasers. Nat. Photon. 2013, 7, 868–874. [Google Scholar] [CrossRef]
  4. Ilday, F.Ö.; Buckley, J.R.; Clark, W.G.; Wise, F.W. Self-similar evolution of parabolic pulses in a laser. Phys. Rev. Lett. 2004, 92, 213902. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  5. Grelu, P.; Akhmediev, N. Dissipative solitons for mode-locked lasers. Nat. Photon. 2012, 6, 84–92. [Google Scholar] [CrossRef]
  6. Solli, D.R.; Ropers, C.; Koonath, P.; Jalali, B. Optical rogue waves. Nature 2007, 450, 1054–1057. [Google Scholar] [CrossRef] [PubMed]
  7. Malomed, B.A. Bound solitons in the nonlinear Schrödinger-Ginzburg-Landau equation. Phys. Rev. A 1991, 44, 6954. [Google Scholar] [CrossRef] [PubMed]
  8. Malomed, B.A. Bound states of envelope solitons. Phys. Rev. E 1993, 47, 2874. [Google Scholar] [CrossRef]
  9. Akhmediev, N.N.; Ankiewicz, A.; Soto-Crespo, J.M. Multisoliton of the complex Ginzburg-Landau equation. Phys. Rev. Lett. 1997, 79, 4047. [Google Scholar] [CrossRef] [Green Version]
  10. Alamoudi, S.M.; Al Khawaja, U.; Baizakov, B.B. Averaged dynamics of soliton molecules in dispersion-managed optical fibers. Phys. Rev. A 2014, 89, 053817. [Google Scholar] [CrossRef] [Green Version]
  11. Korobko, D.A.; Gumenyuk, R.; Zolotovskii, I.O.; Okhotnikov, O.G. Analysis of steady bound soliton-state attributes in hybrid mode-locked fiber laser. Laser Phys. Lett. 2016, 13, 105103. [Google Scholar] [CrossRef]
  12. Sakaguchi, H.; Skryabin, D.V.; Malomed, B.A. Stationary and oscillatory bound states of dissipative solitons created by third-order dispersion. Opt. Lett. 2018, 43, 2688–2691. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  13. Tang, D.Y.; Man, W.S.; Tam, H.Y.; Drummond, P.D. Observation of bound states of solitons in a passively mode-locked fiber laser. Phys. Rev. A 2020, 64, 033814. [Google Scholar] [CrossRef] [Green Version]
  14. Zhao, B.; Tang, D.Y.; Shum, P.; Guo, X.; Lu, C.; Tam, H.Y. Bound twin-pulse solitons in a fiber ring laser. Phys. Rev. E 2004, 70, 067602. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  15. Tang, D.Y.; Zhao, L.M.; Zhao, B. Multipulse bound solitons with fixed pulse separations formed by direct soliton interaction. Appl. Phys. B 2005, 80, 239–242. [Google Scholar] [CrossRef]
  16. Zhao, L.M.; Tang, D.Y.; Wu, X.; Lei, D.J.; Wen, S.C. Bound states of gain-guided solitons in a passively mode-locked fiber laser. Opt. Lett. 2007, 32, 3191–3193. [Google Scholar] [CrossRef]
  17. Seong, N.H.; Kim, D.Y. Experimental observation of stable bound solitons in a figure-eight fiber laser. Opt. Lett. 2002, 27, 1321–1323. [Google Scholar] [CrossRef]
  18. Pang, M.; He, W.; Jiang, X.; Russell, P.S.J. All-optical bit storage in a fibre laser by optomechanically bound states of solitons. Nat. Photon. 2016, 10, 454–458. [Google Scholar] [CrossRef]
  19. He, W.; Pang, M.; Yeh, D.H.; Huang, J.; Menyuk, C.R.; Russell, P.S.J. Formation of optical supramolecular structures in a fibre laser by tailoring long-range soliton interactions. Nat. Commun. 2019, 10, 5756. [Google Scholar] [CrossRef] [Green Version]
  20. Hsiang, W.W.; Lin, C.Y.; Lai, Y. Stable new bound soliton pairs in a 10 GHz hybrid frequency modulation mode-locked Er-fiber laser. Opt. Lett. 2006, 31, 1627–1629. [Google Scholar] [CrossRef]
  21. Roy, V.; Olivier, M.; Piché, M. Pulse interactions in the stretched-pulse fiber laser. Opt. Express 2005, 13, 9217–9223. [Google Scholar] [CrossRef]
  22. Olivier, M.; Roy, V.; Piché, M. Third-order dispersion and bound states of pulses in a fiber laser. Opt. Lett. 2006, 31, 580–582. [Google Scholar] [CrossRef] [PubMed]
  23. Komarov, A.; Haboucha, A.; Sanchez, F. Ultrahigh-repetition-rate bound-soliton harmonic passive mode-locked fiber lasers. Opt. Lett. 2008, 33, 2254–2256. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  24. Liu, X. Dynamic evolution of temporal dissipative-soliton molecules in large normal path-averaged dispersion fiber lasers. Phys. Rev. A 2010, 82, 063834. [Google Scholar] [CrossRef]
  25. Wang, C.; Wang, L.; Li, X.; Luo, W.; Feng, T.; Zhang, Y.; Guo, P.; Ge, Y. Few-layer bismuthene for femtosecond soliton molecules generation in Er-doped fiber laser. Nanotechnology 2018, 30, 025204. [Google Scholar] [CrossRef] [PubMed]
  26. Wang, Z.; Zhan, L.; Majeed, A.; Zou, Z. Harmonic mode locking of bound solitons. Opt. Lett. 2015, 40, 1065–1068. [Google Scholar] [CrossRef] [Green Version]
  27. Lin, S.F.; Lin, Y.H.; Cheng, C.H.; Chi, Y.C.; Lin, G.R. Stability and chirp of tightly bunched solitons from nonlinear polarization rotation mode-locked erbium-doped fiber lasers. J. Lightw. Technol. 2016, 34, 5118–5128. [Google Scholar] [CrossRef]
  28. Wang, P.; Bao, C.; Fu, B.; Xiao, X.; Grelu, P.; Yang, C. Generation of wavelength-tunable soliton molecules in a 2-μm ultrafast all-fiber laser based on nonlinear polarization evolution. Opt. Lett. 2016, 41, 2254–2257. [Google Scholar] [CrossRef]
  29. Wang, Z.Q.; Nithyanandan, K.; Coillet, A.; Tchofo-Dinda, P.; Grelu, P. Optical soliton molecular complexes in a passively mode-locked fibre laser. Nat. Commun. 2019, 10, 830. [Google Scholar] [CrossRef] [Green Version]
  30. Wang, Z.; Wang, X.; Song, Y.; Liu, J.; Zhang, H. Generation and pulsating behaviors of loosely bound solitons in a passively mode-locked fiber laser. Phys. Rev. A 2020, 101, 013825. [Google Scholar] [CrossRef]
  31. Hsiang, W.W.; Chang, C.H.; Cheng, C.P.; Lai, Y. Passive synchronization between a self-similar pulse and a bound-soliton bunch in a two-color mode-locked fiber laser. Opt. Lett. 2009, 34, 1967–1969. [Google Scholar] [CrossRef]
  32. Yun, L.; Liu, X. Generation and propagation of bound-state pulses in a passively mode-locked figure-eight laser. IEEE Photon. J. 2012, 4, 512–519. [Google Scholar]
  33. Huang, Y.Q.; Hu, Z.A.; Cui, H.; Luo, Z.C.; Luo, A.P.; Xu, W.C. Coexistence of harmonic soliton molecules and rectangular noise-like pulses in a figure-eight fiber laser. Opt. Lett. 2016, 41, 4056–4059. [Google Scholar] [CrossRef]
  34. Zhao, F.; Wang, H.; Hu, X.; Wang, Y.; Zhang, W.; Zhang, T.; Sun, C.; Yan, Z. Experimental observation of bound solitons with a nonlinear multimode interference-based saturable absorber. Laser Phys. Lett. 2018, 15, 115106. [Google Scholar] [CrossRef]
  35. Babin, S.A.; Podivilov, E.V.; Kharenko, D.S.; Bednyakova, A.E.; Fedoruk, M.P.; Kalashnikov, V.L.; Apolonski, A. Multicolour nonlinearly bound chirped dissipative solitons. Nat. Commun. 2014, 5, 4653. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  36. Xu, X.; Ruan, S.; Zhai, J.; Li, L.; Pei, J.; Tang, Z. Facile active control of a pulsed erbium-doped fiber laser using modulation depth tunable carbon nanotubes. Photon. Res. 2018, 6, 996–1002. [Google Scholar] [CrossRef]
  37. Liu, X.; Yao, X.; Cui, Y. Real-time observation of the buildup of soliton molecules. Phys. Rev. Lett. 2018, 121, 023905. [Google Scholar] [CrossRef] [PubMed]
  38. Fu, B.; Li, J.; Cao, Z.; Popa, D. Bound states of solitons in a harmonic graphene-mode-locked fiber laser. Photon. Res. 2019, 7, 116–120. [Google Scholar] [CrossRef]
  39. Wang, Z.; Xu, Y.; Dhanabalan, S.C.; Sophia, J.; Zhao, C.; Xu, C.; Zhang, H. Black phosphorus quantum dots as an efficient saturable absorber for bound soliton operation in an erbium doped fiber laser. IEEE Photon. J. 2016, 8, 5. [Google Scholar] [CrossRef]
  40. Song, Y.F.; Zhang, H.; Zhao, L.M.; Shen, D.Y.; Tang, D.Y. Coexistence and interaction of vector and bound vector solitons in a dispersion-managed fiber laser mode locked by graphene. Opt. Express 2016, 24, 1814–1822. [Google Scholar] [CrossRef]
  41. Liu, M.; Luo, A.P.; Zheng, X.W.; Zhao, N.; Liu, H.; Luo, Z.C.; Xu, W.C.; Chen, Y.; Zhao, C.Z.; Zhang, H. Microfiber-based highly nonlinear topological insulator photonic device for the formation of versatile multi-soliton patterns in a fiber laser. J. Lightw. Technol. 2015, 33, 2056–2061. [Google Scholar]
  42. Chen, Y.; Chen, S.; Liu, J.; Gao, Y.; Zhang, W. Sub-300 femtosecond soliton tunable fiber laser with all-anomalous dispersion passively mode locked by black phosphorus. Opt. Express 2016, 24, 13316–13324. [Google Scholar] [CrossRef] [PubMed]
  43. Nicolosi, V.; Chhowalla, M.; Kanatzidis, M.G.; Strano, M.S.; Coleman, J.N. Liquid exfoliation of layered materials. Science 2013, 340, 1226419. [Google Scholar] [CrossRef]
  44. Guo, B.; Xiao, Q.L.; Wang, S.H.; Zhang, H. 2D layered materials: Synthesis, nonlinear optical properties, and device applications. Laser Photon. Rev. 2019, 13, 1800327. [Google Scholar] [CrossRef]
  45. Wang, Y.; Mao, D.; Gan, X.; Han, L.; Ma, C.; Xi, T.; Zhang, Y.; Shang, W.; Hua, S.; Zhao, J. Harmonic mode locking of bound-state solitons fiber laser based on MoS2 saturable absorber. Opt. Express 2015, 23, 205–210. [Google Scholar] [CrossRef] [PubMed]
  46. Li, Y.; Zhang, J.; Huang, D.; Sun, H.; Fan, F.; Feng, J.; Wang, Z.; Ning, C.Z. Room-temperature continuous-wave lasing from monolayer molybdenum ditelluride integrated with a silicon nanobeam cavity. Nat. Nanotechnol. 2017, 12, 987–992. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  47. Sun, Z.; Martinez, A.; Wang, F. Optical modulators with 2D layered materials. Nat. Photon. 2016, 10, 227–238. [Google Scholar] [CrossRef] [Green Version]
  48. Yu, S.; Wu, X.; Wang, Y.; Guo, X.; Tong, L. 2D materials for optical modulation: Challenges and opportunities. Adv. Mater. 2017, 29, 1606128. [Google Scholar] [CrossRef]
  49. Liu, X.; Guo, Q.; Qiu, J. Emerging low-dimensional materials for nonlinear optics and ultrafast photonics. Adv. Mater. 2017, 29, 1605886. [Google Scholar] [CrossRef]
  50. Fang, H.; Liu, J.; Li, H.; Zhou, L.; Liu, L.; Li, J.; Wang, X.; Krauss, T.F.; Wang, Y. 1305 nm Few-Layer MoTe2-on-Silicon Laser-Like Emission. Laser Photon. Rev. 2018, 12, 1800015. [Google Scholar] [CrossRef] [Green Version]
  51. Mao, D.; Du, B.; Yang, D.; Zhang, S.; Wang, Y.; Zhang, W.; She, X.; Cheng, H.; Zeng, H.; Zhao, J. Nonlinear saturable absorption of liquid-exfoliated molybdenum/tungsten ditelluride nanosheets. Small 2016, 12, 1489–1497. [Google Scholar] [CrossRef]
  52. Wang, G. Wavelength-switchable passively mode-locked fiber laser with mechanically exfoliated molybdenum ditelluride on side-polished fiber. Opt. Laser Technol. 2017, 96, 307–312. [Google Scholar] [CrossRef]
  53. Wang, J.; Chen, H.; Jiang, Z.; Yin, J.; Wang, J.; Zhang, M.; He, T.; Li, J.; Yan, P.; Ruan, S. Mode-locked thulium-doped fiber laser with chemical vapor deposited molybdenum ditelluride. Opt. Lett. 2018, 43, 1998–2001. [Google Scholar] [CrossRef] [PubMed]
  54. Liang, Y.; Zhao, J.; Qiao, W.; Yang, K.; Li, T.; Zhao, S. Passively Q-switched Er: YAG laser at 1645 nm utilizing a multilayer molybdenum ditelluride (MoTe2) saturable absorber. Laser Phys. Lett. 2018, 15, 095801. [Google Scholar] [CrossRef]
  55. Yan, B.; Zhang, B.; Nie, H.; Wang, H.; Li, G.; Sun, X.; Wang, R.; Lin, N.; He, J. High-power passively Q-switched 2.0 μm all-solid-state laser based on a MoTe2 saturable absorber. Opt. Express 2018, 26, 18505–18512. [Google Scholar] [CrossRef]
  56. Ma, Y.; Tian, K.; Dou, X.; Yang, J.; Li, Y.; Han, W.; Xu, H.; Liu, J. Passive Q-switching induced by few-layer MoTe2 in an Yb: YCOB microchip laser. Opt. Express 2018, 26, 25147–25155. [Google Scholar] [CrossRef] [PubMed]
  57. Ruppert, C.; Aslan, B.; Heinz, T.F. Optical properties and band gap of single-and few-layer MoTe2 crystals. Nano Lett. 2014, 14, 6231–6236. [Google Scholar] [CrossRef]
  58. Quan, C.; He, M.; He, C.; Huang, Y.; Zhu, L.; Yao, Z.; Xu, X.; Lu, C.; Xu, X. Transition from saturable absorption to reverse saturable absorption in MoTe2 nano-films with thickness and pump intensity. Appl. Surf. Sci. 2018, 457, 115–120. [Google Scholar] [CrossRef]
  59. Zhao, J.; Wang, Y.; Ruan, S.; Yan, P.; Zhang, H.; Tsang, Y.H.; Yang, J.H.; Huang, G. Three operation regimes with an L-band ultrafast fiber laser passively mode-locked by graphene oxide saturable absorber. JOSA B 2014, 31, 716–722. [Google Scholar] [CrossRef]
  60. Liang, H.; Zhao, X.; Liu, B.; Yu, J.; Liu, Y.; He, R.; He, J.; Li, H.; Wang, Z. Real-time dynamics of soliton collision in a bound-state soliton fiber laser. Nanophotonics 2020, 9, 1921–1929. [Google Scholar] [CrossRef]
  61. Dvoretskiy, D.A.; Sazonkin, S.G.; Kudelin, I.S.; Orekhov, I.O.; Pnev, A.B.; Karasik, V.E.; Denisov, L.K. Multibound soliton formation in an erbium-doped ring laser with a highly nonlinear resonator. IEEE Photon. Technol. Lett. 2019, 32, 43–46. [Google Scholar] [CrossRef]
  62. Zhu, T.; Wang, Z.; Wang, D.N.; Yang, F.; Li, L. Observation of controllable tightly and loosely bound solitons with an all-fiber saturable absorber. Photon. Res. 2019, 7, 61–68. [Google Scholar] [CrossRef]
  63. Peng, J.; Zhao, Z.; Boscolo, S.; Finot, C.; Sugavanam, S.; Churkin, D.V.; Zeng, H. Breather Molecular Complexes in a Passively Mode-Locked Fiber Laser. Laser Photon. Rev. 2021, 15, 2000132. [Google Scholar] [CrossRef]
Nanomaterials 13 00177 g001 550
Figure 1. Characterization of few-layer MoTe2. (a) Transmission electron microscope image; (b) electron diffraction patterns; (c) atomic force microscopy image and (d) X-ray diffraction pattern.
Figure 1. Characterization of few-layer MoTe2. (a) Transmission electron microscope image; (b) electron diffraction patterns; (c) atomic force microscopy image and (d) X-ray diffraction pattern.
Nanomaterials 13 00177 g001
Nanomaterials 13 00177 g002 550
Figure 2. The experimental setup and the corresponding saturable absorption curve of the MoTe2-assisted microfiber device (inset: the photograph of the MoTe2 device).
Figure 2. The experimental setup and the corresponding saturable absorption curve of the MoTe2-assisted microfiber device (inset: the photograph of the MoTe2 device).
Nanomaterials 13 00177 g002
Nanomaterials 13 00177 g003 550
Figure 3. The experimental setup of the proposed fiber laser. LD: laser diode, WDM: wavelength-division multiplexer, EDF: erbium-doped fiber, ISO: polarization-independent isolator, OC: optical coupler, SMF: single-mode fiber, PC: polarization controller, SA: MoTe2-assisted fiber taper.
Figure 3. The experimental setup of the proposed fiber laser. LD: laser diode, WDM: wavelength-division multiplexer, EDF: erbium-doped fiber, ISO: polarization-independent isolator, OC: optical coupler, SMF: single-mode fiber, PC: polarization controller, SA: MoTe2-assisted fiber taper.
Nanomaterials 13 00177 g003
Nanomaterials 13 00177 g004 550
Figure 4. Typical characteristics of conventional soliton pulses: (a) optical spectrum; (b) autocorrelation trace; (c,d) oscilloscope’s traces of soliton pulse and its triple form.
Figure 4. Typical characteristics of conventional soliton pulses: (a) optical spectrum; (b) autocorrelation trace; (c,d) oscilloscope’s traces of soliton pulse and its triple form.
Nanomaterials 13 00177 g004
Nanomaterials 13 00177 g005 550
Figure 5. Typical characteristics of two kinds of two-pulse bound solitons: (a,c) optical spectra; (b,d) autocorrelation traces.
Figure 5. Typical characteristics of two kinds of two-pulse bound solitons: (a,c) optical spectra; (b,d) autocorrelation traces.
Nanomaterials 13 00177 g005
Nanomaterials 13 00177 g006 550
Figure 6. Typical characteristics of three-pulse and four-pulse bound solitons: (a,c) optical spectra; (b,d) autocorrelation traces.
Figure 6. Typical characteristics of three-pulse and four-pulse bound solitons: (a,c) optical spectra; (b,d) autocorrelation traces.
Nanomaterials 13 00177 g006
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Guo, B.; Guo, X.; Zhou, R.; Ren, Z.; Chen, Q.; Xu, R.; Luo, W. Multi-Pulse Bound Soliton Fiber Laser Based on MoTe2 Saturable Absorber. Nanomaterials 2023, 13, 177. https://doi.org/10.3390/nano13010177

AMA Style

Guo B, Guo X, Zhou R, Ren Z, Chen Q, Xu R, Luo W. Multi-Pulse Bound Soliton Fiber Laser Based on MoTe2 Saturable Absorber. Nanomaterials. 2023; 13(1):177. https://doi.org/10.3390/nano13010177

Chicago/Turabian Style

Guo, Bo, Xinyu Guo, Renlai Zhou, Zhongyao Ren, Qiumei Chen, Ruochen Xu, and Wenbin Luo. 2023. "Multi-Pulse Bound Soliton Fiber Laser Based on MoTe2 Saturable Absorber" Nanomaterials 13, no. 1: 177. https://doi.org/10.3390/nano13010177

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop