Next Article in Journal
Acid Treatments of Ti-Based Metallic Glasses for Improving Corrosion Resistance in Implant Applications
Previous Article in Journal
Inverse Design of Aluminium Alloys Using Genetic Algorithm: A Class-Based Workflow
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Metals
Volume 14
Issue 2
10.3390/met14020240
metals-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
Correction to Metals 2017, 7(10), 423.
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Tamadon et al. Development of Metallographic Etchants for the Microstructure Evolution of A6082-T6 BFSW Welds. Metals 2017, 7, 423

by
Abbas Tamadon
1,
Dirk J. Pons
1,*,
Kamil Sued
2 and
Don Clucas
1
1
Department of Mechanical Engineering, University of Canterbury, Christchurch 8140, New Zealand
2
Advanced Manufacturing Centre, Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka, Durian Tunggal 76100, Melaka, Malaysia
*
Author to whom correspondence should be addressed.
Metals 2024, 14(2), 240; https://doi.org/10.3390/met14020240
Submission received: 29 March 2021 / Accepted: 29 January 2024 / Published: 16 February 2024
Versions Notes
In the original publication [1], there was a mistake in Figure 8c as published. The microstructure of the thermomechanical affected zone (TMAZ) for the top-shoulder region of the retreating side (RS) was shown wrongly in Figure 8c. This was caused by a wrong image, from the bottom-shoulder of the same sample, being included in the assembly of images.
We have gone back to the sample, retaken the images for the TMAZ of the top-shoulder region. Hence, the following correction needs to be made to Figure 8. The corrected Figure 8c appears below. The authors state that the scientific conclusions are unaffected.
Metals 14 00240 i001
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Tamadon, A.; Pons, D.J.; Sued, K.; Clucas, D. Development of Metallographic Etchants for the Microstructure Evolution of A6082-T6 BFSW Welds. Metals 2017, 7, 423. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Tamadon, A.; Pons, D.J.; Sued, K.; Clucas, D. Correction: Tamadon et al. Development of Metallographic Etchants for the Microstructure Evolution of A6082-T6 BFSW Welds. Metals 2017, 7, 423. Metals 2024, 14, 240. https://doi.org/10.3390/met14020240

AMA Style

Tamadon A, Pons DJ, Sued K, Clucas D. Correction: Tamadon et al. Development of Metallographic Etchants for the Microstructure Evolution of A6082-T6 BFSW Welds. Metals 2017, 7, 423. Metals. 2024; 14(2):240. https://doi.org/10.3390/met14020240

Chicago/Turabian Style

Tamadon, Abbas, Dirk J. Pons, Kamil Sued, and Don Clucas. 2024. "Correction: Tamadon et al. Development of Metallographic Etchants for the Microstructure Evolution of A6082-T6 BFSW Welds. Metals 2017, 7, 423" Metals 14, no. 2: 240. https://doi.org/10.3390/met14020240

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop