Nanoarchitectonics and Molecular Docking of 4-(Dimethylamino)Pyridin-1-Ium 2-3 Methyl-4-Oxo-Pyri-Do[1,2-a]Pyrimidine-3-Carboxylate

Abstract

A retro-Claisen reaction of 1-(4-oxo-4H-pyrido [1,2-a]pyrimidin-3-yl)butane-1,3-dione, 3, in the presence of potassium hydroxide and 4-dimethylamino-pyridine has been carried out, leading to 4-(dimethylamino)pyridin-1-ium 2-methyl-4-oxo-pyrido [1,2-a]pyrimidine-3-carboxylate 5. A plausible mechanism explaining the formation of the title compound has been proposed. A single-crystal X-ray diffraction analysis confirms the crystal structure of the isolated organic salt (5). In the crystal, the title compound adopts a layered structure where there are stacks of cations and anions formed by slipped π-stacking interactions. These stacks are linked by regions consisting of water molecules that are hydrogen-bonded together. DFT and Hirshfeld surface analysis supported the experimental results of the molecular geometry and the intercontacts between different units in the crystal. The druglikeness, ADMET properties, and predicted targets were investigated, and the observed results suggest that 5 may act as a carbonic anhydrase I inhibitor. The assumption is confirmed by docking 5 into the active binding site of carbonic anhydrase, which shows it to have good binding affinities and to form stable complexes with the active residues of carbonic anhydrase I.

1. Introduction

Numerous N-heterocyclic compounds are found in a wide variety of biologically active substances [1,2,3,4,5]. These include vitamins, nucleic acids, antibiotics, pharmaceuticals, agrochemicals, and more. Furthermore, nitrogen heterocycles are present in almost 75% of known small-molecule drugs. A multitude of nitrogen-containing heterocyclic compounds exhibit a broad spectrum of pharmacological properties, making them promising building blocks for the construction of new drug candidates. This is due to the nitrogen atom’s capacity to readily form hydrogen bonds with biological targets [6,7,8], its ability to donate or accept protons, and its ability to easily form various weak interactions.

Pyridopyrimidines are a significant group of nitrogen-containing heterocycles possessing a diverse range of biological activities. Moreover, pyrido[1,2-a]pyrimidine constitutes the core structure of some marketed drugs, including Seganserin, an antihypertensive [9], Barmastine, an antiallergic agent [10], Pemirolast, an antiallergic agent [11], Pirenperone, a tranquilizer [12], Lusaperidone, an antidepressant [13] and Ramastine, an antiallergic, anti-ulcerative, and antiasthmatic agent (Figure 1) [10,12,13,14,15,16].

2. Results and Discussion

2.1. Mechanism of the Synthesis of 4-(Dimethylamino)Pyridin-1-Ium 2-Methyl-4-Oxo-Pyrido[1,2-a Pyrimidine-3-Carboxylate

The retro-Claisen reaction, a useful synthetic tool in organic chemistry, leads to carboxylic acid derivatives involving a β-dicarbonyl carbon–carbon bond cleavage under various conditions [17,18]. Continuing our previous investigations on the synthesis of pyrido[1,2-a]pyrimidine derivatives [19,20], we describe the alkaline cleavage of 1-(4-oxo-4H-pyrido[1,2-a]pyrimidin-3-yl)butane-1,3-dione (3), which acts as an unsymmetrical β-diketone. This cleavage was carried out using potassium hydroxide and 4-dimethylaminopyridine as bases under refluxing conditions in ethanol. The unsymmetrical β-diketone used in this study was prepared by condensing 3-acetyl-4-hydroxy-6-methyl-2H-pyran-2-one, 1, with 2-aminopyridine, 2, in refluxing n-butanol according to a synthetic route developed by our team [21]. Compound 3 can exist in two tautomeric forms, 3a and 3b, and was reacted with a mixture of potassium hydroxide and 4-dimethylaminopyridine in refluxing ethanol to produce 4-dimethylaminopyridin-1-ium 2-methyl-4-oxo-pyrido[1,2-a]pyrimidine-3-carboxylate, 5, as depicted in Scheme 1.

A proposed mechanism suggests that the formation of 5 involves a nucleophilic attack by a hydroxide ion on the ketonic carbonyl attached to the pyridinic carbon in the 3-position of the biheterocyclic system, resulting in the formation of an intermediate [A]. The latter then undergoes a carbon–carbon bond cleavage, leading to the formation of the carboxylic acid [B]. The carboxylic acid subsequently reacts with 4-dimethylaminopyridine to yield the organic salt 5 (Scheme 1).

2.2. X-ray Analysis

The geometrical parameters for the cation and the anion are as expected for the given formulation. In the crystal, the ions stack along the normal to ($10\overline{2})$ in the order cation-anion-anion-cation as the repeat unit. These are formed by slipped π-stacking interactions between cation pyridinium and anion pyrimidine rings (centroid⋯centroid = 3.5041(5) Å, dihedral angle = 3.74(4)°, slippage = 1.10 Å) and between anion pyrido and anion pyrimidine rings (centroid⋯centroid = 3.6680(5) Å, dihedral angle = 3.70(4)°, slippage = 1.54 Å) (Figure 2). The solvent water molecules form hydrogen-bonded regions between the stacks and connect them (

Table 1. Hydrogen bonds (Å,°) for 5.

D—H⋯A	D—H	H⋯A	D⋯A	D—H⋯A
C1—H1⋯O6	0.95	2.57	3.2568 (11)	130
C2—H2⋯O2 i	0.95	2.51	3.3905 (10)	154
N3—H3A⋯O1 ii	0.91	2.17	2.9118 (10)	138
N3—H3A⋯O3 ii	0.91	2.15	2.8662 (10)	135
C12—H12⋯O4	0.95	2.44	3.3663 (11)	164
C13—H13⋯O6 iii	0.95	2.58	3.5143 (11)	168
C14—H14⋯O7 ii	0.95	2.54	3.2957 (14)	137
O4—H4A⋯O7 iv	0.87	1.89	2.7427 (12)	165
O4—H4B⋯O2	0.87	1.90	2.7713 (10)	175
O5—H5A⋯O1	0.87	1.92	2.7831 (10)	170
O5—H5B⋯O8 v	0.87	1.93	2.7944 (10)	172
O5—H5C⋯O5 v	0.87	1.98	2.8259 (15)	164
O6—H6A⋯O8	0.87	1.93	2.7975 (10)	176
O6—H6B⋯O1 i	0.87	1.91	2.7705 (9)	172
O7—H7A⋯O4 vi	0.87	1.95	2.8018 (13)	167
O7—H7B⋯O6	0.87	1.84	2.7058 (10)	173
O8—H8A⋯N1 vii	0.87	1.98	2.8457 (9)	179
O8—H8B⋯O8 viii	0.87	1.91	2.7716 (13)	170
O8—H8C⋯O5 v	0.87	1.93	2.7944 (10)	176

The following are the symmetry codes for the structure: (i) x, y − 1, z; (ii) x − 1, y, z; (iii) x − 1, y + 1, z; (iv) −x + 1, −y + 1, −z + 1; (v) −x + 2, −y + 1, −z; (vi) x + 1, y − 1, z; (vii) −x + 1, −y + 1, −z; (viii) −x + 2, −y, −z.

and Figure 2).

2.3. DFT Results

The optimized structure of 4-(dimethylamino)pyridin-1-ium 2-methyl-4-oxo-4H-pyrido[1,2-a]pyrimidine-3-carboxylate by itself is illustrated in Figure 3a. The comparison of the X-ray and optimized structures in Figure 3c shows that the calculated bond distances, bond angles, and dihedral angles are in good agreement with the experimental data. In the X-ray structure (Figure 3b), the interaction between the two ions occurs through π-stacking interactions (Figure 3b). However, the optimization only considered the two ions in the gas phase and did so in the absence of the hydration waters. With their absence, their hydrogen bonding to the ions is not included in the calculations, and two hydrogen bonds are formed between the carboxylate group lone pairs in the 2-methyl-4-oxo-4H-pyrido[1,2-a]pyrimidine-3-carboxylate anion and the aromatic C–H units of the 4-(dimethylamino)pyridin-1-ium cation (Figure 3a), suggesting that these interactions outweigh π-stacking interactions in this scenario.

Table 2. The selected experimental and optimized structure parameters of 5.

	Bond Lengths (Å)			Bond Angles (°)
	Cal	X-ray	ΔL(Å)		Cal	X-ray	ΔA (°)
O1-C22	1.265	1.259 (4)	0.01	O1-C22-O2	125.15	128.43 (8)	3.29
O2-C22	1.244	1.259 (2)	0.01	O1-C22-C16	125.15	114.59 (9)	10.55
C16-C22	1.514	1.530 (3)	0.02	O3-C17-C16	127.44	128.82 (6)	1.39
O3-C17	1.233	1.233 (5)	0.00	C17-N5-C14	121.18	121.31 (8)	0.13
N4-C14	1.330	1.318 (7)	0.01	N5-C14-N4	122.43	122.61 (9)	0.19
N5-C14	1.381	1.398 (5)	0.02	C26-N25-C39	123.00	119.66 (9)	3.33
N23-C29	1.351	1.365 (4)	0.01	O1-C22-C16-C15	−124.14	−118.98 (6)	5.15
N23-C31	1.346	1.359 (0)	0.01	O1-C22-C16-C17	57.03	60.86 (8)	3.83
N25-C26	1.338	1.346 (6)	0.01	O3-C17-C16-C22	−2.97	3.78 (4)	6.75
N25-C35	1.462	1.458 (6)	0.00	C6-N5-C17-O3	3.41	−2.28 (6)	5.70
N25-C39	1.459	1.477 (0)	0.02	C27-C26-N25-C39	−1.99	−1.99 (2)	0.00
C26-C27	1.424	1.422 (3)	0.00	C27-C26-N25-C35	−176.34	−176.34 (1)	0.00
C27-C29	1.367	1.366 (2)	0.00	C33-C26-N25-C35	4.16	4.15 (8)	0.00

presents the selected experimental and calculated geometrical parameters of 4-(dimethylamino)pyridin-1-ium 2-methyl-4-oxo-4H-pyrido[1,2-a]pyrimidine-3-carboxylate. The discrepancies between the experimental and calculated bond lengths, bond angles, and torsion angles are not significant, with the maximum differences being less than 0.02 Å, 10.55, and 7 degrees, respectively. These minor variations are consistent with the superposition in Figure 3c.

2.4. Hirshfeld Surface Analysis

The hydrogen bonding pattern of the HS of 5 mapped over d_norm is illustrated in Figure 4. The figure shows that strong intermolecular hydrogen bonds are formed between the lone pairs of the carboxylate groups of 2-methyl-4-oxo-4H-pyrido[1,2-a]pyrimidine-3-carboxylate and the NH and CH of the 4-(dimethylamino)pyridin-1-ium cation, with lengths of 2.081 and 2.883 Å, respectively.

Figure 5 shows the electrostatic potential of 5, with the CO groups located in the red region indicating that they act as hydrogen bond acceptors. The amine group is located in the blue region, indicating that it acts as a hydrogen bond donor.

Figure 6 displays the 2D fingerprint plots of 5, which show that the most prevalent interatomic contacts between the units of 5 were hydrogen atoms (H⋯H, accounting for 50.5% of the total) and hydrogen bonds O⋯H/H⋯O (accounting for 31.7% of the total).

2.5. ADMET and Druglikeness Prediction of 5

The supplementary material contains the calculated ADMET properties of 5, as well as its anionic (F1) and cationic (F2) components, which are presented in Tables S1–S5. These show that 5 adheres to Lipinski’s rule of five and has a lipophilicity value (MlogP) of 0.68, which is lower than the threshold of 4.15 (Tables S2 and S5), indicating good druglikeness properties. The topological surface area (TPSA) of 5 was calculated to be between 78–125 Ų (Table S1). This suggests that the compound is likely to be orally absorbed, and its bioavailability score of 0.55 (Table S5) further supports this conclusion. The bioavailability of 5 is also visualized using bioavailability radars (Figure 7), which show that 5 falls within the pink area of the polygon, except for the unsaturation parameter, which is still within the polygon but outside the pink area. This suggests that 5 may have a good oral bioavailability (Figure S1). The pharmacokinetic properties in Table S4 indicate that 5 has a high gastrointestinal (GI) absorption, and the lack of penetration through the Blood–Brain Barrier (BBB) is shown in Figure 8. To predict the potential biological targets of 5, a pie chart was generated, which suggests that 5 may function as an inhibitor of carbonic anhydrase I (Figure 9).

2.6. Molecular Docking Study

To validate the potential inhibitory effect of 5 on carbonic anhydrase I (CAI), a docking study was conducted, which examined the binding affinity of the individual components of 5 with the CAI binding site.

Table 3. Binding energies, hydrogen bonds, and the number of closest residues to the docked components F1 and F2 of 5.

	Free Binding Energy (kcal/mol)	H-Bonds (HBs)	Number of Closest Residues to the Docked Ligand in the Active Site *
F1	−5.54	3	7
F2	−3.72	1	5

* displays the number of amino acids in the active site of carbonic anhydrase I that interact with F1 and F2.

presents the binding energies of the F1-DNA-PK and F2-DNA-PK complexes, the number of hydrogen bonds formed between the docked molecules and the active site residues of CAI, and the number of amino acids in closest proximity to the docked compounds.

Both F1 and F2 components of 5 are able to fit into the binding site of carbonic anhydrase I with relative ease and form stable complexes with its amino acids, as evidenced by their binding energies of −5.54 and −3.72 kcal-mol⁻¹ for F1-CAI and F2-CAI, respectively. The negative binding energies suggest that the inhibition of carbonic anhydrase I by 5 is thermodynamically favorable and occurs spontaneously. Figure 10 illustrates the 2D and 3D binding interactions between F1 and F2 with the amino acids located in the binding site of CAI. The results presented in Table 3 and Figure 10 suggest that the binding affinity of 5 with the CAI binding site is primarily attributed to F1. This is supported by the observation that the F1–CAI complex is more stable, which could be due to the higher number of hydrogen bonds formed between F1 and the amino acids HIS A119 and THR A199 of CAI. Specifically, the acetate group in F1 establishes three hydrogen bonds with THR199 and HIS A199 at distances of 2.85, 2.93, and 3.05 Å (i.e., these distances are between the non-hydrogen components of the interactions), respectively (Figure 10).

3. Materials and Methods

3.1. General Procedure

A solution containing 0.01 mol of 3-acetyl-4-hydroxy-6-methyl-2H-pyran-2-one 1 and 0.01 mol of 2-aminopyridine 2 was refluxed in butanol for 24 h. Upon removal of the reaction solvent under reduced pressure, the product is pyridopyrimidine 3, which exists in two tautomeric forms, 3a and 3b.

A solution containing a mixture of pyrido[1,2-a]pyrimidine 3 (1.5 g, 6.14 mmol), 0.1 mol of 4-dimethylaminopyridine 4, and potassium hydroxide (0.51 g, 9.21 mmol) in 30 mL of ethanol was stirred under reflux for 6 h. The reaction mixture was allowed to cool to room temperature, and the resulting residue was extracted with 15 mL of dichloromethane, followed by removal of the solvent under reduced pressure. The resulting solid was then recrystallized from diethyl ether, yielding the organic salt 5 as white crystals in a 60% yield (Scheme 2).

3.2. X-ray Crystallography

For the X-ray crystallographic analysis, a colorless, thick plate-like sample of C₁₇H₂₈N₄O₈ with approximate dimensions of 0.147 × 0.272 × 0.275 mm was used. X-ray intensity data were collected using a Bruker D8 QUEST PHOTON 3 diffractometer system equipped with a fine-focus sealed tube (MoKα, λ = 0.71073 Å) and a graphite monochromator, controlled by the APEX4 software [22]. The initial data obtained were transformed into F² values using SAINT [22], which also conducted a global refinement of the unit cell parameters. A numerical absorption correction and merging of equivalent reflections was performed by SADABS [22].

The structure was solved by dual space methods (SHELXT) and refined on F² by full-matrix, least-squares procedures (SHELXL). Hydrogen atoms attached to carbon were included as riding contributions in idealized positions, with isotropic displacement parameters tied to those of the attached atoms. Those bound to nitrogen were located in difference maps and refined with DFIX 0.91 0.01 instructions. Details of data collection and refinement are provided in

Table 4. Crystal and refinement data for 5.

Chemical Formula	C10H7N2O3·C7H11N2·5(H2O)
Mr	416.43
Crystal system, space group	Triclinic, $\mathrm{P}\overline{1}$
Temperature (K)	150
a, b, c (Å)	9.4302 (3), 9.7094 (3), 12.9484 (4)
α, β, γ (°)	77.686 (2), 71.945 (2), 66.414 (1)
V (Å3)	1027.60 (6)
Z	2
Radiation type	Mo Kα
µ (mm−1)	0.11
Crystal size (mm)	0.28 × 0.27 × 0.15
Data collection
Diffractometer	Bruker D8 QUEST PHOTON 3 diffractometer
Absorption correction	Numerical SADABS (Krause et al., 2015)
Tmin, Tmax	0.94, 0.98
No. of measured, independent andobserved [I > 2σ(I)] reflections	68,565, 7857, 6719
Rint	0.026
(sin θ/λ)max (Å−1)	0.771
Refinement
R[F2 > 2σ(F2)], wR(F2), S	0.042, 0.119, 1.03
No. of reflections	7857
No. of parameters	267
H-atom treatment	H-atom parameters constrained
Δρmax, Δρmin (e Å−3)	0.49, −0.25

.

3.3. Hirshfeld Surface Analysis

Compound 5 was analyzed with Crystal Explorer 3.0, where both the Hirshfeld surface (HS) and 2D fingerprint plots were calculated [23,24]. The HS of 5 was visualized with d_norm values ranging from −0.11 to 1.19 au, with the blue color indicating lower values and red color indicating higher values. Additionally, the 2D fingerprint plots were displayed with an expanded scale ranging from 0.6 to 2.8 Å.

3.4. DFT Calculations

The Gaussian 16 software package was used to optimize the starting geometry of 5 at the B3LYP/6-311++G(d,p) level of theory [25]. To ensure that the optimized geometry obtained was a stable configuration, frequency calculations were carried out [26]. The input Z-matrix parameters for the DFT calculations were obtained from the X-ray coordinates of 5, and the ESP surface and FMOs were computed using the same level of theory. The polarizable continuum model (PCM) was employed to account for solvent effects [27]. All DFT calculations were carried out using the Gaussian 16 software package [25].

3.5. In Silico ADMET and Druglikeness Properties

Compound 5 was subjected to ADMET (absorption, distribution, metabolism, excretion, and toxicity), druglikeness, pharmacokinetics, and physico-chemical property predictions using the Swiss ADME tool, which is available at http://www.swissadme.ch/ (accessed on 1 January 2023). In addition, the Swiss target prediction tool (http://www.swisstargetprediction.ch/ accessed on 1 March 2023) was used to predict the probable targets of 5 (accessed on 1 January 2023).

3.6. Molecular Docking Study

Based on the predictions from ADMET and druglikeness analysis, it is indicated that 5 has the potential to act as an inhibitor for carbonic anhydrase I. To investigate the feasibility of this approach, a molecular docking study was carried out using the Autodock software package [28] to dock 5 into the binding site of carbonic anhydrase I. The target enzyme and original docked ligand were obtained from the RCSB website (PDB code 2NN7) [29]. The accuracy of the molecular docking study was validated by re-docking the original ligand into the binding site, which resulted in an RMSD of 1.30 Å and a binding energy of −6.93 kcal-mol⁻¹. For additional information regarding the docking of 5 and the original ligand, please refer to our previous publication [30].

4. Conclusions

In this work, we report an interesting alkaline cleavage involving a retro-Claisen reaction of 3-acetoacetyl-2-methyl-pyrido[1,2-a]pyrimidin-4-one in the presence of potassium hydroxide and 4-dimethylaminopyridine as bases, leading to 4-(dimethylamino)pyridin-1-ium 2-methyl-4-oxo-pyrido[1,2-a]pyrimidine-3-carboxylate, 5. A plausible mechanism for the formation of 5 has been proposed. The crystal structure of 5 was determined by single-crystal X-ray diffraction analysis. The geometrical parameters for the cation and the anion are as expected for the given formulation. In the crystal, the ions stack along the normal to $\left(10\overline{2}\right)$ in the order cation-anion-anion-cation as the repeat unit. The intercontacts were determined through the analysis of Hirshfeld surface (HS) and 2D fingerprint plots. The structural parameters of 5 are relatively well reproduced by DFT calculations. The predicted ADMET, druglikeness, pharmacokinetics, and physico-chemical properties indicate that 5 may act as an inhibitor of carbonic anhydrase I, which is confirmed by its binding affinity using a molecular docking study.