Next Article in Journal
Study on Two-segment Electric-mechanical Composite Braking Strategy of Tracked Vehicle Hybrid Transmission System
Previous Article in Journal
Design and Implementation of On-Line Self-Tuning Control for PEM Fuel Cells
 
 
World Electric Vehicle Journal is published by MDPI from Volume 9 issue 1 (2018). Previous articles were published by The World Electric Vehicle Association (WEVA) and its member the European Association for e-Mobility (AVERE), the Electric Drive Transportation Association (EDTA), and the Electric Vehicle Association of Asia Pacific (EVAAP). They are hosted by MDPI on mdpi.com as a courtesy and upon agreement with AVERE.
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Different Novel Electric Machine Designs for Automotive Applications

1
FEAAM GmbH, D-85577 Neubiberg, Germany
2
Universiteat der Bundeswehr Muenchen, D-85577 Neubiberg, Germany
*
Author to whom correspondence should be addressed.
World Electr. Veh. J. 2013, 6(3), 712-718; https://doi.org/10.3390/wevj6030712
Published: 27 September 2013

Abstract

This paper presents three-different high efficiency and low costs electric machines types for automotive applications. For the PM machines with the single-layer concentrated windings, a novel stator topology with magnetic flux barriers in the stator teeth is used to increase the power density and the efficiency of the machine. Using this technique the material amount for the considered PM machine is reduced about 20% compared with the conventional design. For the asynchronous machines, two alternative solutions are presented; a new winding type with low space harmonic contents and also an ASM rotor with series connection of rotor bars solve the problem with high harmonics. Further, during the design of a new self-excited synchronous machine with concentrated winding, the high MMF winding harmonics are used to excite the rotor field winding.
Keywords: Concentrated winding; efficiency improvements; low costs; PM machine; self-excited synchronous machine; asynchronous machine Concentrated winding; efficiency improvements; low costs; PM machine; self-excited synchronous machine; asynchronous machine

Share and Cite

MDPI and ACS Style

Dajaku, G.; Gerling, D. Different Novel Electric Machine Designs for Automotive Applications. World Electr. Veh. J. 2013, 6, 712-718. https://doi.org/10.3390/wevj6030712

AMA Style

Dajaku G, Gerling D. Different Novel Electric Machine Designs for Automotive Applications. World Electric Vehicle Journal. 2013; 6(3):712-718. https://doi.org/10.3390/wevj6030712

Chicago/Turabian Style

Dajaku, Gurakuq, and Dieter Gerling. 2013. "Different Novel Electric Machine Designs for Automotive Applications" World Electric Vehicle Journal 6, no. 3: 712-718. https://doi.org/10.3390/wevj6030712

Article Metrics

Back to TopTop