Next Article in Journal
Active SMA Fibers’ Effect on the Pullout Behavior of a Steel Bar Embedded in Concrete
Previous Article in Journal
Lychee-like TiO2@Fe2O3 Core-Shell Nanostructures with Improved Lithium Storage Properties as Anode Materials for Lithium-Ion Batteries
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Materials
Volume 16
Issue 5
10.3390/ma16051946
materials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Hetero-Bimetallic Ferrocene-Containing Zinc(II)-Terpyridyl-Based Metallomesogen: Structural and Electrochemical Characterization

by
Evelyn Popa
1,
Adelina A. Andelescu
1,
Sorina Ilies (b. Motoc)
1,
Alexandru Visan
1,
Carmen Cretu
1,
Francesca Scarpelli
2,
Alessandra Crispini
2,
Florica Manea
3,* and
Elisabeta I. Szerb
1,*
1
“Coriolan Drăgulescu” Institute of Chemistry, Romanian Academy, 24 Mihai Viteazu Bvd., 300223 Timisoara, Romania
2
MAT-INLAB (Laboratorio di Materiali Molecolari Inorganici), Dipartimento di Chimica e Tecnologie Chimiche, Universitá della Calabria, Arcavacata, 87036 Rende, Italy
3
Department of Applied Chemistry and Engineering of Inorganic Compounds and Environment, Politehnica University of Timisoara, Bvd. Vasile Parvan No. 6, 300223 Timisoara, Romania
*
Authors to whom correspondence should be addressed.
Materials 2023, 16(5), 1946; https://doi.org/10.3390/ma16051946
Submission received: 6 February 2023 / Revised: 21 February 2023 / Accepted: 23 February 2023 / Published: 27 February 2023
(This article belongs to the Special Issue Advances in Transition Metal Compounds and Their Applications)
Browse Figures
Review Reports Versions Notes

Abstract

:
The synthesis, as well as the mesomorphic and electrochemical properties, of a hetero-bimetallic coordination complex able to self-assemble into a columnar liquid crystalline phase is reported herein. The mesomorphic properties were investigated by polarized optical microscopy (POM), differential scanning calorimetry (DSC) and Powder X-ray diffraction (PXRD) analysis. Electrochemical properties were explored by cyclic voltammetry (CV), relating the hetero-bimetallic complex behaviour to previously reported analogous monometallic Zn(II) compounds. The obtained results highlight how the presence of the second metal centre and the supramolecular arrangement in the condensed state pilot the function and properties of the new hetero-bimetallic Zn/Fe coordination complex.

1. Introduction

Functional homogeneous materials obtain single properties derived from functional moieties synthetically inserted into a molecular structure in a unique result that is not only the sum of these properties; often, new and synergistic properties are obtained, encouraging further research in this direction. However, the design of functional molecular structures to obtain performances for a certain application is still serendipitous; hence, fundamental research linking molecular structure-properties for structural complex molecules is compulsory. Metallomesogens (MMs) are functional materials combining the order and anisotropy properties of liquid crystals with the properties derived from a metal centre [1,2], resulting in polarized emission [3,4,5,6,7,8], peculiar magnetic properties [9,10,11,12,13,14,15], enhanced thermal and electrical conductivities [16,17,18,19], charge carrier mobilities [7,20,21,22,23], etc.
Previously, we showed that Zn(II) metallomesogens are promising candidates in electrochemical sensing, as they are able to generate hierarchically ordered metal oxide (MOx) nanoelectrode arrays in situ after electrochemical treatment [24]; moreover, the investigation of three electrode compositions obtained by varying the ratio between carbon nanotubes and Zn(II) metallomesogen showed the importance of both the weight ratio and supramolecular arrangements in the liquid crystalline state [25].
The insertion of a second metal centre into the molecular structure of MMs yields binuclear homo-metallic or hetero-bimetallic liquid crystals with an increasing structural and supramolecular complexity and further possible improvements or induction of synergistic properties. Some examples of binuclear metallomesogens found in the literature are synthetic challenges with investigation of their supramolecular “soft” assemblies [26,27,28,29,30,31,32]; in one case, the magnetic properties were determined [33]. However, due to the high transition temperatures typical for these hetero-bimetallic metallomesogens, the enthusiasm for synthesising such systems has diminished. Herein, we wish to recall attention to bimetallic MMs and to explore their electrochemical properties for sensing applications.
Against this background, a new coordination complex, namely Zn/Fe, the chemical structure of which is presented in Figure 1, was synthetized and structurally characterized.
The supramolecular architecture of complex Zn/Fe in the mesophase and its electrochemical properties were investigated and is presented in discussion with a previously reported analogue, complex Zn (Figure 1) [3], in an attempt to relate the presence of an additional metal center on the molecular structure - supramolecular structure – electrochemical property relationship. The electrochemical properties were determined using CNT paste working electrodes modified by a simple film-casting method with Zn/Fe and Zn coordination complexes (Figure 1) and a ferrocene-containing precursor (S4—Scheme 1) named Zn/Fe_CNT, Zn_CNT and Fc_CNT paste electrodes. Their electrochemical behaviours were comparatively studied by cyclic voltammetry (CV) in 0.1 M NaOH supporting electrolyte.

2. Results

2.1. Synthesis

The synthesis of complex Zn/Fe is presented in Scheme 1. Compounds S1 and S2 were synthesised by adapting a literature procedure [34], compound S3 was obtained as a byproduct of the Williamson etherification reaction between ethyl gallate and n-bromododecane and the ligand 4-(4-N,N-diethylbenzenamine)-2,6-di(pyridine-2-yl)pyridine (S5) was synthesized according to a literature procedure [35].
The synthesis of the final Zn/Fe coordination complex was carried out using a modified synthetic strategy with respect to that reported for the analogous Zn complex [3], which required the use of a silver salt of the benzoate precursor ligand (S4) and the formation of a Zn(II) dichloro derivative of the chelating ligand (S5). However, the presence of silver ions caused oxidation of the ferrocene units. The new complexation reaction was carried out by a simplified method adapted from a literature procedure [36]. In particular, the sodium salt of precursor S4 was formed and then reacted with ZnCl2. The resulting intermediate was used directly in the next step without purification. After a chelation reaction with ligand S5, the pure product was obtained by repeated recrystallisation, with improved yields. While the total yield of the complexation reaction that used the silver salt benzoate was 55% [3], herein, we obtained complex Zn/Fe in 70% yield.
Complex Zn/Fe was structurally characterized by FT-IR and 1H and 13C NMR spectroscopy, while its purity was determined by elemental analysis (see Supplementary Materials: Experimental Section). The IR spectrum contains the vibrational bands related to the two ligands and the ferrocene unit. In particular, the spectrum of complex Zn/Fe is almost superimposable on the spectrum of complex Zn, additionally containing the vibrational bands of a ferrocene unit centred at 1002, 924 and 486 cm−1 (νFc) [37]. The similar spectra and the separation of the stretching vibrations of COO− group (Δ) of 259 cm−1 (see Supplementary Materials: Experimental Section and Figure S1) suggests the same molecular structure for complex Zn/Fe as that for complex Zn: a neutral species with the metal centre pentacoordinated by a chelating tridentate terpyridine-based ligand and two monoanionic benzoate derivatives. Moreover, the coordination environment around the metal centre and the proposed molecular structure of complex Zn/Fe is supported by similar structures reported in the literature [38,39,40,41].
The structure and purity of the final Zn/Fe complex was confirmed by elemental analysis, as well as 1H , 13C NMR and AAS (see Supplementary Materials: Experimental Section and Figure S2). The thermal stability and presence of crystallisation solvent were determined by thermogravimetric analysis (TGA). A loss of one molecule of water was observed at around 50 °C, while the complex showed good thermal stability [42]; the weight loss from degradation became significant above ca. 300 °C and reached 5% at T5% = 324 °C (see Supplementary Materials Figure S3). The majority of the organic part decomposed between 300 and 500 °C, leaving residual zinc and iron oxides accounting for 8.17%.

2.2. Mesomorphism

The mesomorphic properties of complex Zn/Fe were determined by polarized optical microscopy (POM), differential scanning calorimetry (DSC) and powder X-ray diffraction (PXRD) studies.

2.2.1. POM and DSC Studies

During the first heating of the pristine complex, a first broad endothermic event spreading over several tens of degrees Celsius with a large enthalpy was detected by DSC (Figure 2b), while the complex transited into a birefringent fluid phase. Upon further heating, the birefringence persisted until the sample fully cleared at around 150 °C. Upon cooling, the complex arranged into a hexagonal columnar mesophase as can be derived from the mix mosaic texture (Figure 2a) and the presence of homeotropic zones. Upon further cooling, no sign of crystallisation could be detected either by POM or by DSC, while upon further heating and cooling, only one transition was observed by DSC (Figure 2b). The optical texture of the mesophase was preserved upon cooling, indicating the formation of anisotropic liquid crystalline glasses. The complexes have a high thermal stability, as demonstrated by repeated heating–cooling cycles.

2.2.2. PXRD Studies

The mesophase of complex Zn/Fe was investigated through PXRD analysis. The diffraction pattern of the Zn(II) complex, recorded at 85 °C upon cooling from the isotropic liquid (Figure 3a), presents an intense reflection at 2θ = 3.3° (d = 26.8 Å, Table 1) and other less intense reflections in the small–middle-angle region. This pattern can be indexed on the basis of a hexagonal columnar system (Colhex), with the first reflection assigned to the (10) interplanar distance. In addition, the semibroad diffraction peak (h0) in the wide-angle range precisely at 2θ = 26.2° (d = 3.4 Å) can be assigned to intracolumnar π-π stacking. It is reasonable to assume that, analogously to the recently reported parent Zn complex [3], the columnar self-assembly of molecules is driven by the instauration of π-π stacking between the terpyridine (tpy) cores. Moreover, the tpy groups must be rotated 120° ca. relative to each other in order to uniformly distribute the aliphatic chains around the aromatic cores [3]. It is worth noting that the parent Zn complex is characterized by a 3D hexagonal mesophase, with a high degree of intracolumnar order, whereas the Zn/Fe compound generates a less ordered 2D mesophase. This observation can be explained by the fact that in complex Zn/Fe, the ferrocene moiety, which is incorporated in two alkyl chains, probably interferes with the periodic segmentation of columns responsible for the three-dimensional order observed in the mesophase of complex Zn [3].
Finally, once generated upon cooling from the isotropic state, the mesophase of complex Zn/Fe remains frozen at room temperature (Figure 3b), with minimal d and cell parameter changes (Table 1).
It is worth recalling that the analogues structural Zn(II) coordination complex based on a non-substituted terpyridine (lacking the apical N,N-diethylbenzenamine group) reduces the symmetry of the complex, and despite the pentacoordination around the metal centre and the bulky, voluminous structure, the resulting complex arranges into smectic-type liquid crystalline phases [24].

2.3. Electrochemistry

A CNT paste working electrode was modified by a simple film-casting method with Zn/Fe metallomesogen to obtain the Zn/Fe_CNT paste electrode, which was characterized in comparison with the paste electrodes based on the Zn coordination complex and the ferrocene-containing precursor (S4) (Zn_CNT and Fc_CNT, respectively) obtained under similar conditions.
The electrochemical behaviour of Zn/Fe_CNT was studied by cyclic voltammetry (CV) within the potential range of −1.5 V/SCE to +1 V/SCE considering the manifestation of both ferrocene and ferrocenium redox systems [44,45,46]. The comparative voltammograms recorded in 0.1 M NaOH supporting the electrolyte on Zn/Fe_CNT in comparison with Zn_CNT are shown in Figure 4a, while a comparison with the ferrocene precursor (Fc_CNT) is presented in Figure 4b. The voltammetric behaviour of the liquid crystalline zinc coordination complex organised in a smectic mesophase previously reported by our group in reference [24] was also considered to evaluate an eventual influence of the type and symmetry of the mesophase on the electrochemical response of the paste electrode.
To study the comparative electrochemical behaviours, each material was used as a modifier for the CNT paste electrode by film-casting method. The significant differences between the current values are due to the varying degree of the CNT paste electrode surface coverage (Γ) (Table 2), as determined for each material based on the relation between peak current (CV curves) and the scan rate [47] using equation (1):
I p = n 2 × F 2 × v × A × Γ / 4 R × T
where n is the number of exchanged electrons, F is the Faraday, A is the area of the electrode surface and Γ is the surface coverage.
The different degrees of the CNT paste electrode surface coverages achieved by film-casting method with Zn/Fe, Zn coordination complexes or the S4 precursor are due to the different material consistencies and sorption affinities for CNT.
The shape of CVs recorded for the Zn_CNT paste electrode was very similar that recorded for the liquid crystalline Zn(II) coordination complex organised in the previously reported smectic mesophase [24], except the potential of the cathodic peak characteristic of metallic zinc and zinc oxide formation, which is less negative for the Zn_CNT paste electrode. This may be related to the different supramolecular arrangement in the mesophase (column vs. layers).
The anodic branch of the CV shape recorded on the Fc_CNT electrode is in accordance with the reported literature regarding ferrocene/ferrocenium redox couples based on reaction (2) [48]:
C p 2 F e ↔ C p 2 F e + + e −
within the cathodic branch, one oxidation peak occurred at about −0.66 V vs. SCE and the corresponding reduction peak at about −1.00 V vs. SCE, which corresponds to the Fe/Fe(II) redox couple [49,50,51,52]. This couple is not evidenced for Zn/Fe_CNT because it is probably overlayed with zinc reduction and stripping couples.
All anodic peaks corresponding to zinc stripping and zinc oxide dissolution and all cathodic peaks corresponding to zinc reduction and zinc oxide formation under oxygen reduction reaction conditions are manifested for Zn/Fe_CNT and Zn_CNT paste electrodes, which assure the presence of zinc redox systems. However, a higher magnitude of current is manifested in the former due to the overlay of both zinc and ferrocene redox systems. The ferrocene/ferrocenium redox couple is manifested in the Zn/Fe_CNT paste electrode, with the reductive back peak less defined than the oxidative forward peak. This may be due to the incorporation of ferrocenium within the Zn(II) coordination complex structure, which stabilises it sufficiently such that its reduction becomes thermodynamically unfavourable [48].
To accurately study the effect of ferrocene grafted into the molecular structure of Zn(II) metallomesogen and the contribution of the different supramolecular arrangements (a 2D columnar hexagonal phase in Zn/Fe and a 3D columnar hexagonal phase in Zn metallomesogens) to the electrochemical features, the scan rate effect on the shapes of CVs recorded on each of the Zn/Fe_ CNT, Zn_CNT and Fe_CNT paste electrodes was investigated. The series of CVs recorded at scan rates ranging from 0.01 V∙s−1 to 0.20 V∙s−1 on all electrodes is presented in Figure 5a–c.
For each modified electrode, the anodic and cathodic peaks are marked and presented in Table 3 for comparison. All anodic and cathodic peak currents increased linearly with the square root of the scan rate (Figure S4a–c) because all anodic and cathodic processes described in Table 3 are diffusion-controlled.
It can be noticed that the Zn/Fe_CNT paste electrode based on the 2D columnar hexagonal metallomesogen exhibited electrochemical behaviour based on the combination of the Zn_ CNT paste electrode (3D columnar hexagonal metallomesogen based on a similar molecular structure Zn(II) coordination complex lacking ferrocene units) and the Fc_CNT paste electrode (precursor containing ferrocene units). In the cathodic branch, the electrochemical behaviour of the Zn complex is predominant (no Fe/Fe(II) redox couple is manifested), while in the anodic branch, the ferrocene/ferrocenium redox couple is better manifested. An anodic peak is evidenced at a potential value of about +0.290 V vs. SCE (AI) before a ferrocene oxidation peak (AII) recorded at about +0.600, which can be attributed to zinc oxide dissolution with the formation of zincate. This peak is clearer at the higher scan rate, evidencing fast kinetics of the zinc oxidation dissolution process.
Considering the integration of ferrocene units into the molecular structure of the Zn(II) coordination complex, the redox couple of ferrocene/ferrocenium was comparatively analysed in the Zn/Fe_CNT paste electrode and the Fc_ CNT paste electrode. The details of various current and potential parameters determined based on Figure 5b,c are presented in Table 4 for the Fc_CNT paste electrode and in Table 5 for the Zn/Fe_CNT paste electrode.
As the scan rate was increased, the potential value of the anodic peak shifted to more positive values, while the cathodic peak values became more negative. Smaller differences between the anodic and cathodic potential values (ΔEp) were obtained at a low scan rate than at a fast scan rate (Table 4 and Table 5) for both electrodes. A larger difference was obtained for the Zn/Fe_CNT paste electrode (0.310 V) than the Fc_CNT paste electrode (0.020 V) at a scan rate of v = 0.01 Vꞏs−1. When the scan rate was increased by 20 times, an almost 1.45-fold increase in ΔEp was observed for the Zn/Fe_CNT paste electrode in comparison with a 10-fold increase for the Fc_CNT paste electrode. The high ΔEp value indicates a quasireversible charge–transfer process. When the scan rates increased, the changes in the ΔEp values provided information about the partial control of the charge–transfer step relative to the diffusion step. Theoretically, there no change occurred in ΔEp with the scan rates when the charge–transfer was fast and completely reversible [44]. Additionally, the ratio between the anodic and cathodic peak currents should be close to the theoretical value of 1 for all the scan rates used for a reversible system. Taking these factors into considerations our findings were corroborated; the Fc/Fc+ couple was closer to the ideal reversible system in the Fc_CNT paste electrode considering the ΔEp values and the ratio between the anodic and cathodic peak currents. However, smaller changes of the ΔEp values with scan rates were observed for the Zn/Fe_CNT paste electrode, indicating a faster charge–transfer rate. The occurrence of electron transfer to and from the redox centres of the ferrocene is also indicated by the linearity of the anodic peak current vs. the square root of the scan rate for both electrodes (Figure S4b,c).

3. Materials and Methods

3.1. Synthesis

All commercially available starting materials and solvents were used as received without further purification. Ferrocene, anhydrous AlCl3, NaBH4, anhydrous dichloromethane and tetrahydrofuran were purchased from Sigma Aldrich, while hexane and ethyl acetate were purchased from Carlo Erba; HPLC-grade dichloromethane was purchased from Honeywell. A Bruker Avance III HD—500 MHz spectrometer was used to record 1H and 13C NMR experiments in CDCl3 or CD2Cl2. A Flash 2000 microanalyser from Thermo Fisher Scientific was used to perform elemental analyses (CHN), while the percentage of Zn(II) was determined using a SensAA flame atomic absorption spectrometer (GBC Scientific Equipment, Braeside, Australia). The instrument was equipped with a zinc hollow cathode lamp (detection limit: 0.4–1.5 mg/L, integration time 3 s). The flame used was an air–acetylene mixture. Two determinations were made, and the average absorbance value was used.

3.2. Optical and Thermal Studies

An Olympus BX53M polarizing microscope (POM) equipped with a Linkam hot stage and an Olympus UC90 camera was used to observe the optical mesophase textures of complex Zn/Fe. Thermal decomposition was carried out using a TGA/SDTA 851-LF 1100 Mettler Toledo thermogravimetric analyser, with the experiments conducted in a nitrogen atmosphere in the temperature range of 25–800 °C with a heating rate of 10 °C min−1. Enthalpies and transition temperatures were recorded using a Q1000 apparatus from TA Instruments. The apparatus was calibrated with indium; three heating/cooling cycles were performed for each sample, with a heating and cooling rate of 10 °C/min.

3.3. Powder X-ray Diffraction (PXRD) Analysis

A Bruker D2-Phaser equipped with Cu Kα radiation (λ = 1.5418 Å) and a Lynxeye detector at 30 kV and 10 mA with a step size of 0.01° (2θ) were used to record the PXRD patterns of the Zn/Fe mesophase. The sample was heated and cooled at a rate of 5 °C min−1 using a Sil’tronix zero-diffraction plate placed on a CaLCTec (Calabria Liquid Crystal Technology, Arcavacata di Rende, Italy) heating stage.

3.4. Electrochemical Studies

Electrochemical measurements were performed at ambient room temperature (∼20 °C) using GPES 4.9 software controlled by an Autolab PGSTAT 302potentiostat/galvanostat (EcoChemie, Utrecht, the Netherlands). A carbon nanotube (CNT) paste electrode with a disk diameter of 3.0 mm and a platinum plate characterized by a geometrical surface area of 1.0 cm2 were used as a working and counter electrode, respectively. A saturated calomel electrode (SCE) was used for a reference electrode. The saturated calomel reference electrode (SCE) was used to record the electrode potentials. The CNT paste working electrode was modified by simple film-casting method with Zn/Fe, Zn and ferrocene-containing precursor (S4) and named Zn/Fe_CNT paste, Zn_CNT paste and Fc_CNT paste electrodes, respectively. Their electrochemical behaviours were comparatively studied by cyclic voltammetry (CV) in 0.1 M NaOH supporting electrolyte. After immersion in the material, the electrode surface was dried at room temperature. For each sample, at least five scans of CV were recorded at a scan rate of 0.05 V∙s−1 to achieve the steady state of the modified electrode.

4. Conclusions

A new bimetallic coordination complex containing a pentacoordinated Zn(II) metal centre by a tridentate chelating terpyridine-based ligand and two monoanionic gallate ligands containing ferrocene units was synthesised and structurally characterized. The complex, like its previously reported structurally analogous parent complex (Zn) [3] lacking ferrocene units, exhibited liquid crystalline properties. While complex Zn arranged into a 3D columnar hexagonal mesophase, complex Zn/Fe organised into a regular 2D columnar hexagonal phase due to the presence of ferrocene units in the alkyl chain segments, preventing the segmentation of stacked molecules into groups.
Aiming to investigate the molecular relationship between structure and supramolecular properties and the relationship between structure and electrochemical properties, the electrochemical behaviour of complex Zn/Fe was characterized in comparison with the analogous Zn complex lacking ferrocene units and a ferrocene-containing organic derivative (precursor S4) by modification of a CNT paste electrode using a simple film-casting method. Different degrees of CNT paste electrode surface coverage were achieved depending on the modifier consistency and its affinity to CNT in the following order: S4 > Zn/Fe > Zn.
The electrochemical features of Zn/Fe_CNT paste electrode consisted of a combination of Zn_CNT and Fc_CNT paste electrodes characterized by a good activity of the ferrocene/ferrocenium redox couple in the anodic branch. However, a quasireversible Fc/Fc+ couple in the Zn/Fe_CNT paste electrode vs. ideal reversible behaviour indicated a possible cooperative effect of the ferrocene within the zinc metallomesogen structure, assuring electron transfer to and from the redox centres of the ferrocene.
Comparison of the CVs of Zn_CNT paste electrode based on the 3D columnar hexagonal Zn(II) metallomesogen with the structural analogue organised in a smectic phase [24] revealed a possible contribution depending on the potential value of the cathodic peak characteristic of metallic zinc and zinc oxide formation. However, comparison of the electrochemical fingerprint of the liquid crystalline Zn(II) coordination complex organised in a columnar mesophase in the cathodic branch with that of the Fc/Fc+ in the anodic branch indicates the versatility of Zn/Fe metallomesogen for many electrochemical applications, e.g., sensing, catalysis, batteries, etc.

Supplementary Materials

The following are available online at https://www.mdpi.com/article/10.3390/ma16051946/s1, Experimental section: synthesis; Figure S1: FT-IR spectra of Zn/Fe and Zn metallomesogens; Figure S2: 1H NMR spectra of complex Zn/Fe; Figure S3: TGA and DTG traces of complex Zn/Fe; Figure S4: Electrochemical studies.

Author Contributions

Conceptualization, E.I.S. and F.M.; methodology, E.I.S., A.C. and F.M.; investigation, E.P., A.A.A., S.I., A.V., C.C. and F.S.; resources, E.I.S.; data curation, E.I.S., A.C. and F.M.; writing—original draft preparation, E.I.S., A.C. and F.M.; writing—review and editing, E.I.S., A.C. and F.M.; project administration, E.I.S.; funding acquisition, E.I.S. All authors have read and agreed to the published version of the manuscript.

Funding

This work was supported by a grant from the Romanian Ministry of Education and Research, CNCS—UEFISCDI, project number PN-III-P4-ID-PCE-2020-1958, within PNCDI III.

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Not applicable.

Acknowledgments

We acknowledge the Romanian Academy, Program 4 and the project RO-OPENSCREEN, MySMIS code: 127952, Contract no. 371/20.07.2020, co-financed by European Regional Development Fund through the Competitiveness Operational Program 2014-2020, for support. This work was supported by a grant of the Ministry of Research, Innovation and Digitization, CNCS/CCCDI—UEFISCDI, project number PN-III-P4-ID-PCE-2020-1958, within PNCDI III; FS is grateful to the project PON “Ricerca e Innovazione” 2014–2020, Asse IV “Istruzione e ricerca per il recupero,” and Azione IV.6 “Contratti di ricerca su tematiche Green”.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Szerb, E.I.; Crispini, A.; Aiello, I.; La Deda, M. Part XII: Inorganic Materials for Optoelectronics, 62: Liquid Crystals. In Springer Handbook of Inorganic Photochemistry; Bahnemann, D.W., Patrocinio, A.O.T., Zysman-Colman, E., Eds.; Springer: Cham, Switzerland, 2022; pp. 1811–1848. [Google Scholar]
  2. Cuerva, C.; Cano, M.; Lodeiro, C. Advanced Functional Luminescent Metallomesogens: The Key Role of the Metal Center. Chem. Rev. 2021, 121, 12966–13010. [Google Scholar] [CrossRef] [PubMed]
  3. La Deda, M.; Di Maio, G.; Candreva, A.; Heinrich, B.; Andelescu, A.-A.; Popa, E.; Voirin, E.; Badea, V.; Amati, M.; Costişor, O.; et al. Very intense polarized emission in self-assembled room temperature metallomesogens based on Zn(II) coordination complexes: An experimental and computational study. J. Mater. Chem. C 2022, 10, 115–125. [Google Scholar] [CrossRef]
  4. Yang, X.F.; Wu, X.G.; Zhou, D.; Yu, J.T.; Xie, G.H.; Bruce, D.W.; Wang, Y.F. Platinum-based metallomesogens bearing a Pt(4,6-dfppy)(acac) skeleton: Synthesis, photophysical properties and polarised phosphorescence application. Dalton Trans. 2018, 47, 13368–13377. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  5. Chiriac, L.F.; Ganea, P.C.; Manaila-Maximean, D.; Pasuk, I.; Circu, V. Synthesis and thermal, emission and dielectric properties of liquid crystalline Eu(III), Sm(III) and Tb(III) complexes based on mesogenic 4-pyridone ligands functionalized with cyanobiphenyl groups. J. Mol. Liq. 2019, 290, 111184. [Google Scholar] [CrossRef]
  6. Wu, X.G.; Xie, G.H.; Cabry, C.P.; Xu, X.Y.; Cowling, S.J.; Bruce, D.W.; Zhu, W.G.; Baranoff, E.; Wang, Y.F. Linearly polarized electroluminescence from ionic iridium complex-based metallomesogens: The effect of aliphatic-chain on their photophysical properties. J. Mater. Chem. C 2018, 6, 3298–3309. [Google Scholar] [CrossRef] [Green Version]
  7. Geng, H.; Luo, K.J.; Zou, G.; Zhao, L.; Wang, H.; Li, Q.; Ni, H.L. Have ambipolar carrier transmission property based on novel platinum(II) complexes: Synthesis, photophysical properties, liquid crystalline characteristics, polarized luminescence. Dyes Pigm. 2018, 149, 82–91. [Google Scholar] [CrossRef]
  8. Wang, Y.F.; Fan, J.; Shi, J.W.; Qi, H.R.; Baranoff, E.; Xie, G.H.; Li, Q.G.; Tan, H.; Liu, Y.; Zhu, W.G. Influence of integrated alkyl-chain length on the mesogenic and photophysical properties of platinum-based metallomesogens and their application for polarized white OLEDs. Dyes Pigm. 2016, 133, 238–247. [Google Scholar] [CrossRef]
  9. Akiyoshi, R.; Zenno, H.; Sekine, Y.; Nakaya, M.; Akita, M.; Kosumi, D.; Lindoy, L.F.; Hayami, S. A Ferroelectric Metallomesogen Exhibiting Field-Induced Slow Magnetic Relaxation. Chem. Eur. J. 2022, 28, e202103367. [Google Scholar] [CrossRef]
  10. Liu, S.T.; Zhu, Z.H.; Li, X.L.; Tang, J.K. New iron(II) spin-crossover metallomesogen with long aliphatic chain terminated by a C=C bond. Inorg. Chem. Front. 2022, 9, 267–274. [Google Scholar] [CrossRef]
  11. Fitzpatrick, A.J.; Martinho, P.N.; Gildea, B.J.; Holbrey, J.D.; Morgan, G.G. Robust Room Temperature Hysteresis in an Fe-III Spin Crossover Metallomesogen. Eur. J. Inorg. Chem. 2016, 2025–2029. [Google Scholar] [CrossRef] [Green Version]
  12. Knyazev, A.A.; Krupin, A.S.; Kovshik, A.P.; Galyametdinov, Y.G. Effect of Magnetic and Electric Field on the Orientation of Rare-Earth-Containing Nematics. Inorg. Chem. 2021, 60, 661–671. [Google Scholar] [CrossRef] [PubMed]
  13. Rajendiran, K.; Yoganandham, S.T.; Arumugam, S.; Arumugam, D.; Thananjeyan, K. An Overview of liquid crystalline mesophase transition and photophysical properties of “f block,” “d block,” and (SCO) spin-crossover metallomesogens in the optoelectronics. J. Mol. Liq. 2021, 321, 114793. [Google Scholar] [CrossRef]
  14. Gruzdev, M.S.; Chervonova, U.V.; Vorobeva, V.E.; Kolker, A.M. Highly branched mesomorphic iron(III) complexes with a long alkyl fragments on periphery. J. Mol. Liq. 2020, 320, 114505. [Google Scholar] [CrossRef]
  15. Wang, X.J.; Valldor, M.; Spielberg, E.T.; Heinemann, F.W.; Meyer, K.; Mudring, A.V. Paramagnetic iron-containing ionic liquid crystals. J. Mol. Liq. 2020, 304, 112583. [Google Scholar] [CrossRef]
  16. Park, M.; Kang, D.G.; Ko, H.; Rim, M.; Tran, D.T.; Park, S.; Kang, M.; Kim, T.W.; Kim, N.; Jeong, K.U. Molecular engineering of a porphyrin-based hierarchical superstructure: Planarity control of a discotic metallomesogen for high thermal conductivity. Mater. Horiz. 2020, 7, 2635–2642. [Google Scholar] [CrossRef]
  17. Rossi, L.; Huck-Iriart, C.; Giovanetti, L.; Antonel, P.S.; Marceca, E.; Cukiernik, F.D. Mesogenic Coordination Polymers Based on Ru-2(II,II)-Paddle-Wheel Units Exhibit High Electrical Conductivity. Eur. J. Inorg. Chem. 2022, 2022, e202100766. [Google Scholar] [CrossRef]
  18. Yang, B.; Ni, H.L.; Wang, H.F.; Hu, Y.H.; Luo, K.J.; Yu, W.H. Enhanced Synchronously Emission Dissymmetry Factor and Quantum Efficiency of Circularly Polarized Phosphorescence from Point-Chiral Cyclometalated Platinum(II) Liquid Crystal. J. Phys. Chem. C 2020, 124, 23879–23887. [Google Scholar] [CrossRef]
  19. Cuerva, C.; Campo, J.A.; Cano, M.; Sanz, J.; Sobrados, I.; Diez-Gómez, V.; Rivera-Calzada, A.; Schmidt, R. Water-Free Proton Conduction in Discotic Pyridylpyrazolate-based Pt(II) and Pd(II) Metallomesogens. Inorg. Chem. 2016, 55, 6995–7002. [Google Scholar] [CrossRef]
  20. Zou, G.; Zhang, S.R.; Feng, S.S.; Li, Q.H.; Yang, B.; Zhao, Y.; Luo, K.J.; Wen, T.B. Cyclometalated Platinum(II) Metallomesogens Based on Half-Disc-Shaped beta-Diketonate Ligands with Hexacatenar: Crystal Structures, Mesophase Properties, and Semiconductor Devices. Inorg. Chem. 2022, 61, 11702–11714. [Google Scholar] [CrossRef]
  21. Zhao, L.; Yang, B.; Zeng, L.W.; Luo, K.J.; Wang, H.F.; Ni, H.L.; Yang, C.L.; Li, Q. Tetradentate platinum(II) complexes: Synthesis, photophysical properties, liquid crystalline characteristics and charge transport behaviour. Dyes Pigm. 2019, 164, 398–406. [Google Scholar] [CrossRef]
  22. Cuerva, C.; Campo, J.A.; Cano, M.; Schmidt, R. Lamellar columnar liquid-crystalline mesophases as a 2D platform for anhydrous proton conduction. J. Mater. Chem. C 2019, 7, 10318–10330. [Google Scholar] [CrossRef]
  23. Cuerva, C.; Campo, J.A.; Cano, M.; Schmidt, R. Nanostructured discotic Pd(II) metallomesogens as one-dimensional proton conductors. Dalton Trans. 2017, 46, 96–105. [Google Scholar] [CrossRef] [PubMed]
  24. Andelescu, A.A.; Ilies (b. Motoc), S.; Cretu, C.; Popa, E.; Marinescu, S.; Heinrich, B.; Manea, F.; Negrea, S.; Donnio, B.; Szerb, E.I. Pentacoordinated Liquid Crystalline Zn(II) Complex Organized in Smectic Mesophase: Synthesis, Structural and Electrochemical Properties. Appl. Sci. 2022, 12, 8306. [Google Scholar] [CrossRef]
  25. Negrea, S.; Andelescu, A.A.; Ilies (b. Motoc), S.; Cretu, C.; Cseh, L.; Rastei, M.; Donnio, B.; Szerb, E.I.; Manea, F. Design of Nanostructured Hybrid Electrodes Based on a Liquid Crystalline Zn(II) Coordination Complex-Carbon Nanotubes Composition for the Specific Electrochemical Sensing of Uric Acid. Nanomaterials 2022, 12, 4215. [Google Scholar] [CrossRef]
  26. Binnemans, K.; Lodewyckx, K.; Donnio, B.; Guillon, D. Mixed Copper—Lanthanide Metallomesogens. Chem. Eur. J. 2002, 8, 1101–1105. [Google Scholar] [CrossRef]
  27. Binnemans, K.; Lodewyckx, K.; Donnio, B.; Guillon, D. Mixed f-d Metallomesogens with an Extended Rigid Core. Eur. J. Inorg. Chem. 2005, 1506–1513. [Google Scholar] [CrossRef]
  28. Kadkin, O.N.; An, J.; Han, H.; Galyametdinov, Y.G. A Novel Series of Heteropolynuclear Metallomesogens: Organopalladium Complexes with Ferrocenophane-Containing Ligands. Eur. J. Inorg. Chem. 2008, 1682–1688. [Google Scholar] [CrossRef]
  29. Marcos, M.; Omenat, A.; Barberá, J.; Durán, F.; Serrano, J.L. Structural study of metallomesogens derived from tris-[2-(salicylideneamino)ethyl]amine. A molecular meccano. J. Mater. Chem. 2004, 14, 3321–3327. [Google Scholar] [CrossRef]
  30. Paschke, R.; Liebsch, S.; Tschierske, C.; Oakley, M.A.; Sinn, E. Synthesis and Mesogenic Properties of Binuclear Copper(II) Complexes Derived from Salicylaldimine Schiff Bases. Inorg. Chem. 2003, 42, 8230–8240. [Google Scholar] [CrossRef]
  31. Serrette, A.G.; Lai, C.K.; Swager, T.M. Complementary Shapes in Columnar Liquid Crystals: Structural Control in Homo- and Heteronuclear Bimetallic Assemblies. Chem. Mater. 1994, 6, 2252–2268. [Google Scholar] [CrossRef]
  32. Chico, R.; de Domingo, E.; Dominguez, C.; Donnio, B.; Heinrich, B.; Termine, R.; Golemme, A.; Coco, S.; Espinet, P. High One-Dimensional Charge Mobility in Semiconducting Columnar Mesophases of Isocyano-Triphenylene Metal Complexes. Chem. Mater. 2017, 29, 7587–7595. [Google Scholar] [CrossRef] [Green Version]
  33. Szydłowska, J.; Krówczyński, A.; Pociecha, D.; Szczytko, J.; Budzowski, P.; Twardowski, A.; Górecka, E. Dinuclear Mesogens with Antiferromagnetic Properties. ChemPhysChem 2010, 11, 1735–1741. [Google Scholar] [CrossRef] [PubMed]
  34. Kumar, K.; Vulugundam, G.; Kondaiahb, P.; Bhattacharya, S. Co-liposomes of redox-active alkyl-ferrocene modified low MW branched PEI and DOPE for efficacious gene delivery in serum. J. Mater. Chem. B 2015, 3, 2318–2330. [Google Scholar] [CrossRef] [PubMed]
  35. Liu, D.; Zhang, M.; Du, W.; Hu, L.; Li, F.; Tian, X.; Wang, A.; Zhang, Q.; Zhang, Z.; Wu, J.; et al. A Series of Zn(II) Terpyridine-Based Nitrate Complexes as Two-Photon Fluorescent Probe for Identifying Apoptotic and Living Cells via Subcellular Immigration. Inorg. Chem. 2018, 57, 7676–7683. [Google Scholar] [CrossRef]
  36. Kondratenko, Y.; Fundamensky, V.; Ignatyev, I.; Zolotarev, A.; Kochina, T.; Ugolkov, V. Synthesis and crystal structure of two zinc-containing complexes of triethanolamine. Polyhedron 2017, 130, 176–183. [Google Scholar] [CrossRef]
  37. Radhakrishnan, S.; Paul, S. Conducting polypyrrole modified with ferrocene for applications in carbon monoxide sensors. Sens. Actuators B 2007, 125, 60–65. [Google Scholar] [CrossRef]
  38. Tsukamoto, T.; Aoki, R.; Sakamoto, R.; Toyoda, R.; Shimada, M.; Hattori, Y.; Asaoka, M.; Kitagawa, Y.; Nishibori, E.; Nakanoc, M.; et al. A simple zinc(II) complex that features multi-functional luminochromism induced by reversible ligand dissociation. Chem. Commun. 2017, 53, 3657–3660. [Google Scholar] [CrossRef] [PubMed]
  39. Ma, Z.; Lu, W.; Liang, B.; Pombeiro, A.J.L. Synthesis, characterization, photoluminescent and thermal properties of zinc(II) 4′-phenyl-terpyridine compounds. New J. Chem. 2013, 37, 1529–1537. [Google Scholar] [CrossRef]
  40. Ma, Z.; Cao, Y.; Li, Q.; Guedes da Silva, M.F.C.; Fraústo da Silva, J.J.R.; Pombeiro, A.J.L. Synthesis, characterization, solid-state photo-luminescence and anti-tumor activity of zinc(II) 4′-phenyl-terpyridine compounds. J. Inorg. Biochem. 2010, 104, 704–711. [Google Scholar] [CrossRef]
  41. Andelescu, A.-A.; Heinrich, B.; Spirache, M.A.; Voirin, E.; La Deda, M.; Di Maio, G.; Szerb, E.I.; Donnio, B.; Costisor, O. Playing with PtII and ZnII Coordination to Obtain Luminescent Metallomesogens. Chem. Eur. J. 2020, 26, 4850–4860. [Google Scholar] [CrossRef]
  42. Qin, L.; Liang, F.; Li, Y.; Wu, J.; Guan, S.; Wu, M.; Xie, S.; Luo, M.; Ma, D. A 2D Porous Zinc-Organic Framework Platform for Loading of 5-Fluorouracil. Inorganics 2022, 10, 202. [Google Scholar] [CrossRef]
  43. Godbert, N.; Crispini, A.; Ghedini, M.; Carini, M.; Chiaravalloti, F.; Ferrise, A.J. LCDiXRay: A user-friendly program for powder diffraction indexing of columnar liquid crystals. Appl. Cryst. 2014, 47, 668–679. [Google Scholar] [CrossRef] [Green Version]
  44. Bean, L.S.; Heng, L.Y.; Yamin, B.M.; Ahmad, M. The electrochemical behaviour of ferrocene in a photocurable poly(methyl methacrylate-co-2-hydroxylethyl methacrylate) film for a glucose biosensor. Bioelectrochem. 2005, 65, 157–162. [Google Scholar] [CrossRef] [PubMed]
  45. Bao, D.; Millare, B.; Xia, W.; Steyer, B.G.; Gerasimenko, A.A.; Ferreira, A.; Contreras, A.; Vullev, V.I. Electrochemical Oxidation of Ferrocene: A Strong Dependence on the Concentration of the Supporting Electrolyte for Nonpolar Solvents. J. Phys. Chem. A 2009, 113, 1259–1267. [Google Scholar] [CrossRef] [PubMed]
  46. Hu, M.-L.; Abbasi-Azad, M.; Habibi, B.; Rouhani, F.; Moghanni-Bavil-Olyaei, H.; Liu, K.-G.; Morsali, A. Electrochemical Applications of Ferrocene-Based Coordination Polymers. ChemPlusChem 2020, 85, 2397. [Google Scholar] [CrossRef]
  47. Eckermann, A.L.; Feld, D.J.; Shaw, J.A.; Meade, T.J. Electrochemistry of redox-active self-assembled monolayers. Coord. Chem. Rev. 2010, 254, 1769–1802. [Google Scholar] [CrossRef] [Green Version]
  48. Wu, H.; Lin, Q.; Batchelor-McAuley, C.; Compton, R.G. Nanoimpacts Reveal the Electron-Transfer Kinetics of the Ferrocene/Ferrocenium Couple Immobilised on Graphene Nanoplatelets. ChemElectroChem 2016, 3, 1478–1483. [Google Scholar] [CrossRef]
  49. Hampson, A.; Latham, R.J.; Marshall, A.; Giles, R.D. Some aspects of the electrochemical behaviour of the iron electrode in alkaline solutions. Electrochim. Acta 1974, 19, 397–401. [Google Scholar]
  50. Weinrich, H.; Come, J.; Tempel, H.; Kungl, H.; Eichel, R.-A.; Balke, N. Understanding the Nanoscale Redox- Behavior of Iron-Anodes for Rechargeable Iron-Air Batteries. Nano Energy 2017, 41, 706–716. [Google Scholar] [CrossRef]
  51. Hang, B.T. Electrochemical Properties of Fe2O3 Electrode in Alkaline Solution Containing K2S Additive. VNU J. Sci. Math. Phys. 2018, 34, 45–51. [Google Scholar]
  52. Geana, D.; El Miligy, A.A.; Lorenz, W.J. Electrochemical behaviour of iron in alkaline sulphate solutions. J. Appl. Electrochem. 1974, 4, 337–345. [Google Scholar] [CrossRef]
Materials 16 01946 g001 550
Figure 1. Molecular structure of complex Zn/Fe and the structurally analogous complex of Zn previously reported to lack ferrocene [3].
Figure 1. Molecular structure of complex Zn/Fe and the structurally analogous complex of Zn previously reported to lack ferrocene [3].
Materials 16 01946 g001
Materials 16 01946 sch001 550
Scheme 1. Synthesis of complex Zn/Fe: (i) SOCl2, toluene, 70 °C, overnight; (ii) ferrocene, AlCl3, DCM, 0 °C, r.t, overnight; (iii) AlCl3, NaBH4, THF, 0 °C, r.t, overnight; (iv) K2CO3, DMF, 80 °C, 24 h; (v) KOH, EtOH, ΔT; (vi) NaOH, 30 min, THF, EtOH, then ZnCl2 in EtOH, r.t., 24 h; (vii) tpyNEt2, CHCl3, MeOH, 24 h.
Scheme 1. Synthesis of complex Zn/Fe: (i) SOCl2, toluene, 70 °C, overnight; (ii) ferrocene, AlCl3, DCM, 0 °C, r.t, overnight; (iii) AlCl3, NaBH4, THF, 0 °C, r.t, overnight; (iv) K2CO3, DMF, 80 °C, 24 h; (v) KOH, EtOH, ΔT; (vi) NaOH, 30 min, THF, EtOH, then ZnCl2 in EtOH, r.t., 24 h; (vii) tpyNEt2, CHCl3, MeOH, 24 h.
Materials 16 01946 sch001
Materials 16 01946 g002 550
Figure 2. (a) POM texture of Zn/Fe upon first cooling at 50 °C (magnification 20×); (b) DSC traces of complex Zn/Fe.
Figure 2. (a) POM texture of Zn/Fe upon first cooling at 50 °C (magnification 20×); (b) DSC traces of complex Zn/Fe.
Materials 16 01946 g002
Materials 16 01946 g003 550
Figure 3. PXRD patterns of the mesophase of complex Zn/Fe registered upon cooling (second cycle) at 85 °C (a) and at 25 °C (b).
Figure 3. PXRD patterns of the mesophase of complex Zn/Fe registered upon cooling (second cycle) at 85 °C (a) and at 25 °C (b).
Materials 16 01946 g003
Materials 16 01946 g004 550
Figure 4. (a) CVs recorded in 0.1 M NaOH supporting the electrolyte within the potential range of −1.5 V/SCE to +1.0 V/SCE onto the Zn/Fe_CNT paste electrode (black line) and Zn_CNT paste electrode (red line); scan rate of 0.05 V∙s−1; inset: detail of CVs. (b) CVs recorded in 0.1 M NaOH supporting the electrolyte within the potential range of −1.5 V/SCE to +0.75 V/SCE onto Fc_CNT (black line) and Zn/Fe_CNT (red line) electrodes; scan rate of 0.05 V∙s−1.
Figure 4. (a) CVs recorded in 0.1 M NaOH supporting the electrolyte within the potential range of −1.5 V/SCE to +1.0 V/SCE onto the Zn/Fe_CNT paste electrode (black line) and Zn_CNT paste electrode (red line); scan rate of 0.05 V∙s−1; inset: detail of CVs. (b) CVs recorded in 0.1 M NaOH supporting the electrolyte within the potential range of −1.5 V/SCE to +0.75 V/SCE onto Fc_CNT (black line) and Zn/Fe_CNT (red line) electrodes; scan rate of 0.05 V∙s−1.
Materials 16 01946 g004
Materials 16 01946 g005 550
Figure 5. CVs recorded within potential window from −1.5 V to +1.0 V vs. SCE in 0.1 M NaOH supporting an electrolyte at various scan rates (0.01, 0.02, 0.03, 0.05, 0.1 and 0.2 Vꞏs−1 (curves 1–7)) on the electrodes: (a) Zn_CNT paste electrode; (b) Fc_CNT paste electrode; (c) Zn/Fe_CNT paste electrode.
Figure 5. CVs recorded within potential window from −1.5 V to +1.0 V vs. SCE in 0.1 M NaOH supporting an electrolyte at various scan rates (0.01, 0.02, 0.03, 0.05, 0.1 and 0.2 Vꞏs−1 (curves 1–7)) on the electrodes: (a) Zn_CNT paste electrode; (b) Fc_CNT paste electrode; (c) Zn/Fe_CNT paste electrode.
Materials 16 01946 g005
Table
Table 1. Indexation of the PXRD spectra of the mesophase upon cooling at 85 °C and at 25 °C.
Table 1. Indexation of the PXRD spectra of the mesophase upon cooling at 85 °C and at 25 °C.
T = 85 °C (Upon Cooling)T = 25 °C (Upon Cooling)
dobs (Å)hkdcalcd (Å) *Cell Parameterdobs (Å)hkdcalcd (Å) *Cell Parameter
26.81026.8 ** 26.31026.3 **
15.71115.5 15.41115.2
13.72013.4a = 30.95 Å13.52013.2a = 30.37 Å
9.2308.9 9.9219.9
7.6227.7 9.2308.9
3.4 6.9406.6
3.4
* Calculated data were obtained using LCDixRay [43]; ** data chosen for calculation.
Table
Table 2. CNT paste electrode surface coverage layers of Zn/Fe and Zn metallomesogens and ferrocene precursor (S4).
Table 2. CNT paste electrode surface coverage layers of Zn/Fe and Zn metallomesogens and ferrocene precursor (S4).
Modified ElectrodeΓ/mol∙cm−2
Zn(II) CentresFerrocene Centres
Zn_CNT2.20∙10−4-
Fc_CNT-1.80∙10−3
Zn/Fc_CNT6.66∙10−42.20∙10−4
Table
Table 3. Comparison of anodic and cathodic peaks and processes.
Table 3. Comparison of anodic and cathodic peaks and processes.
Electrode TypeAnodicCathodic
Process/PeakE/V vs. SCEProcess/PeakE/V vs. SCE
Zn/Fe_CNTZnO dissolution /AI+0.290Ferrocenium reduction/CI+0.240
Ferrocene oxidation/AII+0.600Oxygen reduction/CII−0.124
Zinc reduction/CIII−1.300
Zn_CNTZinc stripping/AI’−0.310Outer oxygen reduction reaction/CI’+0.135
ZnO dissolution /AII’+0.450Reduction of inner O2 /CII’−0.560
Zn reduction/CIII’−0.900
Fc_CNTFe oxidation /AI”−0.680Ferrocenium reduction/CI”+0.220
Ferrocene oxidation/AII”+0.260Fe(II) reduction /CII”−1.000
Ferrocenium oxidation/AIII”+0.550
Table
Table 4. Electrochemical data obtained for the Fc/Fc+ redox couple from CVs of the Fc_CNT paste electrode at different scan rates.
Table 4. Electrochemical data obtained for the Fc/Fc+ redox couple from CVs of the Fc_CNT paste electrode at different scan rates.
V1/2IpAII”IpCI”IpAII”/IpCI”EpAII”EpCI”ΔEp
0.10026.46−14.861.780.2400.2200.020
0.14171.46−48.781.470.2500.2100.040
0.173117.73−87.491.350.2600.2000.060
0.200162.74−129.881.250.2700.1900.080
0.224209.26−170.981.220.2800.1800.100
0.316405.98−345.141.180.3100.1600.150
0.447742.23−635.411.170.3600.1200.240
Table
Table 5. Electrochemical data obtained for the Fc/Fc+ redox couple from cyclic voltammograms of the Zn/Fe_CNT paste electrode at different scan rates.
Table 5. Electrochemical data obtained for the Fc/Fc+ redox couple from cyclic voltammograms of the Zn/Fe_CNT paste electrode at different scan rates.
V1/2IpAIIIpCIIpAII/IpCIEpAIIEpCIΔEp
0.1006.83−10.030.6800.6100.3000.310
0.14110.06−19.170.5200.6400.3000.340
0.17312.05−27.640.4400.6500.3000.350
0.20013.74−36.120.3800.6600.3000.360
0.22415.89−44.600.3600.6700.3000.370
0.31626.82−72.740.3700.6800.2800.400
0.44746.97−99.080.4700.6800.2300.450
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Popa, E.; Andelescu, A.A.; Ilies, S.; Visan, A.; Cretu, C.; Scarpelli, F.; Crispini, A.; Manea, F.; Szerb, E.I. Hetero-Bimetallic Ferrocene-Containing Zinc(II)-Terpyridyl-Based Metallomesogen: Structural and Electrochemical Characterization. Materials 2023, 16, 1946. https://doi.org/10.3390/ma16051946

AMA Style

Popa E, Andelescu AA, Ilies S, Visan A, Cretu C, Scarpelli F, Crispini A, Manea F, Szerb EI. Hetero-Bimetallic Ferrocene-Containing Zinc(II)-Terpyridyl-Based Metallomesogen: Structural and Electrochemical Characterization. Materials. 2023; 16(5):1946. https://doi.org/10.3390/ma16051946

Chicago/Turabian Style

Popa, Evelyn, Adelina A. Andelescu, Sorina Ilies (b. Motoc), Alexandru Visan, Carmen Cretu, Francesca Scarpelli, Alessandra Crispini, Florica Manea, and Elisabeta I. Szerb. 2023. "Hetero-Bimetallic Ferrocene-Containing Zinc(II)-Terpyridyl-Based Metallomesogen: Structural and Electrochemical Characterization" Materials 16, no. 5: 1946. https://doi.org/10.3390/ma16051946

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop