Next Article in Journal
Simulation Study on the Influence of Different Molten Steel Temperatures on Inclusion Distribution under Dual-Channel Induction-Heating Conditions
Previous Article in Journal
The Effect of Microballoon Volume Fraction on the Elastic and Viscoelastic Properties of Hollow Microballoon-Filled Epoxy Composites
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Zhang et al. Experimental and Numerical Studies on Hot Compressive Deformation Behavior of a Cu–Ni–Sn–Mn–Zn Alloy. Materials 2023, 16, 1445

1
State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China
2
School of Materials Science and Engineering, Central South University, Changsha 410083, China
3
Key Laboratory of Non-Ferrous Metal Materials Science and Engineering, Ministry of Education, Changsha 410083, China
4
Ningbo Boway Alloy Material Co., Ltd., Ningbo 315135, China
*
Authors to whom correspondence should be addressed.
Materials 2023, 16(24), 7555; https://doi.org/10.3390/ma16247555
Submission received: 17 April 2023 / Accepted: 11 July 2023 / Published: 8 December 2023
In the original publication [1], there was a mistake in Figure 5 as published. We found that we had accidentally duplicated plot a as plot c in the process of grouping the fitted curves. The corrected Figure 5 appears below. However, we believe that this does not significantly change the scope or message of the paper. The authors apologize for any inconvenience caused and state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Zhang, Y.; Xiao, Z.; Meng, X.; Xiao, L.; Pei, Y.; Gan, X. Experimental and Numerical Studies on Hot Compressive Deformation Behavior of a Cu–Ni–Sn–Mn–Zn Alloy. Materials 2023, 16, 1445. [Google Scholar] [CrossRef] [PubMed]
Figure 5. Relationship between peak stress and strain rate: (a)   ln ε ˙ ~ σ p curve; (b) ln ε ˙ ~ ln σ p curve; (c)   ln ε ˙ ~ ln [ sinh ( α σ p ) ] curve.
Figure 5. Relationship between peak stress and strain rate: (a)   ln ε ˙ ~ σ p curve; (b) ln ε ˙ ~ ln σ p curve; (c)   ln ε ˙ ~ ln [ sinh ( α σ p ) ] curve.
Materials 16 07555 g005
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Zhang, Y.; Xiao, Z.; Meng, X.; Xiao, L.; Pei, Y.; Gan, X. Correction: Zhang et al. Experimental and Numerical Studies on Hot Compressive Deformation Behavior of a Cu–Ni–Sn–Mn–Zn Alloy. Materials 2023, 16, 1445. Materials 2023, 16, 7555. https://doi.org/10.3390/ma16247555

AMA Style

Zhang Y, Xiao Z, Meng X, Xiao L, Pei Y, Gan X. Correction: Zhang et al. Experimental and Numerical Studies on Hot Compressive Deformation Behavior of a Cu–Ni–Sn–Mn–Zn Alloy. Materials 2023, 16, 1445. Materials. 2023; 16(24):7555. https://doi.org/10.3390/ma16247555

Chicago/Turabian Style

Zhang, Yufang, Zhu Xiao, Xiangpeng Meng, Lairong Xiao, Yongjun Pei, and Xueping Gan. 2023. "Correction: Zhang et al. Experimental and Numerical Studies on Hot Compressive Deformation Behavior of a Cu–Ni–Sn–Mn–Zn Alloy. Materials 2023, 16, 1445" Materials 16, no. 24: 7555. https://doi.org/10.3390/ma16247555

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop