Next Article in Journal
Synthesis, In Silico Prediction and In Vitro Evaluation of Antitumor Activities of Novel Pyrido[2,3-d]pyrimidine, Xanthine and Lumazine Derivatives
Next Article in Special Issue
Sample Preparation Methods for Lipidomics Approaches Used in Studies of Obesity
Previous Article in Journal
Essential Oil of Calotropis procera: Comparative Chemical Profiles, Antimicrobial Activity, and Allelopathic Potential on Weeds
Previous Article in Special Issue
Sponges and Sponge-Like Materials in Sample Preparation: A Journey from Past to Present and into the Future
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Review

Sample Preparation to Determine Pharmaceutical and Personal Care Products in an All-Water Matrix: Solid Phase Extraction

Food and Environmental Safety Research Group, Desertification Research Centre—CIDE (CSIC-UV-GV), University of Valencia (SAMA-UV), Moncada-Naquera Road, Km 4.5, 46113 Moncada, Spain
*
Authors to whom correspondence should be addressed.
Molecules 2020, 25(21), 5204; https://doi.org/10.3390/molecules25215204
Submission received: 12 October 2020 / Revised: 4 November 2020 / Accepted: 5 November 2020 / Published: 9 November 2020

Abstract

:
Pharmaceuticals and personal care products (PPCPs) are abundantly used by people, and some of them are excreted unaltered or as metabolites through urine, with the sewage being the most important source to their release to the environment. These compounds are in almost all types of water (wastewater, surface water, groundwater, etc.) at concentrations ranging from ng/L to µg/L. The isolation and concentration of the PPCPs from water achieves the appropriate sensitivity. This step is mostly based on solid-phase extraction (SPE) but also includes other approaches (dispersive liquid-liquid microextraction (DLLME), buckypaper, SPE using multicartridges, etc.). In this review article, we aim to discuss the procedures employed to extract PPCPs from any type of water sample prior to their determination via an instrumental analytical technique. Furthermore, we put forward not only the merits of the different methods available but also a number of inconsistencies, divergences, weaknesses and disadvantages of the procedures found in literature, as well as the systems proposed to overcome them and to improve the methodology. Environmental applications of the developed techniques are also discussed. The pressing need for new analytical innovations, emerging trends and future prospects was also considered.

1. Introduction

The production and consumption of pharmaceutical and personal care products (PPCPs) is considered an important environmental risk [1,2,3,4]. In the last decades, the occurrence of these compounds in nature increased, as described in a number of studies [5,6,7]. PPCPs can be detected as the active substance, with an unaltered chemical structure, or as a metabolite or a degradation product produced by human and environmental enzymatic activity [8], weather conditions, wastewater treatments [9] and by chemical-physical properties of matrices. There are many reasons for the increasing occurrence of these compounds in different environmental compartments, e.g., their intensive use in farms and aquaculture [10,11,12] or their inefficient removal from wastewater treatment plants [13,14]. The latter explains why PPCPs used and excreted at home or in hospital can ultimately be released into the environment. Another important source of contamination by PPCPs is industrial waste [15], which is not always processed in the correct form. Furthermore, treated wastewaters are reused for agriculture activity, especially in arid regions [16], contributing to the spread of PPCPs in more matrices, such as soil, wild animals, vegetation, and even food crops.
These considerations on the sources of PPCPs shows the key role that the analysis of water plays to fight against contamination. In fact, water—the most affected environmental compartment—may be considered as a mirror of the pollution status of an area, and also a scarce resource that must be preserved with optimal quality and zero pollution. In addition, water contaminants, depending on their physicochemical properties, may also (bio)accumulate in sediments and biota, consequently harming human health [17]. Therefore, it was considered a relevant vehicle to different environmental compartments.
Determining and quantifying PPCPs in different types of water provides considerable interesting information not only related to pollution status. For example, the analysis of wastewater samples, divided into influent and effluent waters, could offer information on the PPCPs consumption of a community, estimate the wastewater treatment plant efficiency and establish the most recalcitrant compounds difficult to eliminate. River, lake, and seawater samples could give us an idea of the more persistence substances. The detection in irrigation channels could identify food quality issues. In addition, drinking water is certainly another matrix that should be monitored to assess the potential risks on human and animal health for long-term use [18,19].
For an accurate analysis of PPCPs in different types of water, it is fundamental to consider all water characteristics that could influence recovery of the contaminants. The pH could affect the structure of molecule, promote ionization according to pKa, or activate a prodrug with a change of structure. Many substances were thermolabile and photosensitive, for this reason, sample temperature must always be considered. The salinity of water could increase or decrease extraction efficiency due to different ionic strengths of the media, or the formation of molecular complexes between PPCPs and multivalent metal cations present in the samples that are soluble in water [20]. Other water components have also a strong influence on the PPCPs recovery because are responsible for degradation and/or metabolism. A large range of different metabolites can be formed depending on the specific enzymatic activities, presence of fulvic and humic acids, microorganisms, etc. [21,22,23].
In addition to the matrix, it is also important to consider the structural variability of PPCPs, designed to interact with specific targets. The presence of distinct functional groups (such as esters, carboxylic acid, ketones, amides, etc.) or the existence of nucleophile/electrophile substituents contribute to all chemical-physical characteristics of each active substance. Influencing stability, reactivity, and solubility in water are all parameters that need to be considered before a sample’s preparation for analysis. Despite the variability in the PPCPs’ chemical structures, for most laboratories specialized in the analysis of these compounds, the use of multiresidue methods is very attractive because not only attains a reduction of cost and time, but also offers global patterns of contamination with only one analysis. Moreover, these methods easily facilitate an eco-friendly analysis with decreases in waste. In these multiresidue methods, the sample preparation becomes the heart of analysis that influences any other procedural steps from sample collection and storage to the specific instruments selected for final quantification (high performance liquid chromatography-mass spectrometry (HPLC-MS), gas chromatography-mass spectrometry (GC-MS), etc.). The choice of a liquid or gas chromatography (LC or GC), to analyze the final extract, is guided by the analytes’ polarity. Generally, compounds with polar characteristics are more suitable for LC, and those with non-polar properties are more amenable to GC; most PPCPs are polar or moderately polar [24]. Surprisingly, some contemporary review articles either cover broader aspects of environmental analysis [25,26,27], or focus on a particular type of extraction process (e.g., microextraction, use of nanomaterials, magnetic, ultrasonic, etc.) [28,29,30] but do not cover the entire sample preparation.
Therefore, the goal of this review was to critically analyze the status of sample preparation to determine PPCPs in an all-water matrix. Each step of sample preparation, including all analytical variants (conventional and innovative methods) used to detect these contaminants were considered. Furthermore, each sample preparation method was critically analyzed, highlighting advantages and disadvantages. This review performs an examination of all studies published from January 2018 to May 2020. The search was conducted on the database Scopus (Elsevier), with two different inputs: “extraction pharmaceutical environmental”/“extraction personal care products environmental” and “extraction pharmaceutical water”/“extraction personal care products water”. More than one thousand one hundred works have been viewed. The selection criteria to choose the studies were based on (i) the presence at least of 10 PPCPs to include attractive multiresidue methods; and (ii) water compartmentation, in all variants (wastewater, rivers, irrigation channels, lakes, drinking water, seas, urban storms, swimming pools and thermal water), was chosen. In addition, some reviews outside the interval of time were also chosen.

2. Extraction and Clean-Up of PPCPs in Water

PPCPs are organic compounds, and traditionally this type of compound has been extracted by solid-phase extraction (SPE). This technique was commercialized in the late 1970s and rapidly replaced the liquid-liquid extraction that was previously used [31]. Table 1 and Figure 1 show the analytical methods applied to extract PPCPs in water. The most common were still based on SPE in all possible variants (cartridge, disk, offline, online, etc.). The classic SPE process (cartridges offline) was used in 71.3% of the studies, the online version was employed in the determination in 9.2%, and disks were utilized instead of cartridges in 3.2%.
Only 16% of the studies use other types of methods, such as direct injection, dispersive liquid-liquid extraction (DLLME) (based on liquid-liquid extraction), polyether sulfone microextraction (PES) or buckypaper devices. It is important to note here that many of the methods classified as “other” are based on the basic principles of SPE, but using new phases or formats.

2.1. SPE

This technique involved the use of a small amount of sorbent (commonly hundreds of mg) in a cartridge or syringe barrel. After activation of the sorbent, a water sample of hundreds of mL was passed through the sorbent, which retained the analytes of interest (in this case PPCPs) whereas the water was discarded. Then, the analytes retained in the sorbent were eluted using a few mL of organic solvent. This technique has some advantages, such as the minor investment in reagent and materials, and rapidity.

2.1.1. Sorbents and Formats

There are different marketed sorbents that work principally with two distinct separation mechanisms: classical reversed phase chromatography (RP) or ion exchange chromatography (IC). Characteristics of these sorbents are summarized in Table 2. The sorbents used in RP are mostly of a polymeric nature and could be used for a large spectrum of PPCPs, including acidic, basic, and neutral compounds. RP sorbent was applied in 85% of SPE approaches (see Table 1). This is attributable to its ability to retain a wide range of different polarity compounds, a relevant characteristic for a multiresidue method that includes different chemical classes. Of these, two-thirds had a stationary phase characterized by polymeric sorbent that contained vinylpyrrolidone (Oasis® HLB, Strata®X and Cleanert® PEP). Another polymeric sorbent applied was marked by the presence of polystyrene-divinylbenzene (Isolute® ENV+, Chromabond® HR-X and Bond ElutTM ENV) that was applied to polar analytes, or the presence of octadecyl endcapped silica RP (Supelclean™ LC-18 SPE) that was used for nonpolar to moderately polar analytes from aqueous samples.
The IC sorbents were used in the so-called mixed-mode cartridges that combine the polymeric sorbent with an ionic exchanger that could be weak or strong. The IC can be of cations or anions, and this affects the target specificity. Cationic exchange sorbents (weak or strong) were designed to extract basic PPCPs, and anionic exchange sorbent (weak or strong) were to extract the acidic ones. However, weak polymeric cationic-exchangers (Oasis® MCX, Strata®X-CW or X-Drug B and UCT XTRACT® XRDAH) were the most prevalent.
Different studies applied attractive modifications to these traditional cartridges, to obtain the best recoveries for a large spectrum of compounds. Zhu et al. [52] developed, characterized and tested a hydrophilic resin based on poly(N-vinyl pyrrolidone-co-divinylbenzene) (NVP-co-DVB) that improved the average absolute recovery for 44 PPCPs, with respect to the use of HLB sorbents. Alternatively, Caban et al. [62] studied the modification of the columns through the application of additional sorbents on top of a polymeric HLB column to improve the SPE of 15 analytes (pharmaceuticals and estrogens) from water. PSAs (Primary and Secondary Amines) and alumina retained matrix components (e.g., humic and fulvic acids) without decreasing the analyte recovery. The solution was named triple-sorbents SPE. They were applied in order to reduce matrix effect. Similarly, Gago-Ferrero et al. [53] mixed four SPE materials simultaneously in an in-house cartridge. These materials included classical RP and ion mixed-mode sorbents (Oasis HLB, Isolute ENV+, Strata-X-AW and Strata-X-CV). Salas et al. [102] combined anionic and cationic exchange sorbents in the same cartridge to extract basic and acidic pharmaceuticals simultaneously. These minor improvements in the SPE procedure (without any relevant cost increment or enlargement of the procedure) can produce an important effect on the quantification of PPCPs, and increase the reliability and reproducibility of the results.
The format of the cartridge and the volume of samples that pass through the cartridge were other elements to take into consideration. The sorbent weight (mg), capacity (mL) and pore size (µm) can influence the efficiency of the columns. These parameters have a key role on the surface area, on which analytes interacted. The amount of sorbent ranged from 60 to 600 mg, and the most used was a quantity of 200 mg. The capacities most used were 3 and 6 mL. There is a global consensus on this point.
In SPE, the volume of water processed generally involves hundreds of milliliters. The capacity to detect lower amounts is one of the advantages of SPE. The matrix effect (ME) could be an element to take in consideration in the choice of volume because it is directly proportional to volume as well as the organic matter content of the water; in this case, clogging of the cartridge slows the process too much. For this reason, some studies chose different volumes of water (depending on its characteristics) with the same method. For example, influent wastewater samples were generally analyzed with smaller volumes compared to effluent samples [46,48].
Figure 2 compares the various volumes that were selected in the different studies. There are two ranges of volumes commonly chosen—between 200 and 250 mL (32% of the studies) and in interval ≥500 mL (42% of works). The volumes commonly used were 200, 250, 500 and 1000 mL. The latter is most commonly selected, but mainly for surface and drinking water.

2.1.2. SPE Activation, Washing and Elution

In SPE, the first step is the conditioning of the sorbent in order to favor the interaction of the sorbent with the analytes by a mechanism namely “solvation”. RF and IC sorbents are usually activated by filling the column two or three times with a solvent miscible with water (e.g., methanol, acetonitrile) followed by the solvent in which the analyte is dissolved (pure matrix, e.g., water, buffer). Methanol and water are most frequent solvents to activate cartridges. Water used for activation can be pH-adjusted or spiked with salt, counter ions or metal sequestrators (sodium acetate buffer [106], monopotassium phosphate [95], sodium dodecyl sulphate [57], etc.) to promote several types of interactions with compounds.
Once the sample passed through the sorbent, another important step is to remove the impurities retained on the SPE packing. For this reason, a wash solution strong enough to remove these impurities, but weak enough to leave the analytes of interest, is passed through the cartridge. These solutions are water, pH-adjusted water, or in a few cases methanol-water (5:95, v/v). The wash was followed by cartridges air-drying by vacuum or pressure to remove the remaining water, although in few cases, the cartridges can be dried with nitrogen instead of air [37,48,55,61,63].
The RP SPE is the mechanism more commonly used to extract contaminants from water samples, as described previously. The hydrophobic or non-polar interactions between sorbent functional groups and analytes must be destroyed with an organic solvent or solvent combination of enough non-polar character. The most used elution solvents are methanol and acetonitrile. The pH modification during elution can improve recovery if the analyte is ionizable and the eluent favors its ionic form, and basic and acidic compounds become more polar [107].
Figure 3 shows the eluents most frequently applied with HLB sorbents. Only methanol was used in more than half of methods, with acid or basic pH adjustment in 13%, and with a mix of other solvents or followed by a second elution with different solvent, for example, acetonitrile, dichloromethane and acetone, in 27%. Only 7% of the methods presented an eluent mixes (mostly acetonitrile and acetone) without methanol. In the case of weak cationic-exchange sorbents, the eluent was a basic solution with NH4OH in methanol or acetonitrile.
It is fundamental to consider not only the elution but also all steps that follow the elution. Once the PPCPs have been eluted, the extract is evaporated under a gentle stream of nitrogen in order to concentrate the analytes. The temperature used in this evaporation step is an important parameter that could affect the molecular stability of PPCPs. However, this temperature was not always reported in the studies, even though it can be responsible for the degradation of some PPCPs. The temperature range was between 25 and 50 °C, and the average was 39 °C.
The dried extracts are reconstituted with one or more solvents. If the compounds are determined by HPLC-MS, the mixture of solvents is usually comparable in composition to the initial mobile phase. Again, the reconstituting solvent more commonly used was the methanol-water mix. The most common volumes used for reconstitution were 0.5 and 1 mL. In the case of GC analysis, the addition of a derivatization reagent was often required because PPCPs are mostly polar and/or thermolabile, and these compounds are not amenable for GC analysis without increasing the stability of analytes.
Lastly, the final extract is filtrated before the analysis. Different syringe filters were reported, such as nylon, PVDF (polyvinylidene fluoride), PTFE, RC, GHP, PP, etc. The size used were 0.20 and 0.22 μm. This procedure was an ulterior clean-up to remove the particles with a large size to optimize analysis, for example by reducing the presence of obstruction phenomena in column. For this step, it was fundamental to remember which combinations (solvent-filter) are safe and which are corrosive.

2.1.3. Water Sample Pretreatment before SPE

Regarding the characteristics of the water sample, the preservation of its integrity from the sampling point to the moment of the analysis was vital. To this end, in many cases, the water samples were spiked by preservative compounds or solutions. As described in the U.S. Library of Medicine (2017), a pharmaceutical preservative is referred to as “substances added to pharmaceutical preparations to protect them from chemical change or microbial action” [108]. In the same way, these preservatives can be added to the water sample to avoid the degradation of the PPCPs present in the sample. Preservatives can be natural or synthetic compounds and included buffers, bulking agents, chelating agents, antioxidants, antimicrobial agents, surfactants, etc. ” [108,109]. The most used was EDTA—a chelating agent thanks to its four carboxyl groups and two nitrogen atoms that can form stable complexes with cations—which is able to improve the extraction efficiency of certain pharmaceuticals that also form complexes with metals, such as antibiotics, because they sequestrate the metals of the solution, liberating the PPCPs and increasing their recovery [110]. Generally, EDTA was added in the samples to a final concentration of 0.1% (1.000 g/L) or 0.05% (0.500 g/L), but it could reach a final concentration of 0.2, 2 or even 5%. Other preservatives used were antimicrobials, such as formaldehyde, NaCl, sodium azide and citric acid, and/or antioxidants, such as ascorbic acid and sodium thiosulfate. These antioxidants reduced any residual chlorine, chloramine and ozone that had been used as a disinfectant because they could react with some antibiotics [97]. Furthermore, more than half of the methods adjusted the pH of the sample to prevent degradation, ionization phenomena, or to achieve the optimum value for the extraction. For about 70% of methods, pH was adjusted between 2 and 3 units. In a few cases this adjustment was between 3.5 and 7. It was rarely adjusted by 9 and 10 units.
To ensure the proper quantification of the analytes is always very important. Therefore, samples were spiked by a solution of internal standard (IS) in more than 83% of the studies to obtain more reliable results, taking matrix effects into consideration. It was not always possible to use an isotopic reference for every compound, because the cost of the ISs are high, and are not available for some of the target analytes [57].
Another pretreatment widely used in water sample preparation was filtration, the role of which was to remove suspended substances, such as suspended particles, colloids and microorganisms from samples to prevent obstruction of the SPE cartridges or significant interferences in subsequent treatment processes [74]. In various studies, it was easy to find filters constituted of different materials, such as paper, nylon, PVDF (polyvinylidene fluoride) and cellulose membrane. The most frequently used to monitor the water pollution was a glass microfiber filter. The mesh filter range was from 0.20 to 1.60 μm; the size most commonly used was 0.45 μm. Sometimes filters with different sizes were coupled to remove particles at different levels. Centrifugation was an alternative to filtration, with the same goal but much less used [32]. In this case, the mass deposited on the bottom was removed and analysis was focused on supernatant.

2.2. Online SPE

SPE can be used offline (independently from the further chromatographic analysis) or online (directly connected to the chromatographic system). However, there are few difference in the components of the techniques between the two formats, with the exception of the valves system used to connect SPE online with the determination technique (commonly any type of HPLC-MS). In both, the main factors that affected the results of these technique were the formats and sorbents of stationary phase (cartridge) and the solvent(s) used for activation, washing and elution. Online SPE can be coupled to both, LC or GC. However, the preferred technique is online SPE liquid chromatography tandem mass spectrometry (SPE-LC-MS/MS), PPCPs and the SPE eluents are much more compatible with the mobile phase of LC than with that of GC.
To be functional, online systems require the use of 6 or 10 port valves to automate extraction and connection to the instrument. A schematic illustration of the analytical system is presented in Figure 4. The most common are home-made devices, but there are also commercial systems such as an automated sample processor [82]. These devices can be personalized and adapted to the particular analysis, for example, to obtain online cross, which allows the automatic cross-utilization of two SPE columns to speed up the analysis of pharmaceuticals in different water samples [40].
The columns for online-SPE mode were characterized by similar polymeric RP sorbents. The main differences, with offline-SPE, were the length of columns (generally 1–2 cm). OASIS HLB (2.1 × 30 mm, 10 μm) [40,50,78], MAYI-ODS (10 mm × 2.0 mm, 50 μm) [68], and PLRP columns [39,82] have been the most widely reported. However, sorbents based on alternative mechanisms, such as the so-called TurboFlow™, which mixes size exclusion chromatography with reversed sorbents, has also been reported to determine pharmaceuticals [46]. To this end, three TurboFlow™ columns (TFC) connected in series were used, i.e., Cyclone P–C18-P XL–Cyclone MAX in order to achieve a proper extraction and clean-up.
The online SPE systems present the advantage to provide automatic and efficient sample loading, clean-up, desorption, separation, and detection at the same time, to reduce the sample volume, save time and solvents, prevent sample contamination and PPCP loss, and improve the method performance. The reduction in sample volume that could decrease sensitivity is normally compensated for by the increase in sensitivity as all the analyte retained in the sorbent passes to the chromatographic column.
The disadvantage of these methods is that they are not very versatile to be adapted to different types and conditions of analysis, because sample pH, injection volume, and valve-switching time needs to be very carefully optimized to ensure appropriate method performance for target PPCPs [39]. Once established, they are more suitable for routine analysis.

2.3. SPE Disk

The disks are a variant of cartridges that follow the same principle to retain an elute PPCPs. The disks have a higher diameter (commonly ca. 45 mm) and low height (a few millimeters). This format attempts to address several disadvantages of the cartridges, such as plugging due to the suspended particulate matter, high back-pressure that reduces flow rates, and improve retention kinetics of the analytes by using lower particle size. Generally, it was used with higher volumes of samples than SPE. The passage of the sample was much quicker (up to 100 mL/min). Moreover, the use of disks was advantageous for handling dirty samples. Only four studies used this approach (Table 1). There are disposable disks of many types of sorbents: C18, hydrophilic divinylbenzene (DVB), HLB or carbon.
Hydrophilic divinylbenzene (DVB) disks have been compared with Oasis HLB cartridges. Although the most apolar analytes (LogP ≥ 4) attained higher process efficiencies following Speedisk extraction, it could be noticed that in general, process efficiency was lower than for Oasis HLB extraction: 16 versus 59 analytes having a process efficiency >60% for Speedisk and Oasis HLB, respectively [71]. However, this study did not compare the same type of sorbent in both formats. Kafeenah et al. [103] did compare both formats using HLB sorbent. The method using disk SPE was better in terms of recovery, sensitivity, rapidness, and matrix effect, compared to the cartridge method.
The combination of different disks in order to improve recoveries has also been tested for GC-MS amenable analytes using, in sequence, a glass microfiber disk (GMF 150, 47 mm, Whatman), a styrene-divinylbenzene disk (Empore™ SDB-XD, 47 mm), and an active carbon disk (Empore™ AC, 47 mm) [99]. However, the same study recommended the use PS-2 and AC-2 Sep-Pak short cartridges for compounds analyzed by HPLC-MS.
The main disadvantages, as evidenced in the studies, are related with highest waste of samples and reagents used to active, wash and elute the sorbent.

2.4. Other Extraction Approaches

Other approaches have been reported to extract the PPCPs from water, and even though they are not as used as SPE, can be advantageous for some applications. These approaches are commonly focused on more environmentally friendly alternatives that reduce the use of materials, organic solvents and reagents; the so-called green chemistry. The simplest process is direct injection without any pre-concentration steps [78,83]. This was possible thanks to the excellent sensitivity of the HPLC-MS/MS. Botero-Coy et al. [83] included a simple dilution with water (×5) in order to reduce the matrix complexity. The most important problem in this method is its high matrix effects.
The microextractions, both solid and liquid, are an attractive alternative to SPE. The Dispersive Liquid-liquid Microextraction (DLLME) [37,47] has benefits related to a quick, easy cleaning and highly efficient pre-concentration procedure. Moreover, the sample volume required was very small, reducing the wastes. Two solvents were used, a dispersant and an extractor. The dispersant must be soluble in water and in the extractor, and the choice was methanol. As extractor (few microliters) both, the most traditional, chloroform, and the most recently introduced ionic liquids (1-Hexyl-3-methylimidazolium hexafluorophosphate) have been reported. The most important problem of this technique to determine PPCPs is that it is more efficient for non-polar compounds. Other approaches applied were the solid phase microextraction (SPME), which is attractive, because it enables extraction and clean-up in only one step, eliminating the problems associated with extensive use of solvents and equipment, since the analytes retained in the fiber can be thermally desorbed in the GC injector [111]. Another advantage of this technique is that the adsorbed analyte can be derivatized on-fiber, to transform it into a more volatile compound in order to make it more GC-MS amenable. Recently, this on-fiber derivatization and on-line thermal desorption has been applied for the extraction of 17 mL of water sample for the simultaneous determination of 22 pharmaceuticals and personal care products, including three transformation products, in sewage [89]. The fiber used was 2-cm long, 50/30-µm thick Divinylbenzene/Carboxen/Polydimethylsiloxane (DVB/CAR/PDMS). This method has the advantage of avoiding the use of organic solvent, since analytes are directly desorbed in the GC injector. SPME fiber can also be desorbed with a few mL of organic solvent to analyze the PPCPs by HPLC-MS. As in the method reported by Mijangos et al. [49], preconcentrated pharmaceuticals and personal care products in a disposable and low cost polyethersulfone (PES) sorbent are further desorbed in methanol.
Other approaches are based on testing new phases consisted of nanomaterials as more efficient sorbents. Tomai et al. [93] performed an SPE with oxidized buckypaper (BP) for Stir-Disc. The aim was to propose an SPE extraction device which combined the properties of carbon nanotubes and magnetic stirring with the main advantages of disk SPE. The concept was the same as classic SPE, but in this case the extraction device was immersed into the aqueous sample and left under magnetic stirring to permit analyte absorption on a BP membrane.
The last approach was the use of a PASSIL sampler [79]. The acronym PASSIL describes a device constituted of two PES membranes impregnated with an ionic liquid. After passive sampling, the receiving phase was eluted from the membranes and dissolved with acetonitrile.

3. Environmental Applications

Seventy-six studies have been selected (Table 1). Nine studies proposed the application of two different methods or approaches for sample preparation. In many cases, the method was applied to various aqueous matrices. The average number of PPCPs detected for each method was forty-one. The average number of PPCPs included in the studies reviewed increased over time, which may be justified by the growing interest in using methods that include as many substances as possible in the same analysis. In the studies published in 2018, the average number of PPCPs included was 34; in 2019 the average was 38 and up to May 2020 it was 60. In the Figure 5, the different studies are classified according to the number of compounds detected. Forty-six percent of studies covered between 10 and 25 PPCPs. The second range (between 26 and 50) included 30% of studies. Fifteen percent showed a 50 < PPCPs < 100 range. Lastly, a small portion (9%) included more than 100 PPCPs. A few methods reported a contaminants list characterized by a multiclass of compounds, not only PPCPS, but pesticides, drugs, flame retardants, etc., too. For these cases, only the total number of PPCPs was considered.
Different types of water were collected. The principal parameters monitored were temperature, pH, EC (electrical conductivity, µS cm−1), TDS (total dissolved solids, µg L−1), DO (dissolved oxygen, mg L−1), TSS (total suspended solids, mg L−1) and BOD (biochemical oxygen demand, mg L−1). Influent and effluent wastewater samples from hospitals or wastewater treatment plants (WWTPs) were the most analyzed (46% of studies). This matrix was marked by complexity due to the presence of numerous interferents. Some studies investigated the presence of PPCPs in raw wastewater at the treatment plant, some just the effluents, and some investigated both [35]. Most of these studies also studied the efficiency of the elimination of the PPCPs in the WWTPs [35]. All these studies identified the WWTP effluents as one source of PPCPs to the environment.
In the second block of studies, different matrices were regrouped into a single group: surface water (SW). The 40% of works analyzed and studied in this group investigated a large spectrum of water sources: streams, rivers, estuaries, lakes, seas, ground water, and urban and agricultural storm waters. Drinking and tap water (DW) constituted the third group, with an occurrence of 12% in the studies selected. DW was regulated by “The Drinking Water Directive 98/83/EC” that supervises the quality of water (for human consumption). It provided a general framework and a minimum value of 48 specific parameters that must be monitored regularly [24].
Lastly, two works included other two aqueous matrices: thermal and swimming pool water (SP). Chemicals in these matrices can come from different sources, such as bathers, who continuously release organic matter mainly through sweat and urine [25].

4. Conclusions and Future Trends

The review article focused on the extraction methods for PPCPs. Although these extraction methods are clearly dominated by offline solid-phase extraction using cartridges, there are significant knowledge gaps in accurately understanding the extraction mechanisms for PPCPs, including some metabolite and/or degradation products. Many of the most recent and innovative methods are based on the combination of sorbents with different chemical-physical properties either in the same cartridge, in parallel, or even in series. These modifications are considered to be small steps, but nevertheless, they represent a great advance by improving the extraction of a group of compounds with very different polarities. Multiresidue methods able to cover more than 100 compounds are already a reality. Rapid, lower cost, and eco-friendly sample preparation techniques are urgently needed. Automated, online preconcentration, and clean-up steps prior to the instrument analysis would be the future of the technique. Solvent-free microextraction methods are the trend of extractions such as DLLME. However, these techniques are rarely used, as they work especially well with non-polar PPCPs, but most are polar.
Most of the environmental studies carried out so far have two aspects, (i) analytical including validation of the methods that mainly improves the accuracy in the quantification and the elimination of the matrix effects, and (ii) the environmental aspect in which the whole cycle of the water is covered, including the identification of the sources of these compounds to the environment, the efficiency in the elimination, and the influence of environmental factors such as seasonality. All these studies have contributed to an important advance of knowledge about the distribution and hazards of PPCPs. A gap detected in these studies is the lack of knowledge about the mixtures of PPCPs found in the environment and on the different metabolites and/or degradation products that can be present. It is expected that, in the near future, there will be an increase in knowledge in these fields.

Author Contributions

Conceptualization, D.S. and Y.P.; resources, D.S.; writing—original draft preparation, D.S.; writing—review and editing, Y.P.; funding acquisition, Y.P. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by the Spanish Ministry of Science, Innovation and Universities and the ERDF (European Regional Development Fund) through the project CICLIC—subproject WETANPACK (RTI2018-097158-B-C31) and by the Generalitat Valenciana through the project ANTROPOCEN@ (PROMETEO/2018/155) and D. Sadutto was funded by Generalitat Valenciana through a Santiago Grisolia grant: “GRISOLIAP/2018/102, Ref CPI-18-118.”

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Pereira, A.M.P.T.; Silva, L.J.G.; Lino, C.M.; Meisel, L.M.; Pena, A. A critical evaluation of different parameters for estimating pharmaceutical exposure seeking an improved environmental risk assessment. Sci. Total Environ. 2017, 603–604, 226–236. [Google Scholar] [CrossRef] [PubMed]
  2. Liu, J.; Dan, X.; Lu, G.; Shen, J.; Wu, D.; Yan, Z. Investigation of pharmaceutically active compounds in an urban receiving water: Occurrence, fate and environmental risk assessment. Ecotoxicol. Environ. Saf. 2018, 154, 214–220. [Google Scholar] [CrossRef]
  3. Parezanović, G.Š.; Lalic-Popovic, M.; Golocorbin-Kon, S.; Vasovic, V.; Milijašević, B.; Al-Salami, H.; Mikov, M. Environmental Transformation of Pharmaceutical Formulations: A Scientific Review. Arch. Environ. Contam. Toxicol. 2019, 77, 155–161. [Google Scholar] [CrossRef] [PubMed]
  4. Papageorgiou, M.; Kosma, C.; Lambropoulou, D. Seasonal occurrence, removal, mass loading and environmental risk assessment of 55 pharmaceuticals and personal care products in a municipal wastewater treatment plant in Central Greece. Sci. Total Environ. 2016, 543, 547–569. [Google Scholar] [CrossRef] [PubMed]
  5. Carmona, E.; Andreu, V.; Picó, Y. Multi-residue determination of 47 organic compounds in water, soil, sediment and fish—Turia River as case study. J. Pharm. Biomed. Anal. 2017, 146, 117–125. [Google Scholar] [CrossRef]
  6. aus der Beek, T.; Weber, F.-A.; Bergmann, A.; Hickmann, S.; Ebert, I.; Hein, A.; Küster, A. Pharmaceuticals in the environment—Global occurrences and perspectives. Environ. Toxicol. Chem. 2016, 35, 823–835. [Google Scholar] [CrossRef]
  7. Palma, P.; Fialho, S.; Lima, A.; Novais, M.H.; Costa, M.J.; Montemurro, N.; Pérez, S.; de Alda, M.L. Pharmaceuticals in a Mediterranean Basin: The influence of temporal and hydrological patterns in environmental risk assessment. Sci. Total Environ. 2020, 709, 136205. [Google Scholar] [CrossRef] [PubMed]
  8. Barra Caracciolo, A.; Patrolecco, L.; Grenni, P.; Di Lenola, M.; Ademollo, N.; Rauseo, J.; Rolando, L.; Spataro, F.; Plutzer, J.; Monostory, K.; et al. Chemical mixtures and autochthonous microbial community in an urbanized stretch of the River Danube. Microchem. J. 2019, 147, 985–994. [Google Scholar] [CrossRef]
  9. Zhang, L.; Carvalho, P.N.; Bollmann, U.E.; Ei-taliawy, H.; Brix, H.; Bester, K. Enhanced removal of pharmaceuticals in a biofilter: Effects of manipulating co-degradation by carbon feeding. Chemosphere 2019, 236, 124303. [Google Scholar] [CrossRef]
  10. Jeeva, M.P.; Usha, K.A.; Charuvila, T.A. Use of Antibiotics in Animals and Its Possible Impacts in the Environment. In Handbook of Research on Social Marketing and Its Influence on Animal Origin Food Product Consumption; Diana, B., Dora, M., Talia, R., Eds.; IGI Global: Hershey, PA, USA, 2018; pp. 77–91. [Google Scholar]
  11. Xiang, L.; Wu, X.-L.; Jiang, Y.-N.; Yan, Q.-Y.; Li, Y.-W.; Huang, X.-P.; Cai, Q.-Y.; Mo, C.-H. Occurrence and risk assessment of tetracycline antibiotics in soil from organic vegetable farms in a subtropical city, south China. Environ. Sci. Pollut. Res. 2016, 23, 13984–13995. [Google Scholar] [CrossRef]
  12. Du, X.; Bayliss, S.C.; Feil, E.J.; Liu, Y.; Wang, C.; Zhang, G.; Zhou, D.; Wei, D.; Tang, N.; Leclercq, S.O.; et al. Real time monitoring of Aeromonas salmonicida evolution in response to successive antibiotic therapies in a commercial fish farm. Environ. Microbiol. 2019, 21, 1113–1123. [Google Scholar] [CrossRef]
  13. Yang, Y.; Ok, Y.S.; Kim, K.-H.; Kwon, E.E.; Tsang, Y.F. Occurrences and removal of pharmaceuticals and personal care products (PPCPs) in drinking water and water/sewage treatment plants: A review. Sci. Total Environ. 2017, 596–597, 303–320. [Google Scholar] [CrossRef]
  14. Kumar, R.; Sarmah, A.K.; Padhye, L.P. Fate of pharmaceuticals and personal care products in a wastewater treatment plant with parallel secondary wastewater treatment train. J. Environ. Manag. 2019, 233, 649–659. [Google Scholar] [CrossRef] [PubMed]
  15. Li, W.C. Occurrence, sources, and fate of pharmaceuticals in aquatic environment and soil. Environ. Pollut. 2014, 187, 193–201. [Google Scholar] [CrossRef]
  16. Maryam, B.; Büyükgüngör, H. Wastewater reclamation and reuse trends in Turkey: Opportunities and challenges. J. Water Process. Eng. 2019, 30, 100501. [Google Scholar] [CrossRef]
  17. Salgueiro-González, N.; Muniategui-Lorenzo, S.; López-Mahía, P.; Prada-Rodríguez, D. Trends in analytical methodologies for the determination of alkylphenols and bisphenol A in water samples. Anal. Chim. Acta 2017, 962, 1–14. [Google Scholar] [CrossRef]
  18. Lin, T.; Yu, S.; Chen, W. Occurrence, removal and risk assessment of pharmaceutical and personal care products (PPCPs) in an advanced drinking water treatment plant (ADWTP) around Taihu Lake in China. Chemosphere 2016, 152, 1–9. [Google Scholar] [CrossRef] [PubMed]
  19. Praveena, S.M.; Mohd Rashid, M.Z.; Mohd Nasir, F.A.; Sze Yee, W.; Aris, A.Z. Occurrence and potential human health risk of pharmaceutical residues in drinking water from Putrajaya (Malaysia). Ecotoxicol. Environ. Saf. 2019, 180, 549–556. [Google Scholar] [CrossRef] [PubMed]
  20. Krakkó, D.; Licul-Kucera, V.; Záray, G.; Mihucz, V.G. Single-run ultra-high performance liquid chromatography for quantitative determination of ultra-traces of ten popular active pharmaceutical ingredients by quadrupole time-of-flight mass spectrometry after offline preconcentration by solid phase extraction from drinking and river waters as well as treated wastewater. Microchem. J. 2019, 148, 108–119. [Google Scholar]
  21. Fatta-Kassinos, D.; Vasquez, M.I.; Kümmerer, K. Transformation products of pharmaceuticals in surface waters and wastewater formed during photolysis and advanced oxidation processes—Degradation, elucidation of byproducts and assessment of their biological potency. Chemosphere 2011, 85, 693–709. [Google Scholar] [CrossRef]
  22. Boras, J.A.; Vaqué, D.; Maynou, F.; Sà, E.L.; Weinbauer, M.G.; Sala, M.M. Factors shaping bacterial phylogenetic and functional diversity in coastal waters of the NW Mediterranean Sea. Estuar. Coast. Shelf Sci. 2015, 154, 102–110. [Google Scholar] [CrossRef]
  23. Matilainen, A.; Sillanpää, M. Removal of natural organic matter from drinking water by advanced oxidation processes. Chemosphere 2010, 80, 351–365. [Google Scholar] [CrossRef]
  24. Rushing, B.; Wooten, A.; Shawky, M.; Selim, M.I. Comparison of LC-MS and GC-MS for the Analysis of Pharmaceuticals and Personal Care Products in Surface Water and Treated Wastewaters. Spectroscopy 2016, 14, 8–14. [Google Scholar]
  25. Kachhawaha, A.S.; Nagarnaik, P.M.; Labhasetwar, P.; Banerjee, K. A Review of Recently Developed LC-MS/MS Methods for the Analysis of Pharmaceuticals and Personal Care Products in Water. J. Aoac Int. 2020, 103, 9–22. [Google Scholar] [CrossRef]
  26. Knoll, S.; Rosch, T.; Huhn, C. Trends in sample preparation and separation methods for the analysis of very polar and ionic compounds in environmental water and biota samples. Anal. Bioanal. Chem. 2020, 412, 6149–6165. [Google Scholar] [CrossRef]
  27. Matich, E.K.; Soria, N.G.C.; Aga, D.S.; Atilla-Gokcumen, G.E. Applications of metabolomics in assessing ecological effects of emerging contaminants and pollutants on plants. J. Hazard. Mater. 2019, 373, 527–535. [Google Scholar] [CrossRef]
  28. Sereshti, H.; Duman, O.; Tunc, S.; Nouri, N.; Khorram, P. Nanosorbent-based solid phase microextraction techniques for the monitoring of emerging organic contaminants in water and wastewater samples. Microchim. Acta 2020, 187, 1–35. [Google Scholar] [CrossRef] [PubMed]
  29. Büyüktiryaki, S.; Keçili, R.; Hussain, C.M. Functionalized nanomaterials in dispersive solid phase extraction: Advances & prospects. TrAC Trends Anal. Chem. 2020, 127, 115893. [Google Scholar]
  30. Wei, X.; Wang, Y.; Chen, J.; Xu, F.; Liu, Z.; He, X.; Li, H.; Zhou, Y. Adsorption of pharmaceuticals and personal care products by deep eutectic solvents-regulated magnetic metal-organic framework adsorbents: Performance and mechanism. Chem. Eng. J. 2020, 392, 124808. [Google Scholar] [CrossRef]
  31. Font, G.; Mañes, J.; Moltó, J.C.; Picó, Y. Solid-phase extraction in multi-residue pesticide analysis of water. J. Chromatogr. A 1993, 642, 135–161. [Google Scholar] [CrossRef]
  32. Zhang, Y.; Duan, L.; Wang, B.; Liu, C.S.; Jia, Y.; Zhai, N.; Blaney, L.; Yu, G. Efficient multiresidue determination method for 168 pharmaceuticals and metabolites: Optimization and application to raw wastewater, wastewater effluent, and surface water in Beijing, China. Environ. Pollut. 2020, 261, 114113. [Google Scholar] [CrossRef]
  33. Hong, B.; Yu, S.; Niu, Y.; Ding, J.; Lin, Q.; Lin, X.; Hu, W. Spectrum and environmental risks of residual pharmaceuticals in stream water with emphasis on its relation to epidemic infectious disease and anthropogenic activity in watershed. J. Hazard. Mater. 2020, 385, 121594. [Google Scholar] [CrossRef]
  34. Fan, X.; Gao, J.; Li, W.; Huang, J.; Yu, G. Determination of 27 pharmaceuticals and personal care products (PPCPs) in water: The benefit of isotope dilution. Front. Environ. Sci. Eng. 2020, 14, 8. [Google Scholar] [CrossRef]
  35. Papageorgiou, M.; Zioris, I.; Danis, T.; Bikiaris, D.; Lambropoulou, D. Comprehensive investigation of a wide range of pharmaceuticals and personal care products in urban and hospital wastewaters in Greece. Sci. Total Environ. 2019, 694, 133565. [Google Scholar] [CrossRef]
  36. Guzel, E.Y.; Cevik, F.; Daglioglu, N. Determination of pharmaceutical active compounds in Ceyhan River, Turkey: Seasonal, spatial variations and environmental risk assessment. Hum. Ecol. Risk Assess. Int. J. 2019, 25, 1980–1995. [Google Scholar] [CrossRef]
  37. Koçoğlu, E.S.; Sözüdoğru, O.; Komesli, O.T.; Yılmaz, A.E.; Bakırdere, S. Simultaneous determination of drug active compound, hormones, pesticides, and endocrine disruptor compounds in wastewater samples by GC-MS with direct calibration and matrix matching strategies after preconcentration with dispersive liquid-liquid microextraction. Environ. Monit. Assess. 2019, 191, 653. [Google Scholar]
  38. Gumbi, B.P.; Moodley, B.; Birungi, G.; Ndungu, P.G. Target, Suspect and Non-Target Screening of Silylated Derivatives of Polar Compounds Based on Single Ion Monitoring GC-MS. Int. J. Environ. Res. Public Health 2019, 16, 4022. [Google Scholar] [CrossRef] [Green Version]
  39. Zhong, M.; Wang, T.; Qi, C.; Peng, G.; Lu, M.; Huang, J.; Blaney, L.; Yu, G. Automated online solid-phase extraction liquid chromatography tandem mass spectrometry investigation for simultaneous quantification of per-and polyfluoroalkyl substances, pharmaceuticals and personal care products, and organophosphorus flame retardants in environmental waters. J. Chromatogr. A 2019, 1602, 350–358. [Google Scholar]
  40. Liang, Y.; Liu, J.; Zhong, Q.; Yu, D.; Yao, J.; Huang, T.; Zhu, M.; Zhou, T. A fully automatic cross used solid-phase extraction online coupled with ultra-high performance liquid chromatography–tandem mass spectrometry system for the trace analysis of multi-class pharmaceuticals in water samples. J. Pharm. Biomed. Anal. 2019, 174, 330–339. [Google Scholar] [CrossRef]
  41. Miossec, C.; Lanceleur, L.; Monperrus, M. Multi-residue analysis of 44 pharmaceutical compounds in environmental water samples by solid-phase extraction coupled to liquid chromatography-tandem mass spectrometry. J. Sep. Sci. 2019, 42, 1853–1866. [Google Scholar] [CrossRef]
  42. Vreys, N.; Amé, M.; Filippi, I.; Cazenave, J.; Valdés, M.; Bistoni, M. Effect of Landscape Changes on Water Quality and Health Status of Heptapterus mustelinus (Siluriformes, Heptapteridae). Arch. Environ. Contam. Toxicol. 2019, 76, 453–468. [Google Scholar] [CrossRef] [PubMed]
  43. Xie, H.; Hao, H.; Xu, N.; Liang, X.; Gao, D.; Xu, Y.; Gao, Y.; Tao, H.; Wong, M. Pharmaceuticals and personal care products in water, sediments, aquatic organisms, and fish feeds in the Pearl River Delta: Occurrence, distribution, potential sources, and health risk assessment. Sci. Total Environ. 2019, 659, 230–239. [Google Scholar] [CrossRef]
  44. Abdallah, M.A.-E.; Nguyen, K.-H.; Ebele, A.J.; Atia, N.N.; Ali, H.R.H.; Harrad, S. A single run, rapid polarity switching method for determination of 30 pharmaceuticals and personal care products in waste water using Q-Exactive Orbitrap high resolution accurate mass spectrometry. J. Chromatogr. A 2019, 1588, 68–76. [Google Scholar] [CrossRef]
  45. Fatoki, O.S.; Opeolu, B.O.; Genthe, B.; Olatunji, O.S. Multi-residue method for the determination of selected veterinary pharmaceutical residues in surface water around Livestock Agricultural farms. Heliyon 2018, 4, e01066. [Google Scholar] [CrossRef] [Green Version]
  46. Pérez-Alvarez, I.; Islas-Flores, H.; Gómez-Oliván, L.M.; Barceló, D.; De Alda, M.L.; Solsona, S.P.; Sánchez-Aceves, L.; SanJuan-Reyes, N.; Galar-Martínez, M. Determination of metals and pharmaceutical compounds released in hospital wastewater from Toluca, Mexico, and evaluation of their toxic impact. Environ. Pollut. 2018, 240, 330–341. [Google Scholar] [CrossRef]
  47. Marube, L.C.; Caldas, S.S.; Santos, E.O.D.; Michaelsen, A.; Primel, E.G. Multi-residue method for determination of thirty-five pesticides, pharmaceuticals and personal care products in water using ionic liquid-dispersive liquid-liquid microextraction combined with liquid chromatography-tandem mass spectrometry. J. Braz. Chem. Soc. 2018, 29, 1349–1359. [Google Scholar] [CrossRef]
  48. Krizman-Matasic, I.; Kostanjevecki, P.; Ahel, M.; Terzic, S. Simultaneous analysis of opioid analgesics and their metabolites in municipal wastewaters and river water by liquid chromatography-tandem mass spectrometry. J. Chromatogr. A 2018, 1533, 102–111. [Google Scholar] [CrossRef] [Green Version]
  49. Mijangos, L.; Ziarrusta, H.; Olivares, M.; Zuloaga, O.; Möder, M.; Etxebarria, N.; Prieto, A. Simultaneous determination of 41 multiclass organic pollutants in environmental waters by means of polyethersulfone microextraction followed by liquid chromatography–tandem mass spectrometry. Anal. Bioanal. Chem. 2018, 410, 615–632. [Google Scholar] [CrossRef]
  50. Pivetta, R.C.; Rodrigues-Silva, C.; Ribeiro, A.R.; Rath, S. Tracking the occurrence of psychotropic pharmaceuticals in Brazilian wastewater treatment plants and surface water, with assessment of environmental risks. Sci. Total Environ. 2020, 727, 138661. [Google Scholar] [CrossRef] [PubMed]
  51. Gopal, C.M.; Bhat, K.; Praveenkumarreddy, Y.; Shailesh; Kumar, V.; Basu, H.; Joshua, D.I.; Singhal, R.K.; Balakrishna, K. Evaluation of selected pharmaceuticals and personal care products in water matrix using ion trap mass spectrometry: A simple weighted calibration curve approach. J. Pharm. Biomed. Anal. 2020, 185, 113214. [Google Scholar] [CrossRef]
  52. Zhu, F.; Yao, Z.; Ji, W.; Liu, D.; Zhang, H.; Li, A.; Huo, Z.; Zhou, Q. An efficient resin for solid-phase extraction and determination by UPLCMS/MS of 44 pharmaceutical personal care products in environmental waters. Front. Environ. Sci. Eng. 2020, 14, 51. [Google Scholar] [CrossRef]
  53. Gago-Ferrero, P.; Bletsou, A.A.; Damalas, D.E.; Aalizadeh, R.; Alygizakis, N.A.; Singer, H.P.; Hollender, J.; Thomaidis, N.S. Wide-scope target screening of >2000 emerging contaminants in wastewater samples with UPLC-Q-ToF-HRMS/MS and smart evaluation of its performance through the validation of 195 selected representative analytes. J. Hazard. Mater. 2020, 387, 121712. [Google Scholar] [CrossRef]
  54. Castillo Meza, L.; Piotrowski, P.; Farnan, J.; Tasker, T.L.; Xiong, B.; Weggler, B.; Murrell, K.; Dorman, F.L.; Vanden Heuvel, J.P.; Burgos, W.D. Detection and removal of biologically active organic micropollutants from hospital wastewater. Sci. Total Environ. 2020, 700, 134469. [Google Scholar] [CrossRef] [PubMed]
  55. Nantaba, F.; Wasswa, J.; Kylin, H.; Palm, W.-U.; Bouwman, H.; Kümmerer, K. Occurrence, distribution, and ecotoxicological risk assessment of selected pharmaceutical compounds in water from Lake Victoria, Uganda. Chemosphere 2020, 239, 124642. [Google Scholar] [CrossRef]
  56. Fernandes, M.J.; Paíga, P.; Silva, A.; Llaguno, C.P.; Carvalho, M.; Vázquez, F.M.; Delerue-Matos, C. Antibiotics and antidepressants occurrence in surface waters and sediments collected in the north of Portugal. Chemosphere 2020, 239, 124729. [Google Scholar] [CrossRef]
  57. Sadutto, D.; Álvarez-Ruiz, R.; Picó, Y. Systematic assessment of extraction of pharmaceuticals and personal care products in water and sediment followed by liquid chromatography–tandem mass spectrometry. Anal. Bioanal. Chem. 2020, 412, 113–127. [Google Scholar] [CrossRef] [PubMed]
  58. Jakab, G.; Szalai, Z.; Michalkó, G.; Ringer, M.; Filep, T.; Szabó, L.; Maász, G.; Pirger, Z.; Ferincz, Á.; Staszny, Á.; et al. Thermal baths as sources of pharmaceutical and illicit drug contamination. Environ. Sci. Pollut. Res. 2020, 27, 399–410. [Google Scholar] [CrossRef] [Green Version]
  59. Afsa, S.; Hamden, K.; Lara Martin, P.A.; Mansour, H.B. Occurrence of 40 pharmaceutically active compounds in hospital and urban wastewaters and their contribution to Mahdia coastal seawater contamination. Environ. Sci. Pollut. Res. 2020, 27, 1941–1955. [Google Scholar] [CrossRef] [PubMed]
  60. Guedes-Alonso, R.; Montesdeoca-Esponda, S.; Pacheco-Juárez, J.; Sosa-Ferrera, Z.; Santana-Rodríguez, J. A Survey of the Presence of Pharmaceutical Residues in Wastewaters. Evaluation of Their Removal using Conventional and Natural Treatment Procedures. Molecules 2020, 25, 1639. [Google Scholar] [CrossRef] [Green Version]
  61. Hou, F.; Tian, Z.; Peter, K.T.; Wu, C.; Gipe, A.D.; Zhao, H.; Alegria, E.A.; Liu, F.; Kolodziej, E.P. Quantification of organic contaminants in urban stormwater by isotope dilution and liquid chromatography-tandem mass spectrometry. Anal. Bioanal. Chem. 2019, 411, 7791–7806. [Google Scholar] [CrossRef]
  62. Caban, M.; Lis, H.; Kobylis, P.; Stepnowski, P. The triple-sorbents solid-phase extraction for pharmaceuticals and estrogens determination in wastewater samples. Microchem. J. 2019, 149, 103965. [Google Scholar] [CrossRef]
  63. Maasz, G.; Mayer, M.; Zrinyi, Z.; Molnar, E.; Kuzma, M.; Fodor, I.; Pirger, Z.; Takács, P. Spatiotemporal variations of pharmacologically active compounds in surface waters of a summer holiday destination. Sci. Total Environ. 2019, 677, 545–555. [Google Scholar] [CrossRef] [Green Version]
  64. Tran, N.H.; Reinhard, M.; Khan, E.; Chen, H.; Nguyen, V.T.; Li, Y.; Goh, S.G.; Nguyen, Q.B.; Saeidi, N.; Gin, K.Y.-H. Emerging contaminants in wastewater, stormwater runoff, and surface water: Application as chemical markers for diffuse sources. Sci. Total Environ. 2019, 676, 252–267. [Google Scholar] [CrossRef]
  65. Xu, M.; Huang, H.; Li, N.; Li, F.; Wang, D.; Luo, Q. Occurrence and ecological risk of pharmaceuticals and personal care products (PPCPs) and pesticides in typical surface watersheds, China. Ecotoxicol. Environ. Saf. 2019, 175, 289–298. [Google Scholar] [CrossRef]
  66. Reis, E.O.; Foureaux, A.F.S.; Rodrigues, J.S.; Moreira, V.R.; Lebron, Y.A.R.; Santos, L.V.S.; Amaral, M.C.S.; Lange, L.C. Occurrence, removal and seasonal variation of pharmaceuticals in Brasilian drinking water treatment plants. Environ. Pollut. 2019, 250, 773–781. [Google Scholar] [CrossRef]
  67. Coelho, M.M.; Lado Ribeiro, A.R.; Sousa, J.C.G.; Ribeiro, C.; Fernandes, C.; Silva, A.M.T.; Tiritan, M.E. Dual enantioselective LC–MS/MS method to analyse chiral drugs in surface water: Monitoring in Douro River estuary. J. Pharm. Biomed. Anal. 2019, 170, 89–101. [Google Scholar] [CrossRef]
  68. Hong, Y.; Lee, I.; Lee, W.; Kim, H. Mass-balance-model-based evaluation of sewage treatment plant contribution to residual pharmaceuticals in environmental waters. Chemosphere 2019, 225, 378–387. [Google Scholar] [CrossRef] [PubMed]
  69. de Oliveira, J.A.; Izeppi, L.J.P.; Loose, R.F.; Muenchen, D.K.; Prestes, O.D.; Zanella, R. A multiclass method for the determination of pharmaceuticals in drinking water by solid phase extraction and ultra-high performance liquid chromatography-tandem mass spectrometry. Anal. Methods 2019, 11, 2333–2340. [Google Scholar] [CrossRef]
  70. Peng, Y.; Gautam, L.; Hall, S.W. The detection of drugs of abuse and pharmaceuticals in drinking water using solid-phase extraction and liquid chromatography-mass spectrometry. Chemosphere 2019, 223, 438–447. [Google Scholar] [CrossRef] [Green Version]
  71. Vanryckeghem, F.; Huysman, S.; Van Langenhove, H.; Vanhaecke, L.; Demeestere, K. Multi-residue quantification and screening of emerging organic micropollutants in the Belgian Part of the North Sea by use of Speedisk extraction and Q-Orbitrap HRMS. Mar. Pollut. Bull. 2019, 142, 350–360. [Google Scholar] [CrossRef]
  72. Singh, R.R.; Angeles, L.F.; Butryn, D.M.; Metch, J.W.; Garner, E.; Vikesland, P.J.; Aga, D.S. Towards a harmonized method for the global reconnaissance of multi-class antimicrobials and other pharmaceuticals in wastewater and receiving surface waters. Environ. Int. 2019, 124, 361–369. [Google Scholar] [CrossRef]
  73. Semreen, M.H.; Shanableh, A.; Semerjian, L.; Alniss, H.; Mousa, M.; Bai, X.; Acharya, K. Simultaneous determination of pharmaceuticals by solid-phase extraction and liquid chromatography-tandem mass spectrometry: A case study from sharjah sewage treatment plant. Molecules 2019, 24, 633. [Google Scholar] [CrossRef] [Green Version]
  74. Chen, L.; Lin, H.; Li, H.; Wang, M.; Qiu, B.; Yang, Z. Influence of filtration during sample pretreatment on the detection of antibiotics and non-steroidal anti-inflammatory drugs in natural surface waters. Sci. Total Environ. 2019, 650, 769–778. [Google Scholar] [CrossRef] [PubMed]
  75. Česen, M.; Ahel, M.; Terzić, S.; Heath, D.J.; Heath, E. The occurrence of contaminants of emerging concern in Slovenian and Croatian wastewaters and receiving Sava river. Sci. Total Environ. 2019, 650, 2446–2453. [Google Scholar] [CrossRef]
  76. Paíga, P.; Correia, M.; Fernandes, M.J.; Silva, A.; Carvalho, M.; Vieira, J.; Jorge, S.; Silva, J.G.; Freire, C.; Delerue-Matos, C. Assessment of 83 pharmaceuticals in WWTP influent and effluent samples by UHPLC-MS/MS: Hourly variation. Sci. Total Environ. 2019, 648, 582–600. [Google Scholar] [CrossRef]
  77. Lv, J.; Zhang, L.; Chen, Y.; Ye, B.; Han, J.; Jin, N. Occurrence and distribution of pharmaceuticals in raw, finished, and drinking water from seven large river basins in China. J. Water Health 2019, 17, 477–489. [Google Scholar] [CrossRef]
  78. Chauveheid, E.; Scholdis, S. Removal of pharmaceuticals by a surface water treatment plant. Water Supply 2019, 19, 1793–1801. [Google Scholar] [CrossRef]
  79. Męczykowska, H.; Stepnowski, P.; Caban, M. Impact of humic acids, temperature and stirring on passive extraction of pharmaceuticals from water by trihexyl(tetradecyl)phosphonium dicyanamide. Microchem. J. 2019, 144, 500–505. [Google Scholar] [CrossRef]
  80. Pemberton, J.A.; Lloyd, C.E.M.; Arthur, C.J.; Johnes, P.J.; Dickinson, M.; Charlton, A.J.; Evershed, R.P. Untargeted characterisation of dissolved organic matter contributions to rivers from anthropogenic point sources using direct-infusion and high-performance liquid chromatography/Orbitrap mass spectrometry. Rapid Commun. Mass Spectrom. 2019, 34, e8618. [Google Scholar] [CrossRef] [Green Version]
  81. Arsand, J.B.; Hoff, R.B.; Jank, L.; Dallegrave, A.; Galeazzi, C.; Barreto, F.; Pizzolato, T.M. Wide-Scope Determination of Pharmaceuticals and Pesticides in Water Samples: Qualitative and Confirmatory Screening Method Using LC-qTOF-MS. Water Air Soil Pollut. 2018, 229, 399. [Google Scholar] [CrossRef]
  82. López-García, E.; Mastroianni, N.; Postigo, C.; Barceló, D.; López de Alda, M. A fully automated approach for the analysis of 37 psychoactive substances in raw wastewater based on on-line solid phase extraction-liquid chromatography-tandem mass spectrometry. J. Chromatogr. A 2018, 1576, 80–89. [Google Scholar] [CrossRef]
  83. Botero-Coy, A.M.; Martínez-Pachón, D.; Boix, C.; Rincón, R.J.; Castillo, N.; Arias-Marín, L.P.; Manrique-Losada, L.; Torres-Palma, R.; Moncayo-Lasso, A.; Hernández, F. An investigation into the occurrence and removal of pharmaceuticals in Colombian wastewater. Sci. Total Environ. 2018, 642, 842–853. [Google Scholar] [CrossRef]
  84. Li, W.-L.; Zhang, Z.-F.; Ma, W.-L.; Liu, L.-Y.; Song, W.-W.; Li, Y.-F. An evaluation on the intra-day dynamics, seasonal variations and removal of selected pharmaceuticals and personal care products from urban wastewater treatment plants. Sci. Total Environ. 2018, 640–641, 1139–1147. [Google Scholar] [CrossRef]
  85. Česen, M.; Heath, D.; Krivec, M.; Košmrlj, J.; Kosjek, T.; Heath, E. Seasonal and spatial variations in the occurrence, mass loadings and removal of compounds of emerging concern in the Slovene aqueous environment and environmental risk assessment. Environ. Pollut. 2018, 242, 143–154. [Google Scholar] [CrossRef] [PubMed]
  86. González-Mariño, I.; Castro, V.; Montes, R.; Rodil, R.; Lores, A.; Cela, R.; Quintana, J.B. Multi-residue determination of psychoactive pharmaceuticals, illicit drugs and related metabolites in wastewater by ultra-high performance liquid chromatography-tandem mass spectrometry. J. Chromatogr. A 2018, 1569, 91–100. [Google Scholar] [CrossRef]
  87. Asghar, M.A.; Zhu, Q.; Sun, S.; Peng, Y.E.; Shuai, Q. Suspect screening and target quantification of human pharmaceutical residues in the surface water of Wuhan, China, using UHPLC-Q-Orbitrap HRMS. Sci. Total Environ. 2018, 635, 828–837. [Google Scholar] [CrossRef]
  88. Fantuzzi, G.; Aggazzotti, G.; Righi, E.; Predieri, G.; Castiglioni, S.; Riva, F.; Zuccato, E. Illicit drugs and pharmaceuticals in swimming pool waters. Sci. Total Environ. 2018, 635, 956–963. [Google Scholar] [CrossRef] [PubMed]
  89. López-Serna, R.; Marín-de-Jesús, D.; Irusta-Mata, R.; García-Encina, P.A.; Lebrero, R.; Fdez-Polanco, M.; Muñoz, R. Multiresidue analytical method for pharmaceuticals and personal care products in sewage and sewage sludge by online direct immersion SPME on-fiber derivatization—GCMS. Talanta 2018, 186, 506–512. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  90. Al-Qaim, F.F.; Mussa, Z.H.; Yuzir, A. Development and validation of a comprehensive solid-phase extraction method followed by LC-TOF/MS for the analysis of eighteen pharmaceuticals in influent and effluent of sewage treatment plants. Anal. Bioanal. Chem. 2018, 410, 4829–4846. [Google Scholar] [CrossRef]
  91. Diuzheva, A.; Balogh, J.; Jekő, J.; Cziáky, Z. Application of liquid-liquid microextraction for the effective separation and simultaneous determination of 11 pharmaceuticals in wastewater samples using high-performance liquid chromatography with tandem mass spectrometry. J. Sep. Sci. 2018, 41, 2870–2877. [Google Scholar] [CrossRef]
  92. Tröger, R.; Klöckner, P.; Ahrens, L.; Wiberg, K. Micropollutants in drinking water from source to tap—Method development and application of a multiresidue screening method. Sci. Total Environ. 2018, 627, 1404–1432. [Google Scholar] [CrossRef]
  93. Tomai, P.; Martinelli, A.; Morosetti, S.; Curini, R.; Fanali, S.; Gentili, A. Oxidized Buckypaper for Stir-Disc Solid Phase Extraction: Evaluation of Several Classes of Environmental Pollutants Recovered from Surface Water Samples. Anal. Chem. 2018, 90, 6827–6834. [Google Scholar] [CrossRef]
  94. Klančar, A.; Trontelj, J.; Roškar, R. Development of a Multi-Residue Method for Monitoring 44 Pharmaceuticals in Slovene Surface Water by SPE-LC-MS/MS. Water Air Soil Pollut. 2018, 229, 192. [Google Scholar] [CrossRef]
  95. Yao, B.; Yan, S.; Lian, L.; Yang, X.; Wan, C.; Dong, H.; Song, W. Occurrence and indicators of pharmaceuticals in Chinese streams: A nationwide study. Environ. Pollut. 2018, 236, 889–898. [Google Scholar] [CrossRef] [PubMed]
  96. Wiest, L.; Chonova, T.; Bergé, A.; Baudot, R.; Bessueille-Barbier, F.; Ayouni-Derouiche, L.; Vulliet, E. Two-year survey of specific hospital wastewater treatment and its impact on pharmaceutical discharges. Environ. Sci. Pollut. Res. 2018, 25, 9207–9218. [Google Scholar] [CrossRef]
  97. Monteiro, M.A.; Spisso, B.F.; Ferreira, R.G.; Pereira, M.U.; Grutes, J.V.; de Andradec, B.R.; d’Avila, L.A. Development and validation of liquid chromatography-tandem mass spectrometry methods for determination of beta-lactams, macrolides, fluoroquinolones, sulfonamides and tetracyclines in surface and drinking water from Rio de Janeiro, Brazil. J. Braz. Chem. Soc. 2017, 29, 801–813. [Google Scholar] [CrossRef]
  98. Castiglioni, S.; Davoli, E.; Riva, F.; Palmiotto, M.; Camporini, P.; Manenti, A.; Zuccato, E. Mass balance of emerging contaminants in the water cycle of a highly urbanized and industrialized area of Italy. Water Res. 2018, 131, 287–298. [Google Scholar] [CrossRef]
  99. Chau, H.T.C.; Kadokami, K.; Duong, H.T.; Kong, L.; Nguyen, T.T.; Nguyen, T.Q.; Ito, Y. Occurrence of 1153 organic micropollutants in the aquatic environment of Vietnam. Environ. Sci. Pollut. Res. 2018, 25, 7147–7156. [Google Scholar] [CrossRef]
  100. Souza, F.S.; Da Silva, V.V.; Rosin, C.K.; Hainzenreder, L.; Arenzon, A.; Pizzolato, T.; Jank, L.; Féris, L.A. Determination of pharmaceutical compounds in hospital wastewater and their elimination by advanced oxidation processes. J. Environ. Sci. Health Part A 2018, 53, 213–221. [Google Scholar] [CrossRef]
  101. Rivera-Jaimes, J.A.; Postigo, C.; Melgoza-Alemán, R.M.; Aceña, J.; Barceló, D.; López de Alda, M. Study of pharmaceuticals in surface and wastewater from Cuernavaca, Morelos, Mexico: Occurrence and environmental risk assessment. Sci. Total Environ. 2018, 613–614, 1263–1274. [Google Scholar] [CrossRef]
  102. Salas, D.; Borrull, F.; Fontanals, N.; Marcé, R.M. Combining cationic and anionic mixed-mode sorbents in a single cartridge to extract basic and acidic pharmaceuticals simultaneously from environmental waters. Anal. Bioanal. Chem. 2018, 410, 459–469. [Google Scholar] [CrossRef]
  103. Kafeenah, H.I.S.; Osman, R.; Bakar, N.K.A. Disk solid-phase extraction of multi-class pharmaceutical residues in tap water and hospital wastewater, prior to ultra-performance liquid chromatographic-tandem mass spectrometry (UPLC-MS/MS) analyses. Rsc Adv. 2018, 8, 40358–40368. [Google Scholar] [CrossRef] [Green Version]
  104. Kanama, K.M.; Daso, A.P.; Mpenyana-Monyatsi, L.; Coetzee, M.A.A. Assessment of Pharmaceuticals, Personal Care Products, and Hormones in Wastewater Treatment Plants Receiving Inflows from Health Facilities in North West Province, South Africa. J. Toxicol. 2018, 2018, 3751930. [Google Scholar] [CrossRef] [PubMed]
  105. da Silva, D.C.; Oliveira, C.C. Development of Micellar HPLC-UV Method for Determination of Pharmaceuticals in Water Samples. J. Anal. Methods Chem. 2018, 2018, 9143730. [Google Scholar] [CrossRef]
  106. Bade, R.; White, J.M.; Gerber, C. Qualitative and quantitative temporal analysis of licit and illicit drugs in wastewater in Australia using liquid chromatography coupled to mass spectrometry. Anal. Bioanal. Chem. 2018, 410, 529–542. [Google Scholar] [CrossRef]
  107. Trinh, A.; Marlatt, L.; Bell, D.S. Controlling SPE Selectivity Through pH and Organic Modifier Manipulation. Reporter EU 2020, 21. Available online: https://www.sigmaaldrich.com/technical-documents/articles/reporter-eu/controlling-spe-selectivity.html (accessed on 6 November 2020).
  108. Moldenhauer, J. Disinfection and Decontamination: A Practical Handbook; CRC Press: Boca Raton, FL, USA, 2018. [Google Scholar]
  109. Kumari, P.K.; Akhila, S.; Rao, Y.S.; Devi, B.R. Alternative to Artificial Preservatives. Syst. Rev. Pharm. 2019, 10, 99–102. [Google Scholar]
  110. Paíga, P.; Santos, L.H.M.L.M.; Delerue-Matos, C. Development of a multi-residue method for the determination of human and veterinary pharmaceuticals and some of their metabolites in aqueous environmental matrices by SPE-UHPLC-MS/MS. J. Pharm. Biomed. Anal. 2017, 135, 75–86. [Google Scholar] [CrossRef] [Green Version]
  111. Basaglia, G.; Pietrogrande, M.C. Optimization of a SPME/GC/MS Method for the Simultaneous Determination of Pharmaceuticals and Personal Care Products in Waters. Chromatographia 2012, 75, 361–370. [Google Scholar] [CrossRef]
Figure 1. Pharmaceuticals and personal care products (PPCPs) extraction procedures according to the percentage of studies that applied them. SPE: solid-phase extraction.
Figure 1. Pharmaceuticals and personal care products (PPCPs) extraction procedures according to the percentage of studies that applied them. SPE: solid-phase extraction.
Molecules 25 05204 g001
Figure 2. Percentage of studies according to water volume.
Figure 2. Percentage of studies according to water volume.
Molecules 25 05204 g002
Figure 3. Percentage of studies according to the type of eluent used.
Figure 3. Percentage of studies according to the type of eluent used.
Molecules 25 05204 g003
Figure 4. Configuration of the online SPE liquid chromatography tandem mass spectrometry (SPE-LC-MS/MS) system. I. separation column equilibration (pump A and B); II. sample loading and trapping (pump C); III. SPE desorption (pump A and B) and cleaning (pump D). Reproduced from [68] with permission from Elsevier. (a) Sample loading (Pump A, B, and C: On); (b) Sample analysis (Pump A, B, and D: On).
Figure 4. Configuration of the online SPE liquid chromatography tandem mass spectrometry (SPE-LC-MS/MS) system. I. separation column equilibration (pump A and B); II. sample loading and trapping (pump C); III. SPE desorption (pump A and B) and cleaning (pump D). Reproduced from [68] with permission from Elsevier. (a) Sample loading (Pump A, B, and C: On); (b) Sample analysis (Pump A, B, and D: On).
Molecules 25 05204 g004
Figure 5. Percentage of studies according to the number of PPCPs analyzed.
Figure 5. Percentage of studies according to the number of PPCPs analyzed.
Molecules 25 05204 g005
Table 1. Selected applications extraction approaches to determine PPCPs in water samples.
Table 1. Selected applications extraction approaches to determine PPCPs in water samples.
Matrix *No. of PPCPsPreservationVolume (mL)Extraction MethodSorbent or CartridgeDetectionRecovery %Reference
WW, SF168Na4EDTA50SPEClearnert PEP-2HPLC-MS/MS0.05–127[32]
WW, SF168Na4EDTA-Direct injection-HPLC-MS/MS0.05–127[32]
SF59Na2EDTA1000SPEOasis HLBHPLC-MS/MS52–137[33]
WW, SF, DW27--SPECleanert PEPHPLC-MS/MS74–120[34]
WW55Na2EDTA150SPEOasis HLBHPLC-MS/MS9–119[35]
SW91-1000SPEOasis HLBHPLC-MS/MS70–110[36]
WW12-7.9DLLME-GC-MS/MS91–115[37]
WW, SW12-1000SPEOasis HLBGC-MS/MS65–115[38]
WW, SF, DW58-1.8Online-SPEPLRP-sHPLC-MS/MS70–120 (82% of total)[39]
SW62-≤20Online-SPEOasis HLBHPLC-MS/MS81–120[40]
SW62-200SPEOasis HLBHPLC-MS/MS81–121[40]
WW, SW44Na2EDTA200SPEOasis HLBHPLC-MS/MS8–239[41]
SW11-200SPEStrata-XHPLC-MS/MS40–120[42]
SW34Na2EDTA400SPEOasis HLBHPLC-MS/MS41–125[43]
WW, SW30Na2EDTA250SPEOasis MCXHPLC-MS/MS78–106[44]
SW10-500SPEOasis HLBHPLC-MS/MS69–88[45]
WW11--Online-SPETurboFlow™ columnHPLC-MS/MS45–150[46]
SW16-10DLLME-HPLC-MS/MS70–120[47]
WW, SW27Na2EDTA125–500SPEOasis MCXHPLC-MS/MS73–116[48]
WW, SW25 (of 41)Na2EDTA120PES microextraction -HPLC-MS/MS80–119[49]
WW, SW25 (of 41)Na2EDTA100–250SPEOasis HLBHPLC-MS/MS71–131[49]
WW, SW10-20 uLOnline-SPEOasis HLBHPLC-MS/MS-[50]
SW12-500SPEOasis HLBHPLC-MS/MS55–120[51]
WW, SW44-500SPE innovativeGCHM, Oasis HLBHPLC-MS/MS76[52]
WW190-100SPE innovativeOasis HLB, Isolute ENV+, UPLC-Q-TOF-MS/MS57–120[53]
Strata-X-AW, Strata-X-CV
WW52-100Disk SPEBAKERBOND C18 Polar PlusGC-TOF-MS-[54]
SW24Na2EDTA1000SPEChromabond HR-XHPLC-MS/MS52–117[55]
SW13Na2EDTA250SPEStrata-XHPLC-MS/MS51–102[56]
SW32-200SPEStrata-XHPLC-MS/MS36–119[57]
SW32-200SPEStrata-X-CWHPLC-MS/MS25–110[57]
SP111-150SPEStrata-X-CWSFC-MS/MS77 (average)[58]
WW, SW40-250SPEOasis HLBHPLC-MS/MS17–146[59]
WW11-250SPEOasis HLBHPLC-MS/MS53–124[60]
SW39-1000SPEOasis HLBHPLC-MS/MS1–125[61]
WW15-250SPE innovativeStrata-X, PSA, Alumina GC-MS19–103[62]
SW69-100SPE Strata X-CWSFC-MS/MS76[63]
WW, SW31-100–500SPEChromabond HR-XHPLC-MS/MS32–97[64]
SW130Na2EDTA2000SPE innovativeOasis WAX, Oasis HLB,HPLC-MS/MS50–150[65]
Sep-Pak Plus AC 2
WW, DW28-1000SPE C18 CartridgesHPLC-MS/MSn.r.–293[66]
WW, SW10Na2EDTA500SPEOasis HLBUPLC-Q-TOF-MS/MSn.r.–128[20]
WW, SW23-500SPEOasis MCXHPLC-MS/MS54–117[67]
WW52Na2EDTA10Online-SPEShim-pack MAYI-ODSHPLC-MS/MS74–104[68]
SW20Na2EDTA100SPEStrata-XHPLC-MS/MS70–119[69]
WW, SW20-200SPEStrata-X-Drug BHPLC-MS/MS39–102[70]
SW61Na2EDTA1000Disk SPESpeedisk®HPLC-MS/MS-[71]
SW61Na2EDTA200SPE Oasis HLBHPLC-MS/MS-[71]
WW26Na2EDTA500SPEOasis HLBHPLC-MS/MS-[72]
WW10--SPEOasis HLBHPLC-MS/MS85–94[73]
SW35Na2EDTA1000SPEOasis HLBHPLC-MS/MS58–194[74]
WW, SW20-300–400SPEOasis HLB Prime GC-MS≥40%[75]
WW83Na2EDTA50–100SPEStrata-XHPLC-MS/MSn.r.–122[76]
WW59 Ascorbic acid; Na2EDTA 1000SPEOasis HLBHPLC-MS/MS9–143[77]
WW20Sodium thiosulfate500Online-SPEOasis HLBHPLC-MS/MS-[78]
WW20Sodium thiosulfate-Direct injection-HPLC-MS/MS-[78]
SW13--Passive samplingPES membranes LC-DAD-[79]
WW21-1000SPEOasis HLBLC-HRMS40 (average)[80]
WW, SW103 (of 300)Formaldehyde 250SPE innovativeStrata-XUPLC- Q-TOF-MS/MS-[81]
WW37-0.5Online-SPEPLRPsHPLC-MS/MS5–132[82]
WW20-2Direct injection-HPLC-MS/MS60–124[83]
WW12-20–100SPEOasis HLBHPLC-MS/MS77–115[84]
WW, SW48-300–400SPEOasis HLB Prime GC-MS>40[85]
WW38-100SPEOasis MCXHPLC-MS/MS65–134[86]
SW33-200SPE innovativeOasis HLB, LC18 columnHPLC-MS/MS50–106[87]
SP48Na4EDTA200SPEOasis MCXHPLC-MS/MS71–122[88]
WW22NaCl100Online SPEDVB/CAR/PDMSGC-MS6–104[89]
WW19-250SPEOasis HLBLC-TOF/MS5–111[90]
WW11-0.9DLLME-HPLC-MS/MSn.r.–124[91]
WW, SW40
(of 139)
-1000SPEOasis HLBHPLC-MS/MSn.r.–99[92]
WW, SW41
(of 139)
-1000SPEBond-Elut ENVHPLC-MS/MSn.r.–99[92]
SW10 (of 28)-500Buckypaper Device-HPLC-MS/MSn.r.–102[93]
SW44-200SPEStrata-XHPLC-MS/MS85–100[94]
SW45Na2EDTA1000SPEStrata-XHPLC-MS/MS38–112[95]
WW13-150–300SPEOasis HLBHPLC-MS/MS40–115[96]
SW42Na2EDTA; ASA(DW)50SPEOasis HLBHPLC-MS/MS33–117[97]
WW, SW39 (of 80)-500–100SPEOasis MCX; Oasis HLBHPLC-MS/MS31–131[98]
SW110
(of 1153)
Phosphate buffer1000Disk SPEGlass microfiber,GC-TOF-MS/MS -[99]
Empore™ SDB-XD, Empore™ AC
WW82-250SPEOasis HLBLC–Q-TOF-MS66–149[100]
SW35-100–500SPEOasis HLBHPLC-MS/MS2–132[101]
WW, SW10-50–100SPE innovativeOasis MCX, Oasis MAXLC-HRMS60–109[102]
WW, SW10Sodium azide;200–1000Disk SPEAtlantic HLBHPLC-MS/MS48–122[103]
ascorbic acid
WW, SW10Sodium azide200-1000SPEOasis HLBHPLC-MS/MS1–110[103]
ascorbic acid
WW17-250SPEOasis HLBHPLC-MS/MS<40%[104]
SW10Citric acid1000SPEC18HPLC-MS/MS97–101[105]
WW100-200SPEUCT XRDAHLC-Q-TOF-MS/MS-[106]
* WW = Wastewater; SF = Surface water; SP = Swimming pool water. n.r. = not recovered.
Table 2. Mechanism, type of sorbent and target of the most used brand name of offline columns.
Table 2. Mechanism, type of sorbent and target of the most used brand name of offline columns.
Brand NameMechanismSorbentTarget
Oasis HLB, HLB PrimeRPdivinylbenzene-co-N-vinylpyrrolidoneacidic, basic, and neutral compounds
STRATA-XRPstyrene-divinylbenzene-co-N-vinylpyrrolidoneacidic, basic, and neutral compounds
Cleanert PEPRPdivinylbenzene-co-N-vinylpyrrolidone-Ureaacidic, basic, and neutral compounds
Isolute ENV+RPpolystyrene-divinylbenzene (PS-DVB)polar compounds
Bond-Elut ENVRPpolystyrene-divinylbenzene (PS-DVB)polar compounds
Chromabond HR-XRPpolystyrene-divinylbenzene (PS-DVB)polar compounds
Oasis MCXICmixed-mode CATION-exchange polymer-basedbasic compounds, particularly strong bases
Oasis WAXICmixed-mode ANION-exchange sorbent polymer-basedacidic compounds
Strata-X-CWICmixed-mode CATION-exchange polymer-basedbasic compounds, particularly strong bases
Strata-X-AWICmixed-mode ANION-exchange sorbent Polymer-basedacidic compounds
Strata-X-Drug BICmixed-mode strong CATION-exchange polymer-basedbasic compounds, particularly strong bases
UCT XRDAHICmixed-mode CATION-exchange polymer-basedbasic compounds, particularly strong bases
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Share and Cite

MDPI and ACS Style

Sadutto, D.; Picó, Y. Sample Preparation to Determine Pharmaceutical and Personal Care Products in an All-Water Matrix: Solid Phase Extraction. Molecules 2020, 25, 5204. https://doi.org/10.3390/molecules25215204

AMA Style

Sadutto D, Picó Y. Sample Preparation to Determine Pharmaceutical and Personal Care Products in an All-Water Matrix: Solid Phase Extraction. Molecules. 2020; 25(21):5204. https://doi.org/10.3390/molecules25215204

Chicago/Turabian Style

Sadutto, Daniele, and Yolanda Picó. 2020. "Sample Preparation to Determine Pharmaceutical and Personal Care Products in an All-Water Matrix: Solid Phase Extraction" Molecules 25, no. 21: 5204. https://doi.org/10.3390/molecules25215204

Article Metrics

Back to TopTop