Reprint
Advanced Characterization and On-Line Process Monitoring of Additively Manufactured Materials and Components
Edited by
January 2023
284 pages
- ISBN978-3-0365-5813-4 (Hardback)
- ISBN978-3-0365-5814-1 (PDF)
This book is a reprint of the Special Issue Advanced Characterization and On-Line Process Monitoring of Additively Manufactured Materials and Components that was published in
Chemistry & Materials Science
Engineering
Summary
This reprint is concerned with the microstructural characterization and the defect analysis of metallic additively manufactured (AM) materials and parts. Special attention is paid to the determination of residual stress in such parts and to online monitoring techniques devised to predict the appearance of defects. Finally, several non-destructive testing techniques are employed to assess the quality of AM materials and parts.
Format
- Hardback
License
© 2022 by the authors; CC BY-NC-ND license
Keywords
residual stress; synchrotron X-ray diffraction; additive manufacturing; Ti-6Al-4V; laser powder bed fusion (L-PBF); selective laser melting (SLM); additive manufacturing (AM); process monitoring; infrared thermography; optical tomography; computed tomography (CT); data fusion; lack-of-fusion; direct metal laser sintering; Ti6Al4V (ELI); dynamic properties; Split Hopkinson Pressure Bar; flow stress; fracture strain; residual stress; WAAM; Ti-6Al-4V; additive manufacturing; neutron diffraction; hybrid manufacturing; additive manufacturing; Laser Powder Bed Fusion; LPBF; AISI 316L; online process monitoring; thermography; residual stress; neutron diffraction; X-ray diffraction; computed tomography; laser melting deposition; 3D printing; X-ray computed tomography; porosity; non-destructive analysis; laser powder bed fusion (L-PBF); selective laser melting (SLM); laser beam melting (LBM); thermography; emissivity; calibration; thermocouples; 316L; IN718; process monitoring; additive manufacturing; feedstock powder; porosity; radiography; digital detector array; numerical simulation; detectability; selective laser melting (SLM); additive manufacturing (AM); process monitoring; infrared thermography; optical tomography; X-ray computed tomography (XCT); healing; in situ monitoring; additive manufacturing; laser powder bed fusion; selective laser melting; laser beam melting; in-situ process monitoring; thermography; heat accumulation; inter layer time; cellular substructure; powder bed fusion (PBF); eddy current testing (ECT); part quality; in situ relative part density measurement; quality management; laser-based additive manufacturing; residual stress analysis; X-ray and neutron diffraction; diffraction-elastic constants; strain-free lattice spacing; additive manufacturing; subsurface defects; laser ultrasound; stainless steel; selective laser melting (SLM); laser powder bed fusion (L-PBF); additive manufacturing (AM); process monitoring; infrared thermography; X-ray micro computed tomography (XCT); defect detection; image registration; n/a