remotesensing-logo

Journal Browser

Journal Browser

First Experiences with European Sentinel-2 Multi-Spectral Imager (MSI)

A special issue of Remote Sensing (ISSN 2072-4292). This special issue belongs to the section "Remote Sensing in Agriculture and Vegetation".

Deadline for manuscript submissions: closed (31 August 2016) | Viewed by 380278

Special Issue Editor

Institute of Geomatics, University of Natural Resources and Life Sciences, 1090 Vienna, Austria
Interests: remote sensing of vegetation with focus on time series analysis and use of physically based radiative transfer models for mapping biochemical and biophysical traits
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear colleagues,

Sentinel-2A was launched on 23 June 2015 as part of the European Commission’s Copernicus program. The satellite delivers high resolution (deca-metric) images since end of June 2015. The data is of a high quality, as Sentinel-2 carries an innovative wide swath high-resolution multispectral imager (MSI) with 13 spectral bands, thus, permitting for an unprecedented perspective on our land and vegetation. The combination of high resolution (up to 10 m), novel spectral capabilities (e.g., three bands in the red-edge), wide coverage (swath width of 290 km) and 10-day revisit time (five days from 2016 onwards after launch of Sentinel-2B) will provide extremely useful information for a wide range of applications. The mission will, for example, provide information for agricultural and forestry practices and the monitoring of natural resources and disturbances. The spectral bands are particularly suitable for assessing important vegetation structural and bio-chemical variables. As well as monitoring plant growth and vegetation status/health, Sentinel-2 can also be used to map changes in land cover and land use. It will also provide information on the status of lakes and coastal waters, snow, and ice. Images of floods, volcanic eruptions and landslides are expected to contribute to disaster mapping and help humanitarian relief efforts.

We would like to invite you to submit articles about your recent research with respect to the following topics, possibly including a comparison with other (optical) sensors data (e.g., Landsat)—Obviously, review articles covering one or more of these topics are also very welcome:

  • Mission status and planned/operational products
  • Calibration and validation activities of Sentinel-2 (e.g., regarding radiometry, geometry) and instrument characteristics
  • Status of collaborative ground segements (CGS)
  • Radiometric and atmospheric correction of Sentinel-2 data
  • Data inter-calibration and creation of long consistent time series (e.g., combination with Landsat)
  • Combined use of Sentinel-2 data and other sensor data (e.g., LIDAR, microwaves, thermal scanners) and fusion approaches
  • Suitability of Sentinel-2 data for agricultural applications (e.g., mapping of crop types, acreages, yield predictions, precision agriculture)
  • Suitability of Sentinel-2 for LCLU mapping and LC change detection (object- and pixel-based approaches)
  • Suitability of Sentinel-2 for assessing vegetation dynamics and disturbances
  • Suitability of Sentinel-2 for forestry applications at local, regional, national and continental scales
  • Suitability of Sentinel-2 for the assessment and monitoring of vegetation structure (e.g., LAI,  fAPAR, fCover, biomass) and vegetation bio-chemical composition (e.g., pigmentation, leaf water content)
  • Assimilation of Sentinel-2 data in dynamic process models
  • Suitability of Sentinel-2 for monitoring and mapping inland and coastal waters
  • Suitability of Sentinel-2 for assessment and protection of natural resources
  • Suitability of Sentinel-2 for habitat mapping, bio-diversity assessments
  • Suitability of Sentinel-2 for urban studies
  • Suitability of Sentinel-2 for geology and soil sciences
  • Suitability of Sentinel-2 for studies on snow, ice and glaciers
  • Suitability of Sentinel-2 for geohazards and disaster monitoring
  • Tools, toolboxes and algorithms for analysing Sentinel-2 data
Authors are required to check and follow specific Instructions to Authors, see https://dl.dropboxusercontent.com/u/165068305/Remote_Sensing-Additional_Instructions.pdf.

Prof. Clement Atzberger
Guest Editor

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Remote Sensing is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2700 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Related Special Issue

Published Papers (39 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

Jump to: Other

23 pages, 5468 KiB  
Article
Sentinel-2 Reference Fire Perimeters for the Assessment of Burned Area Products over Latin America and the Caribbean for the Year 2019
by Jon Gonzalez-Ibarzabal, Magí Franquesa, Armando Rodriguez-Montellano and Aitor Bastarrika
Remote Sens. 2024, 16(7), 1166; https://doi.org/10.3390/rs16071166 - 27 Mar 2024
Viewed by 227
Abstract
The increasing availability of products generating burned area (BA) maps in recent years necessitates the creation of more accurate reference perimeters to validate these products and provide users with information about their accuracy. For this purpose, reference perimeters were created using Sentinel-2 images [...] Read more.
The increasing availability of products generating burned area (BA) maps in recent years necessitates the creation of more accurate reference perimeters to validate these products and provide users with information about their accuracy. For this purpose, reference perimeters were created using Sentinel-2 images in Latin America and the Caribbean (LAC) for the year 2019. The sampling was adapted to the peculiarities of the Sentinel-2 tiling grid system, and statistically representative sample units were selected for biomes and fire activity through stratified random sampling. Fire perimeters were extracted using a Random Forest supervised classification and results were manually supervised and refined. Efforts were made to maximize the temporal length covered by the reference perimeters for each sample, aiming to minimize temporal errors when using the perimeters for validation. The dataset covers 569,214.2 (3.5% burned, 88.7% unburned, and 7.8% unobserved). These perimeters were compared with higher spatial resolution PlanetScope-derived perimeters, resulting in 8.4% commission errors and 3.8% omission errors. As a validation exercise, MCD64A1 and FireCCI51 global burned area products were validated using the Sentinel-2 reference dataset created, confirming that the temporal extent of the reference perimeters significantly affects the validation of such products. The reference fire perimeters are publicly available in the Burned Area Reference Database (BARD). Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
18 pages, 3855 KiB  
Article
Optimal Sample Size and Composition for Crop Classification with Sen2-Agri’s Random Forest Classifier
by Urs Schulthess, Francelino Rodrigues, Matthieu Taymans, Nicolas Bellemans, Sophie Bontemps, Ivan Ortiz-Monasterio, Bruno Gérard and Pierre Defourny
Remote Sens. 2023, 15(3), 608; https://doi.org/10.3390/rs15030608 - 19 Jan 2023
Cited by 1 | Viewed by 1977
Abstract
Sen2-Agri is a software system that was developed to facilitate the use of multi-temporal satellite data for crop classification with a random forest (RF) classifier in an operational setting. It automatically ingests and processes Sentinel-2 and LandSat 8 images. Our goal was to [...] Read more.
Sen2-Agri is a software system that was developed to facilitate the use of multi-temporal satellite data for crop classification with a random forest (RF) classifier in an operational setting. It automatically ingests and processes Sentinel-2 and LandSat 8 images. Our goal was to provide practitioners with recommendations for the best sample size and composition. The study area was located in the Yaqui Valley in Mexico. Using polygons of more than 6000 labeled crop fields, we prepared data sets for training, in which the nine crops had an equal or proportional representation, called Equal or Ratio, respectively. Increasing the size of the training set improved the overall accuracy (OA). Gains became marginal once the total number of fields approximated 500 or 40 to 45 fields per crop type. Equal achieved slightly higher OAs than Ratio for a given number of fields. However, recall and F-scores of the individual crops tended to be higher for Ratio than for Equal. The high number of wheat fields in the Ratio scenarios, ranging from 275 to 2128, produced a more accurate classification of wheat than the maximal 80 fields of Equal. This resulted in a higher recall for wheat in the Ratio than in the Equal scenarios, which in turn limited the errors of commission of the non-wheat crops. Thus, a proportional representation of the crops in the training data is preferable and yields better accuracies, even for the minority crops. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Figure 1

21 pages, 3216 KiB  
Article
Comparing Sentinel-2 and Landsat 8 for Burn Severity Mapping in Western North America
by Alexander A. Howe, Sean A. Parks, Brian J. Harvey, Saba J. Saberi, James A. Lutz and Larissa L. Yocom
Remote Sens. 2022, 14(20), 5249; https://doi.org/10.3390/rs14205249 - 20 Oct 2022
Cited by 10 | Viewed by 3229
Abstract
Accurate assessment of burn severity is a critical need for an improved understanding of fire behavior and ecology and effective post-fire management. Although NASA Landsat satellites have a long history of use for remotely sensed mapping of burn severity, the recently launched (2015 [...] Read more.
Accurate assessment of burn severity is a critical need for an improved understanding of fire behavior and ecology and effective post-fire management. Although NASA Landsat satellites have a long history of use for remotely sensed mapping of burn severity, the recently launched (2015 and 2017) European Space Agency Sentinel-2 satellite constellation offers increased temporal and spatial resolution with global coverage, combined with free data access. Evaluations of burn severity derived from Landsat and Sentinel generally show comparable results, but these studies only assessed a small number of fires with limited field data. We used 912 ground calibration plots from 26 fires that burned between 2016 and 2019 in western North America to compare Sentinel- and Landsat-derived burn severity estimates with the field-based composite burn index. We mapped burn severity using two methods; the well-established paired scene approach, in which a single pre- and post-fire scene are selected for each fire, and also a mean image compositing approach that automatically integrates multiple scenes using the cloud-based remote sensing platform Google Earth Engine. We found that Sentinel generally performed as well or better than Landsat for four spectral indices of burn severity, particularly when using atmospherically corrected Sentinel imagery. Additionally, we tested the effects of mapping burn severity at Sentinel’s finer spatial resolution (10 m) on estimates of the spatial complexity of stand-replacing fire, resulting in a 5% average reduction per-fire in area mapped as high-severity patch interiors (24,273 ha total) compared to mapping at the resolution of Landsat (30 m). These findings suggest Sentinel may improve ecological discrimination of fine-scale fire effects, but also warrant caution when comparing estimates of burn severity spatial patterns derived at different resolutions. Overall, these results indicate that burn severity mapping will benefit substantially from the integration of Sentinel imagery through increased imagery availability, and that Sentinel’s higher spatial resolution improves opportunities for examining finer-scale fire effects across ecosystems. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Figure 1

19 pages, 2864 KiB  
Article
A First Approach to Determine If It Is Possible to Delineate In-Season N Fertilization Maps for Wheat Using NDVI Derived from Sentinel-2
by Asier Uribeetxebarria, Ander Castellón and Ana Aizpurua
Remote Sens. 2022, 14(12), 2872; https://doi.org/10.3390/rs14122872 - 15 Jun 2022
Cited by 9 | Viewed by 2250
Abstract
Adjusting nitrogen fertilization to the nutritional requirements of crops is one of the major challenges of modern agriculture. The amount of N needed is mainly determined by crop yield, so yield maps can be used to optimize N fertilization. As the adoption of [...] Read more.
Adjusting nitrogen fertilization to the nutritional requirements of crops is one of the major challenges of modern agriculture. The amount of N needed is mainly determined by crop yield, so yield maps can be used to optimize N fertilization. As the adoption of yield monitors is low among farmers, implementation of this approach is still low. However, as the Normalized Difference Vegetation Index (NDVI) is related to grain yield, the main objective of this work was to identify at which wheat growth stage a moderate agreement between NDVI and yield is obtained. For this, NDVI images obtained from Sentinel-2 were used, and the evolution of concordance was analyzed in 13 classified parcels of wheat employing the Kappa index (KI). In one-third of the plots, a moderate agreement (KI > 0.4) was reached before the stem elongation growth phase (when the last N application was made). In another one-third, moderate agreement was reached later, in more advanced development stages. For the cases in which this agreement did not exist, an attempt was made to find the causes. The MANOVA and subsequent descriptive discriminant analysis (DDA) showed that the NDVI dates that contribute the most to the differentiation between plots with and without agreement between grain yield maps and NDVI images were those corresponding to tillering. The sum of the NDVI values of the tillering phase was significantly lower in the group of plots that did not show concordance. Sentinel-2 imagery was successful on 66% of plots for delineation of management zones after GS 30, and thus is useful for producing fertilization maps for the upcoming season. However, to produce in-season fertilization maps, further studies are needed to better understand the mechanisms that regulate the relation between yield and NDVI at early growth stages (<GS 30). Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Graphical abstract

27 pages, 11200 KiB  
Article
Detection of Grassland Mowing Events for Germany by Combining Sentinel-1 and Sentinel-2 Time Series
by Sophie Reinermann, Ursula Gessner, Sarah Asam, Tobias Ullmann, Anne Schucknecht and Claudia Kuenzer
Remote Sens. 2022, 14(7), 1647; https://doi.org/10.3390/rs14071647 - 30 Mar 2022
Cited by 14 | Viewed by 3354
Abstract
Grasslands cover one-third of the agricultural area in Germany and play an important economic role by providing fodder for livestock. In addition, they fulfill important ecosystem services, such as carbon storage, water purification, and the provision of habitats. These ecosystem services usually depend [...] Read more.
Grasslands cover one-third of the agricultural area in Germany and play an important economic role by providing fodder for livestock. In addition, they fulfill important ecosystem services, such as carbon storage, water purification, and the provision of habitats. These ecosystem services usually depend on the grassland management. In central Europe, grasslands are grazed and/or mown, whereby the management type and intensity vary in space and time. Spatial information on the mowing timing and frequency on larger scales are usually not available but would be required in order to assess the ecosystem services, species composition, and grassland yields. Time series of high-resolution satellite remote sensing data can be used to analyze the temporal and spatial dynamics of grasslands. Within this study, we aim to overcome the drawbacks identified by previous studies, such as optical data availability and the lack of comprehensive reference data, by testing the time series of various Sentinel-2 (S2) and Sentinal-1 (S1) parameters and combinations of them in order to detect mowing events in Germany in 2019. We developed a threshold-based algorithm by using information from a comprehensive reference dataset of heterogeneously managed grassland parcels in Germany, obtained by RGB cameras. The developed approach using the enhanced vegetation index (EVI) derived from S2 led to a successful mowing event detection in Germany (60.3% of mowing events detected, F1-Score = 0.64). However, events shortly before, during, or shortly after cloud gaps were missed and in regions with lower S2 orbit coverage fewer mowing events were detected. Therefore, S1-based backscatter, InSAR, and PolSAR features were investigated during S2 data gaps. From these, the PolSAR entropy detected mowing events most reliably. For a focus region, we tested an integrated approach by combining S2 and S1 parameters. This approach detected additional mowing events, but also led to many false positive events, resulting in a reduction in the F1-Score (from 0.65 of S2 to 0.61 of S2 + S1 for the focus region). According to our analysis, a majority of grasslands in Germany are only mown zero to two times (around 84%) and are probably additionally used for grazing. A small proportion is mown more often than four times (3%). Regions with a generally higher grassland mowing frequency are located in southern, south-eastern, and northern Germany. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Graphical abstract

27 pages, 25782 KiB  
Article
Understanding the Requirements for Surveys to Support Satellite-Based Crop Type Mapping: Evidence from Sub-Saharan Africa
by George Azzari, Shruti Jain, Graham Jeffries, Talip Kilic and Siobhan Murray
Remote Sens. 2021, 13(23), 4749; https://doi.org/10.3390/rs13234749 - 23 Nov 2021
Cited by 8 | Viewed by 5363
Abstract
This paper provides recommendations on how large-scale household surveys should be conducted to generate the data needed to train models for satellite-based crop type mapping in smallholder farming systems. The analysis focuses on maize cultivation in Malawi and Ethiopia, and leverages rich, georeferenced [...] Read more.
This paper provides recommendations on how large-scale household surveys should be conducted to generate the data needed to train models for satellite-based crop type mapping in smallholder farming systems. The analysis focuses on maize cultivation in Malawi and Ethiopia, and leverages rich, georeferenced plot-level data from national household surveys that were conducted in 2018–20 and integrated with Sentinel-2 satellite imagery and complementary geospatial data. To identify the approach to survey data collection that yields optimal data for training remote sensing models, 26,250 in silico experiments are simulated within a machine learning framework. The best model is then applied to map seasonal maize cultivation from 2016 to 2019 at 10-m resolution in both countries. The analysis reveals that smallholder plots with maize cultivation can be identified with up to 75% accuracy. Collecting full plot boundaries or complete plot corner points provides the best quality of information for model training. Classification performance peaks with slightly less than 60% of the training data. Seemingly little erosion in accuracy under less preferable approaches to georeferencing plots results in the total area under maize cultivation being overestimated by 0.16–0.47 million hectares (8–24%) in Malawi. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Figure 1

21 pages, 4425 KiB  
Article
Estimating Crop Biophysical Parameters Using Machine Learning Algorithms and Sentinel-2 Imagery
by Mahlatse Kganyago, Paidamwoyo Mhangara and Clement Adjorlolo
Remote Sens. 2021, 13(21), 4314; https://doi.org/10.3390/rs13214314 - 27 Oct 2021
Cited by 23 | Viewed by 3890
Abstract
Global food security is critical to eliminating hunger and malnutrition. In the changing climate, farmers in developing countries must adopt technologies and farming practices such as precision agriculture (PA). PA-based approaches enable farmers to cope with frequent and intensified droughts and heatwaves, optimising [...] Read more.
Global food security is critical to eliminating hunger and malnutrition. In the changing climate, farmers in developing countries must adopt technologies and farming practices such as precision agriculture (PA). PA-based approaches enable farmers to cope with frequent and intensified droughts and heatwaves, optimising yields, increasing efficiencies, and reducing operational costs. Biophysical parameters such as Leaf Area Index (LAI), Leaf Chlorophyll Content (LCab), and Canopy Chlorophyll Content (CCC) are essential for characterising field-level spatial variability and thus are necessary for enabling variable rate application technologies, precision irrigation, and crop monitoring. Moreover, robust machine learning algorithms offer prospects for improving the estimation of biophysical parameters due to their capability to deal with non-linear data, small samples, and noisy variables. This study compared the predictive performance of sparse Partial Least Squares (sPLS), Random Forest (RF), and Gradient Boosting Machines (GBM) for estimating LAI, LCab, and CCC with Sentinel-2 imagery in Bothaville, South Africa and identified, using variable importance measures, the most influential bands for estimating crop biophysical parameters. The results showed that RF was superior in estimating all three biophysical parameters, followed by GBM which was better in estimating LAI and CCC, but not LCab, where sPLS was relatively better. Since all biophysical parameters could be achieved with RF, it can be considered a good contender for operationalisation. Overall, the findings in this study are significant for future biophysical product development using RF to reduce reliance on many algorithms for specific parameters, thus facilitating the rapid extraction of actionable information to support PA and crop monitoring activities. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Graphical abstract

29 pages, 27066 KiB  
Article
Prototyping a Generic Algorithm for Crop Parameter Retrieval across the Season Using Radiative Transfer Model Inversion and Sentinel-2 Satellite Observations
by Jiří Tomíček, Jan Mišurec and Petr Lukeš
Remote Sens. 2021, 13(18), 3659; https://doi.org/10.3390/rs13183659 - 13 Sep 2021
Cited by 6 | Viewed by 2370
Abstract
In this study, Sentinel-2 data were used for the retrieval of three key biophysical parameters of crops: leaf area index (LAI), leaf chlorophyll content (LCC), and leaf water content (LWC) for dominant crop types in the Czech Republic, including winter wheat (Triticum [...] Read more.
In this study, Sentinel-2 data were used for the retrieval of three key biophysical parameters of crops: leaf area index (LAI), leaf chlorophyll content (LCC), and leaf water content (LWC) for dominant crop types in the Czech Republic, including winter wheat (Triticum aestivum), spring barley (Hordeum vulgare), winter rapeseed (Brassica napus subsp. napus), alfalfa (Medicago sativa), sugar beet (Beta vulgaris), and corn (Zea mays subsp. Mays) in different stages of crop development. Artificial neural networks were applied in combination with an approach using look-up tables that is based on PROSAIL simulations to retrieve the biophysical properties tailored for each crop type. Crop-specific PROSAIL model optimization and validation were based upon a large dataset of in situ measurements collected in 2017 and 2018 in lowland of Central Bohemia region. For LCC and LAI, respectively, low relative root mean square error (rRMSE; 25%, 37%) was achieved. Additionally, a relatively strong correlation with in situ measurements (r = 0.80) was obtained for LAI. On the contrary, the results of the LWC parameter retrieval proved to be unsatisfactory. We have developed a generic tool for biophysical monitoring of agricultural crops based on the interpretation of Sentinel-2 satellite data by inversion of the radiation transfer model. The resulting crop condition maps can serve as precision agriculture inputs for selective fertilizer and irrigation application as well as for yield potential assessment. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Graphical abstract

25 pages, 11179 KiB  
Article
Mapping Crop Types and Cropping Systems in Nigeria with Sentinel-2 Imagery
by Esther Shupel Ibrahim, Philippe Rufin, Leon Nill, Bahareh Kamali, Claas Nendel and Patrick Hostert
Remote Sens. 2021, 13(17), 3523; https://doi.org/10.3390/rs13173523 - 05 Sep 2021
Cited by 30 | Viewed by 6566
Abstract
Reliable crop type maps from satellite data are an essential prerequisite for quantifying crop growth, health, and yields. However, such maps do not exist for most parts of Africa, where smallholder farming is the dominant system. Prevalent cloud cover, small farm sizes, and [...] Read more.
Reliable crop type maps from satellite data are an essential prerequisite for quantifying crop growth, health, and yields. However, such maps do not exist for most parts of Africa, where smallholder farming is the dominant system. Prevalent cloud cover, small farm sizes, and mixed cropping systems pose substantial challenges when creating crop type maps for sub-Saharan Africa. In this study, we provide a mapping scheme based on freely available Sentinel-2A/B (S2) time series and very high-resolution SkySat data to map the main crops—maize and potato—and intercropping systems including these two crops on the Jos Plateau, Nigeria. We analyzed the spectral-temporal behavior of mixed crop classes to improve our understanding of inter-class spectral mixing. Building on the Framework for Operational Radiometric Correction for Environmental monitoring (FORCE), we preprocessed S2 time series and derived spectral-temporal metrics from S2 spectral bands for the main temporal cropping windows. These STMs were used as input features in a hierarchical random forest classification. Our results provide the first wall-to-wall crop type map for this key agricultural region of Nigeria. Our cropland identification had an overall accuracy of 84%, while the crop type map achieved an average accuracy of 72% for the five relevant crop classes. Our crop type map shows distinctive regional variations in the distribution of crop types. Maize is the dominant crop, followed by mixed cropping systems, including maize–cereals and potato–maize cropping; potato was found to be the least prevalent class. Plot analyses based on a sample of 1166 fields revealed largely homogeneous mapping patterns, demonstrating the effectiveness of our classification system also for intercropped classes, which are temporally and spatially highly heterogeneous. Moreover, we found that small field sizes were dominant in all crop types, regardless of whether or not intercropping was used. Maize–legume and maize exhibited the largest plots, with an area of up to 3 ha and slightly more than 10 ha, respectively; potato was mainly cultivated on fields smaller than 0.5 ha and only a few plots were larger than 1 ha. Besides providing the first spatially explicit map of cropping practices in the core production area of the Jos Plateau, Nigeria, the study also offers guidance for the creation of crop type maps for smallholder-dominated systems with intercropping. Critical temporal windows for crop type differentiation will enable the creation of mapping approaches in support of future smart agricultural practices for aspects such as food security, early warning systems, policies, and extension services. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Graphical abstract

17 pages, 1562 KiB  
Article
Mapping Seasonal Agricultural Land Use Types Using Deep Learning on Sentinel-2 Image Time Series
by Misganu Debella-Gilo and Arnt Kristian Gjertsen
Remote Sens. 2021, 13(2), 289; https://doi.org/10.3390/rs13020289 - 15 Jan 2021
Cited by 27 | Viewed by 5234
Abstract
The size and location of agricultural fields that are in active use and the type of use during the growing season are among the vital information that is needed for the careful planning and forecasting of agricultural production at national and regional scales. [...] Read more.
The size and location of agricultural fields that are in active use and the type of use during the growing season are among the vital information that is needed for the careful planning and forecasting of agricultural production at national and regional scales. In areas where such data are not readily available, an independent seasonal monitoring method is needed. Remote sensing is a widely used tool to map land use types, although there are some limitations that can partly be circumvented by using, among others, multiple observations, careful feature selection and appropriate analysis methods. Here, we used Sentinel-2 satellite image time series (SITS) over the land area of Norway to map three agricultural land use classes: cereal crops, fodder crops (grass) and unused areas. The Multilayer Perceptron (MLP) and two variants of the Convolutional Neural Network (CNN), are implemented on SITS data of four different temporal resolutions. These enabled us to compare twelve model-dataset combinations to identify the model-dataset combination that results in the most accurate predictions. The CNN is implemented in the spectral and temporal dimensions instead of the conventional spatial dimension. Rather than using existing deep learning architectures, an autotuning procedure is implemented so that the model hyperparameters are empirically optimized during the training. The results obtained on held-out test data show that up to 94% overall accuracy and 90% Cohen’s Kappa can be obtained when the 2D CNN is applied on the SITS data with a temporal resolution of 7 days. This is closely followed by the 1D CNN on the same dataset. However, the latter performs better than the former in predicting data outside the training set. It is further observed that cereal is predicted with the highest accuracy, followed by grass. Predicting the unused areas has been found to be difficult as there is no distinct surface condition that is common for all unused areas. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Graphical abstract

19 pages, 5324 KiB  
Article
Mapping the Forage Nitrogen-Phosphorus Ratio Based on Sentinel-2 MSI Data and a Random Forest Algorithm in an Alpine Grassland Ecosystem of the Tibetan Plateau
by Jinlong Gao, Jie Liu, Tiangang Liang, Mengjing Hou, Jing Ge, Qisheng Feng, Caixia Wu and Wenlong Li
Remote Sens. 2020, 12(18), 2929; https://doi.org/10.3390/rs12182929 - 10 Sep 2020
Cited by 9 | Viewed by 3264
Abstract
Nondestructive and accurate estimating of the forage nitrogen–phosphorus (N:P) ratio is conducive to the real-time diagnosis of nutrient limitation and the formulation of a management scheme during the growth and development of forage. New-generation high-resolution remote sensors equipped with strategic red-edge wavebands offer [...] Read more.
Nondestructive and accurate estimating of the forage nitrogen–phosphorus (N:P) ratio is conducive to the real-time diagnosis of nutrient limitation and the formulation of a management scheme during the growth and development of forage. New-generation high-resolution remote sensors equipped with strategic red-edge wavebands offer opportunities and challenges for estimating and mapping forage N:P ratio in support of the sustainable utilization of alpine grassland resources. This study aims to detect the forage N:P ratio as an ecological indicator of grassland nutrient content by employing Sentinel-2 multispectral instrument (MSI) data and a random forest (RF) algorithm. The results showed that the estimation accuracy (R2) of the forage N:P ratio model established by combining the optimized spectral bands and vegetation indices (VIs) is 0.49 and 0.59 in the vigorous growth period (July) and the senescing period (November) of forage, respectively. Moreover, Sentinel-2 MSI B9 and B12 bands contributed greatly to the estimation of the forage N:P ratio, and the VIs (RECI2) constructed by B5 and B8A bands performed well in the estimation of the forage N:P ratio. Overall, it is promising to map the spatial distribution of the forage N:P ratio in alpine grassland using Sentinel-2 MSI data at regional scales. This study will be potentially beneficial in implementing precise positioning of vegetation nutrient deficiency and scientific fertilization management of grassland. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Graphical abstract

19 pages, 5993 KiB  
Article
Investigating Live Fuel Moisture Content Estimation in Fire-Prone Shrubland from Remote Sensing Using Empirical Modelling and RTM Simulations
by Eva Marino, Marta Yebra, Mariluz Guillén-Climent, Nur Algeet, José Luis Tomé, Javier Madrigal, Mercedes Guijarro and Carmen Hernando
Remote Sens. 2020, 12(14), 2251; https://doi.org/10.3390/rs12142251 - 14 Jul 2020
Cited by 27 | Viewed by 4897
Abstract
Previous research has demonstrated that remote sensing can provide spectral information related to vegetation moisture variations essential for estimating live fuel moisture content (LFMC), but accuracy and timeliness still present challenges to using this information operationally. Consequently, many regional administrations are investing important [...] Read more.
Previous research has demonstrated that remote sensing can provide spectral information related to vegetation moisture variations essential for estimating live fuel moisture content (LFMC), but accuracy and timeliness still present challenges to using this information operationally. Consequently, many regional administrations are investing important resources in field campaigns for LFMC monitoring, often focusing on indicator species to reduce sampling time and costs. This paper compares different remote sensing approaches to provide LFMC prediction of Cistus ladanifer, a fire-prone shrub species commonly found in Mediterranean areas and used by fire management services as an indicator species for wildfire risk assessment. Spectral indices (SI) were derived from satellite imagery of different spectral, spatial, and temporal resolution, including Sentinel-2 and two different reflectance products of the Moderate Resolution Imaging Spectrometer (MODIS); MCD43A4 and MOD09GA. The SI were used to calibrate empirical models for LFMC estimation using on ground field LFMC measurements from a monospecific shrubland area located in Madrid (Spain). The empirical models were fitted with different statistical methods: simple (LR) and multiple linear regression (MLR), non-linear regression (NLR), and general additive models with splines (GAMs). MCD43A4 images were also used to estimate LFMC from the inversion of radiative transfer models (RTM). Empirical model predictions and RTM simulations of LFMC were validated and compared using an independent sample of LFMC values observed in the field. Empirical models derived from MODIS products and Sentinel-2 data showed R2 between estimated and observed LFMC from 0.72 to 0.75 and mean absolute errors ranging from 11% to 13%. GAMs outperformed regression methods in model calibration, but NLR had better results in model validation. LFMC derived from RTM simulations had a weaker correlation with field data (R2 = 0.49) than the best empirical model fitted with MCD43A4 images (R2 = 0.75). R2 between observations and LFMC derived from RTM ranged from 0.56 to 0.85 when the validation was performed for each year independently. However, these values were still lower than the equivalent statistics using the empirical models (R2 from 0.65 to 0.94) and the mean absolute errors per year for RTM were still high (ranging from 25% to 38%) compared to the empirical model (ranging 7% to 15%). Our results showed that spectral information derived from Sentinel-2 and different MODIS products provide valuable information for LFMC estimation in C. ladanifer shrubland. However, both empirical and RTM approaches tended to overestimate the lowest LFMC values, and therefore further work is needed to improve predictions, especially below the critical LFMC threshold used by fire management services to indicate higher flammability (<80%). Although lower extreme LFMC values are still difficult to estimate, the proposed empirical models may be useful to identify when the critical threshold for high fire risk has been reached with reasonable accuracy. This study demonstrates that remote sensing data is a promising source of information to derive reliable and cost-effective LFMC estimation models that can be used in operational wildfire risk systems. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Graphical abstract

21 pages, 3408 KiB  
Article
Assessing Spatial Limits of Sentinel-2 Data on Arable Crops in the Context of Checks by Monitoring
by Blanka Vajsová, Dominique Fasbender, Csaba Wirnhardt, Slavko Lemajic and Wim Devos
Remote Sens. 2020, 12(14), 2195; https://doi.org/10.3390/rs12142195 - 09 Jul 2020
Cited by 23 | Viewed by 3655
Abstract
The availability of large amounts of Sentinel-2 data has been a trigger for its increasing exploitation in various types of applications. It is, therefore, of importance to understand the limits above which these data still guarantee a meaningful outcome. This paper proposes a [...] Read more.
The availability of large amounts of Sentinel-2 data has been a trigger for its increasing exploitation in various types of applications. It is, therefore, of importance to understand the limits above which these data still guarantee a meaningful outcome. This paper proposes a new method to quantify and specify restrictions of the Sentinel-2 imagery in the context of checks by monitoring, a newly introduced control approach within the European Common Agriculture Policy framework. The method consists of a comparison of normalized difference vegetation index (NDVI) time series constructed from data of different spatial resolution to estimate the performance and limits of the coarser one. Using similarity assessment of Sentinel-2 (10 m pixel size) and PlanetScope (3 m pixel size) NDVI time series, it was estimated that for 10% out of 867 fields less than 0.5 ha in size, Sentinel-2 data did not provide reliable evidence of the activity or state of the agriculture field over a given timeframe. Statistical analysis revealed that the number of clean or full pixels and the proportion of pixels lost after an application of a 5-m (1/2 pixel) negative buffer are the geospatial parameters of the field that have the highest influence on the ability of the Sentinel-2 data to qualify the field’s state in time. We specified the following limiting criteria: at least 8 full pixels inside a border and less than 60% of pixels lost. It was concluded that compliance with the criteria still assures a high level of extracted information reliability. Our research proved the promising potential, which was higher than anticipated, of Sentinel-2 data for the continuous state assessment of small fields. The method could be applied to other sensors and indicators. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Graphical abstract

20 pages, 6883 KiB  
Article
Winter Wheat Mapping Based on Sentinel-2 Data in Heterogeneous Planting Conditions
by Dongyan Zhang, Shengmei Fang, Bao She, Huihui Zhang, Ning Jin, Haoming Xia, Yuying Yang and Yang Ding
Remote Sens. 2019, 11(22), 2647; https://doi.org/10.3390/rs11222647 - 13 Nov 2019
Cited by 15 | Viewed by 4162
Abstract
Monitoring and mapping the spatial distribution of winter wheat accurately is important for crop management, damage assessment and yield prediction. In this study, northern and central Anhui province were selected as study areas, and Sentinel-2 imagery was employed to map winter wheat distribution [...] Read more.
Monitoring and mapping the spatial distribution of winter wheat accurately is important for crop management, damage assessment and yield prediction. In this study, northern and central Anhui province were selected as study areas, and Sentinel-2 imagery was employed to map winter wheat distribution and the results were verified with Planet imagery in the 2017–2018 growing season. The Sentinel-2 imagery at the heading stage was identified as the optimum period for winter wheat area extraction after analyzing the images from different growth stages using the Jeffries–Matusita distance method. Therefore, ten spectral bands, seven vegetation indices (VI), water index and building index generated from the image at the heading stage were used to classify winter wheat areas by a random forest (RF) algorithm. The result showed that the accuracy was from 93% to 97%, with a Kappa above 0.82 and a percentage error lower than 5% in northern Anhui, and an accuracy of about 80% with Kappa ranging from 0.70 to 0.78 and a percentage error of about 20% in central Anhui. Northern Anhui has a large planting scale of winter wheat and flat terrain while central Anhui grows relatively small winter wheat areas and a high degree of surface fragmentation, which makes the extraction effect in central Anhui inferior to that in northern Anhui. Further, an optimum subset data was obtained from VIs, water index, building index and spectral bands using an RF algorithm. The result of using the optimum subset data showed a high accuracy of classification with a great advantage in data volume and processing time. This study provides a perspective for winter wheat mapping under various climatic and complicated land surface conditions and is of great significance for crop monitoring and agricultural decision-making. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Graphical abstract

25 pages, 11056 KiB  
Article
Validation of Copernicus Sentinel-2 Cloud Masks Obtained from MAJA, Sen2Cor, and FMask Processors Using Reference Cloud Masks Generated with a Supervised Active Learning Procedure
by Louis Baetens, Camille Desjardins and Olivier Hagolle
Remote Sens. 2019, 11(4), 433; https://doi.org/10.3390/rs11040433 - 20 Feb 2019
Cited by 159 | Viewed by 17822
Abstract
The Sentinel-2 satellite mission, developed by the European Space Agency (ESA) for the Copernicus program of the European Union, provides repetitive multi-spectral observations of all Earth land surfaces at a high resolution. The Level 2A product is a basic product requested by many [...] Read more.
The Sentinel-2 satellite mission, developed by the European Space Agency (ESA) for the Copernicus program of the European Union, provides repetitive multi-spectral observations of all Earth land surfaces at a high resolution. The Level 2A product is a basic product requested by many Sentinel-2 users: it provides surface reflectance after atmospheric correction, with a cloud and cloud shadow mask. The cloud/shadow mask is a key element to enable an automatic processing of Sentinel-2 data, and therefore, its performances must be accurately validated. To validate the Sentinel-2 operational Level 2A cloud mask, a software program named Active Learning Cloud Detection (ALCD) was developed, to produce reference cloud masks. Active learning methods allow reducing the number of necessary training samples by iteratively selecting them where the confidence of the classifier is low in the previous iterations. The ALCD method was designed to minimize human operator time thanks to a manually-supervised active learning method. The trained classifier uses a combination of spectral and multi-temporal information as input features and produces fully-classified images. The ALCD method was validated using visual criteria, consistency checks, and compared to another manually-generated cloud masks, with an overall accuracy above 98%. ALCD was used to create 32 reference cloud masks, on 10 different sites, with different seasons and cloud cover types. These masks were used to validate the cloud and shadow masks produced by three Sentinel-2 Level 2A processors: MAJA, used by the French Space Agency (CNES) to deliver Level 2A products, Sen2Cor, used by the European Space Agency (ESA), and FMask, used by the United States Geological Survey (USGS). The results show that MAJA and FMask perform similarly, with an overall accuracy around 90% (91% for MAJA, 90% for FMask), while Sen2Cor’s overall accuracy is 84%. The reference cloud masks, as well as the ALCD software used to generate them are made available to the Sentinel-2 user community. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Graphical abstract

20 pages, 54149 KiB  
Article
Assessment of Sentinel-2 MSI Spectral Band Reflectances for Estimating Fractional Vegetation Cover
by Bing Wang, Kun Jia, Shunlin Liang, Xianhong Xie, Xiangqin Wei, Xiang Zhao, Yunjun Yao and Xiaotong Zhang
Remote Sens. 2018, 10(12), 1927; https://doi.org/10.3390/rs10121927 - 30 Nov 2018
Cited by 53 | Viewed by 9164
Abstract
Fractional vegetation cover (FVC) is an essential parameter for characterizing the land surface vegetation conditions and plays an important role in earth surface process simulations and global change studies. The Sentinel-2 missions carrying multi-spectral instrument (MSI) sensors with 13 multispectral bands are potentially [...] Read more.
Fractional vegetation cover (FVC) is an essential parameter for characterizing the land surface vegetation conditions and plays an important role in earth surface process simulations and global change studies. The Sentinel-2 missions carrying multi-spectral instrument (MSI) sensors with 13 multispectral bands are potentially useful for estimating FVC. However, the performance of these bands for FVC estimation is unclear. Therefore, the objective of this study was to assess the performance of Sentinel-2 MSI spectral band reflectances on FVC estimation. The samples, including the Sentinel-2 MSI canopy reflectances and corresponding FVC values, were simulated using the PROSPECT + SAIL radiative transfer model under different conditions, and random forest regression (RFR) method was then used to develop FVC estimation models and assess the performance of various band reflectances for FVC estimation. These models were finally evaluated using field survey data. The results indicate that the three most important bands of Sentinel-2 MSI data for FVC estimation are band 4 (Red), band 12 (SWIR2) and band 8a (NIR2). FVC estimation using these bands has a comparable accuracy (root mean square error (RMSE) = 0.085) with that using all bands (RMSE = 0.090). The results also demonstrate that band 12 had a better performance for FVC estimation than the green band (RMSE = 0.097). However, the newly added red-edge bands, with low scores in the RFR model, have little significance for improving FVC estimation accuracy compared with the Red, NIR2 and SWIR2 bands. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Figure 1

27 pages, 5307 KiB  
Article
Evaluating the Performance of Sentinel-2, Landsat 8 and Pléiades-1 in Mapping Mangrove Extent and Species
by Dezhi Wang, Bo Wan, Penghua Qiu, Yanjun Su, Qinghua Guo, Run Wang, Fei Sun and Xincai Wu
Remote Sens. 2018, 10(9), 1468; https://doi.org/10.3390/rs10091468 - 14 Sep 2018
Cited by 128 | Viewed by 10189
Abstract
Mapping mangrove extent and species is important for understanding their response to environmental changes and for observing their integrity for providing goods and services. However, accurately mapping mangrove extent and species are ongoing challenges in remote sensing. The newly-launched and freely-available Sentinel-2 (S2) [...] Read more.
Mapping mangrove extent and species is important for understanding their response to environmental changes and for observing their integrity for providing goods and services. However, accurately mapping mangrove extent and species are ongoing challenges in remote sensing. The newly-launched and freely-available Sentinel-2 (S2) sensor offers a new opportunity for these challenges. This study presents the first study dedicated to the examination of the potential of original bands, spectral indices, and texture information of S2 in mapping mangrove extent and species in the first National Nature Reserve for mangroves in Dongzhaigang, China. To map mangrove extent and species, a three-level hierarchical structure based on the spatial structure of a mangrove ecosystem and geographic object-based image analysis is utilized and modified. During the experiments, to conquer the challenge of optimizing high-dimension and correlated feature space, the recursive feature elimination (RFE) algorithm is introduced. Finally, the selected features from RFE are employed in mangrove species discriminations, based on a random forest algorithm. The results are compared with those of Landsat 8 (L8) and Pléiades-1 (P1) data and show that S2 and L8 could accurately extract mangrove extent, but P1 obviously overestimated it. Regarding mangrove species community levels, the overall classification accuracy of S2 is 70.95%, which is lower than P1 imagery (78.57%) and slightly higher than L8 data (68.57%). Meanwhile, the former difference is statistically significant, and the latter is not. The dominant species is extracted basically in S2 and P1 imagery, but for the occasionally distributed K. candel and the pioneer and fringe mangrove A. marina, S2 performs poorly. Concerning L8, S2, and P1, there are eight (8/126), nine (9/218), and eight (8/73) features, respectively, that are the most important for mangrove species discriminations. The most important feature overall is the red-edge bands, followed by shortwave infrared, near infrared, blue, and other visible bands in turn. This study demonstrates that the S2 sensor can accurately map mangrove extent and basically discriminate mangrove species communities, but for the latter, one should be cautious due to the complexity of mangrove species. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Graphical abstract

22 pages, 12316 KiB  
Article
Lithological Classification Using Sentinel-2A Data in the Shibanjing Ophiolite Complex in Inner Mongolia, China
by Wenyan Ge, Qiuming Cheng, Yunwei Tang, Linhai Jing and Chunsheng Gao
Remote Sens. 2018, 10(4), 638; https://doi.org/10.3390/rs10040638 - 20 Apr 2018
Cited by 72 | Viewed by 10107
Abstract
As a source of data continuity between Landsat and SPOT, Sentinel-2 is an Earth observation mission developed by the European Space Agency (ESA), which acquires 13 bands in the visible and near-infrared (VNIR) to shortwave infrared (SWIR) range. In this study, a Sentinel-2A [...] Read more.
As a source of data continuity between Landsat and SPOT, Sentinel-2 is an Earth observation mission developed by the European Space Agency (ESA), which acquires 13 bands in the visible and near-infrared (VNIR) to shortwave infrared (SWIR) range. In this study, a Sentinel-2A imager was utilized to assess its ability to perform lithological classification in the Shibanjing ophiolite complex in Inner Mongolia, China. Five conventional machine learning methods, including artificial neural network (ANN), k-nearest neighbor (k-NN), maximum likelihood classification (MLC), random forest classifier (RFC), and support vector machine (SVM), were compared in order to find an optimal classifier for lithological mapping. The experiment revealed that the MLC method offered the highest overall accuracy. After that, Sentinel-2A image was compared with common multispectral data ASTER and Landsat-8 OLI (operational land imager) for lithological mapping using the MLC method. The comparison results showed that the Sentinel-2A imagery yielded a classification accuracy of 74.5%, which was 2.5% and 5.08% higher than those of the ASTER and OLI imagery, respectively, indicating that Sentinel-2A imagery is adequate for lithological discrimination, due to its high spectral resolution in the VNIR to SWIR range. Moreover, different data combinations of Sentinel-2A + ASTER + DEM (digital elevation model) and OLI + ASTER + DEM data were tested on lithological mapping using the MLC method. The best mapping result was obtained from Sentinel-2A + ASTER + DEM dataset, demonstrating that OLI can be replaced by Sentinel-2A, which, when combined with ASTER, can achieve sufficient bandpasses for lithological classification. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Graphical abstract

15 pages, 2857 KiB  
Article
Explaining Leaf Nitrogen Distribution in a Semi-Arid Environment Predicted on Sentinel-2 Imagery Using a Field Spectroscopy Derived Model
by Abel Ramoelo and Moses Azong Cho
Remote Sens. 2018, 10(2), 269; https://doi.org/10.3390/rs10020269 - 09 Feb 2018
Cited by 27 | Viewed by 5969
Abstract
Leaf nitrogen concentration (leaf N, %) is an essential component for understanding biogeochemical cycling. Leaf N is a good indicator of grass or forage quality, which is important for understanding the movements and feeding patterns of herbivores. Leaf N can be used as [...] Read more.
Leaf nitrogen concentration (leaf N, %) is an essential component for understanding biogeochemical cycling. Leaf N is a good indicator of grass or forage quality, which is important for understanding the movements and feeding patterns of herbivores. Leaf N can be used as input for rangeland carrying capacity and stocking rate models. The estimation of leaf N has been successful using hyperspectral and commercial high spatial resolution satellite data such as WorldView-2 and RapidEye. Empirical methods have been used successfully to estimate leaf N, on the basis that it correlates with leaf chlorophyll. As such, leaf N was estimated using red edge based indices. The new Sentinel-2 sensor has two red edge bands, is freely available, and could further improve the estimation of leaf N at a regional scale. The objective of this study is to develop red edge based Sentinel-2 models derived from an analytical spectral device (ASD) spectrometer to map and monitor leaf N using Sentinel-2 images. Field work for leaf N and ASD data were collected in 2014 (December) in and around Kruger National Park, South Africa. ASD data were resampled to the Sentinel-2 spectral configuration using the spectral response function. The Sentinel-2 data for various dates were acquired from the European Space Agency (ESA) portal. The Sentinel-2 atmospheric correction (Sen2Cor) process was implemented. Simple empirical regression was used to estimate leaf N. High leaf N prediction accuracy was achieved at the ASD level and the best model was inverted on Sentinel-2 images to explain leaf N distribution at a regional scale over time. The spatial distribution of leaf N is influenced by the underlying geological substrate, fire frequency and other environmental variables. This study is a demonstration of how ASD data can be used to calibrate Sentinel-2 for leaf N estimation and mapping. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Graphical abstract

30167 KiB  
Article
Copernicus Sentinel-2A Calibration and Products Validation Status
by Ferran Gascon, Catherine Bouzinac, Olivier Thépaut, Mathieu Jung, Benjamin Francesconi, Jérôme Louis, Vincent Lonjou, Bruno Lafrance, Stéphane Massera, Angélique Gaudel-Vacaresse, Florie Languille, Bahjat Alhammoud, Françoise Viallefont, Bringfried Pflug, Jakub Bieniarz, Sébastien Clerc, Laëtitia Pessiot, Thierry Trémas, Enrico Cadau, Roberto De Bonis, Claudia Isola, Philippe Martimort and Valérie Fernandezadd Show full author list remove Hide full author list
Remote Sens. 2017, 9(6), 584; https://doi.org/10.3390/rs9060584 - 10 Jun 2017
Cited by 369 | Viewed by 31769
Abstract
As part of the Copernicus programme of the European Commission (EC), the European Space Agency (ESA) has developed and is currently operating the Sentinel-2 mission that is acquiring high spatial resolution optical imagery. This article provides a description of the calibration activities and [...] Read more.
As part of the Copernicus programme of the European Commission (EC), the European Space Agency (ESA) has developed and is currently operating the Sentinel-2 mission that is acquiring high spatial resolution optical imagery. This article provides a description of the calibration activities and the status of the mission products validation activities after one year in orbit. Measured performances, from the validation activities, cover both Top-Of-Atmosphere (TOA) and Bottom-Of-Atmosphere (BOA) products. The presented results show the good quality of the mission products both in terms of radiometry and geometry and provide an overview on next mission steps related to data quality aspects. Full article
Show Figures

Figure 1

8295 KiB  
Article
Assessing the Potential of Sentinel-2 and Pléiades Data for the Detection of Prosopis and Vachellia spp. in Kenya
by Wai-Tim Ng, Purity Rima, Kathrin Einzmann, Markus Immitzer, Clement Atzberger and Sandra Eckert
Remote Sens. 2017, 9(1), 74; https://doi.org/10.3390/rs9010074 - 16 Jan 2017
Cited by 79 | Viewed by 12560
Abstract
Prosopis was introduced to Baringo, Kenya in the early 1980s for provision of fuelwood and for controlling desertification through the Fuelwood Afforestation Extension Project (FAEP). Since then, Prosopis has hybridized and spread throughout the region. Prosopis has negative ecological impacts on biodiversity and [...] Read more.
Prosopis was introduced to Baringo, Kenya in the early 1980s for provision of fuelwood and for controlling desertification through the Fuelwood Afforestation Extension Project (FAEP). Since then, Prosopis has hybridized and spread throughout the region. Prosopis has negative ecological impacts on biodiversity and socio-economic effects on livelihoods. Vachellia tortilis, on the other hand, is the dominant indigenous tree species in Baringo and is an important natural resource, mostly preferred for wood, fodder and charcoal production. High utilization due to anthropogenic pressure is affecting the Vachellia populations, whereas the well adapted Prosopis—competing for nutrients and water—has the potential to replace the native Vachellia vegetation. It is vital that both species are mapped in detail to inform stakeholders and for designing management strategies for controlling the Prosopis invasion. For the Baringo area, few remote sensing studies have been carried out. We propose a detailed and robust object-based Random Forest (RF) classification on high spatial resolution Sentinel-2 (ten meter) and Pléiades (two meter) data to detect Prosopis and Vachellia spp. for Marigat sub-county, Baringo, Kenya. In situ reference data were collected to train a RF classifier. Classification results were validated by comparing the outputs to independent reference data of test sites from the “Woody Weeds” project and the Out-Of-Bag (OOB) confusion matrix generated in RF. Our results indicate that both datasets are suitable for object-based Prosopis and Vachellia classification. Higher accuracies were obtained by using the higher spatial resolution Pléiades data (OOB accuracy 0.83 and independent reference accuracy 0.87–0.91) compared to the Sentinel-2 data (OOB accuracy 0.79 and independent reference accuracy 0.80–0.96). We conclude that it is possible to separate Prosopis and Vachellia with good accuracy using the Random Forest classifier. Given the cost of Pléiades, the free of charge Sentinel-2 data provide a viable alternative as the increased spectral resolution compensates for the lack of spatial resolution. With global revisit times of five days from next year onwards, Sentinel-2 based classifications can probably be further improved by using temporal information in addition to the spectral signatures. Full article
Show Figures

Graphical abstract

2156 KiB  
Article
A Direct and Fast Methodology for Ship Recognition in Sentinel-2 Multispectral Imagery
by Henning Heiselberg
Remote Sens. 2016, 8(12), 1033; https://doi.org/10.3390/rs8121033 - 19 Dec 2016
Cited by 40 | Viewed by 6850
Abstract
The European Space Agency satellite Sentinel-2 provides multispectral images with pixel sizes down to 10 m. This high resolution allows for ship detection and recognition by determining a number of important ship parameters. We are able to show how a ship position, its [...] Read more.
The European Space Agency satellite Sentinel-2 provides multispectral images with pixel sizes down to 10 m. This high resolution allows for ship detection and recognition by determining a number of important ship parameters. We are able to show how a ship position, its heading, length and breadth can be determined down to a subpixel resolution. If the ship is moving, its velocity can also be determined from its Kelvin waves. The 13 spectrally different visual and infrared images taken using multispectral imagery (MSI) are “fingerprints” that allow for the recognition and identification of ships. Furthermore, the multispectral image profiles along the ship allow for discrimination between the ship, its turbulent wakes, and the Kelvin waves, such that the ship’s length and breadth can be determined more accurately even when sailing. The ship’s parameters are determined by using satellite imagery taken from several ships, which are then compared to known values from the automatic identification system. The agreement is on the order of the pixel resolution or better. Full article
Show Figures

Graphical abstract

33013 KiB  
Article
The Potential of Sentinel Satellites for Burnt Area Mapping and Monitoring in the Congo Basin Forests
by Astrid Verhegghen, Hugh Eva, Guido Ceccherini, Frederic Achard, Valery Gond, Sylvie Gourlet-Fleury and Paolo Omar Cerutti
Remote Sens. 2016, 8(12), 986; https://doi.org/10.3390/rs8120986 - 30 Nov 2016
Cited by 126 | Viewed by 16401
Abstract
In this study, the recently launched Sentinel-2 (S2) optical satellite and the active radar Sentinel-1 (S1) satellite supported by active fire data from the MODIS sensor were used to detect and monitor forest fires in the Congo Basin. In the context of a [...] Read more.
In this study, the recently launched Sentinel-2 (S2) optical satellite and the active radar Sentinel-1 (S1) satellite supported by active fire data from the MODIS sensor were used to detect and monitor forest fires in the Congo Basin. In the context of a very strong El Niño event, an unprecedented outbreak of fires was observed during the first months of 2016 in open forests formations in the north of the Republic of Congo. The anomalies of the recent fires and meteorological situation compared to historical data show the severity of the drought. Burnt areas mapped by the S1 SAR and S2 Multi Spectral Instrument (MSI) sensors highlight that the fires occurred mainly in Marantaceae forests, characterized by open tree canopy cover and an extensive tall herbaceous layer. The maps show that the origin of the fires correlates with accessibility to the forest, suggesting an anthropogenic origin. The combined use of the two independent and fundamentally different satellite systems of S2 and S1 captured an extent of 36,000 ha of burnt areas, with each sensor compensating for the weakness (cloud perturbations for S2, and sensitivity to ground moisture for S1) of the other. Full article
Show Figures

Graphical abstract

8981 KiB  
Article
Water Constituents and Water Depth Retrieval from Sentinel-2A—A First Evaluation in an Oligotrophic Lake
by Katja Dörnhöfer, Anna Göritz, Peter Gege, Bringfried Pflug and Natascha Oppelt
Remote Sens. 2016, 8(11), 941; https://doi.org/10.3390/rs8110941 - 11 Nov 2016
Cited by 97 | Viewed by 11148
Abstract
Satellite remote sensing may assist in meeting the needs of lake monitoring. In this study, we aim to evaluate the potential of Sentinel-2 to assess and monitor water constituents and bottom characteristics of lakes at spatio-temporal synoptic scales. In a field campaign at [...] Read more.
Satellite remote sensing may assist in meeting the needs of lake monitoring. In this study, we aim to evaluate the potential of Sentinel-2 to assess and monitor water constituents and bottom characteristics of lakes at spatio-temporal synoptic scales. In a field campaign at Lake Starnberg, Germany, we collected validation data concurrently to a Sentinel-2A (S2-A) overpass. We compared the results of three different atmospheric corrections, i.e., Sen2Cor, ACOLITE and MIP, with in situ reflectance measurements, whereof MIP performed best (r = 0.987, RMSE = 0.002 sr−1). Using the bio-optical modelling tool WASI-2D, we retrieved absorption by coloured dissolved organic matter (aCDOM(440)), backscattering and concentration of suspended particulate matter (SPM) in optically deep water; water depths, bottom substrates and aCDOM(440) were modelled in optically shallow water. In deep water, SPM and aCDOM(440) showed reasonable spatial patterns. Comparisons with in situ data (mean: 0.43 m−1) showed an underestimation of S2-A derived aCDOM(440) (mean: 0.14 m−1); S2-A backscattering of SPM was slightly higher than backscattering from in situ data (mean: 0.027 m−1 vs. 0.019 m−1). Chlorophyll-a concentrations (~1 mg·m−3) of the lake were too low for a retrieval. In shallow water, retrieved water depths exhibited a high correlation with echo sounding data (r = 0.95, residual standard deviation = 0.12 m) up to 2.5 m (Secchi disk depth: 4.2 m), though water depths were slightly underestimated (RMSE = 0.56 m). In deeper water, Sentinel-2A bands were incapable of allowing a WASI-2D based separation of macrophytes and sediment which led to erroneous water depths. Overall, the results encourage further research on lakes with varying optical properties and trophic states with Sentinel-2A. Full article
Show Figures

Graphical abstract

6459 KiB  
Article
Sentinel-2A MSI and Landsat 8 OLI Provide Data Continuity for Geological Remote Sensing
by Harald Van der Werff and Freek Van der Meer
Remote Sens. 2016, 8(11), 883; https://doi.org/10.3390/rs8110883 - 25 Oct 2016
Cited by 139 | Viewed by 19034
Abstract
Sentinel-2A MSI is the Landsat-like spatial resolution (10–60 m) super-spectral instrument of the European Space Agency (ESA), aimed at additional data continuity for global land surface monitoring with Landsat and Satellite Pour l’Observation de la Terre (SPOT) missions. Several simulation studies have been [...] Read more.
Sentinel-2A MSI is the Landsat-like spatial resolution (10–60 m) super-spectral instrument of the European Space Agency (ESA), aimed at additional data continuity for global land surface monitoring with Landsat and Satellite Pour l’Observation de la Terre (SPOT) missions. Several simulation studies have been conducted in the last several years to show the potential of Sentinel-2A MSI (MultiSpectral Instrument). Now that real data are available, the first confirmations of this potential and comparisons with other operational systems are being made. This paper aims at evaluating Sentinel-2A MSI band ratio products that are relevant for geological remote sensing. A Sentinel-2A MSI and a Landsat 8 OLI (Operational Land Imager) scene were processed from their respective levels L1C and L1T to level L2A (bottom of atmosphere reflectance). Then, three band ratios originally defined for Landsat TM (Thematic Mapper) were used to map mineralogy associated with a hydrothermal alteration system in southeast Spain. The results obtained with Sentinel-2A MSI were compared with those obtained with Landsat 8 OLI and a simulated Sentinel-2A MSI dataset that was used before actual data were released. Results show that the images appear similar to the human eye having a correlation of approximately 0.8 and higher, but that the associated data ranges differ significantly. The resulting products are also compared to a published geologic map of the study area, and it is shown that the resulting maps correspond with the conceptual geologic model of the epithermal deposit. Full article
Show Figures

Graphical abstract

4410 KiB  
Article
Ready-to-Use Methods for the Detection of Clouds, Cirrus, Snow, Shadow, Water and Clear Sky Pixels in Sentinel-2 MSI Images
by André Hollstein, Karl Segl, Luis Guanter, Maximilian Brell and Marta Enesco
Remote Sens. 2016, 8(8), 666; https://doi.org/10.3390/rs8080666 - 18 Aug 2016
Cited by 142 | Viewed by 25086
Abstract
Classification of clouds, cirrus, snow, shadows and clear sky areas is a crucial step in the pre-processing of optical remote sensing images and is a valuable input for their atmospheric correction. The Multi-Spectral Imager on board the Sentinel-2’s of the Copernicus program offers [...] Read more.
Classification of clouds, cirrus, snow, shadows and clear sky areas is a crucial step in the pre-processing of optical remote sensing images and is a valuable input for their atmospheric correction. The Multi-Spectral Imager on board the Sentinel-2’s of the Copernicus program offers optimized bands for this task and delivers unprecedented amounts of data regarding spatial sampling, global coverage, spectral coverage, and repetition rate. Efficient algorithms are needed to process, or possibly reprocess, those big amounts of data. Techniques based on top-of-atmosphere reflectance spectra for single-pixels without exploitation of external data or spatial context offer the largest potential for parallel data processing and highly optimized processing throughput. Such algorithms can be seen as a baseline for possible trade-offs in processing performance when the application of more sophisticated methods is discussed. We present several ready-to-use classification algorithms which are all based on a publicly available database of manually classified Sentinel-2A images. These algorithms are based on commonly used and newly developed machine learning techniques which drastically reduce the amount of time needed to update the algorithms when new images are added to the database. Several ready-to-use decision trees are presented which allow to correctly label about 91 % of the spectra within a validation dataset. While decision trees are simple to implement and easy to understand, they offer only limited classification skill. It improves to 98 % when the presented algorithm based on the classical Bayesian method is applied. This method has only recently been used for this task and shows excellent performance concerning classification skill and processing performance. A comparison of the presented algorithms with other commonly used techniques such as random forests, stochastic gradient descent, or support vector machines is also given. Especially random forests and support vector machines show similar classification skill as the classical Bayesian method. Full article
Show Figures

Graphical abstract

1745 KiB  
Article
First Experiences in Mapping Lake Water Quality Parameters with Sentinel-2 MSI Imagery
by Kaire Toming, Tiit Kutser, Alo Laas, Margot Sepp, Birgot Paavel and Tiina Nõges
Remote Sens. 2016, 8(8), 640; https://doi.org/10.3390/rs8080640 - 05 Aug 2016
Cited by 348 | Viewed by 23248
Abstract
The importance of lakes and reservoirs leads to the high need for monitoring lake water quality both at local and global scales. The aim of the study was to test suitability of Sentinel-2 Multispectral Imager’s (MSI) data for mapping different lake water quality [...] Read more.
The importance of lakes and reservoirs leads to the high need for monitoring lake water quality both at local and global scales. The aim of the study was to test suitability of Sentinel-2 Multispectral Imager’s (MSI) data for mapping different lake water quality parameters. In situ data of chlorophyll a (Chl a), water color, colored dissolved organic matter (CDOM) and dissolved organic carbon (DOC) from nine small and two large lakes were compared with band ratio algorithms derived from Sentinel-2 Level-1C and atmospherically corrected (Sen2cor) Level-2A images. The height of the 705 nm peak was used for estimating Chl a. The suitability of the commonly used green to red band ratio was tested for estimating the CDOM, DOC and water color. Concurrent reflectance measurements were not available. Therefore, we were not able to validate the performance of Sen2cor atmospheric correction available in the Sentinel-2 Toolbox. The shape and magnitude of water reflectance were consistent with our field measurements from previous years. However, the atmospheric correction reduced the correlation between the band ratio algorithms and water quality parameters indicating the need in better atmospheric correction. We were able to show that there is good correlation between band ratio algorithms calculated from Sentinel-2 MSI data and lake water parameters like Chl a (R2 = 0.83), CDOM (R2 = 0.72) and DOC (R2 = 0.92) concentrations as well as water color (R2 = 0.52). The in situ dataset was limited in number, but covered a reasonably wide range of optical water properties. These preliminary results allow us to assume that Sentinel-2 will be a valuable tool for lake monitoring and research, especially taking into account that the data will be available routinely for many years, the imagery will be frequent, and free of charge. Full article
Show Figures

Graphical abstract

46461 KiB  
Article
Monitoring Urban Areas with Sentinel-2A Data: Application to the Update of the Copernicus High Resolution Layer Imperviousness Degree
by Antoine Lefebvre, Christophe Sannier and Thomas Corpetti
Remote Sens. 2016, 8(7), 606; https://doi.org/10.3390/rs8070606 - 19 Jul 2016
Cited by 114 | Viewed by 18665
Abstract
Monitoring with high resolution land cover and especially of urban areas is a key task that is more and more required in a number of applications (urban planning, health monitoring, ecology, etc.). At the moment, some operational products, such as the “Copernicus High [...] Read more.
Monitoring with high resolution land cover and especially of urban areas is a key task that is more and more required in a number of applications (urban planning, health monitoring, ecology, etc.). At the moment, some operational products, such as the “Copernicus High Resolution Imperviousness Layer”, are available to assess this information, but the frequency of updates is still limited despite the fact that more and more very high resolution data are acquired. In particular, the recent launch of the Sentinel-2A satellite in June 2015 makes available data with a minimum spatial resolution of 10 m, 13 spectral bands, wide acquisition coverage and short time revisits, which opens a large scale of new applications. In this work, we propose to exploit the benefit of Sentinel-2 images to monitor urban areas and to update Copernicus Land services, in particular the High Resolution Layer imperviousness. The approach relies on independent image classification (using already available Landsat images and new Sentinel-2 images) that are fused using the Dempster–Shafer theory. Experiments are performed on two urban areas: a large European city, Prague, in the Czech Republic, and a mid-sized one, Rennes, in France. Results, validated with a Kappa index over 0.9, illustrate the great interest of Sentinel-2 in operational projects, such as Copernicus products, and since such an approach can be conducted on very large areas, such as the European or global scale. Though classification and data fusion are not new, our process is original in the way it optimally combines uncertainties issued from classifications to generate more confident and precise imperviousness maps. The choice of imperviousness comes from the fact that it is a typical application where research meets the needs of an operational production. Moreover, the methodology presented in this paper can be used in any other land cover classification task using regular acquisitions issued, for example, from Sentinel-2. Full article
Show Figures

Graphical abstract

21980 KiB  
Article
Glacier Remote Sensing Using Sentinel-2. Part I: Radiometric and Geometric Performance, and Application to Ice Velocity
by Andreas Kääb, Solveig H. Winsvold, Bas Altena, Christopher Nuth, Thomas Nagler and Jan Wuite
Remote Sens. 2016, 8(7), 598; https://doi.org/10.3390/rs8070598 - 15 Jul 2016
Cited by 124 | Viewed by 17795
Abstract
With its temporal resolution of 10 days (five days with two satellites, and significantly more at high latitudes), its swath width of 290 km, and its 10 m and 20 m spatial resolution bands from the visible to the shortwave infrared, the European [...] Read more.
With its temporal resolution of 10 days (five days with two satellites, and significantly more at high latitudes), its swath width of 290 km, and its 10 m and 20 m spatial resolution bands from the visible to the shortwave infrared, the European Sentinel-2 satellites have significant potential for glacier remote sensing, in particular mapping of glacier outlines and facies, and velocity measurements. Testing Level 1C commissioning and ramp-up phase data for initial sensor quality experiences, we find a high radiometric performance, but with slight striping effects under certain conditions. Through co-registration of repeat Sentinal-2 data we also find lateral offset patterns and noise on the order of a few metres. Neither of these issues will complicate most typical glaciological applications. Absolute geo-location of the data investigated was on the order of one pixel at the time of writing. The most severe geometric problem stems from vertical errors of the DEM used for ortho-rectifying Sentinel-2 data. These errors propagate into locally varying lateral offsets in the images, up to several pixels with respect to other georeferenced data, or between Sentinel-2 data from different orbits. Finally, we characterize the potential and limitations of tracking glacier flow from repeat Sentinel-2 data using a set of typical glaciers in different environments: Aletsch Glacier, Swiss Alps; Fox Glacier, New Zealand; Jakobshavn Isbree, Greenland; Antarctic Peninsula at the Larsen C ice shelf. Full article
Show Figures

Graphical abstract

8191 KiB  
Article
Glacier Remote Sensing Using Sentinel-2. Part II: Mapping Glacier Extents and Surface Facies, and Comparison to Landsat 8
by Frank Paul, Solveig H. Winsvold, Andreas Kääb, Thomas Nagler and Gabriele Schwaizer
Remote Sens. 2016, 8(7), 575; https://doi.org/10.3390/rs8070575 - 07 Jul 2016
Cited by 140 | Viewed by 20910
Abstract
Mapping of glacier extents from automated classification of optical satellite images has become a major application of the freely available images from Landsat. A widely applied method is based on segmented ratio images from a red and shortwave infrared band. With the now [...] Read more.
Mapping of glacier extents from automated classification of optical satellite images has become a major application of the freely available images from Landsat. A widely applied method is based on segmented ratio images from a red and shortwave infrared band. With the now available data from Sentinel-2 (S2) and Landsat 8 (L8) there is high potential to further extend the existing time series (starting with Landsat 4/5 in 1982) and to considerably improve over previous capabilities, thanks to increased spatial resolution and dynamic range, a wider swath width and more frequent coverage. Here, we test and compare a variety of previously used methods to map glacier extents from S2 and L8, and investigate the mapping of snow facies with S2 using top of atmosphere reflectance. Our results confirm that the band ratio method works well with S2 and L8. The 15 m panchromatic band of L8 can be used instead of the red band, resulting in glacier extents similar to S2 (0.7% larger for 155 glaciers). On the other hand, extents derived from the 30 m bands are 4%–5% larger, indicating a more generous interpretation of mixed pixels. Mapping of snow cover with S2 provided accurate results, but the required topographic correction would benefit from a better orthorectification with a more precise DEM than currently used. Full article
Show Figures

Graphical abstract

11555 KiB  
Article
An Automated Approach for Sub-Pixel Registration of Landsat-8 Operational Land Imager (OLI) and Sentinel-2 Multi Spectral Instrument (MSI) Imagery
by Lin Yan, David P. Roy, Hankui Zhang, Jian Li and Haiyan Huang
Remote Sens. 2016, 8(6), 520; https://doi.org/10.3390/rs8060520 - 21 Jun 2016
Cited by 99 | Viewed by 14125
Abstract
Moderate spatial resolution satellite data from the Landsat-8 OLI and Sentinel-2A MSI sensors together offer 10 m to 30 m multi-spectral reflective wavelength global coverage, providing the opportunity for improved combined sensor mapping and monitoring of the Earth’s surface. However, the standard geolocated [...] Read more.
Moderate spatial resolution satellite data from the Landsat-8 OLI and Sentinel-2A MSI sensors together offer 10 m to 30 m multi-spectral reflective wavelength global coverage, providing the opportunity for improved combined sensor mapping and monitoring of the Earth’s surface. However, the standard geolocated Landsat-8 OLI L1T and Sentinel-2A MSI L1C data products are currently found to be misaligned. An approach for automated registration of Landsat-8 OLI L1T and Sentinel-2A MSI L1C data is presented and demonstrated using contemporaneous sensor data. The approach is computationally efficient because it implements feature point detection across four image pyramid levels to identify a sparse set of tie-points. Area-based least squares matching around the feature points with mismatch detection across the image pyramid levels is undertaken to provide reliable tie-points. The approach was assessed by examination of extracted tie-point spatial distributions and tie-point mapping transformations (translation, affine and second order polynomial), dense-matching prediction-error assessment, and by visual registration assessment. Two test sites over Cape Town and Limpopo province in South Africa that contained cloud and shadows were selected. A Landsat-8 L1T image and two Sentinel-2A L1C images sensed 16 and 26 days later were registered (Cape Town) to examine the robustness of the algorithm to surface, atmosphere and cloud changes, in addition to the registration of a Landsat-8 L1T and Sentinel-2A L1C image pair sensed 4 days apart (Limpopo province). The automatically extracted tie-points revealed sensor misregistration greater than one 30 m Landsat-8 pixel dimension for the two Cape Town image pairs, and greater than one 10 m Sentinel-2A pixel dimension for the Limpopo image pair. Transformation fitting assessments showed that the misregistration can be effectively characterized by an affine transformation. Hundreds of automatically located tie-points were extracted and had affine-transformation root-mean-square error fits of approximately 0.3 pixels at 10 m resolution and dense-matching prediction errors of similar magnitude. These results and visual assessment of the affine transformed data indicate that the methodology provides sub-pixel registration performance required for meaningful Landsat-8 OLI and Sentinel-2A MSI data comparison and combined data applications. Full article
Show Figures

Graphical abstract

1363 KiB  
Article
Sentinel-2’s Potential for Sub-Pixel Landscape Feature Detection
by Julien Radoux, Guillaume Chomé, Damien Christophe Jacques, François Waldner, Nicolas Bellemans, Nicolas Matton, Céline Lamarche, Raphaël D’Andrimont and Pierre Defourny
Remote Sens. 2016, 8(6), 488; https://doi.org/10.3390/rs8060488 - 09 Jun 2016
Cited by 137 | Viewed by 16703
Abstract
Land cover and land use maps derived from satellite remote sensing imagery are critical to support biodiversity and conservation, especially over large areas. With its 10 m to 20 m spatial resolution, Sentinel-2 is a promising sensor for the detection of a variety [...] Read more.
Land cover and land use maps derived from satellite remote sensing imagery are critical to support biodiversity and conservation, especially over large areas. With its 10 m to 20 m spatial resolution, Sentinel-2 is a promising sensor for the detection of a variety of landscape features of ecological relevance. However, many components of the ecological network are still smaller than the 10 m pixel, i.e., they are sub-pixel targets that stretch the sensor’s resolution to its limit. This paper proposes a framework to empirically estimate the minimum object size for an accurate detection of a set of structuring landscape foreground/background pairs. The developed method combines a spectral separability analysis and an empirical point spread function estimation for Sentinel-2. The same approach was also applied to Landsat-8 and SPOT-5 (Take 5), which can be considered as similar in terms of spectral definition and spatial resolution, respectively. Results show that Sentinel-2 performs consistently on both aspects. A large number of indices have been tested along with the individual spectral bands and target discrimination was possible in all but one case. Overall, results for Sentinel-2 highlight the critical importance of a good compromise between the spatial and spectral resolution. For instance, the Sentinel-2 roads detection limit was of 3 m and small water bodies are separable with a diameter larger than 11 m. In addition, the analysis of spectral mixtures draws attention to the uneven sensitivity of a variety of spectral indices. The proposed framework could be implemented to assess the fitness for purpose of future sensors within a large range of applications. Full article
Show Figures

Graphical abstract

6241 KiB  
Article
Water Bodies’ Mapping from Sentinel-2 Imagery with Modified Normalized Difference Water Index at 10-m Spatial Resolution Produced by Sharpening the SWIR Band
by Yun Du, Yihang Zhang, Feng Ling, Qunming Wang, Wenbo Li and Xiaodong Li
Remote Sens. 2016, 8(4), 354; https://doi.org/10.3390/rs8040354 - 22 Apr 2016
Cited by 528 | Viewed by 48009
Abstract
Monitoring open water bodies accurately is an important and basic application in remote sensing. Various water body mapping approaches have been developed to extract water bodies from multispectral images. The method based on the spectral water index, especially the Modified Normalized Difference Water [...] Read more.
Monitoring open water bodies accurately is an important and basic application in remote sensing. Various water body mapping approaches have been developed to extract water bodies from multispectral images. The method based on the spectral water index, especially the Modified Normalized Difference Water Index (MDNWI) calculated from the green and Shortwave-Infrared (SWIR) bands, is one of the most popular methods. The recently launched Sentinel-2 satellite can provide fine spatial resolution multispectral images. This new dataset is potentially of important significance for regional water bodies’ mapping, due to its free access and frequent revisit capabilities. It is noted that the green and SWIR bands of Sentinel-2 have different spatial resolutions of 10 m and 20 m, respectively. Straightforwardly, MNDWI can be produced from Sentinel-2 at the spatial resolution of 20 m, by upscaling the 10-m green band to 20 m correspondingly. This scheme, however, wastes the detailed information available at the 10-m resolution. In this paper, to take full advantage of the 10-m information provided by Sentinel-2 images, a novel 10-m spatial resolution MNDWI is produced from Sentinel-2 images by downscaling the 20-m resolution SWIR band to 10 m based on pan-sharpening. Four popular pan-sharpening algorithms, including Principle Component Analysis (PCA), Intensity Hue Saturation (IHS), High Pass Filter (HPF) and À Trous Wavelet Transform (ATWT), were applied in this study. The performance of the proposed method was assessed experimentally using a Sentinel-2 image located at the Venice coastland. In the experiment, six water indexes, including 10-m NDWI, 20-m MNDWI and 10-m MNDWI, produced by four pan-sharpening algorithms, were compared. Three levels of results, including the sharpened images, the produced MNDWI images and the finally mapped water bodies, were analysed quantitatively. The results showed that MNDWI can enhance water bodies and suppressbuilt-up features more efficiently than NDWI. Moreover, 10-m MNDWIs produced by all four pan-sharpening algorithms can represent more detailed spatial information of water bodies than 20-m MNDWI produced by the original image. Thus, MNDWIs at the 10-m resolution can extract more accurate water body maps than 10-m NDWI and 20-m MNDWI. In addition, although HPF can produce more accurate sharpened images and MNDWI images than the other three benchmark pan-sharpening algorithms, the ATWT algorithm leads to the best 10-m water bodies mapping results. This is no necessary positive connection between the accuracy of the sharpened MNDWI image and the map-level accuracy of the resultant water body maps. Full article
Show Figures

Graphical abstract

8684 KiB  
Article
Assessment of the Added-Value of Sentinel-2 for Detecting Built-up Areas
by Martino Pesaresi, Christina Corbane, Andreea Julea, Aneta J. Florczyk, Vasileios Syrris and Pierre Soille
Remote Sens. 2016, 8(4), 299; https://doi.org/10.3390/rs8040299 - 01 Apr 2016
Cited by 151 | Viewed by 13563
Abstract
Monitoring of the human-induced changes and the availability of reliable and methodologically consistent urban area maps are essential to support sustainable urban development on a global scale. The Global Human Settlement Layer (GHSL) is a project funded by the European Commission, Joint Research [...] Read more.
Monitoring of the human-induced changes and the availability of reliable and methodologically consistent urban area maps are essential to support sustainable urban development on a global scale. The Global Human Settlement Layer (GHSL) is a project funded by the European Commission, Joint Research Centre, which aims at providing scientific methods and systems for reliable and automatic mapping of built-up areas from remote sensing data. In the frame of the GHSL, the opportunities offered by the recent availability of Sentinel-2 data are being explored using a novel image classification method, called Symbolic Machine Learning (SML), for detailed urban land cover mapping. In this paper, a preliminary test was implemented with the purpose of: (i) assessing the applicability of the SML classifier on Sentinel-2 imagery; (ii) evaluating the complementarity of Sentinel-1 and Sentinel-2; and (iii) understanding the added-value of Sentinel-2 with respect to Landsat for improving global high-resolution human settlement mapping. The overall objective is to explore areas of improvement, including the possibility of synergistic use of the different sensors. The results showed that noticeable improvement of the quality of the classification could be gained from the increased spatial detail and from the thematic contents of Sentinel-2 compared to the Landsat derived product as well as from the complementarity between Sentinel-1 and Sentinel-2 images. Full article
Show Figures

Graphical abstract

27170 KiB  
Article
First Experience with Sentinel-2 Data for Crop and Tree Species Classifications in Central Europe
by Markus Immitzer, Francesco Vuolo and Clement Atzberger
Remote Sens. 2016, 8(3), 166; https://doi.org/10.3390/rs8030166 - 23 Feb 2016
Cited by 678 | Viewed by 47993
Abstract
The study presents the preliminary results of two classification exercises assessing the capabilities of pre-operational (August 2015) Sentinel-2 (S2) data for mapping crop types and tree species. In the first case study, an S2 image was used to map six summer crop species [...] Read more.
The study presents the preliminary results of two classification exercises assessing the capabilities of pre-operational (August 2015) Sentinel-2 (S2) data for mapping crop types and tree species. In the first case study, an S2 image was used to map six summer crop species in Lower Austria as well as winter crops/bare soil. Crop type maps are needed to account for crop-specific water use and for agricultural statistics. Crop type information is also useful to parametrize crop growth models for yield estimation, as well as for the retrieval of vegetation biophysical variables using radiative transfer models. The second case study aimed to map seven different deciduous and coniferous tree species in Germany. Detailed information about tree species distribution is important for forest management and to assess potential impacts of climate change. In our S2 data assessment, crop and tree species maps were produced at 10 m spatial resolution by combining the ten S2 spectral channels with 10 and 20 m pixel size. A supervised Random Forest classifier (RF) was deployed and trained with appropriate ground truth. In both case studies, S2 data confirmed its expected capabilities to produce reliable land cover maps. Cross-validated overall accuracies ranged between 65% (tree species) and 76% (crop types). The study confirmed the high value of the red-edge and shortwave infrared (SWIR) bands for vegetation mapping. Also, the blue band was important in both study sites. The S2-bands in the near infrared were amongst the least important channels. The object based image analysis (OBIA) and the classical pixel-based classification achieved comparable results, mainly for the cropland. As only single date acquisitions were available for this study, the full potential of S2 data could not be assessed. In the future, the two twin S2 satellites will offer global coverage every five days and therefore permit to concurrently exploit unprecedented spectral and temporal information with high spatial resolution. Full article
Show Figures

Graphical abstract

Other

Jump to: Research

11 pages, 1367 KiB  
Letter
A Simple Similarity Index for the Comparison of Remotely Sensed Time Series with Scarce Simultaneous Acquisitions
by Dominique Fasbender, Blanka Vajsová, Csaba Wirnhardt and Slavko Lemajic
Remote Sens. 2019, 11(13), 1527; https://doi.org/10.3390/rs11131527 - 27 Jun 2019
Cited by 2 | Viewed by 3034
Abstract
Emergence of new state-of-the-art technologies has enabled an unprecedented amount of high spatial resolution satellite data having great potential for exploitation of extracted time series for a vast range of applications. Despite the high temporal resolution of time series, the number of real [...] Read more.
Emergence of new state-of-the-art technologies has enabled an unprecedented amount of high spatial resolution satellite data having great potential for exploitation of extracted time series for a vast range of applications. Despite the high temporal resolution of time series, the number of real observations of optical data that can be utilized is reduced due to meteorological conditions (such as cloud or haze) prevailing at the time of acquisition. This fact has an effect on the density of the retrieved time series and subsequently on a number of coincidental observations when comparing the similarity of time series from two different data sources for which the simultaneous acquisition date is already scarce. Classical tools for assessing the similarity of such time series can prove to be difficult or even impossible because of a lack of simultaneous observations. In this paper, we propose a simple method in order to circumvent this scarcity issue. In the first step, we rely on an interpolation in order to produce artificial time series on the union of the original acquisition dates. Then, we extend the theory of the correlation coefficient (CC) estimator to these interpolated time series. After validation on synthetic data, this simple approach proved to be extremely efficient on a real case study where Sentinel-2 and PlanetScope NDVI time series on parcels in The Netherlands are compared. Indeed, compared to other methods, it reduced the number of undecided cases while also improving the power of the statistical test on the similarity between both types of time series and the precision of the estimated CC. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Figure 1

17 pages, 5863 KiB  
Technical Note
Comparison of SNAP-Derived Sentinel-2A L2A Product to ESA Product over Europe
by Najib Djamai and Richard Fernandes
Remote Sens. 2018, 10(6), 926; https://doi.org/10.3390/rs10060926 - 12 Jun 2018
Cited by 35 | Viewed by 12574
Abstract
Sentinel-2 is a constellation of two satellites launched by the European Space Agency (ESA), respectively on 23 June 2015 and 7 March 2017, to map geophysical parameters over land surfaces. ESA provides Level 2 bottom-of-atmosphere reflectance (BOA) products (ESA-L2A) for Europe, with plans [...] Read more.
Sentinel-2 is a constellation of two satellites launched by the European Space Agency (ESA), respectively on 23 June 2015 and 7 March 2017, to map geophysical parameters over land surfaces. ESA provides Level 2 bottom-of-atmosphere reflectance (BOA) products (ESA-L2A) for Europe, with plans for operational global coverage, as well as the Sen2Cor (S2C) offline processor. In this study, aerosol optical thickness (AOT), precipitable water vapour (WVP) and surface reflectance from ESA-L2A products are compared with S2C output when using identical input Level 1 radiance products. Additionally, AOT and WVP are validated against reference measurement. As ESA and S2C share the same input and atmospheric correction algorithm, it was hypothesized that they should show identical validation performance and that differences between products should be negligible in comparison to the uncertainty of retrieved geophysical parameters due to radiometric uncertainty alone. Validation and intercomparison was performed for five clear-sky growing season dates for each of three ESA-L2A tiles selected to span a range of vegetation and topography as well as to be close to the AERONET measurement site. Validation of S2C (ESA) products using AERONET site measurements indicated an overall root mean square error (RMSE) of 0.06 (0.07) and a bias of 0.05 (0.09) for AOT and 0.20 cm (0.22 cm) and the bias was −0.02 cm (−0.10 cm) for WVP. Intercomparison of S2C-L2A and ESA-L2A showed an overall agreement higher than 99% for scene classification (SCL) maps and negligible differences for WVP (RMSE under 0.09 and R2 above 0.99). Larger disagreement was observed for aerosol optical thickness (AOT) (RMSE up to 0.04 and R2 as low as 0.14). For BOA reflectance, disagreement between products depends on vegetation cover density, topography slope and spectral band. The largest differences were observed for red-edge and infrared bands in mountainous vegetated areas (RMSE up to 4.9% reflectance and R2 as low as 0.53). These differences are of similar magnitude to the radiometric calibration requirements for the Sentinel 2 imager. The differences had minimal impact of commonly used vegetation indices (NDVI, NDWI, EVI), but application of the Sentinel Level 2 biophysical processor generally resulted in proportional differences in most derived vegetation parameters. It is recommended that the consistency of ESA and S2C products should be improved by the developers of the ESA and S2C processors. Full article
(This article belongs to the Collection Sentinel-2: Science and Applications)
Show Figures

Figure 1

3248 KiB  
Letter
Preliminary Comparison of Sentinel-2 and Landsat 8 Imagery for a Combined Use
by Emanuele Mandanici and Gabriele Bitelli
Remote Sens. 2016, 8(12), 1014; https://doi.org/10.3390/rs8121014 - 11 Dec 2016
Cited by 182 | Viewed by 15015
Abstract
The availability of new generation multispectral sensors of the Landsat 8 and Sentinel-2 satellite platforms offers unprecedented opportunities for long-term high-frequency monitoring applications. The present letter aims at highlighting some potentials and challenges deriving from the spectral and spatial characteristics of the two [...] Read more.
The availability of new generation multispectral sensors of the Landsat 8 and Sentinel-2 satellite platforms offers unprecedented opportunities for long-term high-frequency monitoring applications. The present letter aims at highlighting some potentials and challenges deriving from the spectral and spatial characteristics of the two instruments. Some comparisons between corresponding bands and band combinations were performed on the basis of different datasets: the first consists of a set of simulated images derived from a hyperspectral Hyperion image, the other five consist instead of pairs of real images (Landsat 8 and Sentinel-2A) acquired on the same date, over five areas. Results point out that in most cases the two sensors can be well combined; however, some issues arise regarding near-infrared bands when Sentinel-2 data are combined with both Landsat 8 and older Landsat images. Full article
Show Figures

Graphical abstract

13665 KiB  
Technical Note
Data Service Platform for Sentinel-2 Surface Reflectance and Value-Added Products: System Use and Examples
by Francesco Vuolo, Mateusz Żółtak, Claudia Pipitone, Luca Zappa, Hannah Wenng, Markus Immitzer, Marie Weiss, Frederic Baret and Clement Atzberger
Remote Sens. 2016, 8(11), 938; https://doi.org/10.3390/rs8110938 - 11 Nov 2016
Cited by 136 | Viewed by 17112
Abstract
This technical note presents the first Sentinel-2 data service platform for obtaining atmospherically-corrected images and generating the corresponding value-added products for any land surface on Earth. Using the European Space Agency’s (ESA) Sen2Cor algorithm, the platform processes ESA’s Level-1C top-of-atmosphere reflectance to atmospherically-corrected [...] Read more.
This technical note presents the first Sentinel-2 data service platform for obtaining atmospherically-corrected images and generating the corresponding value-added products for any land surface on Earth. Using the European Space Agency’s (ESA) Sen2Cor algorithm, the platform processes ESA’s Level-1C top-of-atmosphere reflectance to atmospherically-corrected bottom-of-atmosphere (BoA) reflectance (Level-2A). The processing runs on-demand, with a global coverage, on the Earth Observation Data Centre (EODC), which is a public-private collaborative IT infrastructure in Vienna (Austria) for archiving, processing, and distributing Earth observation (EO) data. Using the data service platform, users can submit processing requests and access the results via a user-friendly web page or using a dedicated application programming interface (API). Building on the processed Level-2A data, the platform also creates value-added products with a particular focus on agricultural vegetation monitoring, such as leaf area index (LAI) and broadband hemispherical-directional reflectance factor (HDRF). An analysis of the performance of the data service platform, along with processing capacity, is presented. Some preliminary consistency checks of the algorithm implementation are included to demonstrate the expected product quality. In particular, Sentinel-2 data were compared to atmospherically-corrected Landsat-8 data for six test sites achieving a R2 = 0.90 and Root Mean Square Error (RMSE) = 0.031. LAI was validated for one test site using ground estimations. Results show a very good agreement (R2 = 0.83) and a RMSE of 0.32 m2/m2 (12% of mean value). Full article
Show Figures

Graphical abstract

Back to TopTop