Young Talents in Polymer Science

A special issue of Polymers (ISSN 2073-4360).

Deadline for manuscript submissions: closed (30 September 2016) | Viewed by 77253

Printed Edition Available!
A printed edition of this Special Issue is available here.

Special Issue Editors

Lehrstuhl für Polymermaterialien und Polymertechnologie, University of Potsdam, 14476 Potsdam-Golm, Germany
Interests: self-assembly of block copolymers and nanoparticles; multi-functional patchy particles; Pickering-Emulsions; protein-polymer conjugates; integration of biological functions into polymeric materials
Institute for Chemistry and Technology of Materials, University of Technology Graz, NAWI Graz, 8010 Graz, Austria
Interests: functional polymers; ring-opening polymerizations; crosslinked polymers; biopolyesters; polymeranalogous modifications
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

Polymers aims to compile the current trends and research directions of internationally renowned and successful young polymer scientists in one dedicated Special Issue. The idea for this Special Issue has arisen from the numerous and, above all, brilliant nominations for our 1st Young Investigator Award. It was the easiest-ever choice for us to publicly share the fascinating and thrilling research successes of the nominated scientists with you, our dear peer readers.

For this prestigious Special Issue, the journal Polymers will only accept original research papers that have been invited exclusively by the editors. The contributions to this Special Issue will highlight the current state-of-the-art in the fields of polymerization methods, theory/simulation/modeling, new physical phenomena, advances in characterization techniques, and harnessing of self-assembly and biological strategies for producing complex multifunctional structures.

Please enjoy reading these high-end research highlights!

Prof. Dr. Alexander Böker
Prof. Dr. Frank Wiesbrock
Guest Editors

Submission

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. Papers will be published continuously (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are refereed through a peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Polymers is an international peer-reviewed Open Access monthly journal published by MDPI.

Published Papers (11 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

Jump to: Review

872 KiB  
Communication
Influence of Substituent Chain Branching on the Transfection Efficacy of Cyclopropenium-Based Polymers
by Spencer D. Brucks, Jessica L. Freyer, Tristan H. Lambert and Luis M. Campos
Polymers 2017, 9(3), 79; https://doi.org/10.3390/polym9030079 - 24 Feb 2017
Cited by 12 | Viewed by 6381
Abstract
The realization of gene therapy relies on the development of delivery vectors with high efficiency and biocompatibility. With a multitude of structures accessible, the core challenge is precisely tuning vector structure to probe and optimize structure–property relationships. Employing a modular strategy, two pairs [...] Read more.
The realization of gene therapy relies on the development of delivery vectors with high efficiency and biocompatibility. With a multitude of structures accessible, the core challenge is precisely tuning vector structure to probe and optimize structure–property relationships. Employing a modular strategy, two pairs of cationic polymers based on the trisaminocyclopropenium (TAC) ion were synthesized where the substituents differ in the degree of alkyl chain branching. All TAC-based polymers exhibited higher transfection efficiencies than the untreated controls, with variable in vitro toxicities. Considering both cytotoxicity and transfection efficacy, an optimal nonviral vector was identified. Our studies highlight the importance of exercising precise control over polymer structure, both in terms of backbone identity and substituent nature, and the necessity of a robust, modular platform from which to study them. Full article
(This article belongs to the Special Issue Young Talents in Polymer Science)
Show Figures

Graphical abstract

4917 KiB  
Article
A Comprehensive Systematic Study on Thermoresponsive Gels: Beyond the Common Architectures of Linear Terpolymers
by Anna P. Constantinou, Hanyi Zhao, Catriona M. McGilvery, Alexandra E. Porter and Theoni K. Georgiou
Polymers 2017, 9(1), 31; https://doi.org/10.3390/polym9010031 - 20 Jan 2017
Cited by 22 | Viewed by 8755
Abstract
In this study, seven thermoresponsive methacrylate terpolymers with the same molar mass (MM) and composition but various architectures were successfully synthesized using group transfer polymerization (GTP). These terpolymers were based on tri(ethylene glycol) methyl ether methacrylate (TEGMA, A unit), n-butyl methacrylate (BuMA, [...] Read more.
In this study, seven thermoresponsive methacrylate terpolymers with the same molar mass (MM) and composition but various architectures were successfully synthesized using group transfer polymerization (GTP). These terpolymers were based on tri(ethylene glycol) methyl ether methacrylate (TEGMA, A unit), n-butyl methacrylate (BuMA, B unit), and 2-(dimethylamino)ethyl methacrylate (DMAEMA, C unit). Along with the more common ABC, ACB, BAC, and statistical architectures, three diblock terpolymers were also synthesized and investigated for the first time, namely (AB)C, A(BC), and B(AC); where the units in the brackets are randomly copolymerized. Two BC diblock copolymers were also synthesized for comparison. Their hydrodynamic diameters and their effective pKas were determined by dynamic light scattering (DLS) and hydrogen ion titrations, respectively. The self-assembly behavior of the copolymers was also visualized by transmission electron microscopy (TEM). Both dilute and concentrated aqueous copolymer solutions were extensively studied by visual tests and their cloud points (CP) and gel points were determined. It is proven that the aqueous solution properties of the copolymers, with specific interest in their thermoresponsive properties, are influenced by the architecture, with the ABC and A(BC) ones to show clear sol-gel transition. Full article
(This article belongs to the Special Issue Young Talents in Polymer Science)
Show Figures

Graphical abstract

3097 KiB  
Article
Investigation of Thermal and Thermomechanical Properties of Biodegradable PLA/PBSA Composites Processed via Supercritical Fluid-Assisted Foam Injection Molding
by Sai Aditya Pradeep, Hrishikesh Kharbas, Lih-Sheng Turng, Abraham Avalos, Joseph G. Lawrence and Srikanth Pilla
Polymers 2017, 9(1), 22; https://doi.org/10.3390/polym9010022 - 09 Jan 2017
Cited by 39 | Viewed by 10193
Abstract
Bio-based polymer foams have been gaining immense attention in recent years due to their positive contribution towards reducing the global carbon footprint, lightweighting, and enhancing sustainability. Currently, polylactic acid (PLA) remains the most abundant commercially consumed biopolymer, but suffers from major drawbacks such [...] Read more.
Bio-based polymer foams have been gaining immense attention in recent years due to their positive contribution towards reducing the global carbon footprint, lightweighting, and enhancing sustainability. Currently, polylactic acid (PLA) remains the most abundant commercially consumed biopolymer, but suffers from major drawbacks such as slow crystallization rate and poor melt processability. However, blending of PLA with a secondary polymer would enhance the crystallization rate and the thermal properties based on their compatibility. This study investigates the physical and compatibilized blends of PLA/poly (butylene succinate-co-adipate) (PBSA) processed via supercritical fluid-assisted (ScF) injection molding technology using nitrogen (N2) as a facile physical blowing agent. Furthermore, this study aims at understanding the effect of blending and ScF foaming of PLA/PBSA on crystallinity, melting, and viscoelastic behavior. Results show that compatibilization, upon addition of triphenyl phosphite (TPP), led to an increase in molecular weight and a shift in melting temperature. Additionally, the glass transition temperature (Tg) obtained from the tanδ curve was observed to be in agreement with the Tg value predicted by the Gordon–Taylor equation, further confirming the compatibility of PLA and PBSA. The compatibilization of ScF-foamed PLA–PBSA was found to have an increased crystallinity and storage modulus compared to their physically foamed counterparts. Full article
(This article belongs to the Special Issue Young Talents in Polymer Science)
Show Figures

Graphical abstract

4143 KiB  
Article
The Effect of Thermal History on the Fast Crystallization of Poly(l-Lactide) with Soluble-Type Nucleators and Shear Flow
by Tianfeng Shen, Piming Ma, Qingqing Yu, Weifu Dong and Mingqing Chen
Polymers 2016, 8(12), 431; https://doi.org/10.3390/polym8120431 - 10 Dec 2016
Cited by 7 | Viewed by 5552
Abstract
The N1,N1ʹ-(ethane-1,2-diyl)bis(N2-phenyloxalamide) (OXA) is a soluble-type nucleator with a dissolving temperature of 230 °C in poly(l-lactic acid) (PLLA) matrix. The effect of thermal history and shear flow on the crystallization behavior of the [...] Read more.
The N1,N1ʹ-(ethane-1,2-diyl)bis(N2-phenyloxalamide) (OXA) is a soluble-type nucleator with a dissolving temperature of 230 °C in poly(l-lactic acid) (PLLA) matrix. The effect of thermal history and shear flow on the crystallization behavior of the PLLA/OXA samples was investigated by rheometry, polarized optical microscopy (POM), differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD), and scanning electron microscopy (SEM). The crystallization process of the PLLA/OXA-240 sample (i.e., pre-melted at 240 °C) was significantly promoted by applying a shear flow, e.g., the onset crystallization time (tonset) of the PLLA at 155 °C was reduced from 1600 to 200 s after shearing at 0.4 rad/s for even as short as 1.0 s, while the crystallinity (Xc) was increased to 40%. Moreover, the tonset of the PLLA/OXA-240 sample is 60%–80% lower than that of the PLLA/OXA-200 sample (i.e., pre-melted at 200 °C) with a total shear angle of 2 rad, indicating a much higher crystallization rate of the PLLA/OXA-240 sample. A better organization and uniformity of OXA fibrils can be obtained due to a complete pre-dissolution in the PLLA matrix followed by shear and oscillation treatments. The well dispersed OXA fibrils and flow-induced chain orientation are mainly responsible for the fast crystallization of the PLLA/OXA-240 samples. In addition, the shear flow created some disordered α′-form crystals in the PLLA/OXA samples regardless of the thermal history (200 or 240 °C). Full article
(This article belongs to the Special Issue Young Talents in Polymer Science)
Show Figures

Figure 1

5640 KiB  
Article
All-Inorganic Intumescent Nanocoating Containing Montmorillonite Nanoplatelets in Ammonium Polyphosphate Matrix Capable of Preventing Cotton Ignition
by Jenny Alongi and Federico Carosio
Polymers 2016, 8(12), 430; https://doi.org/10.3390/polym8120430 - 10 Dec 2016
Cited by 11 | Viewed by 6043
Abstract
In the present manuscript a new concept of completely inorganic intumescent flame retardant nanocoating comprised of sodium montmorillonite nanoplatelets embedded in an ammonium polyphosphate matrix has been investigated using cotton as model substrate. The coating, deposited by multistep adsorption from diluted water-based suspensions/solutions, [...] Read more.
In the present manuscript a new concept of completely inorganic intumescent flame retardant nanocoating comprised of sodium montmorillonite nanoplatelets embedded in an ammonium polyphosphate matrix has been investigated using cotton as model substrate. The coating, deposited by multistep adsorption from diluted water-based suspensions/solutions, homogenously cover each cotton fibers with average thicknesses below 50 nm and add-on up to 5% in weight. Combustion characterization evidences the interesting properties: indeed, the so-treated fabrics reached self-extinguishing during horizontal flame spread tests. Furthermore, when the coating add-on reaches 5%, no ignition has been observed during cone calorimetry tests under 35 kW/m2 heat flux. Residue analyses pointed out the formation of an expanded all-inorganic coating capable of greatly improving char formation by exerting barrier function towards volatile release and heat transfer. Full article
(This article belongs to the Special Issue Young Talents in Polymer Science)
Show Figures

Graphical abstract

4240 KiB  
Article
Polysarcosine-Based Lipids: From Lipopolypeptoid Micelles to Stealth-Like Lipids in Langmuir Blodgett Monolayers
by Benjamin Weber, Christine Seidl, David Schwiertz, Martin Scherer, Stefan Bleher, Regine Süss and Matthias Barz
Polymers 2016, 8(12), 427; https://doi.org/10.3390/polym8120427 - 09 Dec 2016
Cited by 23 | Viewed by 10077
Abstract
Amphiphiles and, in particular, PEGylated lipids or alkyl ethers represent an important class of non-ionic surfactants and have become key ingredients for long-circulating (“stealth”) liposomes. While poly-(ethylene glycol) (PEG) can be considered the gold standard for stealth-like materials, it is known to be [...] Read more.
Amphiphiles and, in particular, PEGylated lipids or alkyl ethers represent an important class of non-ionic surfactants and have become key ingredients for long-circulating (“stealth”) liposomes. While poly-(ethylene glycol) (PEG) can be considered the gold standard for stealth-like materials, it is known to be neither a bio-based nor biodegradable material. In contrast to PEG, polysarcosine (PSar) is based on the endogenous amino acid sarcosine (N-methylated glycine), but has also demonstrated stealth-like properties in vitro, as well as in vivo. In this respect, we report on the synthesis and characterization of polysarcosine based lipids with C14 and C18 hydrocarbon chains and their end group functionalization. Size exclusion chromatography (SEC) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis reveals that lipopeptoids with a degree of polymerization between 10 and 100, dispersity indices around 1.1, and the absence of detectable side products are directly accessible by nucleophilic ring opening polymerization (ROP). The values for the critical micelle concentration for these lipopolymers are between 27 and 1181 mg/L for the ones with C18 hydrocarbon chain or even higher for the C14 counterparts. The lipopolypeptoid based micelles have hydrodynamic diameters between 10 and 25 nm, in which the size scales with the length of the PSar block. In addition, C18PSar50 can be incorporated in 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) monolayers up to a polymer content of 3%. Cyclic compression and expansion of the monolayer showed no significant loss of polymer, indicating a stable monolayer. Therefore, lipopolypeptoids can not only be synthesized under living conditions, but my also provide a platform to substitute PEG-based lipopolymers as excipients and/or in lipid formulations. Full article
(This article belongs to the Special Issue Young Talents in Polymer Science)
Show Figures

Graphical abstract

5031 KiB  
Article
Investigating the Synergistic Effects of Combined Modified Alginates on Macrophage Phenotype
by Hannah C. Bygd and Kaitlin M. Bratlie
Polymers 2016, 8(12), 422; https://doi.org/10.3390/polym8120422 - 06 Dec 2016
Cited by 11 | Viewed by 5087
Abstract
Understanding macrophage responses to biomaterials is crucial to the success of implanted medical devices, tissue engineering scaffolds, and drug delivery vehicles. Cellular responses to materials may depend synergistically on multiple surface chemistries, due to the polyvalent nature of cell–ligand interactions. Previous work in [...] Read more.
Understanding macrophage responses to biomaterials is crucial to the success of implanted medical devices, tissue engineering scaffolds, and drug delivery vehicles. Cellular responses to materials may depend synergistically on multiple surface chemistries, due to the polyvalent nature of cell–ligand interactions. Previous work in our lab found that different surface functionalities of chemically modified alginate could sway macrophage phenotype toward either the pro-inflammatory or pro-angiogenic phenotype. Using these findings, this research aims to understand the relationship between combined material surface chemistries and macrophage phenotype. Tumor necrosis factor-α (TNF-α) secretion, nitrite production, and arginase activity were measured and used to determine the ability of the materials to alter macrophage phenotype. Cooperative relationships between pairwise modifications of alginate were determined by calculating synergy values for the aforementioned molecules. Several materials appeared to improve M1 to M2 macrophage reprogramming capabilities, giving valuable insight into the complexity of surface chemistries needed for optimal incorporation and survival of implanted biomaterials. Full article
(This article belongs to the Special Issue Young Talents in Polymer Science)
Show Figures

Figure 1

2039 KiB  
Article
Semi-Interpenetrating Polymer Networks with Predefined Architecture for Metal Ion Fluorescence Monitoring
by Kyriakos Christodoulou, Epameinondas Leontidis, Mariliz Achilleos, Christiana Polydorou and Theodora Krasia-Christoforou
Polymers 2016, 8(12), 411; https://doi.org/10.3390/polym8120411 - 29 Nov 2016
Cited by 8 | Viewed by 6349
Abstract
The development of new synthetic approaches for the preparation of efficient 3D luminescent chemosensors for transition metal ions receives considerable attention nowadays, owing to the key role of the latter as elements in biological systems and their harmful environmental effects when present in [...] Read more.
The development of new synthetic approaches for the preparation of efficient 3D luminescent chemosensors for transition metal ions receives considerable attention nowadays, owing to the key role of the latter as elements in biological systems and their harmful environmental effects when present in aquatic media. In this work, we describe an easy and versatile synthetic methodology that leads to the generation of nonconjugated 3D luminescent semi-interpenetrating amphiphilic networks (semi-IPN) with structure-defined characteristics. More precisely, the synthesis involves the encapsulation of well-defined poly(9-anthrylmethyl methacrylate) (pAnMMA) (hydrophobic, luminescent) linear polymer chains within a covalent poly(2-(dimethylamino)ethyl methacrylate) (pDMAEMA) hydrophilic polymer network, derived via the 1,2-bis-(2-iodoethoxy)ethane (BIEE)-induced crosslinking process of well-defined pDMAEMA linear chains. Characterization of their fluorescence properties demonstrated that these materials act as strong blue emitters when exposed to UV irradiation. This, combined with the presence of the metal-binding tertiary amino functionalities of the pDMAEMA segments, allowed for their applicability as sorbents and fluorescence chemosensors for transition metal ions (Fe3+, Cu2+) in solution via a chelation-enhanced fluorescence-quenching effect promoted within the semi-IPN network architecture. Ethylenediaminetetraacetic acid (EDTA)-induced metal ion desorption and thus material recyclability has been also demonstrated. Full article
(This article belongs to the Special Issue Young Talents in Polymer Science)
Show Figures

Graphical abstract

1650 KiB  
Article
Influences of Alkyl and Aryl Substituents on Iminopyridine Fe(II)- and Co(II)-Catalyzed Isoprene Polymerization
by Lihua Guo, Xinyu Jing, Shuoyan Xiong, Wenjing Liu, Yanlan Liu, Zhe Liu and Changle Chen
Polymers 2016, 8(11), 389; https://doi.org/10.3390/polym8110389 - 03 Nov 2016
Cited by 43 | Viewed by 6638
Abstract
A series of alkyl- and aryl-substituted iminopyridine Fe(II) complexes 1a7a and Co(II) complexes 2b, 3b, 5b, and 6b were synthesized. The activator effect, influence of temperature, and, particularly, the alkyl and aryl substituents’ effect on catalytic activity, polymer [...] Read more.
A series of alkyl- and aryl-substituted iminopyridine Fe(II) complexes 1a7a and Co(II) complexes 2b, 3b, 5b, and 6b were synthesized. The activator effect, influence of temperature, and, particularly, the alkyl and aryl substituents’ effect on catalytic activity, polymer molecular weight, and regio-/stereoselectivity were investigated when these complexes were applied in isoprene polymerization. All of the Fe(II) complexes afforded polyisoprene with high molecular weight and moderate cis-1,4 selectivity. In contrast, the Co(II) complexes produced polymers with low molecular weight and relatively high cis-1,4 selectivity. In the iminopyridine Fe(II) system, the alkyl and aryl substituents’ effect exhibits significant variation on the isoprene polymerization. In the iminopyridine Co(II) system, there is little influence observed on isoprene polymerization by alkyl and aryl substituents. Full article
(This article belongs to the Special Issue Young Talents in Polymer Science)
Show Figures

Graphical abstract

2107 KiB  
Article
Multiresponsive Behavior of Functional Poly(p-phenylene vinylene)s in Water
by Kanykei Ryskulova, Anupama Rao Gulur Srinivas, Thomas Kerr-Phillips, Hui Peng, David Barker, Jadranka Travas-Sejdic and Richard Hoogenboom
Polymers 2016, 8(10), 365; https://doi.org/10.3390/polym8100365 - 18 Oct 2016
Cited by 6 | Viewed by 6620
Abstract
The multiresponsive behavior of functionalized water-soluble conjugated polymers (CPs) is presented with potential applications for sensors. In this study, we investigated the aqueous solubility behavior of water-soluble CPs with high photoluminescence and with a particular focus on their pH and temperature responsiveness. For [...] Read more.
The multiresponsive behavior of functionalized water-soluble conjugated polymers (CPs) is presented with potential applications for sensors. In this study, we investigated the aqueous solubility behavior of water-soluble CPs with high photoluminescence and with a particular focus on their pH and temperature responsiveness. For this purpose, two poly(phenylene vinylene)s (PPVs)—namely 2,5-substituted PPVs bearing both carboxylic acid and methoxyoligoethylene glycol units—were investigated, with different amount of carboxylic acid units. Changes in the pH and temperature of polymer solutions led to a response in the fluorescence intensity in a pH range from 3 to 10 and for temperatures ranging from 10 to 85 °C. Additionally, it is demonstrated that the polymer with the largest number of carboxylic acid groups displays upper critical solution temperature (UCST)-like thermoresponsive behavior in the presence of a divalent ion like Ca2+. The sensing capability of these water-soluble PPVs could be utilized to design smart materials with multiresponsive behavior in biomedicine and soft materials. Full article
(This article belongs to the Special Issue Young Talents in Polymer Science)
Show Figures

Figure 1

Review

Jump to: Research

276 KiB  
Review
Dynamics of Polymer Translocation: A Short Review with an Introduction of Weakly-Driven Regime
by Takahiro Sakaue
Polymers 2016, 8(12), 424; https://doi.org/10.3390/polym8120424 - 07 Dec 2016
Cited by 33 | Viewed by 4490
Abstract
As emphasized in a recent review (by V.V. Palyulin, T. Ala-Nissila, R. Metzler), theoretical understanding of the unbiased polymer translocation lags behind that of the (strongly) driven translocation. Here, we suggest the introduction of a weakly-driven regime, as described by the linear [...] Read more.
As emphasized in a recent review (by V.V. Palyulin, T. Ala-Nissila, R. Metzler), theoretical understanding of the unbiased polymer translocation lags behind that of the (strongly) driven translocation. Here, we suggest the introduction of a weakly-driven regime, as described by the linear response theory to the unbiased regime, which is followed by the strongly-driven regime beyond the onset of nonlinear response. This provides a concise crossover scenario, bridging the unbiased to strongly-driven regimes. Full article
(This article belongs to the Special Issue Young Talents in Polymer Science)
Show Figures

Figure 1

Back to TopTop