Polymers’ Role in Sensors: Resistant Solid Supports or Multi-Purpose Sensing Units?

A special issue of Polymers (ISSN 2073-4360). This special issue belongs to the section "Polymer Applications".

Deadline for manuscript submissions: closed (30 March 2023) | Viewed by 23735

Special Issue Editors

Department of Chemistry, University of Pavia, 27100 Pavia, PV, Italy
Interests: colorimetric sensors; pH-sensitive sensors; volatile molecules detection; polymeric sensors; chemometrics; food freshness monitoring; metal ion sensing
Special Issues, Collections and Topics in MDPI journals
Department of Chemistry, University of Pavia, 27100 Pavia, PV, Italy
Interests: solid phase supramolecular receptors; specific electrochemical sensors;metal ion adsorption
Division of Chemistry and Biological Chemistry, Nanyang Technological University, Singapore 639798, Singapore
Interests: biosensor technologies; DNA analysis; food analysis

Special Issue Information

Dear Colleagues,

Polymeric materials and sensing devices undoubtedly represent two of the hottest research topics in recent years, and consequently, polymer-based sensors deserve a prominent role thanks to the countless opportunities they offer in terms of sensing mechanism, target analytes, and detection techniques. Among all the classifications and categorizations, a clear distinction can be drawn between (i) sensing devices that take advantage of polymeric materials’ unique physicochemical and mechanical properties exploiting them as inherent solid supports and (ii) sensors in which polymers play an active role in the detection of target analytes by a modification of their properties under external inputs. Although they sound very different, the widespread diffusion and the interesting results attained in both these fields manifestly demonstrate the key role polymers play in sensing devices.  

Having this distinction clear in our mind, this Special Issue aims to collect the latest ground-breaking developments reached in the field of polymer-based sensors with a particular relevance to emerging and pathbreaking devices, exploiting either unusual polymeric materials, peculiar detection techniques, or multivariate approaches to data treatment.

Dr. Lisa Rita Magnaghi
Prof. Dr. Raffaela Biesuz
Dr. Alessandra Bonanni
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Polymers is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2700 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • polymers
  • sensors
  • polymeric supports for sensing devices
  • conductive polymers
  • active polymers
  • biocompatible sensors
  • innovative sensing approaches
  • multivariate data treatment

Published Papers (14 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

12 pages, 2477 KiB  
Article
Preparation of Nanopaper for Colorimetric Food Spoilage Indication
by Zainab Al Tamimi, Longyan Chen, Xiaoxu Ji, Gary Vanderlaan, Matthew D. Gacura and Davide Piovesan
Polymers 2023, 15(14), 3098; https://doi.org/10.3390/polym15143098 - 20 Jul 2023
Viewed by 1203
Abstract
In this study, we are reporting the fabrication of a nanocellulose (NFC) paper-based food indicator for chicken breast spoilage detection by both visual color change observation and smartphone image analysis. The indicator consists of a nanocellulose paper (nanopaper) substrate and a pH-responsive dye, [...] Read more.
In this study, we are reporting the fabrication of a nanocellulose (NFC) paper-based food indicator for chicken breast spoilage detection by both visual color change observation and smartphone image analysis. The indicator consists of a nanocellulose paper (nanopaper) substrate and a pH-responsive dye, bromocresol green (BCG), that adsorbs on the nanopaper. The nanopaper is prepared through vacuum filtration and high-pressure compression. The nanopaper exhibits good optical transparency and strong mechanical strength. The color change from yellow to blue in the nanopaper indicator corresponding to an increase in the solution pH and chicken breast meat storage data were observed and analyzed, respectively. Further, we were able to use color differences determined by the RGB values from smartphone images to analyze the results, which indicates a simple, sensitive, and readily deployable approach toward the development of future smartphone-based food spoilage tests. Full article
Show Figures

Figure 1

18 pages, 5880 KiB  
Article
Metal-Filled Polyvinylpyrrolidone Copolymers: Promising Platforms for Creating Sensors
by Oleksandr Grytsenko, Ludmila Dulebova, Emil Spišák and Petro Pukach
Polymers 2023, 15(10), 2259; https://doi.org/10.3390/polym15102259 - 10 May 2023
Cited by 1 | Viewed by 1436
Abstract
This paper presents research results on the properties of composite materials based on cross-linked grafted copolymers of 2-hydroxyethylmethacrylate (HEMA) with polyvinylpyrrolidone (PVP) and their hydrogels filled with finely dispersed metal powders (Zn, Co, Cu). Metal-filled pHEMA-gr-PVP copolymers in the dry state were studied [...] Read more.
This paper presents research results on the properties of composite materials based on cross-linked grafted copolymers of 2-hydroxyethylmethacrylate (HEMA) with polyvinylpyrrolidone (PVP) and their hydrogels filled with finely dispersed metal powders (Zn, Co, Cu). Metal-filled pHEMA-gr-PVP copolymers in the dry state were studied for surface hardness and swelling ability, which was characterized by swelling kinetics curves and water content. Copolymers swollen in water to an equilibrium state were studied for hardness, elasticity, and plasticity. The heat resistance of dry composites was evaluated by the Vicat softening temperature. As a result, materials with a wide range of predetermined properties were obtained, including physico-mechanical properties (surface hardness 240 ÷ 330 MPa, hardness number 0.06 ÷ 2.8 MPa, elasticity number 75 ÷ 90%), electrical properties (specific volume resistance 102 ÷ 108 Ω⋅m), thermophysical properties (Vicat heat resistance 87 ÷ 122 °C), and sorption (swelling degree 0.7 ÷ 1.6 g (H2O)/g (polymer)) at room temperature. Resistance to the destruction of the polymer matrix was confirmed by the results concerning its behavior in aggressive media such as solutions of alkalis and acids (HCl, H2SO4, NaOH), as well as some solvents (ethanol, acetone, benzene, toluene). The obtained composites are characterized by electrical conductivity, which can be adjusted within wide limits depending on the nature and content of the metal filler. The specific electrical resistance of metal-filled pHEMA-gr-PVP copolymers is sensitive to changes in moisture (with a moisture increase from 0 to 50%, ρV decreases from 108 to 102 Ω⋅m), temperature (with a temperature change from 20 °C to 175 °C, ρV of dry samples decreases by 4.5 times), pH medium (within pH from 2 to 9, the range of ρV change is from 2 to 170 kΩ⋅m), load (with a change in compressive stress from 0 kPa to 140 kPa, ρV of swollen composites decreases by 2–4 times), and the presence of low molecular weight substances, which is proven by the example involving ethanol and ammonium hydroxide. The established dependencies of the electrical conductivity of metal-filled pHEMA-gr-PVP copolymers and their hydrogels on various factors, in combination with high strength, elastic properties, sorption capacity, and resistance to aggressive media, suggest the potential for further research as a platform for the manufacture of sensors for various purposes. Full article
Show Figures

Figure 1

13 pages, 5520 KiB  
Article
Multiscale Analysis of the Highly Stretchable Carbon−Based Polymer Strain Sensor
by Junpu Wang, Zhu Wang, Yanjiang Zuo and Wenzhi Wang
Polymers 2023, 15(7), 1780; https://doi.org/10.3390/polym15071780 - 03 Apr 2023
Cited by 1 | Viewed by 1114
Abstract
In this paper, a multiscale analysis method was proposed to simulate carbon nanoparticles (CNPs)−filled polymers which can be strain sensors applied in wearable electronic devices, flexible skin, and health monitoring fields. On the basis of the microstructure characteristics of the composite, a microscale [...] Read more.
In this paper, a multiscale analysis method was proposed to simulate carbon nanoparticles (CNPs)−filled polymers which can be strain sensors applied in wearable electronic devices, flexible skin, and health monitoring fields. On the basis of the microstructure characteristics of the composite, a microscale representative volume element model of the CNPs−filled polymer was established using the improved nearest−neighbor algorithm. By finite element analysis, the variation of the junction widths of adjacent aggregates can be extracted from the simulation results. Then, according to the conductive mechanism of CNP−filled polymers, the composite was simplified as a circuit network composed of vast random resistors which were determined by the junction widths between adjacent aggregates. Hence, by taking junction widths as the link, the resistance variation of the CNPs−filled polymer with the strain can be obtained. To verify the proposed method, the electromechanical responses of silicone elastomer filled with different CNPs under different filling amounts were investigated numerically and experimentally, respectively, and the results were in good agreement. Therefore, the multiscale analysis method can not only reveal the strain−sensing mechanism of the composite from the microscale, but also effectively predict the electromechanical behavior of the CNPs−filled polymer with different material parameters. Full article
Show Figures

Figure 1

13 pages, 5251 KiB  
Article
Negative Temperature Coefficient of Resistance in Aligned CNT Networks: Influence of the Underlying Phenomena
by Stepan V. Lomov, Iskander S. Akmanov, Qiang Liu, Qi Wu and Sergey G. Abaimov
Polymers 2023, 15(3), 678; https://doi.org/10.3390/polym15030678 - 29 Jan 2023
Cited by 2 | Viewed by 1634
Abstract
Temperature dependence of electrical conductivity/resistivity of CNT networks (dry or impregnated), which is characterised by a temperature coefficient of resistance (TCR), is experimentally observed to be negative, especially for the case of aligned CNT (A-CNT). The paper investigates the role of three phenomena [...] Read more.
Temperature dependence of electrical conductivity/resistivity of CNT networks (dry or impregnated), which is characterised by a temperature coefficient of resistance (TCR), is experimentally observed to be negative, especially for the case of aligned CNT (A-CNT). The paper investigates the role of three phenomena defining the TCR, temperature dependence of the intrinsic conductivity of CNTs, of the tunnelling resistance of their contacts, and thermal expansion of the network, in the temperature range 300–400 K. A-CNT films, created by rolling down A-CNT forests of different length and described in Lee et al., Appl Phys Lett, 2015, 106: 053110, are investigated as an example. The modelling of the electrical conductivity is performed by the nodal analysis of resistance networks, coupled with the finite-element thermomechanical modelling of network thermal expansion. The calculated TCR for the film is about −0.002 1/K and is close to the experimentally observed values. Comparative analysis of the influence of the TCR defining phenomena is performed on the case of dry and impregnated films. The analysis shows that in both cases, for an A-CNT film at the studied temperature interval, the main factor affecting a network’s TCR is the TCR of the CNTs themselves. The TCR of the tunnelling contacts plays the secondary role; influence of the film thermal expansion is marginal. The prevailing impact of the intrinsic conductivity TCR on the TCR of the film is explained by long inter-contact segments of CNTs in an A-CNT network, which define the homogenised film conductivity. Full article
Show Figures

Graphical abstract

13 pages, 4100 KiB  
Article
Tuning the Selectivity of Metal Oxide Gas Sensors with Vapor Phase Deposited Ultrathin Polymer Thin Films
by Stefan Schröder, Nicolai Ababii, Mihai Brînză, Nicolae Magariu, Lukas Zimoch, Mani Teja Bodduluri, Thomas Strunskus, Rainer Adelung, Franz Faupel and Oleg Lupan
Polymers 2023, 15(3), 524; https://doi.org/10.3390/polym15030524 - 19 Jan 2023
Cited by 3 | Viewed by 1734
Abstract
Metal oxide gas sensors are of great interest for applications ranging from lambda sensors to early hazard detection in explosive media and leakage detection due to their superior properties with regard to sensitivity and lifetime, as well as their low cost and portability. [...] Read more.
Metal oxide gas sensors are of great interest for applications ranging from lambda sensors to early hazard detection in explosive media and leakage detection due to their superior properties with regard to sensitivity and lifetime, as well as their low cost and portability. However, the influence of ambient gases on the gas response, energy consumption and selectivity still needs to be improved and they are thus the subject of intensive research. In this work, a simple approach is presented to modify and increase the selectivity of gas sensing structures with an ultrathin polymer thin film. The different gas sensing surfaces, CuO, Al2O3/CuO and TiO2 are coated with a conformal < 30 nm Poly(1,3,5,7-tetramethyl-tetravinyl cyclotetrasiloxane) (PV4D4) thin film via solvent-free initiated chemical vapor deposition (iCVD). The obtained structures demonstrate a change in selectivity from ethanol vapor to 2-propanol vapor and an increase in selectivity compared to other vapors of volatile organic compounds. In the case of TiO2 structures coated with a PV4D4 thin film, the increase in selectivity to 2-propanol vapors is observed even at relatively low operating temperatures, starting from >200 °C. The present study demonstrates possibilities for improving the properties of metal oxide gas sensors, which is very important in applications in fields such as medicine, security and food safety. Full article
Show Figures

Figure 1

14 pages, 3501 KiB  
Article
Application of High-Photoelasticity Polyurethane to Tactile Sensor for Robot Hands
by Masahiko Mitsuzuka, Jun Takarada, Ikuo Kawahara, Ryota Morimoto, Zhongkui Wang, Sadao Kawamura and Yoshiro Tajitsu
Polymers 2022, 14(23), 5057; https://doi.org/10.3390/polym14235057 - 22 Nov 2022
Viewed by 1897
Abstract
We developed a tactile sensor for robot hands that can measure normal force (FZ) and tangential forces (FX and FY) using photoelasticity. This tactile sensor has three photodiodes and three light-emitting diode (LED) white light sources. The sensor [...] Read more.
We developed a tactile sensor for robot hands that can measure normal force (FZ) and tangential forces (FX and FY) using photoelasticity. This tactile sensor has three photodiodes and three light-emitting diode (LED) white light sources. The sensor is composed of multiple elastic materials, including a highly photoelastic polyurethane sheet, and the sensor can detect both normal and tangential forces through the deformation, ben sding, twisting, and extension of the elastic materials. The force detection utilizes the light scattering resulting from birefringence. Full article
Show Figures

Graphical abstract

26 pages, 6204 KiB  
Article
Uncertainties in Electric Circuit Analysis of Anisotropic Electrical Conductivity and Piezoresistivity of Carbon Nanotube Nanocomposites
by Stepan V. Lomov, Nikita A. Gudkov and Sergey G. Abaimov
Polymers 2022, 14(22), 4794; https://doi.org/10.3390/polym14224794 - 08 Nov 2022
Cited by 4 | Viewed by 1330
Abstract
Electrical conductivity and piezoresistivity of carbon nanotube (CNT) nanocomposites are analyzed by nodal analysis for aligned and random CNT networks dependent on the intrinsic CNT conductivity and tunneling barrier values. In the literature, these parameters are assigned with significant uncertainty; often, the intrinsic [...] Read more.
Electrical conductivity and piezoresistivity of carbon nanotube (CNT) nanocomposites are analyzed by nodal analysis for aligned and random CNT networks dependent on the intrinsic CNT conductivity and tunneling barrier values. In the literature, these parameters are assigned with significant uncertainty; often, the intrinsic resistivity is neglected. We analyze the variability of homogenized conductivity, its sensitivity to deformation, and the validity of the assumption of zero intrinsic resistivity. A fast algorithm for simulation of a gauge factor is proposed. The modelling shows: (1) the uncertainty of homogenization caused by the uncertainty in CNT electrical properties is higher than the uncertainty, caused by the nanocomposite randomness; (2) for defect-prone nanotubes (intrinsic conductivity ~104 S/m), the influence of tunneling barrier energy on both the homogenized conductivity and gauge factor is weak, but it becomes stronger for CNTs with higher intrinsic conductivity; (3) the assumption of infinite intrinsic conductivity (defect-free nanotubes) has strong influence on the homogenized conductivity. Full article
Show Figures

Graphical abstract

19 pages, 7325 KiB  
Article
Construction of an Electrical Conductor, Strain Sensor, Electrical Connection and Cycle Switch Using Conductive Graphite Cotton Fabrics
by Fahad Alhashmi Alamer, Asal Aldeih, Omar Alsalmi, Khalid Althagafy and Mawaheb Al-Dossari
Polymers 2022, 14(21), 4767; https://doi.org/10.3390/polym14214767 - 07 Nov 2022
Cited by 5 | Viewed by 1590
Abstract
Researchers in science and industry are increasingly interested in conductive textiles. In this article, we have successfully prepared conductive textiles by applying a graphite dispersion to cotton fabric using a simple brush-coating-drying method and the solvents of dimethyl sulfoxide, dimethyl formamide, and a [...] Read more.
Researchers in science and industry are increasingly interested in conductive textiles. In this article, we have successfully prepared conductive textiles by applying a graphite dispersion to cotton fabric using a simple brush-coating-drying method and the solvents of dimethyl sulfoxide, dimethyl formamide, and a solvent mixture of both. The sheet resistance of the resulting cotton fabrics could be influenced by the type of polar solvent used to prepare the graphite dispersion and the concentration of graphite. In addition, the graphite cotton fabrics showed semiconductive behavior upon studying the resistance at different temperatures. A flexible strain sensor was fabricated using these graphite cotton fabrics for human motion detection. Most importantly, the resulting strain sensor functions even after 100 bending cycles, indicating its excellent reproducibility. In addition, our results have also shown that these graphite cotton fabrics can be used as electrical interconnects in electrical circuits without any visible degradation of the conductive cotton. Finally, a cotton electrical cycle switch was made using the graphite cotton fabrics and worked in the on and off state. Full article
Show Figures

Figure 1

13 pages, 6141 KiB  
Article
Influence of the Nanostitch Sensor Embedment on the Fibrous Microstructure of Glass Fiber Prepreg Laminates
by Stepan V. Lomov and Sergey G. Abaimov
Polymers 2022, 14(21), 4644; https://doi.org/10.3390/polym14214644 - 31 Oct 2022
Cited by 2 | Viewed by 2719
Abstract
Changes in the fibrous microstructure in glass fiber/epoxy prepreg quasi-isotropic laminates after the introduction of embedded sensors in the form of “nanostitch” as interleaves are investigated using 3D imaging with synchrotron radiation computer tomography (SRCT). Nanostitch interfaces are created by aligned carbon nanotubes [...] Read more.
Changes in the fibrous microstructure in glass fiber/epoxy prepreg quasi-isotropic laminates after the introduction of embedded sensors in the form of “nanostitch” as interleaves are investigated using 3D imaging with synchrotron radiation computer tomography (SRCT). Nanostitch interfaces are created by aligned carbon nanotubes (CNTs) with two different morphologies. The laminates are fabricated using an autoclave. The investigated microstructural features include: thickness variability of the plies and laminate, resin rich gaps at the interfaces, presence of voids, and misorientation of plies and misalignment of fibers deep inside the plies and close to the ply interfaces. The analysis of the SRCT images, at a resolution of 0.65 µm, shows the following: (1) the laminate preserves its thickness, with a resin/CNT-rich gap of ~5 µm created at the interface and the plies compacted by nano-capillarity; (2) there are no voids with sizes over 1–2 µm both in the baseline and nanostitched laminates; (3) the misorientation of plies (the in-plane difference of the average fiber direction from the nominal ply angle) is under 2°; (4) the misalignment (standard deviation of fiber orientations) has the same characteristics in the baseline and nanostitched laminates: it is in the range of 1.5°–3° in-plane and 2°–4° out-of-plane; the misalignment close to interfaces is increased in comparison with the misalignment deep within plies by ~1°. We conclude that the embedment of the nanostitch sensor does not alter the microstructural parameters of the laminate. Full article
Show Figures

Graphical abstract

12 pages, 2195 KiB  
Article
Influence of UV Radiation on Mechanical Properties of Polymer Optical Fibers
by Arnaldo Leal-Junior, Robertson Pires-Junior, Anselmo Frizera and Carlos A. F. Marques
Polymers 2022, 14(21), 4496; https://doi.org/10.3390/polym14214496 - 24 Oct 2022
Viewed by 1117
Abstract
This paper presents an analysis of the mechanical properties of different polymer optical fibers (POFs) at ultraviolet (UV) radiation conditions. Cyclic transparent optical polymer (CYTOP) and polymethyl methacrylate (PMMA) optical fibers are used in these analyses. In this case, the fiber samples are [...] Read more.
This paper presents an analysis of the mechanical properties of different polymer optical fibers (POFs) at ultraviolet (UV) radiation conditions. Cyclic transparent optical polymer (CYTOP) and polymethyl methacrylate (PMMA) optical fibers are used in these analyses. In this case, the fiber samples are irradiated at the same wavelength, pulse time and energy conditions for different times, namely, 10 s, 1 min, 2 min and 3 min. The samples are tested in tensile tests and dynamic mechanical thermal analysis (DMTA) to infer the variation in the static and dynamic properties of such fibers as a function of the UV radiation condition. Furthermore, reference samples of each fiber (without UV radiation) are tested for comparison purposes. The results show a lower UV resistance of PMMA fibers, i.e., higher variation in the material features in static conditions (Young’s modulus variation of 0.65 GPa). In addition, CYTOP fiber (material known for its high UV resistance related to its optical properties) also presented Young’s modulus variation of around 0.38 GPa. The reason for this reduction in the moduli is related to possible localized annealing due to thermal effects when the fibers are subjected to UV radiation. The dynamic results also indicated a higher variation in the PMMA fibers storage modulus, which is around 30% higher than the variations in the CYTOP fibers when different radiation conditions are analyzed. However, CYTOP fibers show a smaller operational temperature range and higher variation in the storage modulus as a function of the temperature when compared with PMMA fibers. In contrast, PMMA fibers show higher variations in their material properties when subjected to oscillatory loads at different frequency conditions. Thus, the results obtained in this work can be used as guidelines for the influence of UV radiation in POFs not only for the material choice, but also on the limitations of UV radiation in the fabrication of the grating as well as in sensor applications at UV radiation conditions. Full article
Show Figures

Figure 1

16 pages, 3521 KiB  
Article
Quick and Easy Covalent Grafting of Sulfonated Dyes to CMC: From Synthesis to Colorimetric Sensing Applications
by Lisa Rita Magnaghi, Camilla Zanoni, Denise Bellotti, Giancarla Alberti, Paolo Quadrelli and Raffaela Biesuz
Polymers 2022, 14(19), 4061; https://doi.org/10.3390/polym14194061 - 27 Sep 2022
Cited by 2 | Viewed by 2029
Abstract
Carboxymethyl cellulose, the most promising cellulose-derivatives, pulls together low cost, abundancy, biocompatibility, unique properties and, unlike the precursor, chemical reactivity. This latter aspect arouses the curiosity of chemists around the possibility of chemical modification and the production of interesting functional materials. Here, a [...] Read more.
Carboxymethyl cellulose, the most promising cellulose-derivatives, pulls together low cost, abundancy, biocompatibility, unique properties and, unlike the precursor, chemical reactivity. This latter aspect arouses the curiosity of chemists around the possibility of chemical modification and the production of interesting functional materials. Here, a two-step reaction is proposed for the covalent anchoring of a wide variety of molecules containing sulfonic groups to CMC. The strength points of the proposed pathway have to be found in the quick and easy reactions and workup that allow to obtain ready-to-use functional materials with very high yields. Having in this case exploited a pH-sensitive dye as a sulfonated molecule, the functional material is an interesting candidate for the development of colorimetric miniaturized sensors via the following drop-casting deposition: once optimized sensors preparation by design of experiments, an example of application on real samples is reported. Full article
Show Figures

Graphical abstract

15 pages, 5302 KiB  
Article
A Surface Plasmon Resonance-Based Photonic Crystal Fiber Sensor for Simultaneously Measuring the Refractive Index and Temperature
by Jingao Zhang, Jinhui Yuan, Yuwei Qu, Shi Qiu, Chao Mei, Xian Zhou, Binbin Yan, Qiang Wu, Kuiru Wang, Xinzhu Sang and Chongxiu Yu
Polymers 2022, 14(18), 3893; https://doi.org/10.3390/polym14183893 - 17 Sep 2022
Cited by 12 | Viewed by 1601
Abstract
In this paper, a surface plasmon resonance (SPR)-based photonic crystal fiber (PCF) sensor is proposed for simultaneously measuring the refractive index (RI) and temperature. In the design, the central air hole and external surface of the proposed PCF are coated with gold films, [...] Read more.
In this paper, a surface plasmon resonance (SPR)-based photonic crystal fiber (PCF) sensor is proposed for simultaneously measuring the refractive index (RI) and temperature. In the design, the central air hole and external surface of the proposed PCF are coated with gold films, and an air hole is filled with the temperature-sensitive material (TSM). By introducing the inner and outer gold films and TSM, the RI and temperature can be measured simultaneously at different wavelength regions. The simulation results show that the average wavelength sensitivities of the proposed SPR-based PCF sensor can reach 4520 nm/RIU and 4.83 nm/°C in the RI range of 1.35~1.40 and a temperature range of 20~60 °C, respectively. Moreover, because of using the different wavelength regions for sensing, the RI and temperature detections of the proposed SPR-based PCF sensor can be achieved independently. It is believed that the proposed SPR-based PCF RI and temperature sensor has important applications in biomedicine and in environmental science. Full article
Show Figures

Figure 1

15 pages, 3320 KiB  
Article
Polymer Conductive Membrane-Based Circular Capacitive Pressure Sensors from Non-Touch Mode of Operation to Touch Mode of Operation: An Analytical Solution-Based Method for Design and Numerical Calibration
by Qi Zhang, Fei-Yan Li, Xue Li, Xiao-Ting He and Jun-Yi Sun
Polymers 2022, 14(18), 3850; https://doi.org/10.3390/polym14183850 - 14 Sep 2022
Cited by 1 | Viewed by 1408
Abstract
Polymer-based conductive membranes play an important role in the development of elastic deflection-based pressure sensors. In this paper, an analytical solution-based method is presented for the design and numerical calibration of polymer conductive membrane-based circular capacitive pressure sensors from non-touch mode of operation [...] Read more.
Polymer-based conductive membranes play an important role in the development of elastic deflection-based pressure sensors. In this paper, an analytical solution-based method is presented for the design and numerical calibration of polymer conductive membrane-based circular capacitive pressure sensors from non-touch mode of operation to touch mode of operation. The contact problem of a circular membrane in frictionless contact with a rigid flat plate under pressure is analytically solved, and its analytical solution is used for the design of touch mode circular capacitive pressure sensors for the first time. The analytical relationship with input pressure as independent variable and output capacitance as dependent variable is precisely derived and is used for the numerical calibrations of the analytical relationships with input capacitance as the independent variable and output pressure as the dependent variable in order to meet the capacitive pressure sensor mechanism of detecting pressure by measuring capacitance. For the first time, an example showing the design and numerical calibration of a given (given design parameters) polymer conductive membrane-based circular capacitive pressure sensor from non-touch mode of operation to touch mode of operation is provided. Then, the influence of changing several important design parameters on input capacitance–output pressure relationships is comprehensively investigated in order to clarify the desired input–output relationships when changing design parameters. Full article
Show Figures

Figure 1

9 pages, 6420 KiB  
Communication
Highly Sensitive Temperature Sensor Based on Cascaded Polymer-Infiltrated Fiber Mach–Zehnder Interferometers Operating near the Dispersion Turning Point
by Jia He, Fengchan Zhang, Xizhen Xu, Bin Du, Jiafeng Wu, Zhuoda Li, Zhiyong Bai, Jinchuan Guo, Yiping Wang and Jun He
Polymers 2022, 14(17), 3617; https://doi.org/10.3390/polym14173617 - 01 Sep 2022
Cited by 3 | Viewed by 1348
Abstract
High-accuracy temperature measurement plays a vital role in biomedical, oceanographic, and photovoltaic industries. Here, a highly sensitive temperature sensor is proposed and demonstrated based on cascaded polymer-infiltrated Mach–Zehnder interferometers (MZIs), operating near the dispersion turning point. The MZI was constructed by splicing a [...] Read more.
High-accuracy temperature measurement plays a vital role in biomedical, oceanographic, and photovoltaic industries. Here, a highly sensitive temperature sensor is proposed and demonstrated based on cascaded polymer-infiltrated Mach–Zehnder interferometers (MZIs), operating near the dispersion turning point. The MZI was constructed by splicing a half-pitch graded index fiber (GIF) and two sections of single-mode fiber and creating an inner air cavity based on femtosecond laser micromachining. The UV-curable polymer-infiltrated air cavity functioned as one of the interference arms of MZI, and the residual GIF core functioned as the other. Two MZIs with different cavity lengths and infiltrated with the UV-curable polymers, having the refractive indexes on the different sides of the turning point, were created. Moreover, the effects of the length and the bending way of transmission SMF between the first and the second MZI were studied. As a result, the cascaded MZI temperature sensor exhibits a greatly enhanced temperature sensitivity of −24.86 nm/°C based on wavelength differential detection. The aforementioned result makes it promising for high-accuracy temperature measurements in biomedical, oceanographic, and photovoltaic applications. Full article
Show Figures

Graphical abstract

Back to TopTop