Aging Behavior and Durability of Polymer Materials

A special issue of Polymers (ISSN 2073-4360). This special issue belongs to the section "Polymer Analysis and Characterization".

Deadline for manuscript submissions: closed (31 December 2023) | Viewed by 14350

Special Issue Editors

Department of Textile Design and Management, University of Zagreb, Zagreb, Croatia
Interests: materials; comfort; aging; evaluation; protocol
Department of Clothing Technology, University of Zagreb, Zagreb, Croatia
Interests: technology; clothing; aging; automation; comfort; robots
Department of Textile and Fibre Engineering, Indian Institute of Technology Delhi, New Delhi 110016, India
Interests: circular supply chain management; social sustainability in supply chain; supply chain resilience; AI, ML-based modelling in fashion and textiles
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

Polymer materials are widely used in different areas of human activity due to a number of favorable properties. However, the aging of materials at a certain level causes degradation in properties that directly affects the performance. The durability of polymeric materials is affected by a number of parameters, from the material properties, manufacturing parameters, type and level of aging, complex environmental conditions to the determinants of use, and more.

Recently, the interest of scientists is highly focussed towards the aging behavior of polymer materials, as well as durability issues. The development of adequate scientific methods, and procedures to foresee the long-term performance of polymer materials is ever going mission.

This Special Issue aims at providing a platform for the discussion of achievements and challenges related to the aging and durability behaviour of polymers, and analysis of their properties that changed due to aging. It is also directed towards processes that will increase durability features in order to retain long-term performance.

Prof. Dr. Ivana Salopek Čubrić
Dr. Goran Čubrić
Prof. Dr. Abhijit Majumdar
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Polymers is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2700 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • polymer aging
  • durability
  • properties
  • weathering
  • tests
  • protocols

Published Papers (8 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

Jump to: Review

16 pages, 4360 KiB  
Article
Performance of Thermal-Oxidative Aging on the Structure and Properties of Ethylene Propylene Diene Monomer (EPDM) Vulcanizates
by Quanchao Hu, Qiang Chen, Peiru Song, Xingyu Gong, Junyi Chen and Yongxian Zhao
Polymers 2023, 15(10), 2329; https://doi.org/10.3390/polym15102329 - 16 May 2023
Cited by 4 | Viewed by 1968
Abstract
A thermal-oxidative aging test at 120 °C was conducted on ethylene propylene diene monomer (EPDM) vulcanizates of the semi-efficient vulcanization system. The effect of thermal-oxidative aging on EPDM vulcanizates was systematically studied by curing kinetics, aging coefficient, crosslinking density, macroscopic physical properties, contact [...] Read more.
A thermal-oxidative aging test at 120 °C was conducted on ethylene propylene diene monomer (EPDM) vulcanizates of the semi-efficient vulcanization system. The effect of thermal-oxidative aging on EPDM vulcanizates was systematically studied by curing kinetics, aging coefficient, crosslinking density, macroscopic physical properties, contact angle, Fourier Transform Infrared Spectrometer (FTIR), Thermogravimetric analysis (TGA) and thermal decomposition kinetics. The results show that the content of hydroxyl and carbonyl groups as well as the carbonyl index increased with increasing aging time, indicating that EPDM vulcanizates were gradually oxidized and degraded. As a result, the EPDM vulcanized rubber chains were crosslinked with limited conformational transformation and weakened flexibility. The thermogravimetric analysis demonstrates that the thermal degradation of EPDM vulcanizates had competitive reactions of crosslinking and degradation, and the thermal decomposition curve can be divided into three stages; meanwhile, the thermal stability of EPDM vulcanizates gradually decreased with increasing aging time. The introduction of antioxidants in the system can promote the crosslinking speed and reduce the crosslinking density of EPDM vulcanizates while inhibiting the surface thermal and oxygen aging reaction. This was attributed to the fact that the antioxidant can reduce the thermal degradation reaction level, but it is not conducive to the formation of a perfect crosslinking network structure and reduces the activation energy of thermal degradation of the main chain. Full article
(This article belongs to the Special Issue Aging Behavior and Durability of Polymer Materials)
Show Figures

Figure 1

16 pages, 5205 KiB  
Article
Aging of Industrial Polypropylene Surfaces in Detergent Solution and Its Consequences for Biofilm Formation
by Julian Cremer, Bernhard P. Kaltschmidt, Annika Kiel, Jens Eberhard, Stephan Schmidt, Christian Kaltschmidt, Barbara Kaltschmidt, Andreas Hütten and Dario Anselmetti
Polymers 2023, 15(5), 1247; https://doi.org/10.3390/polym15051247 - 28 Feb 2023
Cited by 2 | Viewed by 1793
Abstract
The performance of plastic components in water-bearing parts of industrial and household appliances, often in the presence of harsh environments and elevated temperatures, critically relies on the mechanical and thermal polymer stability. In this light, the precise knowledge of aging properties of polymers [...] Read more.
The performance of plastic components in water-bearing parts of industrial and household appliances, often in the presence of harsh environments and elevated temperatures, critically relies on the mechanical and thermal polymer stability. In this light, the precise knowledge of aging properties of polymers formulated with dedicated antiaging additive packages as well as various fillers is crucial for long-time device warranty. We investigated and analysed the time-dependent, polymer-liquid interface aging of different industrial performance polypropylene samples in aqueous detergent solution at high temperatures (95 °C). Special emphasis was put on the disadvantageous process of consecutive biofilm formation that often follows surface transformation and degradation. Atomic force microscopy, scanning electron microscopy, and infrared spectroscopy were used to monitor and analyse the surface aging process. Additionally, bacterial adhesion and biofilm formation was characterised by colony forming unit assays. One of the key findings is the observation of crystalline, fibre-like growth of ethylene bis stearamide (EBS) on the surface during the aging process. EBS is a widely used process aid and lubricant enabling the proper demoulding of injection moulding plastic parts. The aging-induced surface-covering EBS layers changed the surface morphology and promoted bacterial adhesion as well as biofilm formation of Pseudomonas aeruginosa. Full article
(This article belongs to the Special Issue Aging Behavior and Durability of Polymer Materials)
Show Figures

Figure 1

12 pages, 1750 KiB  
Article
Natural Aging Life Prediction of Rubber Products Using Artificial Bee Colony Algorithm to Identify Acceleration Factor
by Xiaohui Guo, Xiaojing Yuan, Genliang Hou, Ze Zhang and Guangyong Liu
Polymers 2022, 14(17), 3439; https://doi.org/10.3390/polym14173439 - 23 Aug 2022
Cited by 5 | Viewed by 1466
Abstract
We aim to predict the natural aging life of 8016 ethylene propylene rubber accurately and quickly. Based on the time-temperature equivalent superposition principle, the artificial bee colony algorithm was introduced to calculate the acceleration factor of the accelerated aging test, and the calculation [...] Read more.
We aim to predict the natural aging life of 8016 ethylene propylene rubber accurately and quickly. Based on the time-temperature equivalent superposition principle, the artificial bee colony algorithm was introduced to calculate the acceleration factor of the accelerated aging test, and the calculation of the acceleration factor was considered an optimization problem, which avoided the error superposition problem caused by data fitting at each temperature. Based on the traditional Arrhenius equation, a power exponential factor was introduced to consider the non-Arrhenius phenomenon during the rubber aging process. Finally, the aging prediction curve of 8106 ethylene propylene rubber at 25 °C was obtained. The prediction results show that the artificial bee colony algorithm can quickly and accurately identify the acceleration factor of the accelerated aging test. The dispersion coefficients between the predicted and measured results of the improved and traditional Arrhenius equations are 1.0351 and 1.6653, respectively, which indicates that the improved Arrhenius equation is more advantageous in predicting the long-term aging process of rubber products. Full article
(This article belongs to the Special Issue Aging Behavior and Durability of Polymer Materials)
Show Figures

Figure 1

22 pages, 6089 KiB  
Article
On the Use of Oxidation Induction Time as a Kinetic Parameter for Condition Monitoring and Lifetime Evaluation under Ionizing Radiation Environments
by Eduard-Marius Lungulescu, Radu Setnescu, Sorin Ilie and Mauro Taborelli
Polymers 2022, 14(12), 2357; https://doi.org/10.3390/polym14122357 - 10 Jun 2022
Cited by 6 | Viewed by 1674
Abstract
The durability of polymeric materials is closely linked to their degradation under specific operating conditions when different stressors—general or specific, such as high temperature, sunlight or ionizing radiation, solvents, or mechanical stresses—act simultaneously, causing degradation. In the case of electrical cables, the durability [...] Read more.
The durability of polymeric materials is closely linked to their degradation under specific operating conditions when different stressors—general or specific, such as high temperature, sunlight or ionizing radiation, solvents, or mechanical stresses—act simultaneously, causing degradation. In the case of electrical cables, the durability of the electrically insulating materials used in their construction is an important parameter to ensure their operational security. In this work, we studied the degradation state of various types of electrical insulating materials from cables used in particle acceleration systems under European Organization for Nuclear Research (CERN) conditions (e.g., Super Proton Synchrotron, SPS) as a function of time and irradiation dose. A simple kinetic model was proposed based on the exponential decrease in the antioxidant amount in polymeric insulations. The onset oxidation time (OIT) values, used as an indicator of antioxidant concentration, were obtained from isothermal differential scanning calorimetry (DSC) and chemiluminescence (CL) measurements. Fourier transform infrared (FTIR) measurements were used to assess the degradation state and identify polymeric materials. The practical applicability of such a model in diagnosing degradation and in the subsequent evaluation of the remaining service life is of interest, as it can be adapted to a broad range of operating conditions and materials. Full article
(This article belongs to the Special Issue Aging Behavior and Durability of Polymer Materials)
Show Figures

Figure 1

23 pages, 7321 KiB  
Article
Evaluation of Changes in Polymer Material Properties Due to Aging in Different Environments
by Ivana Salopek Čubrić, Goran Čubrić, Ines Katić Križmančić and Monika Kovačević
Polymers 2022, 14(9), 1682; https://doi.org/10.3390/polym14091682 - 21 Apr 2022
Cited by 9 | Viewed by 2019
Abstract
With the increase in awareness of the importance of engagement in physical activities, high requirements have been placed on polymers intended for use in sports. A number of authors investigated the influence of aging factors on the performance of the polymer. Still, there [...] Read more.
With the increase in awareness of the importance of engagement in physical activities, high requirements have been placed on polymers intended for use in sports. A number of authors investigated the influence of aging factors on the performance of the polymer. Still, there is a lack of aging protocols that would be product-centered, especially when high performance is imperative. This paper presents a new approach to polymer aging and examines the change of the identified set of properties due to aging under different conditions, and the duration of each (topography, thickness, moisture management, elongation, and bursting force). The results of the testing revealed the increase in thickness due to exposure, especially to the sun-exposed materials. The ability of materials to elongate until the moment of rupture decreases due to exposure to the sun (strong relationship to the time of exposure; R2 reaches 0.99) and the bursting force (up to 6.8%). Furthermore, results indicate the significantly impaired capacity of the polymer material to absorb moisture. The results of measurements indicated (derived) by spectroscopic studies, based on the ATR-FTIR (attenuated total reflectance) method, showed that there was no detectable influence of aging in the sun or shade on the chemical structure of polyester samples. Full article
(This article belongs to the Special Issue Aging Behavior and Durability of Polymer Materials)
Show Figures

Graphical abstract

14 pages, 3648 KiB  
Article
Concentration Prediction of Polymer Insulation Aging Indicator-Alcohols in Oil Based on Genetic Algorithm-Optimized Support Vector Machines
by Shuyue Wu, Heng Zhang, Yuxuan Wang, Yiwen Luo, Jiaxuan He, Xiaotang Yu, Yiyi Zhang, Jiefeng Liu and Feng Shuang
Polymers 2022, 14(7), 1449; https://doi.org/10.3390/polym14071449 - 02 Apr 2022
Cited by 5 | Viewed by 1736
Abstract
The predictive model of aging indicator based on intelligent algorithms has become an auxiliary method for the aging condition of transformer polymer insulation. However, most of the current research on the concentration prediction of aging products focuses on dissolved gases in oil, and [...] Read more.
The predictive model of aging indicator based on intelligent algorithms has become an auxiliary method for the aging condition of transformer polymer insulation. However, most of the current research on the concentration prediction of aging products focuses on dissolved gases in oil, and the concentration prediction of alcohols in oil is ignored. As new types of aging indicators, alcohols (methanol, ethanol) are becoming prevalent in the aging evaluation of transformer polymer insulation. To address this, this study proposes a prediction model for the concentration of alcohols based on a genetic-algorithm-optimized support vector machine (GA-SVM). Firstly, accelerated thermal aging experiments on oil-paper insulation are conducted, and the concentration of alcohols is measured. Then, the data of the past 4 days of aging are used as the input feature of SVM, and the GA algorithm is utilized to optimize the kernel function parameter and penalty factor of SVM. Moreover, the concentrations of methanol and ethanol are predicted, after which the prediction accuracy of other algorithms and GA-SVM are compared. Finally, an industrial software program for predicting the concentration of methanol and ethanol is established. The results show that the mean square errors (MSE) of methanol and ethanol concentration predictions of the model proposed in this paper are 0.008 and 0.003, respectively. The prediction model proposed in this paper can track changes in methanol and ethanol concentrations well, providing a theoretical basis for the field of alcohol concentration prediction in transformer oil. Full article
(This article belongs to the Special Issue Aging Behavior and Durability of Polymer Materials)
Show Figures

Figure 1

20 pages, 8570 KiB  
Article
Degradation Performance Investigation of Hydrothermally Stressed Epoxy Micro and Nanocomposites for High Voltage Insulation
by Faiza, Abraiz Khattak, Ahmad Aziz Alahamdi and Muhammad Bilal Iqbal
Polymers 2022, 14(6), 1094; https://doi.org/10.3390/polym14061094 - 09 Mar 2022
Cited by 4 | Viewed by 1575
Abstract
Epoxy resins have demonstrated remarkable properties with potential for usage as high voltage insulators. However, a loss of these properties has been observed in high temperature and humid environments. In order to enhance the hydrothermal stability of epoxy resins, micro (15% SiO2 [...] Read more.
Epoxy resins have demonstrated remarkable properties with potential for usage as high voltage insulators. However, a loss of these properties has been observed in high temperature and humid environments. In order to enhance the hydrothermal stability of epoxy resins, micro (15% SiO2) and nano (5% SiO2) silica-based composites of epoxy were fabricated and subjected to standard long term and short term accelerated hydrothermal conditions. To analyze the effect of these stresses, the samples were analyzed periodically through Fourier transform infrared spectroscopy (FTIR) for structure analysis; scanning electron microscopy (SEM) for surface analysis of long-term aged samples; and optical microscopy for the surface topography of short-term aged samples. The Swedish Transmission Research Institute (STRI) classification and contact angle measurement techniques were used for hydrophobicity analysis of long-term and short-term aged samples, respectively. After aging in both conditions, the nanocomposite showed better results as compared to the other samples. After 1000 h of aging, it showed HC-5 class of hydrophobicity, whereas EMC and NE degraded to the HC-6. In case of short-term aging, the contact angle decreased to the 64.15° and 75.05° from 104.15° and 114.9° for ENC and EMC, respectively. Also, in terms of structural degradation, ENC showed the highest structural stability after 1000 h of aging with the highest stable peak of aromatic ether at 1300–1500 cm−1. Microscopic observation through scanning electron and optical techniques also revealed superior performance of the nanocomposites. Full article
(This article belongs to the Special Issue Aging Behavior and Durability of Polymer Materials)
Show Figures

Figure 1

Review

Jump to: Research

14 pages, 1366 KiB  
Review
Contributing Factors of Uneven Climatic Aging for Polymeric Composite Materials: Methods and Modelling
by Mikhail P. Lebedev, Oleg V. Startsev, Anatoly K. Kychkin, Mark G. Petrov and Michail M. Kopyrin
Polymers 2023, 15(6), 1458; https://doi.org/10.3390/polym15061458 - 15 Mar 2023
Cited by 1 | Viewed by 1012
Abstract
Regarding a wide variety of PCMs, the materials’ strength properties which decrease no more than 20% after 30 years of operation are of special interest. One of the important regularities of the climatic aging of PCMs is the formation of gradients of mechanical [...] Read more.
Regarding a wide variety of PCMs, the materials’ strength properties which decrease no more than 20% after 30 years of operation are of special interest. One of the important regularities of the climatic aging of PCMs is the formation of gradients of mechanical parameters across the thickness of the plates. The occurrence of gradients must be taken into account when modeling the strength of PCMs for long periods of operation. At present, there is no scientific basis for the reliable prediction of the physical-mechanical characteristics of PCMs for a long period of operation in the world of science. Nevertheless, “climatic qualification” has been a universally recognized practice of substantiating the safe operation of PCMs for various branches of mechanical engineering. In this review, the influence of solar radiation, temperature, and moisture according to gradients of mechanical parameters across the thickness of the PCMs are analyzed according to the data of dynamic mechanical analysis, linear dilatometry, profilometry, acoustic emission, and other methods. In addition, the mechanisms of uneven climatic PCM aging are revealed. Finally, the problems of theoretical modeling of uneven climatic aging of composites are identified. Full article
(This article belongs to the Special Issue Aging Behavior and Durability of Polymer Materials)
Show Figures

Figure 1

Back to TopTop