Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
5.5
3.2
Journals
Energies
Special Issues
Advances in Photovoltaic/Solar Collectors and Their Potential for an Industrial...
energies-logo
Submit to Special Issue Submit Abstract to Special Issue Review for Energies Propose a Special Issue

Journal Menu

► Journal Menu

Journal Browser

► Journal Browser
share announcement

Advances in Photovoltaic/Solar Collectors and Their Potential for an Industrial Decarbonization

A special issue of Energies (ISSN 1996-1073). This special issue belongs to the section "A2: Solar Energy and Photovoltaic Systems".

Deadline for manuscript submissions: 30 August 2024 | Viewed by 4448

Special Issue Editor

Dr. Bruno D. Tibúrcio

E-Mail Website
Guest Editor
CEFITEC, Physics Department, NOVA School of Science and Technology, 2829-516 Caparica, Portugal
Interests: concentrated solar power; solar-pumped lasers; tracking error in solar collectors; PV cells; applied optics; laser technology

Special Issue Information

Dear Colleagues,

The development of renewable energy technology is now widely considered of paramount importance to moving towards sustainable energy generation and climate change mitigation. The low-energy density and seasonal variations, with geographical dependence, make the development of high-solar-energy concentration systems an important and challenging investigation. Advances in solar collectors and solar energy concentration enable not only a massive scaling in energy production but also can lead to industrial decarbonisation. The efficiency of solar collectors and other solar energy concentration systems is significantly affected by errors in their alignment with the Sun. Thus, the necessity and the importance of solar tracking systems become a critical key for the development and implementation of any photovoltaic system or solar collector.

This Special Issue is intended to collect original research works, reviews and case studies on innovative technology developments to maximize the collection efficiency of different energy generation systems. The topics of interest for publication include, but are not limited to, the following:

- New progresses in solar collectors to maximize the collection efficiency of different energy generation systems.
- Advancements in the solar collection and concentration efficiency.
- PV technology/solar collectors and their potential applications for a low-carbon industry.
- Improved solar tracking for energy-production systems.
- Developments in solar cells for PV technology.
- Solar-pumped lasers.
- Solar energy collectors for hydrogen production.
- Integrated operation of solar collectors, energy storage and potential industrial applications.

Dr. Bruno D. Tibúrcio
Guest Editor

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Energies is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2600 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • solar collectors
  • industrial decarbonization
  • PV cells
  • solar tracking

Published Papers (4 papers)

Download All Papers
Order results
Result details
Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:

Research

22 pages, 5766 KiB  
Article
Studying the Improvement of Solar Collector Mechanism with Phase Change Materials
by Maha Rahman Rahi, Saba Ostadi, Amin Rahmani, Mahdieh Dibaj and Mohammad Akrami
Energies 2024, 17(6), 1432; https://doi.org/10.3390/en17061432 - 16 Mar 2024
Viewed by 587
Abstract
This study delves into the integration of phase change materials (PCM) in solar thermal collector systems to address this challenge. By incorporating nano encapsulated PCMs, researchers have mitigated concerns surrounding PCM leakage, revolutionizing the potential of solar collector systems to elevate energy efficiency, [...] Read more.
This study delves into the integration of phase change materials (PCM) in solar thermal collector systems to address this challenge. By incorporating nano encapsulated PCMs, researchers have mitigated concerns surrounding PCM leakage, revolutionizing the potential of solar collector systems to elevate energy efficiency, diminish carbon emissions, and yield manifold benefits. This article comprehensively investigates the design and utilization of solar phase change energy storage devices and examines the transformative impact of employing nano-coated phase change materials (Nano capsules) to augment solar collector performance. The integration of paraffin-based PCM and the insulation of the collector system have been crucial in optimizing heat retention and operational efficacy. The composition of the PCM involves a balanced blend of octadecane phase-change particles and water as the base fluid, designed to maximize thermal performance. Analysis of the experimental findings demonstrates the dynamic thermal behavior of the nano encapsulated phase change material, revealing distinctive temperature profiles about fluid dynamics and absorbent characteristics. Notably, the study emphasizes the nuanced trade-offs associated with the conductivity and melting temperature of the Nano encapsulated PCM, yielding valuable insights into energy storage capacity limitations and thermal performance variations throughout diurnal cycles. Central to the investigation, the optimal nanoparticle proportion is elucidated, shedding light on its pivotal role in modulating PCM performance. Furthermore, findings underscore the complex interplay between nanoparticle volume fraction and thermal fluid temperature, providing critical perspectives on optimizing PCM-enhanced solar collector systems. Full article
(This article belongs to the Special Issue Advances in Photovoltaic/Solar Collectors and Their Potential for an Industrial Decarbonization)
►▼ Show Figures

Figure 1

25 pages, 4510 KiB  
Article
Techno-Economic Assessment of the Viability of Commercial Solar PV System in Port Harcourt, Rivers State, Nigeria
by Muzan Williams Ijeoma, Hao Chen, Michael Carbajales-Dale and Rahimat Oyiza Yakubu
Energies 2023, 16(19), 6803; https://doi.org/10.3390/en16196803 - 25 Sep 2023
Cited by 1 | Viewed by 1696
Abstract
Supermarkets in Port Harcourt (PH) city, Nigeria, predominantly rely on diesel electricity generation due to grid instability, leading to high electricity prices. Although solar photovoltaic (PV) systems have been proposed as an alternative, these supermarkets have yet to adopt them, mainly due to [...] Read more.
Supermarkets in Port Harcourt (PH) city, Nigeria, predominantly rely on diesel electricity generation due to grid instability, leading to high electricity prices. Although solar photovoltaic (PV) systems have been proposed as an alternative, these supermarkets have yet to adopt them, mainly due to high investment costs and a lack of awareness of the long-term financial and environmental benefits. This paper examines the technical and economic practicality of a PV system for these supermarkets using the PVsyst software and a spreadsheet model. Solar resources showed that PH has a daily average solar radiation and temperature of 4.21 kWh/m2/day and 25.73 °C, respectively. Market Square, the supermarket with the highest peak power demand of 59.8 kW and a 561 kWh/day load profile, was chosen as a case study. A proposed PV system with a power capacity of 232 kW, battery storage capacity of 34,021 Ah, a charge controller size of 100 A/560 V, and an inverter with a power rating of 60 V/75 kW has been designed to meet the load demand. The economic analysis showed a $266,936 life cycle cost, $0.14 per kWh levelized cost of electricity (LCOE), a 4-year simple payback time, and a 20.5% internal rate of return (IRR). The PV system is feasible due to its positive net present value (NPV) of $165,322 and carbon savings of 582 tCO2/year. Full article
(This article belongs to the Special Issue Advances in Photovoltaic/Solar Collectors and Their Potential for an Industrial Decarbonization)
►▼ Show Figures

Figure 1

12 pages, 3751 KiB  
Article
Fresnel Lens Solar-Pumped Laser with Four Rods and Beam Merging Technique for Uniform and Stable Emission under Tracking Error Influence
by Bruno D. Tibúrcio, Dawei Liang, Joana Almeida, Dário Garcia, Miguel Catela, Hugo Costa and Cláudia R. Vistas
Energies 2023, 16(12), 4815; https://doi.org/10.3390/en16124815 - 20 Jun 2023
Viewed by 790
Abstract
Significant numerical improvements in Fresnel lens Nd:YAG solar laser collection efficiency, laser quality factors and tracking error compensation capacity by two Fresnel lenses as primary solar concentrators are reported here. A Nd:YAG four-rod side-pumping configuration was investigated. The four-rod side-pumping scheme consisted of [...] Read more.
Significant numerical improvements in Fresnel lens Nd:YAG solar laser collection efficiency, laser quality factors and tracking error compensation capacity by two Fresnel lenses as primary solar concentrators are reported here. A Nd:YAG four-rod side-pumping configuration was investigated. The four-rod side-pumping scheme consisted of two large aspherical lenses and four semi-cylindrical pump cavities, where the Nd:YAG laser rods were placed, enabling an efficient solar pumping of the laser crystals. A 104.4 W continuous-wave multimode solar laser power was achieved, corresponding to 29.7 W/m2 collection efficiency, which is 1.68 times that of the most efficient experimental Nd:YAG side-pumped solar laser scheme with heliostat–parabolic mirror systems. End-side-pumped configuration has led to the most efficient multimode solar lasers, but it may cause more prejudicial thermal effects, poor beam quality factors and a lack of access to both rod end-faces to optimize the resonant cavity parameters. In the present work, an eight-folding-mirror laser beam merging technique was applied, aiming to attain one laser emission from the four laser rods that consist of the four-rod side-pumping scheme with a higher brightness figure of merit. A 79.8 W multimode laser output power was achieved with this arrangement, corresponding to 22.7 W/m2. The brightness figure of merit was 0.14 W, being 1.6, 21.9 and 15.7 times that of previous experimental Nd:YAG solar lasers pumped by Fresnel lenses. A significant advance in tracking error tolerance was also numerically attained, leading to a 1.5 times enhancement in tracking error width at 10% laser power loss (TEW10%) compared to previous experimental results. Full article
(This article belongs to the Special Issue Advances in Photovoltaic/Solar Collectors and Their Potential for an Industrial Decarbonization)
►▼ Show Figures

Figure 1

17 pages, 24915 KiB  
Article
Developed Brinkman Model into a Porous Collector for Solar Energy Applications with a Single-Phase Flow
by Mojtaba Rezapour, Sayyed Aboozar Fanaee and Maryam Ghodrat
Energies 2022, 15(24), 9499; https://doi.org/10.3390/en15249499 - 14 Dec 2022
Cited by 2 | Viewed by 991
Abstract
In this paper, the effects of the fluid-thermal parameters of a porous medium with different values of porosity and permeability on the fluid flow, heat, and concentration parameters were investigated for solar energy applications. The characteristics of the boundary layer, velocity profiles, pressure [...] Read more.
In this paper, the effects of the fluid-thermal parameters of a porous medium with different values of porosity and permeability on the fluid flow, heat, and concentration parameters were investigated for solar energy applications. The characteristics of the boundary layer, velocity profiles, pressure drop, and thermal and high heat concentration distribution have been analyzed. A developed Brinkman equation for fluid flow and a power law model for thermal conductivity (considering the porosity and permeability factors) were calculated with constant solar heat flux. The numerical model was developed based on the finite element method by the LU algorithm using the MUMPS solver. The Brinkman equations were solved under steady and unsteady states for velocity, pressure, thermal, and concentration distribution effects, respectively. In a porous medium, the normalized temperature of the presented model had an acceptable agreement with the experimental data, with a maximum error of 3%. At constant permeability, by decreasing the porosity, the velocity profile was extended. This was mainly due to the presence of pores in the collector. With an accelerated flow, the maximum velocity of 2.5 m/s occurred at a porosity of 0.2. It was also found that in the porous collector, the Nusselt number increased where the maximum difference between the porous and the nonporous collectors occurred at the beginning of the collector, with a value of 32%, and the minimum difference was 27%. The results also indicate that in the porous collector, solar energy absorbance was higher and the heat transfer was improved. However, an increase in the pressure drop was noted in the porous collectors. Full article
(This article belongs to the Special Issue Advances in Photovoltaic/Solar Collectors and Their Potential for an Industrial Decarbonization)
►▼ Show Figures

Figure 1

Show export options expand_more Show export options expand_less
Select all
Export citation of selected articles as:
 
Displaying articles 1-4

Planned Papers

The below list represents only planned manuscripts. Some of these manuscripts have not been received by the Editorial Office yet. Papers submitted to MDPI journals are subject to peer-review.

Title: Design and implementation of microcontroller-based solar charge controller using modified incremental conductance MPPT algorithm
Authors: Mustafa Sacid Endiz
Affiliation: Necmettin Erbakan University, Engineering Faculty
Abstract: This paper presents the modeling, design, and implementation of a rapid prototyping low-power solar charge controller with maximum power point tracking (MPPT). The implemented circuit consists of a 60 W photovoltaic (PV) module, a buck converter with an MPPT controller, and a 13.5V-48Ah battery. The performance of the solar charge controller is increased by operating the PV module at the maximum power point (MPP) using a modified incremental conductance (IC) MPPT algorithm. While the traditional IC MPPT approach requires a substantial amount of code and algorithmic steps to keep the PV module at the MPP, the proposed IC achieves the same process with a reduced number of lines of code, owing to its optimized algorithmic approach. By adjusting the duty cycle of the generated Pulse Width Modulation (PWM) signal, maximum power transfer from the PV module is attained during the operation of the battery charging process. The simulation model is configured and tested in Matlab/Simulink environment under different solar data (1000 W/m2, 500 W/m2, 800 W/m2) with constant temperature (25 °C). To validate the simulations, experimental studies are conducted using the developed rapid prototype with the 32-bit embedded microcontroller in the laboratory. According to the obtained results, the proposed IC tracks the MPP more accurately with less steady-state oscillation and provides maximum available power with 98.6% average tracking efficiency for battery charging at different solar radiations compared to the traditional IC approach. For low-powered electric devices, the proposed system can be used to provide a charging infrastructure solution.

Title: A rapid prototyping low power charging unit for Modified GWO-MPPT using ANFIS
Authors: Goksel Gokkus
Affiliation: Faculty of Engineering and Architecture, Nevşehir Hacı Bektaş Veli University, Nevşehir, Turkey
Abstract: The increasing need for energy, coupled with progress in technology has emphasized the importance of renewable energy sources around the world. Solar energy systems harness the power of sunlight to generate electricity, offering a renewable and environmentally friendly alternative to conventional energy sources. Maximum Power Point Tracking (MPPT) algorithms are employed to achieve optimal efficiency from the PV systems. This paper introduces a new method for controlling Maximum Power Point (MPP) in battery charging systems using an improved Grey Wolf Optimization (IGWO) algorithm.The study includes the fast-changing climatic conditions and evaluation of IGWO, which can update itself with Adaptive neuro-fuzzy inference system (ANFIS). An analysis was performed to evaluate the behavior of the system in the laboratory environment using rapid prototyping. The proposed IGWO algorithm demonstrates an improved accuracy when compared to traditional methods in the current literature. The study aims to enhance the efficiency of MPPT control in photovoltaic (PV) systems, offering a potential solution for optimizing performance in different environmental conditions.

Back to TopTop