Multifaceted Applications of Power Electronics

A special issue of Electronics (ISSN 2079-9292). This special issue belongs to the section "Industrial Electronics".

Deadline for manuscript submissions: closed (1 August 2023) | Viewed by 9945

Special Issue Editors

1. Department of Electrical and Computer Engineering, Clemson University, Clemson, SC 29634, USA
2. Dayananda Sagar College of Engineering, Bengaluru, Karnataka, India
Interests: power systems; power electronics; smart grid; flexible AC transmission system (FACTS); power system stability; renewable energy system—PV and wind; smart inverters; power quality; distribution systems
Special Issues, Collections and Topics in MDPI journals
Department of Electrical and Computer Engineering, Clemson University, Clemson, SC 29634, USA
Interests: power distribution systems; power electronics; electric machines; adjustable speed motor drives; electric power quality monitoring; grid connected inverters; renewable energy systems - PV and wind; smart inverters; distributed generation; electronic lighting and control; hardware-in-the-loop grid simulator
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

The Guest Editors are inviting submissions for a Special Issue of Electronics on the subject area of “Multifaceted Applications of Power Electronics.” The Special Issue will focus on the current and envisioned future roles of power electronics technology associated with all domains. In recent years, the prominence of power electronics technology could be seen in different applications, such as residential, commercial, industrial, transportation, utility systems, aerospace, biomedical, and telecommunications. As a result, power electronics has gained continually increasing interest over the past few years, both in academia and industry.

This Special Issue focuses on the technological advancements in and involvement of power electronics in all domains.

Topics of interest for publication include but are not limited to:

  • Technological advancements in and involvement of power electronics in all domains;
  • Artificial intelligence, machine learning, and IoT in power electronics;
  • Power electronics in smart grid;
  • Smart inverters;
  • Digital signal processing in energy systems;
  • Power electronic converters;
  • Electric machines and drives;
  • Power-electronics-based distributed generators;
  • HVDC and FACTS devices;
  • AC and DC microgrid systems;
  • Power quality;
  • Topologies and control of power electronic converters;
    Renewable energy systems;
  • Energy storage technologies;
  • Power semiconductor devices;
  • Electric/hybrid vehicle converters and other transportation systems;
  • Industrial, commercial, and residential applications of power converters;
  • Multilevel converters;
  • Power electronics applications in power systems.

Dr. Shriram Srinivasarangan Rangarajan
Dr. E. Randolph Collins
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Electronics is an international peer-reviewed open access semimonthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2400 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • Control
  • Converters
  • Electric drives
  • Distributed generators
  • HVDC and FACTS
  • Microgrid
  • Renewable energy
  • Battery storage
  • Electric vehicle

Published Papers (4 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

19 pages, 5428 KiB  
Article
Investigations on the Modulation Strategies for Performance Improvement of a Controlled Wind Energy System
by Rajababu Durgam, Ramsha Karampuri, Shriram S. Rangarajan, Umashankar Subramaniam, E. Randolph Collins and Tomonobu Senjyu
Electronics 2022, 11(23), 3931; https://doi.org/10.3390/electronics11233931 - 28 Nov 2022
Cited by 3 | Viewed by 960
Abstract
The challenges faced in an isolated wind energy conversion system (WECS) are larger transient times, high steady-state error, and larger harmonic content. To overcome these issues, an adaptive voltage controller (AVC) along with the load current observer (LCO) could be the better proposition. [...] Read more.
The challenges faced in an isolated wind energy conversion system (WECS) are larger transient times, high steady-state error, and larger harmonic content. To overcome these issues, an adaptive voltage controller (AVC) along with the load current observer (LCO) could be the better proposition. However, the AVC and LCO, in conjunction with the conventional space vector pulse width modulation (SVPWM) technique to operate the three-phase inverter of WECS, would not be able to further improve these parameters. This paper proposes the use of the unified voltage SVPWM (UVSVPWM) technique along with the AVC and LCO, which could improve the transient behavior by about 30% as well as reduce the harmonic content of the load voltage and current by about 70% and 2%, respectively. This paper considers an isolated WECS connected to the linear load, which is operated under balanced as well as unbalanced load conditions. The proposed control technique is verified for both the balanced and unbalanced cases using MATLAB/Simulink. Full article
(This article belongs to the Special Issue Multifaceted Applications of Power Electronics)
Show Figures

Figure 1

15 pages, 3580 KiB  
Article
Feasible Evaluation and Implementation of Shunt Active Filter for Harmonic Mitigation in Induction Heating System
by Rahul Raman, Pradip Kumar Sadhu, Ritesh Kumar, Shriram Srinivasarangan Rangarajan, Umashankar Subramaniam, Edward Randolph Collins and Tomonobu Senjyu
Electronics 2022, 11(21), 3464; https://doi.org/10.3390/electronics11213464 - 26 Oct 2022
Cited by 8 | Viewed by 1721
Abstract
This paper proposes a shunt active filter (SAF) for harmonic mitigation and reactive power compensation in an induction heating (IH) system. The high-frequency switching in the resonant inverter of the IH system generates a considerable number of high-frequency harmonics. The latter flow back [...] Read more.
This paper proposes a shunt active filter (SAF) for harmonic mitigation and reactive power compensation in an induction heating (IH) system. The high-frequency switching in the resonant inverter of the IH system generates a considerable number of high-frequency harmonics. The latter flow back to the supply side and causes a wide variety of problems. The predominant ones are the deterioration of the power quality, distortion in the grid voltage, and malfunctioning of the protective equipment. These harmonics need to be attenuated as per the IEEE 519-1992 and IEEE 519-2014 standards. To overcome these problems, an SAF based on the modified version of instantaneous power theory was placed between the power supply and the IH equipment. Moreover, the proposed model could work in unbalanced and non-sinusoidal input voltage conditions, as well as dynamic conditions with changing reference currents. The feasibility of the proposed SAF-based IH system was verified by a series of simulation results and a comparative analysis of the THD of the input currents. The power quality issues were successfully addressed, which signifies the ability and effectiveness of the proposed model to mitigate the problems caused by harmonics and enhance the power factors. Full article
(This article belongs to the Special Issue Multifaceted Applications of Power Electronics)
Show Figures

Figure 1

10 pages, 1057 KiB  
Article
A Simplified Output Feedback Controller for the DC-DC Boost Power Converter
by Satyajit Chincholkar, Wentao Jiang, Chok-You Chan and Shriram S. Rangarajan
Electronics 2021, 10(4), 493; https://doi.org/10.3390/electronics10040493 - 19 Feb 2021
Cited by 18 | Viewed by 2421
Abstract
Boost-type dc-dc converters present non-minimum phase dynamic system characteristics. Therefore, controller design using only the output voltage for feedback purposes is not a very straightforward task. Even though output voltage control can be achieved using inductor current control, the implementation of such current-mode [...] Read more.
Boost-type dc-dc converters present non-minimum phase dynamic system characteristics. Therefore, controller design using only the output voltage for feedback purposes is not a very straightforward task. Even though output voltage control can be achieved using inductor current control, the implementation of such current-mode controllers may require prior knowledge of the load resistance and also demand more states such as one or more currents in feedback. In this paper, the development of a new output feedback controller for boost-type dc-dc converters is presented. The controller form is such that it avoids the possibility of saturation in the control signal due to division by zero. The basic structure of the proposed controller is firstly obtained from the expression of the open-loop control signal, and the complete controller structure is then derived to satisfy the closed-loop stability conditions. Simulation and experimental results clearly verify the ability of the control law to provide robust regulation against parameter variations. Full article
(This article belongs to the Special Issue Multifaceted Applications of Power Electronics)
Show Figures

Figure 1

21 pages, 7717 KiB  
Article
Three-Phase PWM Voltage-Source-Inverter Weight Optimization for Aircraft Application Using Deterministic Algorithm
by Adrien Voldoire, Jean-Luc Schanen, Jean-Paul Ferrieux, Alexis Derbey and Cyrille Gautier
Electronics 2020, 9(9), 1393; https://doi.org/10.3390/electronics9091393 - 28 Aug 2020
Cited by 9 | Viewed by 3510
Abstract
In this paper, a design by optimization process is used to size a 10-kW three-phase pulse width modulation (PWM) inverter for aeronautic application. The objective function is the converter weight, which has to be minimized. Sizing constraints are the efficiency, alternating current (AC) [...] Read more.
In this paper, a design by optimization process is used to size a 10-kW three-phase pulse width modulation (PWM) inverter for aeronautic application. The objective function is the converter weight, which has to be minimized. Sizing constraints are the efficiency, alternating current (AC) and direct current (DC) harmonics, and thermal constraints on all devices. A deterministic algorithm is chosen since it allows obtaining quick results and dealing with a large number of variables. All equations are analytical, in order to comply with this gradient-based optimization strategy, which imposes the derivability of the models. Several optimization results using different AC inductor solutions (iron powder and ferrite) are compared. The optimized converters were built and tested experimentally to verify their performances. Semiconductor and inductor losses were measured accurately using calorimetric test benches. The optimality of the solutions was carefully verified by changing parameters. Full article
(This article belongs to the Special Issue Multifaceted Applications of Power Electronics)
Show Figures

Figure 1

Back to TopTop