Systems & Control Engineering
A section of Electronics (ISSN 2079-9292).
Section Information
The Systems and Controls section provides the field of electrical and computer engineering a unified paradigm for designing controllers in a variety of application domains. Initially developed in the context of electrical engineering, this dynamic field has come to represent an essential enabling and supporting technology for a wide range of sectors (energy, transport, manufacturing, biology, defense, robotics …).
This section is devoted to publishing focused articles related to control aspects of electronics and engineering systems, more specifically including theoretical developments and applications of control engineering as embedded control systems, mechatronics, smart systems, power systems, electrical circuits, computer science, for the enhancement of electronics systems and processes. All submissions are subject to a peer-review process. We encourage the submission of original contributions derived from theoretical and/or application-oriented research studies.
Subject Areas
The subject areas of interest include, but are not limited to:
- modelling and control approaches
- embedded control
- control theory
- adaptive control
- optimization and optimization-based control
- system identification
- intelligent control
- learning-based approaches
- robust control
- sliding mode control
- non linear control
- observer-design
- fractional-order modelling and control
- model predictive control
- fault detection and diagnosis
- fault tolerant control
- system theory
- complex systems
- networked control systems
- multi-agent systems
- uncertain systems
- non linear systems
- hybrid and switched systems
- intelligent systems
- stochastic systems
- linear systems
- safe systems
- distributed parameter systems
- applications
- motion control
- aerospace
- sensors and actuators
- mechatronics
- autonomous and intelligent systems
- robotics
- electrical systems
- navigation and control
- human machine cooperation
- bio-engineering
- marine (underwater, surface) vehicles
- micro-systems
- smart systems
- renewable energy applications
- manufactoring systems
- cyber physical systems
- automotive systems
- industrial electronic applications
- control of networks
- control of power systems and smart grids
- connected and automated vehicles
- machines
- cooperative control
Editorial Board
Topical Advisory Panel
Special Issues
Following special issues within this section are currently open for submissions:
- Bridging the Gap between Deep Learning and Probabilistic Inference for Advancements in Robotics (Deadline: 15 May 2024)
- Nonlinear System Identification and Soft Sensor Design (Deadline: 15 May 2024)
- State-of-the-Art Research in Systems and Control Engineering (Deadline: 15 May 2024)
- Model Predictive Control: Future Trends and Advances in Motors (Deadline: 15 May 2024)
- Recent Advances in Autonomous Navigation (Deadline: 15 May 2024)
- Cyber Physical Fusion-Based Defect Perception, Fault Diagnosis, and Reliability Analytics in Power Systems (Deadline: 15 May 2024)
- Multi-Agent Systems: Planning, Perception and Control (Deadline: 15 May 2024)
- Design and Development of Digital Embedded Systems (Deadline: 20 May 2024)
- New Advances in Human-Robot Collaboration (Deadline: 1 June 2024)
- Advanced Nonlinear and Learning-Based Control Techniques for Complex Dynamical Systems, 2nd Edition (Deadline: 20 June 2024)
- Robots in Medical and Industrial Applications (Deadline: 30 June 2024)
- Emerging Theory and Applications in Fault Diagnosis and Motor Drive Control (Deadline: 15 July 2024)
- Intelligent Mobile Robotic Systems: Decision, Planning and Control (Deadline: 15 July 2024)
- New Advances in Multi-Agent Systems: Control and Modelling (Deadline: 15 July 2024)
- Advanced Control Methods and Emerging Motor Designs for Electric Propulsion Applications (Deadline: 15 July 2024)
- New Trends of Multi-agent Control (Deadline: 15 July 2024)
- Machine Learning for Multi-agent Systems (Deadline: 15 July 2024)
- Modeling, Optimization, and Automation for Complex Manufacturing System (Deadline: 15 July 2024)
- Advances in Mobile Robots: Navigation, Motion Planning and Control (Deadline: 15 July 2024)
- Communication Systems and Manipulators for Robots and Unmanned Systems (Deadline: 31 July 2024)
- Recent Advances in Modelling, Control and Navigation of Ground and Aerial Robots (Deadline: 31 July 2024)
- Multi-robot Systems: Collaboration, Control, and Path Planning (Deadline: 31 July 2024)
- Advances in Robust Control for Automated Manufacturing System (Deadline: 15 August 2024)
- Advances in Control for Permanent Magnet Synchronous Motor (PMSM) (Deadline: 15 August 2024)
- Intelligent and Dynamic Control of Mobile, Aerial, and Underwater Robots (Deadline: 15 August 2024)
- Advanced Power Converters and Drives in Smart Grid Systems (Deadline: 15 August 2024)
- Advances in Predictive Maintenance for Critical Infrastructure (Deadline: 15 August 2024)
- Advances in Control for Nonlinear Cyber–Physical Systems (Deadline: 15 August 2024)
- Advances in Data-Driven Wind Turbine Condition Monitoring (Deadline: 15 August 2024)
- Cooperative Control for Multi-Agent Systems in Target Recognition and Localization (Deadline: 15 August 2024)
- Control Systems for Autonomous Vehicles (Deadline: 16 August 2024)
- Networked Control System and Its Latest Applications (Deadline: 15 September 2024)
- Advances in Cloud Computing and IoT Systems (Deadline: 15 September 2024)
- Control and Optimization Technologies in Renewable Energy and Integrated Energy Systems (Deadline: 15 September 2024)
- Design and Control of Drives and Electrical Machines (Deadline: 15 September 2024)
- Advances in Autonomous Vehicle: Motion Planning, Trajectory Prediction and Control (Deadline: 15 September 2024)
- Deep Learning for “Intelligent” Robots (Deadline: 15 September 2024)
- Control and Applications of Intelligent Unmanned Aerial Vehicle (Deadline: 15 September 2024)
- Distributed Optimization: Challenges and Applications (Deadline: 20 September 2024)
- Electronics Technologies for Digital Transformation, Sustainable Development and Green Transition (Deadline: 15 October 2024)
- Advances in Internet of Things Sensors (Deadline: 15 October 2024)
- Automation, Operation and Maintenance of Control and Communication Systems (Volume II) (Deadline: 15 October 2024)
- Recent Advances in Robotics and Automation Systems (Deadline: 15 October 2024)
- High Performance Control and Industrial Applications (Deadline: 15 October 2024)
- Machine Intelligent Information and Efficient System (Deadline: 15 October 2024)
- Intelligence Control and Applications of Intelligence Robotics (Deadline: 20 October 2024)
- Recent Developments in Control and Optimization for Multi-Agent Systems (Deadline: 15 November 2024)
- Artificial Intelligence for Robotics (Deadline: 15 November 2024)
- Cybersecurity and Privacy Issues in Cyber-Physical Systems and Industrial Control Systems, 2nd Edition (Deadline: 15 November 2024)
- The Application of Control Systems in Robots (Deadline: 16 November 2024)
- Reliability and Resilience Analysis of UAV Systems (Deadline: 16 November 2024)
- Hardware and Software Co-optimisations for Machine Learning (Deadline: 16 November 2024)
- Securing the Future: Challenges and Prospects in Emerging Cyber‒Physical Systems (Deadline: 20 November 2024)
- Selected Papers for the 2024 4th International Conference on Autonomous Unmanned Systems (4th ICAUS 2024) (Deadline: 15 December 2024)
- Nonlinear Intelligent Control: Theory, Models, and Applications (Deadline: 15 December 2024)
- Advances in Decision Making for Complex Systems (Deadline: 15 December 2024)
- Underwater Robotics: Theory, Methods and Applications (Deadline: 15 December 2024)
- Control and Applications of Intelligent Robotic System (Deadline: 15 December 2024)
- Unmanned Aircraft Systems with Autonomous Navigation, Volume II (Deadline: 16 December 2024)
- New Insights in Multi-Agent Systems and Intelligent Control (Deadline: 31 December 2024)
- Advances in Social Bots (Deadline: 15 February 2025)
Topical Collection
Following topical collection within this section is currently open for submissions: