Inorganic Crystalline Materials
A section of Crystals (ISSN 2073-4352).
Section Information
Aims
The section “Inorganic Crystalline Materials” provides a forum for advancements in our understanding of the nucleation, growth, processing, structure and property characterizations, and emerging applications of inorganic crystalline materials. Their mechanical, chemical, electronic, magnetic, and optical properties, as well as their diverse applications, are all considered to be of importance. Additionally, we encourage contributors to send articles focused on crystals research on inorganic crystalline materials and their characterization using modern techniques for crystal growth and high-resolution characterization, such as synchrotron radiation and STEM.
Crystals serves as a reference and publication source for the crystal research community. Crystals publishes reviews, regular research articles, and short communications. Our aim is to encourage scientists to publish their experimental, theoretical, and computational results in as much detail as possible so that results can be reproduced. Therefore, there are no restrictions on article length.
Subject Areas
All classes of inorganic crystalline materials, either in bulk or thin films, such as:
- semiconductors
- magnetic systems
- superconductors
- graphene
- photonic crystals
- piezoelectric crystals
- ferroelectric crystals
- optical crystals, including nonlinear and laser crystals
- scintillating crystals
Crystal growth techniques include, but are not limited to:
- conventional crystal growth, including Bridgman, Czochralski, top seeding, solid state conversion, high temperature flux methods
- molecular beam, chemical beam, and vapor phase epitaxy, non-classical growth by particle attachment and fusion
Characterization techniques, such as:
- X-ray diffraction
- photoluminescence
- electron microscopy and diffraction
- neutron diffraction
- free electron lasers
- scanning probe microscopy
- carrier transport
- magnetic property measurements
- Rutherford backscattering
- ellipsometry
- AFM/PFM
- STEM
Property characterizations, including but not limited to optical, magnetic, electronic, etc.
- Fundamental research into:
- solid-state physics and chemistry
- crystalline surfaces
- crystalline structure
- crystalline interface
- crystallization mechanisms
Editorial Board
Special Issues
Following special issues within this section are currently open for submissions:
- Recent Advances in Topological Semimetals and Insulators (Deadline: 10 October 2023)
- Crystallography of Materials under High Pressure (Deadline: 10 October 2023)
- Synthesis, Structure, and Characterization of Metal-Organic Complexes (Deadline: 15 October 2023)
- Photonic Crystals: Physics and Applications (Deadline: 15 October 2023)
- Epitaxial Growth of Semiconductor Materials and Devices (Deadline: 15 October 2023)
- Electronic Phenomena of Transition Metal Oxides Volume II (Deadline: 20 October 2023)
- Interactions between Earth Materials and Environmental Contaminants—from Structural Aspect to Mechanistic Interpretation (Deadline: 29 October 2023)
- Metamaterials and Phononic Crystals (Deadline: 30 October 2023)
- Transparent Scintillator Ceramics: Current Progress and Perspectives (Deadline: 31 October 2023)
- Recent Advances and Discoveries in Superconductors (Deadline: 31 October 2023)
- Terahertz Metamaterials (Deadline: 31 October 2023)
- Advanced Surface Engineering Materials: Characterization and Properties (Deadline: 31 October 2023)
- Advances of Nonlinear Optical Materials (Deadline: 31 October 2023)
- A Hands-On Guide to the Synthesis of Bimetallic Catalysts (Deadline: 31 October 2023)
- Density Functional Theory (DFT) of Two-Dimensional Materials (Deadline: 31 October 2023)
- Nanocrystals for Catalysis (Deadline: 31 October 2023)
- Magnetoelectric Materials (Deadline: 20 November 2023)
- Metal Oxides /Metal Catalysts (Deadline: 20 November 2023)
- 1D and 2D Nanomaterials for Sensor Applications (Deadline: 30 November 2023)
- Tailoring of Microstructures through Additive Manufacturing (Deadline: 30 November 2023)
- Structure, Thermal and Magnetic Properties of Nanocrystalline Materials (Deadline: 30 November 2023)
- Nanocrystal Catalysts for Environmental Protection and the Development of Liquid Fuels (Deadline: 30 November 2023)
- Charge Dynamic Research on Semiconductor Materials (Deadline: 30 November 2023)
- Surface Engineering of Metallic Materials (Deadline: 30 November 2023)
- Raman Scattering in Optical Crystals (Volume II) (Deadline: 30 November 2023)
- Defects Induced by Radiation in Nuclear Materials (Deadline: 30 November 2023)
- Recent Developments in Nanoparticles for Catalysis (Deadline: 30 November 2023)
- Two-Dimensional Materials: Synthesis, Characterization and Device Applications (Deadline: 30 November 2023)
- Research on High-Temperature Superconducting Materials (Deadline: 10 December 2023)
- Frontiers in Semiconductor Heterostructures Materials (Deadline: 10 December 2023)
- Advanced Research in 2D Materials (Deadline: 10 December 2023)
- Advances in Photonic Crystals and Devices (Deadline: 10 December 2023)
- Advances in Intermetallic and Metal-Like Compounds (Deadline: 10 December 2023)
- Multifunctional Coordination Polymers: Synthesis, Structure, Properties and Applications (Deadline: 20 December 2023)
- Research on Nonlinear Optics with 2D Materials (Deadline: 20 December 2023)
- Crystals, Films and Nanocomposite Scintillators Volume III (Deadline: 20 December 2023)
- Advances in Thin Structures and Materials Modelling (Deadline: 20 December 2023)
- Recent Advances in Graphene and Other Two-Dimensional Materials (Deadline: 20 December 2023)
- Density Functional Theory (DFT) and Beyond for Crystalline Materials (Deadline: 20 December 2023)
- Micro-Structure and Mechanical Properties of Alloys (Deadline: 25 December 2023)
- Ferroelectric Materials (Deadline: 25 December 2023)
- Novelties in Solidification Techniques of Single-Crystalline Materials (Deadline: 28 December 2023)
- Aggregation-Induced Emission: Materials and Applications (Deadline: 29 December 2023)
- Porous Materials for Sustainable Energy and Catalysis (Deadline: 30 December 2023)
- Nanoengineering of Metal-Organic Frameworks and Their Derived Materials for Energy and Environmental Applications (Deadline: 31 December 2023)
- Microstructure and Mechanical Properties of CFRP Coatings (Deadline: 31 December 2023)
- Low-Dimensional Materials: Growth and Applications (Deadline: 31 December 2023)
- Fabrication and Properties of Magnetic Materials (Deadline: 31 December 2023)
- Anisotropic/ Isotropic Microstructural Design in Additive Manufacturing (Deadline: 31 December 2023)
- Spectroscopic Insights into Molecular Crystals (Deadline: 31 December 2023)
- Ferroelectric and Multiferroic Thin Films (Deadline: 31 December 2023)
- Advances in Low-Dimensional Materials for Electronics and Sensing Applications (Deadline: 31 December 2023)
- Recent Advances in Transition Metal Dichalcogenides (TMDCs) and Their Applications (Deadline: 31 December 2023)
- Mechanical Metamaterials (Deadline: 10 January 2024)
- Recent Research on Engineering Acoustic Metamaterials (Deadline: 20 January 2024)
- Design and Properties of Functional Nanocatalysts (Deadline: 31 January 2024)
- Design and Fabrication of Functional Thin Films (Deadline: 8 February 2024)
- Design, Synthesis, and Characterization of Graphene Quantum Dots (Deadline: 15 February 2024)
- Synthesis, Characterization and Application of Novel Nanoparticles (Deadline: 15 February 2024)
- Advances in Semiconductor Materials (Deadline: 20 February 2024)
- Emerging Trends in Developing Efficient Thermoelectric Materials (Deadline: 20 February 2024)
- Advances in Synthesis, Characterization, and Application of Thin Films (Deadline: 20 February 2024)
- Advanced Research of Oxide Thin Film Transistors (Deadline: 29 February 2024)
- Metal Oxides: Crystal Structure, Synthesis and Characterization (Deadline: 29 February 2024)
- Advanced Research of Graphene Oxide-Based Materials for Catalysis (Deadline: 29 February 2024)
- Synthesis, Structure and Property Analysis of Crystalline Layers (Volume II) (Deadline: 29 February 2024)
- Scintillator and Phosphor Materials—2nd Edition (Deadline: 29 February 2024)
- Photoelectric Functional Crystals (Deadline: 10 March 2024)
- Structures, Properties and Applications of Quasicrystals (Deadline: 15 March 2024)
- Additive Manufacturing of Alloys via Laser-Based Techniques (Deadline: 15 March 2024)
- Rare Earths-Doped Materials (3rd Edition) (Deadline: 20 March 2024)
- Optical and Spectroscopic Properties of Rare-Earth-Doped Crystals (2nd Edition) (Deadline: 20 March 2024)
- Structural Engineering of Low-Dimensional Materials for Desired Properties (Deadline: 20 March 2024)
- Crystals for Radiation Detectors, UV Filters and Lasers (Deadline: 20 March 2024)
- Quantum Dots: Properties and Applications (Deadline: 31 March 2024)
- Advanced Research on Carbon Nanotubes (Deadline: 31 March 2024)
- Nanomaterials: Nanostructures and Magnetic Semiconductors (Deadline: 31 March 2024)
- Hydroxyapatite and Perovskite Materials: Synthesis, Characterization, Atomistic Simulations, and Resources for Teaching the Concepts (Deadline: 31 March 2024)
- Recent Advances in Green Synthesis of Spinel-Type Composites (Deadline: 31 March 2024)
- Recent Trends in Advanced Photocatalytic Nanomaterials and Nanostructured Coatings (Deadline: 10 April 2024)
- Nondestructive Characterization and Evaluation of Crystalline Materials (Deadline: 10 April 2024)
- Microstructure and Mechanical Properties of Welding Joints (Deadline: 20 April 2024)
- Exploring the Magnetic World: Advances in Synthesis, Characterization, and Revolutionary Applications of Magnetic Nanoparticles (Deadline: 20 April 2024)
- Semiconductor Nanocrystal Studies for Optoelectronic Applications (Deadline: 30 April 2024)
- Periodic and Quasi-Periodic Structures (Deadline: 30 April 2024)
- Synthesis, Processing and Characterization of Micro- and Nanostructured Functional Materials for Advanced Applications (Deadline: 20 May 2024)
- Wide Bandgap Semiconductor: GaN and SiC Material and Device (Deadline: 30 May 2024)
- Effects of Neutron and Ion Irradiation on Nuclear Materials (Deadline: 31 May 2024)
- Laser–Material Interaction: Principles, Phenomena, and Applications (Deadline: 31 May 2024)
- Research on Thermoelectric Materials: Waste Heat into Renewable Energy (Deadline: 20 June 2024)
- Superconductors and Magnetic Materials (Deadline: 30 June 2024)
- First-Principles Studies and Electronic Structures of Nano-Scale Materials (Deadline: 30 June 2024)
- Topological Photonic Crystals (Deadline: 31 July 2024)
- Advanced Surface Modifications on Materials (Deadline: 1 September 2024)