Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al)

A special issue of Catalysts (ISSN 2073-4344). This special issue belongs to the section "Biomass Catalysis".

Deadline for manuscript submissions: closed (15 July 2020) | Viewed by 78523

Printed Edition Available!
A printed edition of this Special Issue is available here.

Special Issue Editors

Dipartimento di Chimica Industriale "Toso Montanari", Alma Mater Studiorum Università di Bologna, Viale Risorgimento 4, 40136 Bologna, Italy
Interests: metal nanoparticles; heterogeneous catalysis; nanostructured metal oxides; heteropolyacids; biomass transformation; HMF oxidation
Special Issues, Collections and Topics in MDPI journals
Dipartimento di Chimica Industriale "Toso Montanari", Alma Mater Studiorum Università di Bologna, Viale Risorgimento 4, 40136 Bologna, Italy
Interests: metal nanoparticles; heterogeneous catalysis; nanostructured metal oxides; biomass transformation; in situ and operando techniques
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

In recent decades, a wide variety of biomass-derived chemicals have emerged as key platform chemicals for the production of fine chemicals and liquid fuels. Heterogeneous catalysts are the preferred option for most of the developed and proposed catalytic processes. A range of heterogeneous catalysts have been evaluated for effective biomass conversion, such as supported metal nanoparticles, mixed metal oxides and zeolites, where the control of particle size, porosity, acid-basic and redox properties are crucial for providing active, stable and selective heterogeneous catalysts. Moreover, the crucial role of the solvent, choice of reactor design and final chemical processes for controlling activity, selectivity and deactivation phenomena has been demonstrated.

We invite the scientific community to submit their contributions in the form of original research articles and review articles that could seek an excellent interaction between solid catalysts and their applications in biomass transformation on selected topics. We are particularly interested in articles describing:

1) Furfural transformation
2) HMF transformation
3) Bioethanol production from biomass
4) Olefin production from biomass-derived molecules
5) Deactivation studies using in situ and ex situ spectroscopic techniques
6) Computational modeling and simulation of biomass-derived processes

Dr. Nikolaos Dimitratos
Prof. Dr. Stefania Albonetti
Dr. Tommaso Tabanelli
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Catalysts is an international peer-reviewed open access monthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2700 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • Biomass transformation
  • Fine chemicals and fuels
  • Heterogeneous catalysts
  • Deactivation studies
  • In situ/operando studies

Published Papers (16 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Editorial

Jump to: Research, Review

3 pages, 182 KiB  
Editorial
Catalytic Transformation of Renewables (Olefin, Bio-Sourced, et al.)
by Nikolaos Dimitratos, Stefania Albonetti and Tommaso Tabanelli
Catalysts 2021, 11(3), 364; https://doi.org/10.3390/catal11030364 - 10 Mar 2021
Viewed by 1191
Abstract
The objective of this Special Issue is to provide new diverse contributions that can demonstrate recent applications in biomass transformation using heterogeneous catalysts [...] Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))

Research

Jump to: Editorial, Review

20 pages, 4735 KiB  
Article
Oxidative Condensation of Furfural with Ethanol Using Pd-Based Catalysts: Influence of the Support
by Juan Antonio Cecilia, Carmen Pilar Jiménez-Gómez, Virginia Torres-Bujalance, Cristina García-Sancho, Ramón Moreno-Tost and Pedro Maireles-Torres
Catalysts 2020, 10(11), 1309; https://doi.org/10.3390/catal10111309 - 12 Nov 2020
Cited by 7 | Viewed by 1811
Abstract
PdO nanoparticles were deposited on several supports (β-zeolite, Al2O3, Fe2O3, MgO, and SiO2), which displayed different crystallinity, textural properties, and amount of acid and basic sites. These catalysts were characterized by X-ray diffraction [...] Read more.
PdO nanoparticles were deposited on several supports (β-zeolite, Al2O3, Fe2O3, MgO, and SiO2), which displayed different crystallinity, textural properties, and amount of acid and basic sites. These catalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N2 adsorption–desorption isotherms at −196 °C, NH3 and CO2 thermoprogrammed desorption analyses (NH3- and CO2-TPD, and X-ray photoelectron spectroscopy (XPS). Pd-based catalysts were tested in the oxidative condensation of furfural with ethanol to obtain value-added chemicals. The catalytic results revealed high conversion values, although the presence of a high proportion of carbonaceous deposits, mainly in the case of the PdO supported on β-zeolite and Al2O3, is also noteworthy. The presence of basic sites led to a beneficial effect on the catalytic behavior, since the formation of carbonaceous deposits was minimized. Thus, the 2Pd-MgO (2 wt.% Pd) catalyst reached the highest yield of furan-2-acrolein (70%) after 3 h of reaction at 170 °C. This better catalytic performance can be explained by the high basicity of MgO, used as support, together with the large amount of available PdO, as inferred from XPS. Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))
Show Figures

Figure 1

12 pages, 3376 KiB  
Article
In Situ Synthesis of Sn-Beta Zeolite Nanocrystals for Glucose to Hydroxymethylfurfural (HMF)
by Kachaporn Saenluang, Anawat Thivasasith, Pannida Dugkhuntod, Peerapol Pornsetmetakul, Saros Salakhum, Supawadee Namuangruk and Chularat Wattanakit
Catalysts 2020, 10(11), 1249; https://doi.org/10.3390/catal10111249 - 28 Oct 2020
Cited by 25 | Viewed by 3727
Abstract
The Sn substituted Beta nanocrystals have been successfully synthesized by in-situ hydrothermal process with the aid of cyclic diquaternary ammonium (CDM) as the structure-directing agent (SDA). This catalyst exhibits a bifunctional catalytic capability for the conversion of glucose to hydroxymethylfurfural (HMF). The incorporated [...] Read more.
The Sn substituted Beta nanocrystals have been successfully synthesized by in-situ hydrothermal process with the aid of cyclic diquaternary ammonium (CDM) as the structure-directing agent (SDA). This catalyst exhibits a bifunctional catalytic capability for the conversion of glucose to hydroxymethylfurfural (HMF). The incorporated Sn acting as Lewis acid sites can catalyze the isomerization of glucose to fructose. Subsequently, the Brønsted acid function can convert fructose to HMF via dehydration. The effects of Sn amount, zeolite type, reaction time, reaction temperature, and solvent on the catalytic performances of glucose to HMF, were also investigated in the detail. Interestingly, the conversion of glucose and the HMF yield over 0.4 wt% Sn-Beta zeolite nanocrystals using dioxane/water as a solvent at 120 °C for 24 h are 98.4% and 42.0%, respectively. This example illustrates the benefit of the in-situ synthesized Sn-Beta zeolite nanocrystals in the potential application in the field of biomass conversion. Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))
Show Figures

Figure 1

13 pages, 1775 KiB  
Article
The Influence of the Gold Particle Size on the Catalytic Oxidation of 5-(Hydroxymethyl)furfural
by Oliver Schade, Paolo Dolcet, Alexei Nefedov, Xiaohui Huang, Erisa Saraçi, Christof Wöll and Jan-Dierk Grunwaldt
Catalysts 2020, 10(3), 342; https://doi.org/10.3390/catal10030342 - 19 Mar 2020
Cited by 20 | Viewed by 4056
Abstract
For the production of chemicals from biomass, new selective processes are required. The selective oxidation of 5-(Hydroxymethyl)furfural (HMF), a promising platform molecule in fine chemistry, to 2,5-furandicarboxylic acid (FDCA) is considered a promising approach and requires the oxidation of two functional groups. In [...] Read more.
For the production of chemicals from biomass, new selective processes are required. The selective oxidation of 5-(Hydroxymethyl)furfural (HMF), a promising platform molecule in fine chemistry, to 2,5-furandicarboxylic acid (FDCA) is considered a promising approach and requires the oxidation of two functional groups. In this study, Au/ZrO2 catalysts with different mean particle sizes were prepared by a chemical reduction method using tetrakis(hydroxymethyl)phosphonium chloride (THPC) and tested in HMF oxidation. The catalyst with the smallest mean particle size (2.1 nm) and the narrowest particle size distribution was highly active in the oxidation of the aldehyde moiety of HMF, but less active in alcohol oxidation. On the other hand, increased activity in FDCA synthesis up to 92% yield was observed over catalysts with a larger mean particle size (2.7 nm), which had a large fraction of small and some larger particles. A decreasing FDCA yield over the catalyst with the largest mean particle size (2.9 nm) indicates that the oxidation of both functional groups require different particle sizes and hint at the presence of an optimal particle size for both oxidation steps. The activity of Au particles seems to be influenced by surface steps and H bonding strength, the latter particularly in aldehyde oxidation. Therefore, the presence of both small and some larger Au particles seem to give catalysts with the highest catalytic activity. Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))
Show Figures

Graphical abstract

15 pages, 1686 KiB  
Article
Autocatalytic Fractionation of Wood Hemicelluloses: Modeling of Multistage Operation
by Mar López, Valentín Santos and Juan Carlos Parajó
Catalysts 2020, 10(3), 337; https://doi.org/10.3390/catal10030337 - 17 Mar 2020
Cited by 3 | Viewed by 2291
Abstract
Eucalyptus globulus wood samples were treated with hot, compressed water (autohydrolysis) in consecutive stages under non-isothermal conditions in order to convert the hemicellulose fraction into soluble compounds through reactions catalyzed by in situ generated acids. The first stage was a conventional autohydrolysis, and [...] Read more.
Eucalyptus globulus wood samples were treated with hot, compressed water (autohydrolysis) in consecutive stages under non-isothermal conditions in order to convert the hemicellulose fraction into soluble compounds through reactions catalyzed by in situ generated acids. The first stage was a conventional autohydrolysis, and liquid phase obtained under conditions leading to an optimal recovery of soluble saccharides was employed in a new reaction (second crossflow stage) using a fresh wood lot, in order to increase the concentrations of soluble saccharides. In the third crossflow stage, the best liquid phase from the second stage was employed to solubilize the hemicelluloses from a fresh wood lot. The concentration profiles determined for the soluble saccharides, acids, and furans present in the liquid phases from the diverse crossflow stages were employed for kinetic modeling, based on pseudohomogeneous reactions and Arrhenius-type dependence of the kinetic coefficients on temperature. Additional characterization of the reaction products by High Pressure Size Exclusion Chromatography, High Performance Anion Exchange Chromatography with Pulsed Amperometric Detection, and Matrix Assisted Laser Desorption/Ionization Time of Flight Mass Spectrometry provided further insight on the properties of the soluble saccharides present in the various reaction media. Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))
Show Figures

Figure 1

16 pages, 4051 KiB  
Article
5-Hydroxymethylfurfural and Furfural Base-Free Oxidation over AuPd Embedded Bimetallic Nanoparticles
by Camila P. Ferraz, Natalia J. S. Costa, Erico Teixeira-Neto, Ângela A. Teixeira-Neto, Cleber W. Liria, Joëlle Thuriot-Roukos, M. Teresa Machini, Rénato Froidevaux, Franck Dumeignil, Liane M. Rossi and Robert Wojcieszak
Catalysts 2020, 10(1), 75; https://doi.org/10.3390/catal10010075 - 04 Jan 2020
Cited by 15 | Viewed by 3697
Abstract
The heterogeneous catalytic partial oxidation of alcohols and aldehydes in the liquid phase usually needs the addition of a homogeneous base, which in turn makes the products’ recovery cumbersome, and can further induce undesired side reactions. In the present work, we propose the [...] Read more.
The heterogeneous catalytic partial oxidation of alcohols and aldehydes in the liquid phase usually needs the addition of a homogeneous base, which in turn makes the products’ recovery cumbersome, and can further induce undesired side reactions. In the present work, we propose the use of novel catalysts based on metallic Au, Pd and bimetallic AuPd nanoparticles embedded in a titanosilicate matrix. The as-prepared catalysts showed good efficiency in the base-free partial oxidation of furfural and 5-hydroxymethylfurfural. Au4Pd1@SiTi catalyst showed high selectivity (78%) to monoacids (namely, 5-formyl-2-furancarboxylic acid and 5-hydroxymethyl-2-furancarboxylic acid) at 50% 5-hydroxymethylfurfural (HMF) conversion. The selectivity even reached 83% in the case of furfural oxidation to furoic acid (at 50% furfural conversion). The performances of the catalysts strongly depended on the Au–Pd ratio, with an optimal value of 4:1. The pH of the solution was always below 3.5 and no leaching of metals was observed, confirming the stabilization of the metal nanoparticles within the titanosilicate host matrix. Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))
Show Figures

Graphical abstract

12 pages, 2586 KiB  
Article
Liquid Phase Furfural Oxidation under Uncontrolled pH in Batch and Flow Conditions: The Role of In Situ Formed Base
by Alessandra Roselli, Yuri Carvalho, Franck Dumeignil, Fabrizio Cavani, Sébastien Paul and Robert Wojcieszak
Catalysts 2020, 10(1), 73; https://doi.org/10.3390/catal10010073 - 03 Jan 2020
Cited by 22 | Viewed by 4331
Abstract
Selective oxidation of furfural to furoic acid was performed with pure oxygen in aqueous phase under mild conditions and uncontrolled pH using hydrotalcite-supported gold nanoparticles as catalyst. Hydrotalcites with different Mg: Al ratios were tested as support. The effects of reaction time, temperature [...] Read more.
Selective oxidation of furfural to furoic acid was performed with pure oxygen in aqueous phase under mild conditions and uncontrolled pH using hydrotalcite-supported gold nanoparticles as catalyst. Hydrotalcites with different Mg: Al ratios were tested as support. The effects of reaction time, temperature and furfural/catalyst ratio were evaluated. The catalyst Au/HT 4:1 showed the highest activity and selectivity to the desired product, achieving a complete conversion of furfural to furoic acid after 2 h at 110 °C. Further, stability tests were carried out in a continuous stirred-tank reactor and a progressive deactivation of the catalyst due to the leaching of Mg2+ cations from the support inducing changes in the pH of the reaction medium was observed. Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))
Show Figures

Graphical abstract

16 pages, 4644 KiB  
Article
Capping Agent Effect on Pd-Supported Nanoparticles in the Hydrogenation of Furfural
by Shahram Alijani, Sofia Capelli, Stefano Cattaneo, Marco Schiavoni, Claudio Evangelisti, Khaled M. H. Mohammed, Peter P. Wells, Francesca Tessore and Alberto Villa
Catalysts 2020, 10(1), 11; https://doi.org/10.3390/catal10010011 - 19 Dec 2019
Cited by 27 | Viewed by 4350
Abstract
The catalytic performance of a series of 1 wt % Pd/C catalysts prepared by the sol-immobilization method has been studied in the liquid-phase hydrogenation of furfural. The temperature range studied was 25–75 °C, keeping the H2 pressure constant at 5 bar. The [...] Read more.
The catalytic performance of a series of 1 wt % Pd/C catalysts prepared by the sol-immobilization method has been studied in the liquid-phase hydrogenation of furfural. The temperature range studied was 25–75 °C, keeping the H2 pressure constant at 5 bar. The effect of the catalyst preparation using different capping agents containing oxygen or nitrogen groups was assessed. Polyvinyl alcohol (PVA), polyvinylpyrrolidone (PVP), and poly (diallyldimethylammonium chloride) (PDDA) were chosen. The catalysts were characterized by ultraviolet-visible spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The characterization data suggest that the different capping agents affected the initial activity of the catalysts by adjusting the available Pd surface sites, without producing a significant change in the Pd particle size. The different activity of the three catalysts followed the trend: PdPVA/C > PdPDDA/C > PdPVP/C. In terms of selectivity to furfuryl alcohol, the opposite trend has been observed: PdPVP/C > PdPDDA/C > PdPVA/C. The different reactivity has been ascribed to the different shielding effect of the three ligands used; they influence the adsorption of the reactant on Pd active sites. Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))
Show Figures

Figure 1

21 pages, 1888 KiB  
Article
First-Principles-Based Simulation of an Industrial Ethanol Dehydration Reactor
by Kristof Van der Borght, Konstantinos Alexopoulos, Kenneth Toch, Joris W. Thybaut, Guy B. Marin and Vladimir V. Galvita
Catalysts 2019, 9(11), 921; https://doi.org/10.3390/catal9110921 - 05 Nov 2019
Cited by 6 | Viewed by 4132
Abstract
The achievement of new economically viable chemical processes often involves the translation of observed lab-scale phenomena into performance in an industrial reactor. In this work, the in silico design and optimization of an industrial ethanol dehydration reactor were performed, employing a multiscale model [...] Read more.
The achievement of new economically viable chemical processes often involves the translation of observed lab-scale phenomena into performance in an industrial reactor. In this work, the in silico design and optimization of an industrial ethanol dehydration reactor were performed, employing a multiscale model ranging from nano-, over micro-, to macroscale. The intrinsic kinetics of the elementary steps was quantified through ab initio obtained rate and equilibrium coefficients. Heat and mass transfer limitations for the industrial design case were assessed via literature correlations. The industrial reactor model developed indicated that it is not beneficial to utilize feeds with high ethanol content, as they result in lower ethanol conversion and ethene yield. Furthermore, a more pronounced temperature drop over the reactor was simulated. It is preferred to use a more H2O-diluted feed for the operation of an industrial ethanol dehydration reactor. Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))
Show Figures

Graphical abstract

16 pages, 4551 KiB  
Article
Tandem Hydrogenation/Hydrogenolysis of Furfural to 2-Methylfuran over a Fe/Mg/O Catalyst: Structure–Activity Relationship
by Carlo Lucarelli, Danilo Bonincontro, Yu Zhang, Lorenzo Grazia, Marc Renom-Carrasco, Chloé Thieuleux, Elsje Alessandra Quadrelli, Nikolaos Dimitratos, Fabrizio Cavani and Stefania Albonetti
Catalysts 2019, 9(11), 895; https://doi.org/10.3390/catal9110895 - 27 Oct 2019
Cited by 18 | Viewed by 4879
Abstract
The hydrodeoxygenation of furfural (FU) was investigated over Fe-containing MgO catalysts, on a continuous gas flow reactor, using methanol as a hydrogen donor. Catalysts were prepared either by coprecipitation or impregnation methods, with different Fe/Mg atomic ratios. The main product was 2-methylfuran (MFU), [...] Read more.
The hydrodeoxygenation of furfural (FU) was investigated over Fe-containing MgO catalysts, on a continuous gas flow reactor, using methanol as a hydrogen donor. Catalysts were prepared either by coprecipitation or impregnation methods, with different Fe/Mg atomic ratios. The main product was 2-methylfuran (MFU), an important highly added value chemical, up to 92% selectivity. The catalyst design helped our understanding of the impact of acid/base properties and the nature of iron species in terms of catalytic performance. In particular, the addition of iron on the surface of the basic oxide led to (i) the increase of Lewis acid sites, (ii) the increase of the dehydrogenation capacity of the presented catalytic system, and (iii) to the significant enhancement of the FU conversion to MFU. FTIR studies, using methanol as the chosen probe molecule, indicated that, at the low temperature regime, the process follows the typical hydrogen transfer reduction, but at the high temperature regime, methanol dehydrogenation and methanol disproportionation were both presented, whereas iron oxide promoted methanol transfer. FTIR studies were performed using furfural and furfuryl alcohol as probe molecules. These studies indicated that furfuryl alcohol activation is the rate-determining step for methyl furan formation. Our experimental results clearly demonstrate that the nature of iron oxide is critical in the efficient hydrodeoxygenation of furfural to methyl furan and provides insights toward the rational design of catalysts toward C–O bonds’ hydrodeoxygenation in the production of fuel components. Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))
Show Figures

Graphical abstract

16 pages, 4645 KiB  
Article
One-Pot Catalytic Conversion of Cellobiose to Sorbitol over Nickel Phosphides Supported on MCM-41 and Al-MCM-41
by Wipark Anutrasakda, Kanyanok Eiamsantipaisarn, Duangkamon Jiraroj, Apakorn Phasuk, Thawatchai Tuntulani, Haichao Liu and Duangamol Nuntasri Tungasmita
Catalysts 2019, 9(1), 92; https://doi.org/10.3390/catal9010092 - 16 Jan 2019
Cited by 12 | Viewed by 4192
Abstract
MCM-41- and Al-MCM-41-supported nickel phosphide nanomaterials were synthesized at two different initial molar ratios of Ni/P: 10:2 and 10:3 and were tested as heterogeneous catalysts for the one-pot conversion of cellobiose to sorbitol. The catalysts were characterized by X-ray diffractometer (XRD), N2 adsorption-desorption, [...] Read more.
MCM-41- and Al-MCM-41-supported nickel phosphide nanomaterials were synthesized at two different initial molar ratios of Ni/P: 10:2 and 10:3 and were tested as heterogeneous catalysts for the one-pot conversion of cellobiose to sorbitol. The catalysts were characterized by X-ray diffractometer (XRD), N2 adsorption-desorption, scanning electron microscope (SEM), transmission electron microscope (TEM), 27Al-magnetic angle spinning-nuclear magnetic resonance spectrometer (27Al MAS-NMR), temperature programmed desorption of ammonia (NH3-TPD), temperature-programmed reduction (H2-TPR), and inductively coupled plasma optical emission spectrophotometer (ICP-OES). The characterization indicated that nickel phosphide nanoparticles were successfully incorporated into both supports without destroying their hexagonal framework structures, that the catalysts contained some or all of the following Ni-containing phases: Ni0, Ni3P, and Ni12P5, and that the types and relative amounts of Ni-containing phases present in each catalyst were largely determined by the initial molar ratio of Ni/P as well as the type of support used. For cellobiose conversion at 150 °C for 3 h under 4 MPa of H2, all catalysts showed similarly high conversion of cellobiose (89.5–95.0%). Nevertheless, sorbitol yield was highly correlated to the relative amount of phases with higher content of phosphorus present in the catalysts, giving the following order of catalytic performance of the Ni-containing phases: Ni12P5 > Ni3P > Ni. Increasing the reaction temperature from 150 °C to 180 °C also led to an improvement in sorbitol yield (from 43.5% to 87.8%). Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))
Show Figures

Graphical abstract

13 pages, 1200 KiB  
Article
Selective Synthesis of Furfuryl Alcohol from Biomass-Derived Furfural Using Immobilized Yeast Cells
by Xue-Ying Zhang, Zhong-Hua Xu, Min-Hua Zong, Chuan-Fu Wang and Ning Li
Catalysts 2019, 9(1), 70; https://doi.org/10.3390/catal9010070 - 10 Jan 2019
Cited by 26 | Viewed by 4088
Abstract
Furfuryl alcohol (FA) is an important building block in polymer, food, and pharmaceutical industries. In this work, we reported the biocatalytic reduction of furfural, one of the top value-added bio-based platform chemicals, to FA by immobilized Meyerozyma guilliermondii SC1103 cells. The biocatalytic process [...] Read more.
Furfuryl alcohol (FA) is an important building block in polymer, food, and pharmaceutical industries. In this work, we reported the biocatalytic reduction of furfural, one of the top value-added bio-based platform chemicals, to FA by immobilized Meyerozyma guilliermondii SC1103 cells. The biocatalytic process was optimized, and the tolerance of this yeast strain toward toxic furfural was evaluated. It was found that furfural of 200 mM could be reduced smoothly to the desired product FA with the conversion of 98% and the selectivity of >98%, while the FA yield was only approximately 81%. The gap between the substrate conversion and the product yield might partially be attributed to the substantial adsorption of the immobilization material (calcium alginate) toward the desired product, but microbial metabolism of furans (as carbon sources) made a negligible contribution to it. In addition, FA of approximately 156 mM was produced within 7 h in a scale-up reaction, along with the formation of trace 2-furoic acid (1 mM) as the byproduct. The FA productivity was up to 2.9 g/L/h, the highest value ever reported in the biocatalytic synthesis of FA. The crude FA was simply separated from the reaction mixture by organic solvent extraction, with the recovery of 90% and the purity of 88%. FA as high as 266 mM was produced by using a fed-batch strategy within 15.5 h. Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))
Show Figures

Graphical abstract

14 pages, 11607 KiB  
Article
A Comparative Study of MFI Zeolite Derived from Different Silica Sources: Synthesis, Characterization and Catalytic Performance
by Jianguang Zhang, Xiangping Li, Juping Liu and Chuanbin Wang
Catalysts 2019, 9(1), 13; https://doi.org/10.3390/catal9010013 - 26 Dec 2018
Cited by 28 | Viewed by 5563
Abstract
In this paper, a comparative study of MFI zeolite derived from different silica sources is presented. Dry gel conversion (DGC) method is used to synthesize silicalite-1 and ZSM-5 with MFI structure. Two kinds of silica sources with different particle sizes are used during [...] Read more.
In this paper, a comparative study of MFI zeolite derived from different silica sources is presented. Dry gel conversion (DGC) method is used to synthesize silicalite-1 and ZSM-5 with MFI structure. Two kinds of silica sources with different particle sizes are used during the synthesis of MFI zeolite. The as-prepared samples were characterized by X-ray diffraction (XRD), N2-sorption, Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM) and X-ray fluorescence spectrometer (XRF). From the characterization results, it could be seen that the high-quality coffin-like silicalite-1 was synthesized using silica sphere with particle size of 300 nm as silica source, with crystallization time being shortened to 2 h. The schematic diagram of silicalite-1 formation using silica sources with different particle sizes is summarized. ZSM-5 was obtained by adding Al atoms to raw materials during the synthesis of MFI zeolite. The performance of aqueous phase eugenol hydrodeoxygenation over Pd/C-ZSM-5 catalyst is evaluated. Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))
Show Figures

Graphical abstract

11 pages, 5010 KiB  
Article
The Influence of Texture on Co/SBA–15 Catalyst Performance for Fischer–Tropsch Synthesis
by Jun Han, Zijiang Xiong, Zelin Zhang, Hongjie Zhang, Peng Zhou and Fei Yu
Catalysts 2018, 8(12), 661; https://doi.org/10.3390/catal8120661 - 16 Dec 2018
Cited by 7 | Viewed by 3468 | Retraction
Abstract
The influence of the Co/SBA–15 catalyst texture, such as pore size and pore length on Fischer–Tropsch (FT) Synthesis, was investigated in this paper. The morphology, structure, and microstructures of Co/SBA–15 catalysts were characterized by SEM, Brunauer–Emmett–Teller (BET), TPR, HRTEM, and XRD. The experimental [...] Read more.
The influence of the Co/SBA–15 catalyst texture, such as pore size and pore length on Fischer–Tropsch (FT) Synthesis, was investigated in this paper. The morphology, structure, and microstructures of Co/SBA–15 catalysts were characterized by SEM, Brunauer–Emmett–Teller (BET), TPR, HRTEM, and XRD. The experimental results indicated that the increase of pore size could improve the activity of the Co/SBA–15 catalyst, and the further increase of pore size could not significantly promote the activity. Moreover, it was also found that the pore length of the Co/SBA–15 catalyst played a key role in the catalytic activity. CO2 and C4+ selectivity were 2.0% and 74% during the simulated syngas (64% H2: 32% CO: balanced N2) FT over the Co/SBA–15 catalysts, and CO conversion rate and CH4 selectivity were 10.8% and 15.7% after 100 h time on stream. Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))
Show Figures

Figure 1

12 pages, 3589 KiB  
Article
MPV Reduction of Furfural to Furfuryl Alcohol on Mg, Zr, Ti, Zr–Ti, and Mg–Ti Solids: Influence of Acid–Base Properties
by Jesús Hidalgo-Carrillo, Almudena Parejas, Manuel Jorge Cuesta-Rioboo, Alberto Marinas and Francisco José Urbano
Catalysts 2018, 8(11), 539; https://doi.org/10.3390/catal8110539 - 13 Nov 2018
Cited by 14 | Viewed by 4289
Abstract
The Meerwein–Ponndorf–Verley (MPV) reaction is an environmentally-friendly process consisting of the reduction of a carbonyl compound through hydrogen transfer from a secondary alcohol. This work deals with MPV reduction of furfural to furfuryl alcohol on different ZrOx, MgOx, TiO [...] Read more.
The Meerwein–Ponndorf–Verley (MPV) reaction is an environmentally-friendly process consisting of the reduction of a carbonyl compound through hydrogen transfer from a secondary alcohol. This work deals with MPV reduction of furfural to furfuryl alcohol on different ZrOx, MgOx, TiOx, and Mg–Ti, as well as Zr–Ti mixed systems. The solids were synthesized through the sol–gel process and subsequently calcined at 200 °C. Characterization was performed using a wide range of techniques: ICP-MS, N2 adsorption-desorption isotherms, EDX, TGA-DTA, XRD, XPS, TEM, TPD of pre-adsorbed pyridine (acidity) and CO2 (basicity), DRIFT of adsorbed pyridine, and methylbutynol (MBOH) test reaction. ZrOx showed the highest conversion and selectivity values, which was attributed to the existence of acid–base pair sites (as evidenced by the MBOH test reaction), whereas the introduction of titanium resulted in the drop of both conversion and selectivity probably due to the increase in Brönsted-type acidity. As for MgOx, it had a predominantly basic character that led to the production of the condensation product of one molecule of furfural and one molecule of acetone, and thus resulted in a lower selectivity to furfuryl alcohol. The TiOx solid was found to be mainly acidic and exhibited both Lewis and Brönsted acid sites. The presence of the latter could account for the lower selectivity to furfuryl alcohol. All in all, these results seemed to suggest that the MPV reaction is favored on Lewis acid sites and especially on acid–base pair sites. The process was accelerated under microwave irradiation. Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))
Show Figures

Figure 1

Review

Jump to: Editorial, Research

21 pages, 16049 KiB  
Review
Zeolites as Acid/Basic Solid Catalysts: Recent Synthetic Developments
by Valentina Verdoliva, Michele Saviano and Stefania De Luca
Catalysts 2019, 9(3), 248; https://doi.org/10.3390/catal9030248 - 08 Mar 2019
Cited by 62 | Viewed by 21293 | Correction
Abstract
The zeolites are porous solid structures characterized by a particular framework of aluminosilicates, in which the incorporation of the Al+3 ions generates an excess of negative charge compensated by cations (usually alkali or alkali earth) or protons. In the latter case, they [...] Read more.
The zeolites are porous solid structures characterized by a particular framework of aluminosilicates, in which the incorporation of the Al+3 ions generates an excess of negative charge compensated by cations (usually alkali or alkali earth) or protons. In the latter case, they are employed as catalysts for a wide variety of reactions, such as dehydration, skeletal isomerization and cracking, while the catalytic activity of basic zeolites has not found, up to now, any industrial or whatever relevant application in chemical processes. In the present review, we firstly intend to give an overview of the fundamental chemical composition, as well as the structural features of the zeolite framework. The purpose of this paper is to analyze their key properties as acid, both Lewis and Brønsted, and basic solid support. Their application as catalysts is discussed by reviewing the already published works in that field, and a final remark of their still unexplored potential as green, mild, and selective catalyst is also reported. Full article
(This article belongs to the Special Issue Catalytic Transformation of Renewables (Olefin, Bio-sourced, et. al))
Show Figures

Figure 1

Back to TopTop