Commemorative Issue in Honor of Professor Emeritus Calvin H. Bartholomew in Anticipation of His 75th Birthday

A special issue of Catalysts (ISSN 2073-4344). This special issue belongs to the section "Catalytic Materials".

Deadline for manuscript submissions: closed (31 December 2017) | Viewed by 54592

Printed Edition Available!
A printed edition of this Special Issue is available here.

Special Issue Editor

Chemical Engineering Department, Brigham Young University, Provo, UT 84602, USA
Interests: heterogeneous catalysis; energy engineering; plasma reactions; coal gasification; carbon dioxide capture and storage
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

Our journal is pleased to publish a commemorative issue in honor of Professor Emeritus Calvin H. Bartholomew in anticipation of his 75th birthday.
Calvin H. Bartholomew is the Professor Emeritus of Chemical Engineering at Brigham Young University (BYU). He received his BES degree from BYU and his PhD at Stanford University, where his advisor was Michel Boudart. Professor Bartholomew has taught and mentored students at BYU in catalysis, materials, and catalyst deactivation for 42 years. He is an active researcher in heterogeneous catalysis and a recognized authority on Fischer-Tropsch and catalyst deactivation; he has co-authored over 140 journal articles, 20 chapters/reviews, 6 books, and 6 patents. His works have received in excess of 7200 citations and their h-factor is 43. He is co-author, with Dr. Robert Farrauto, of Engelhard of Fundamentals of Industrial Catalytic Processes, a leading handbook and textbook. He has developed and taught short courses on “Heterogeneous Catalysis”, “Fischer Tropsch Synthesis”, and “Catalyst Deactivation” to more than 750 professionals from industry and academe. He has worked at Corning Inc., UnoCal, and Sandia National Labs and consulted with more than 75 company clients. He has consulted with a dozen plus start-up GTL companies and has been the principal motivator for the development of advanced supports and Fischer-Tropsch catalysts at Cosmas Inc.
In honor and recognition of Professor Bartholomew’s outstanding career contributions to the field of heterogeneous catalysis and in anticipation of his 75th birthday in 2018, this commemorative issue of Catalysts welcomes the submission of previously unpublished manuscripts from original work or reviews in the field of catalysis. We plan to receive submissions from 1 October 2016 to 31 December 2017 and manuscripts will be published online on an ongoing basis after being processed.

Assoc. Prof. Morris D. Argyle
Guest Editor

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Catalysts is an international peer-reviewed open access monthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2700 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Related Special Issue

Published Papers (10 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Editorial

Jump to: Research

4 pages, 769 KiB  
Editorial
Commemorative Issue in Honor of Professor Calvin H. Bartholomew’s 75th Birthday
by Morris D. Argyle
Catalysts 2018, 8(11), 533; https://doi.org/10.3390/catal8110533 - 09 Nov 2018
Viewed by 2181
Abstract
This editorial is written to recognize Professor Emeritus Calvin H. Bartholomew, who celebrated his 75th birthday in 2018, and to introduce the commemorative issue of Catalysts compiled in his honor. Following a brief biography that celebrates the career and contributions of Professor Bartholomew, [...] Read more.
This editorial is written to recognize Professor Emeritus Calvin H. Bartholomew, who celebrated his 75th birthday in 2018, and to introduce the commemorative issue of Catalysts compiled in his honor. Following a brief biography that celebrates the career and contributions of Professor Bartholomew, the nine articles that make up the special issue are briefly reviewed. Dr. Bartholomew is an eminent researcher, an outstanding educator, mentor, and friend. Full article
Show Figures

Figure 1

Research

Jump to: Editorial

17 pages, 3581 KiB  
Article
Effect of Support Pretreatment Temperature on the Performance of an Iron Fischer–Tropsch Catalyst Supported on Silica-Stabilized Alumina
by Kamyar Keyvanloo, Baiyu Huang, Trent Okeson, Hussein H. Hamdeh and William C. Hecker
Catalysts 2018, 8(2), 77; https://doi.org/10.3390/catal8020077 - 12 Feb 2018
Cited by 16 | Viewed by 4546
Abstract
The effect of support material pretreatment temperature, prior to adding the active phase and promoters, on Fischer–Tropsch activity and selectivity was explored. Four iron catalysts were prepared on silica-stabilized alumina (AlSi) supports pretreated at 700 °C, 900 °C, 1100 °C or 1200 °C. [...] Read more.
The effect of support material pretreatment temperature, prior to adding the active phase and promoters, on Fischer–Tropsch activity and selectivity was explored. Four iron catalysts were prepared on silica-stabilized alumina (AlSi) supports pretreated at 700 °C, 900 °C, 1100 °C or 1200 °C. Addition of 5% silica to alumina made the AlSi material hydrothermally stable, which enabled the unusually high support pretreatment temperatures (>900 °C) to be studied. High-temperature dehydroxylation of the AlSi before impregnation greatly reduces FeO·Al2O3 surface spinel formation by removing most of the support-surface hydroxyl groups leading to more effectively carbided catalyst. The activity increases more than four-fold for the support calcined at elevated temperatures (1100–1200 °C) compared with traditional support calcination temperatures of <900 °C. This unique pretreatment also facilitates the formation of ε′-Fe2.2C rather than χ-Fe2.5C on the AlSi support, which shows an excellent correlation with catalyst productivity. Full article
Show Figures

Graphical abstract

20 pages, 6047 KiB  
Article
In Situ UV-Visible Assessment of Iron-Based High-Temperature Water-Gas Shift Catalysts Promoted with Lanthana: An Extent of Reduction Study
by Basseem B. Hallac, Jared C. Brown, Eli Stavitski, Roger G. Harrison and Morris D. Argyle
Catalysts 2018, 8(2), 63; https://doi.org/10.3390/catal8020063 - 04 Feb 2018
Cited by 8 | Viewed by 4609
Abstract
The extent of reduction of unsupported iron-based high-temperature water-gas shift catalysts with small (<5 wt %) lanthana contents was studied using UV-visible spectroscopy. Temperature- programmed reduction measurements showed that lanthana content higher than 0.5 wt % increased the extent of reduction to metallic [...] Read more.
The extent of reduction of unsupported iron-based high-temperature water-gas shift catalysts with small (<5 wt %) lanthana contents was studied using UV-visible spectroscopy. Temperature- programmed reduction measurements showed that lanthana content higher than 0.5 wt % increased the extent of reduction to metallic Fe, while 0.5 wt % of lanthana facilitated the reduction to Fe3O4. In situ measurements on the iron oxide catalysts using mass and UV-visible spectroscopies permitted the quantification of the extent of reduction under temperature-programmed reduction and high-temperature water-gas shift conditions. The oxidation states were successfully calibrated against normalized absorbance spectra of visible light using the Kubelka-Munk theory. The normalized absorbance relative to the fully oxidized Fe2O3 increased as the extent of reduction increased. XANES suggested that the average bulk iron oxidation state during the water-gas shift reaction was Fe+2.57 for the catalyst with no lanthana and Fe+2.54 for the catalysts with 1 wt % lanthana. However, the UV-vis spectra suggest that the surface oxidation state of iron would be Fe+2.31 for the catalyst with 1 wt % lanthana if the oxidation state of iron in the catalyst with 0 wt % lanthana were Fe+2.57. The findings of this paper emphasize the importance of surface sensitive UV-visible spectroscopy for determining the extent of catalyst reduction during operation. The paper highlights the potential to use bench-scale UV-visible spectroscopy to study the surface chemistry of catalysts instead of less-available synchrotron X-ray radiation facilities. Full article
Show Figures

Figure 1

13 pages, 3904 KiB  
Article
Structural Changes of Highly Active Pd/MeOx (Me = Fe, Co, Ni) during Catalytic Methane Combustion
by Dominik Seeburg, Dongjing Liu, Joerg Radnik, Hanan Atia, Marga-Martina Pohl, Matthias Schneider, Andreas Martin and Sebastian Wohlrab
Catalysts 2018, 8(2), 42; https://doi.org/10.3390/catal8020042 - 23 Jan 2018
Cited by 15 | Viewed by 4499
Abstract
Fe2O3, Co3O4 and NiO nanoparticles were prepared via a citrate method and further functionalized with Pd by impregnation. The pure oxides as well as Pd/Fe2O3, Pd/Co3O4, and Pd/NiO [...] Read more.
Fe2O3, Co3O4 and NiO nanoparticles were prepared via a citrate method and further functionalized with Pd by impregnation. The pure oxides as well as Pd/Fe2O3, Pd/Co3O4, and Pd/NiO (1, 5 and 10 wt % Pd) were employed for catalytic methane combustion under methane lean (1 vol %)/oxygen rich (18 vol %, balanced with nitrogen) conditions. Already, the pure metal oxides showed a high catalytic activity leading to complete conversion temperature of T100 ≤ 500 °C. H2-TPR (Temperature-programmed reduction) experiments revealed that Pd-functionalized metal oxides exhibited enhanced redox activity compared to the pure oxides leading to improved catalytic combustion activity at lower temperatures. At a loading of 1 wt % Pd, 1Pd/Co3O4 (T100 = 360 °C) outperforms 1Pd/Fe2O3 (T100 = 410 °C) as well as 1Pd/NiO (T100 = 380 °C). At a loading of 10 wt % Pd, T100 could only be slightly reduced in all cases. 1Pd/Co3O4 and 1Pd/NiO show reasonable stability over 70 h on stream at T100. XPS (X-ray photoelectron spectroscopy) and STEM (Scanning transmission electron microscopy) investigations revealed strong interactions between Pd and NiO as well as Co3O4, respectively, leading to dynamic transformations and reoxidation of Pd due to solid state reactions, which leads to the high long-term stability. Full article
Show Figures

Graphical abstract

1445 KiB  
Article
Chiral Catalyst Deactivation during the Asymmetric Hydrogenation of Acetophenone
by Jose P. Ruelas-Leyva and Gustavo A. Fuentes
Catalysts 2017, 7(7), 193; https://doi.org/10.3390/catal7070193 - 23 Jun 2017
Cited by 6 | Viewed by 4971
Abstract
Asymmetric hydrogenation in solution catalyzed by chiral catalysts is a powerful tool to obtain chiral secondary alcohols. It is possible to reach conversions and enantiomeric excesses close to 99%, but that frequently requires the use of non-optimal amounts of catalysts or long reaction [...] Read more.
Asymmetric hydrogenation in solution catalyzed by chiral catalysts is a powerful tool to obtain chiral secondary alcohols. It is possible to reach conversions and enantiomeric excesses close to 99%, but that frequently requires the use of non-optimal amounts of catalysts or long reaction times. That is in part caused by the lack of kinetic information needed for the design of large-scale reactors, including few reported details about catalyst deactivation. In this work, we present a kinetic model for the asymmetric hydrogenation in solution of acetophenone, a prochiral substrate, catalyzed by different bisphosphine-diamine Ru complexes. The experimental data was fitted with a first order model that includes first order deactivation of the catalyst and the presence of residual activity. The fit of the experimental data is very good, and an analysis of the kinetic and deactivation parameters gives further insight into the role of each ligand present in the Ru catalysts. This is the first report of a kinetic analysis of homogenous complexes’ catalysis including an analysis of their deactivation. Full article
Show Figures

Graphical abstract

4823 KiB  
Article
Carbon-Modified Mesoporous Anatase/TiO2(B) Whisker for Enhanced Activity in Direct Synthesis of Hydrogen Peroxide by Palladium
by Rui Tu, Licheng Li, Suoying Zhang, Shuying Chen, Jun Li and Xiaohua Lu
Catalysts 2017, 7(6), 175; https://doi.org/10.3390/catal7060175 - 02 Jun 2017
Cited by 15 | Viewed by 5098
Abstract
The regulation of the interaction between H2O2 and its catalysts is a promising route to achieve high productivity and selectivity towards H2O2. Herein, mesoporous anatase/TiO2(B) whisker (mb-TiO2) modified with heterogeneous carbon was [...] Read more.
The regulation of the interaction between H2O2 and its catalysts is a promising route to achieve high productivity and selectivity towards H2O2. Herein, mesoporous anatase/TiO2(B) whisker (mb-TiO2) modified with heterogeneous carbon was prepared as the support of Pd-based catalysts for the direct synthesis of H2O2. The morphology and structure of the catalyst were investigated by transmission electron microscopy, X-ray diffraction, Raman spectroscopy, Brunner-Emmet-Teller measurements, and X-ray photoelectron spectroscopy. The interaction between H2O2 and the support was studied by isothermal calorimeter. The carbon heterogeneous modification can weaken the interaction between H2O2 and the support, then accelerate the desorption of H2O2 and reduce the re-adsorption of H2O2 in the reaction medium. Meanwhile, the synergistic effects between TiO2 and Pd nanoparticles are not influenced by the heterogeneous carbon distribution. The catalyst exhibits better performance for the synthesis of H2O2 compared with the corresponding unmodified catalyst; the productivity of H2O2 increases more than 40%, which can be ascribed to the decrease of further H2O2 conversion under the weakened interaction. Full article
Show Figures

Graphical abstract

6003 KiB  
Article
Development of Active and Stable Low Nickel Content Catalysts for Dry Reforming of Methane
by Quan Luu Manh Ha, Udo Armbruster, Hanan Atia, Matthias Schneider, Henrik Lund, Giovanni Agostini, Jörg Radnik, Huyen Thanh Vuong and Andreas Martin
Catalysts 2017, 7(5), 157; https://doi.org/10.3390/catal7050157 - 16 May 2017
Cited by 46 | Viewed by 6954
Abstract
Methane dry reforming (DRM) was investigated over highly active Ni catalysts with low metal content (2.5 wt %) supported on Mg-Al mixed oxide. The aim was to minimize carbon deposition and metal sites agglomeration on the working catalyst which are known to cause [...] Read more.
Methane dry reforming (DRM) was investigated over highly active Ni catalysts with low metal content (2.5 wt %) supported on Mg-Al mixed oxide. The aim was to minimize carbon deposition and metal sites agglomeration on the working catalyst which are known to cause catalyst deactivation. The solids were characterized using N2 adsorption, X-ray diffraction, temperature-programmed reduction, X-ray photoelectron spectroscopy, and UV-Vis diffuse reflectance spectroscopy. The results showed that MgO-Al2O3 solid solution phases are obtained when calcining Mg-Al hydrotalcite precursor in the temperature range of 550–800 °C. Such phases contribute to the high activity of catalysts with low Ni content even at low temperature (500 °C). Modifying the catalyst preparation with citric acid significantly slows the coking rate and reduces the size of large octahedrally coordinated NiO-like domains, which may easily agglomerate on the surface during DRM. The most effective Ni catalyst shows a stable DRM course over 60 h at high weight hourly space velocity with very low coke deposition. This is a promising result for considering such catalyst systems for further development of an industrial DRM technology. Full article
Show Figures

Figure 1

9418 KiB  
Article
Methanation of CO2 on Ni/Al2O3 in a Structured Fixed-Bed Reactor—A Scale-Up Study
by Daniel Türks, Hesham Mena, Udo Armbruster and Andreas Martin
Catalysts 2017, 7(5), 152; https://doi.org/10.3390/catal7050152 - 15 May 2017
Cited by 44 | Viewed by 10219
Abstract
Due to the ongoing change of energy supply, the availability of a reliable high-capacity storage technology becomes increasingly important. While conventional large-scale facilities are either limited in capacity respective supply time or their extension potential is little (e.g., pumped storage power stations), decentralized [...] Read more.
Due to the ongoing change of energy supply, the availability of a reliable high-capacity storage technology becomes increasingly important. While conventional large-scale facilities are either limited in capacity respective supply time or their extension potential is little (e.g., pumped storage power stations), decentralized units could contribute to energy transition. The concepts of PtX (power-to-X) storage technologies and in particular PtG (power-to-gas) aim at fixation of electric power in chemical compounds. CO2 hydrogenation (methanation) is the foundation of the PtG idea as H2 (via electrolysis) and CO2 are easily accessible. Methane produced in this way, often called substitute natural gas (SNG), is a promising solution since it can be stored in the existing gas grid, tanks or underground cavern storages. Methanation is characterized by a strong exothermic heat of reaction which has to be handled safely. This work aims at getting rid of extreme temperature hot-spots in a tube reactor by configuring the catalyst bed structure. Proof of concept studies began with a small tube reactor (V = 12.5 cm3) with a commercial 18 wt % Ni/Al2O3 catalyst. Later, a double-jacket tube reactor was built (V = 452 cm3), reaching a production rate of 50 L/h SNG. The proposed approach not only improves the heat management and process safety, but also increases the specific productivity and stability of the catalyst remarkably. Full article
Show Figures

Figure 1

4667 KiB  
Article
Methanol Steam Reforming: Na Doping of Pt/YSZ Provides Fine Tuning of Selectivity
by Michela Martinelli, Gary Jacobs, Uschi M. Graham and Burtron H. Davis
Catalysts 2017, 7(5), 148; https://doi.org/10.3390/catal7050148 - 10 May 2017
Cited by 13 | Viewed by 5410
Abstract
In this work, we found that sodium doping can be used to improve CO2 selectivity for supported Pt catalyst during methanol steam reforming. These materials are usually very active in the low temperature range; however, they are characterized by high selectivity of [...] Read more.
In this work, we found that sodium doping can be used to improve CO2 selectivity for supported Pt catalyst during methanol steam reforming. These materials are usually very active in the low temperature range; however, they are characterized by high selectivity of CO, which is a poison in downstream polymer electrolyte membrane fuel cells (PEM-FC) application. With Na doping, we found that CO2 selectivity was higher than 90% when 2.5 wt.% of sodium was added to Pt/YSZ. We have speculated that the different product distribution is due to a different reaction pathway being opened for CH3OH decomposition. Methanol decarbonylation was favored when Na was absent or low, while a formate decarboxylation pathway was favored when Na content reached 2.5 wt.%. The proposal is rooted in the observed weakening of the C-H bond of formate, as demonstrated in in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and kinetic isotope effect (KIE) experiments for the water-gas shift reaction conducted at low temperature. When adsorbed methoxy, produced when methanol is dissociatively adsorbed, was converted in the presence of H2O in DRIFTS spectroscopy, formate species were prevalent for a 2% Pt–2.5% Na/YSZ catalyst, while only a minor contribution was observed for 2% Pt/YSZ. Moreover, the formate produced on Na-doped Pt/YSZ exhibited ν(CH) stretching bands at low wavenumber, consistent with C–H bond weakening, thus favoring dehydrogenation (and decarboxylation). It is proposed that when Na is present, formate is likely an intermediate, and because its dehydrogenation is favored, selectivity can be fine-tuned between decarbonylation and decarboxylation based on Na dopant level. Full article
Show Figures

Graphical abstract

2873 KiB  
Article
Catalysts Promoted with Niobium Oxide for Air Pollution Abatement
by Wendi Xiang, Xiaochen Han, Jennifer Astorsdotter and Robert Farrauto
Catalysts 2017, 7(5), 144; https://doi.org/10.3390/catal7050144 - 08 May 2017
Cited by 5 | Viewed by 4820
Abstract
Pt-containing catalysts are currently used commercially to catalyze the conversion of carbon monoxide (CO) and hydrocarbon (HC) pollutants from stationary chemical and petroleum plants. It is well known that Pt-containing catalysts are expensive and have limited availability. The goal of this research is [...] Read more.
Pt-containing catalysts are currently used commercially to catalyze the conversion of carbon monoxide (CO) and hydrocarbon (HC) pollutants from stationary chemical and petroleum plants. It is well known that Pt-containing catalysts are expensive and have limited availability. The goal of this research is to find alternative and less expensive catalysts to replace Pt for these applications. This study found that niobium oxide (Nb2O5), as a carrier or support for certain transition metal oxides, promotes oxidation activity while maintaining stability, making them candidates as alternatives to Pt. The present work reports that the orthorhombic structure of niobium oxide (formed at 800 °C in air) promotes Co3O4 toward the oxidation of both CO and propane, which are common pollutants in volatile organic compound (VOC) applications. This was a surprising result since this structure of Nb2O5 has a very low surface area (about 2 m2/g) relative to the more traditional Al2O3 support, with a surface area of 150 m2/g. The results reported demonstrate that 1% Co3O4/Nb2O5 has comparable fresh and aged catalytic activity to 1% Pt/γ-Al2O3 and 1% Pt/Nb2O5. Furthermore, 6% Co3O4/Nb2O5 outperforms 1% Pt/Al2O3 in both catalytic activity and thermal stability. These results suggest a strong interaction between niobium oxide and the active component—cobalt oxide—likely by inducing an oxygen defect structure with oxygen vacancies leading to enhanced activity toward the oxidation of CO and propane. Full article
Show Figures

Figure 1

Back to TopTop