Urban Climate, Comfort and Building Energy Performance

A special issue of Buildings (ISSN 2075-5309). This special issue belongs to the section "Architectural Design, Urban Science, and Real Estate".

Deadline for manuscript submissions: closed (10 February 2024) | Viewed by 13047

Special Issue Editors

Department of Civil, Construction and Environmental Engineering, The University of Alabama, Tuscaloosa, AL 35487, USA
Interests: building energy policy; building energy systems; sustainable and resilient buildings; electrification and decarbonisation of built environments; grid-interactive efficient buildings; building-to-grid integration
Special Issues, Collections and Topics in MDPI journals
Pacific Northwest National Laboratory, Richland, WA 99354, USA
Interests: building energy efficiency; building information modelling; grid-interactive efficiency buildings; urban-scale building simulation and analytics

Special Issue Information

Dear Colleagues,

Electrification and decarbonization are changing the climate, human comfort, and building energy usage at an urban level. Existing power generation infrastructures can be significantly affected by the adoption of distributed energy resources (DERs), which are instrumental facilitators for a more environmentally friendly energy infrastructure. Behind-the-meter DERs enable some electricity end users to be not only consumers, but also generators. These research domains deserve in-depth studies on potential pathways to decarbonization and the associated impacts on climate, human comfort, and energy usage at an urban scale.

This is a multi-domain research topic, which needs contributions from architectural, mechanical, electrical, environmental, economic, and policy researchers. We encourage researchers from different research areas to share domain knowledge and research findings. In this Special Issue, we invite original contributions for state-of-the-art methodologies, case studies, and reviews related to urban climate, comfort, and building energy performance.

We welcome papers on the topics including but not limited to:

  • Building energy performance at an urban or community scale;
  • Decarbonization and electrification;
  • Grid-interactive efficient buildings;
  • Building-to-grid integration;
  • Thermal comfort;
  • Urban and building adaptation strategies to climate change;
  • Urban microclimate;
  • Urban-scale environmental and economic analysis.

Dr. Yunyang Ye
Dr. Xuechen Lei
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Buildings is an international peer-reviewed open access monthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2600 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • urban microcliamte
  • decarbonization and electricification
  • urban-scale building energy performance
  • grid-interactive efficient buildings
  • thermal comfort
  • urban-scale environmental and economic analysis

Published Papers (10 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

Jump to: Other

15 pages, 5925 KiB  
Article
Reinventing Sustainable Neighborhood Planning: A Case Study of Le Rheu, France
by Ho-Soon Choi
Buildings 2024, 14(2), 536; https://doi.org/10.3390/buildings14020536 - 17 Feb 2024
Cited by 1 | Viewed by 559
Abstract
This study focuses on sustainable development in urban planning and develops a 21st century sustainable neighborhood. For empirical neighborhood design, urban design was conducted on a specific 5.2 ha site in Le Rheu Commune, France. Targeting a site with the attributes of ecologically [...] Read more.
This study focuses on sustainable development in urban planning and develops a 21st century sustainable neighborhood. For empirical neighborhood design, urban design was conducted on a specific 5.2 ha site in Le Rheu Commune, France. Targeting a site with the attributes of ecologically based sustainable urban planning, this study derived a neighborhood design model using sustainable development strategy methods from environmental, economic, and social perspectives. Consequently, an infrastructure-based design was created, integrating and accommodating the infrastructure and various urban amenities necessary for the neighborhood. Additionally, infrastructure within the neighborhood was proposed as a design element for technology-based sustainable urban planning. This is a novel, empirical study based on urban planning theory. This theory-based empirical research model contributes to urban planning theory and the knowledge of urban planners and architects. Future studies should conduct urban planning research that combines sustainable neighborhood planning based on ecological infrastructure, as attempted in Le Rheu Commune, with the IoT, such as smart home care. Full article
(This article belongs to the Special Issue Urban Climate, Comfort and Building Energy Performance)
Show Figures

Figure 1

17 pages, 13256 KiB  
Article
High-Rise Residential District Morphology Optimization for Enhancing the Green Space Cooling Effect
by Feng Shi, Yuan Chen, Wenru Yue and Yupeng Wang
Buildings 2024, 14(1), 183; https://doi.org/10.3390/buildings14010183 - 11 Jan 2024
Viewed by 505
Abstract
Large-scale urban green spaces exert a cooling effect in cities and have great potential for optimizing the urban climate. In this study, taking the typical green space Xingfulindai in Xi’an as an example, we carried out field measurements and ENVI-met simulations of the [...] Read more.
Large-scale urban green spaces exert a cooling effect in cities and have great potential for optimizing the urban climate. In this study, taking the typical green space Xingfulindai in Xi’an as an example, we carried out field measurements and ENVI-met simulations of the area and the surrounding high-rise residential areas to analyze the cooling effect. The results show that the cooling effect is the strongest at night in summer seasons, spreading up to 250 m, and the cooling intensity along the downwind direction can be up to 2 °C. On this basis, a total of 16 ideal models of seven groups of high-rise residential blocks were established to analyze the effect of three morphological indices, namely, building orientation, podium ratio, and otherness with respect to the cooling effect of the green space, and a block morphology design strategy for high-rise residential areas was proposed to enhance the cooling effect of the green space. This study provides climate-adaptive optimization strategies for the construction and renewal of residential blocks. Full article
(This article belongs to the Special Issue Urban Climate, Comfort and Building Energy Performance)
Show Figures

Figure 1

26 pages, 20611 KiB  
Article
An Investigation of Outdoor Thermal Comfort Assessment for Elderly Individuals in a Field Study in Northeastern China
by Bo Wang, Hongyu Zhao, Bingbing Han and Xue Jiang
Buildings 2023, 13(10), 2458; https://doi.org/10.3390/buildings13102458 - 27 Sep 2023
Viewed by 679
Abstract
The harsh climate and the aging of urban populations have negatively impacted the quality of life of the elderly in severely cold regions. As a result, there is an urgent need to improve environment quality and accurately evaluate outdoor thermal comfort. However, existing [...] Read more.
The harsh climate and the aging of urban populations have negatively impacted the quality of life of the elderly in severely cold regions. As a result, there is an urgent need to improve environment quality and accurately evaluate outdoor thermal comfort. However, existing studies have paid little attention to older adults living in severely cold climates. This paper aims to fill this gap by studying the elderly population in severely cold cities with high aging rates in China. By combining on-site testing, questionnaire surveys, CFD modeling, parametric computing, and statistical analysis, the study presents an adapted UTCI for elderly people, as well as multi-seasonal prediction models. The results (1) show that the neutral ranges of the UTCI are significantly affected by both climate zones and age groups. Older people are more tolerant to heat but more sensitive to cold. (2) The results also reveal the importance of factors such as air temperature, wind speed, solar radiation temperature, wind direction, relative humidity, and cloud cover in evaluating outdoor thermal comfort. (3) Multi-seasonal thermal comfort models based on neural networks were developed, and empirical studies verified that the model had the highest accuracy in the transitional season and the lowest accuracy in the winter season. Full article
(This article belongs to the Special Issue Urban Climate, Comfort and Building Energy Performance)
Show Figures

Figure 1

24 pages, 11498 KiB  
Article
Synergistic Effects of Roadside Trees and Spatial Geometry on Thermal Environment in Urban Streets: A Case Study in Tropical, Medium-Sized City, Taiwan
by Jou-Man Huang and Liang-Chun Chen
Buildings 2023, 13(8), 2092; https://doi.org/10.3390/buildings13082092 - 17 Aug 2023
Cited by 1 | Viewed by 727
Abstract
With the global warming effect and the rapid growth of global urbanization, the concept of urban heat islands (UHIs) has become one of the most important environmental issues in the world. Early studies on UHIs mostly focused on highly developed, large cities and [...] Read more.
With the global warming effect and the rapid growth of global urbanization, the concept of urban heat islands (UHIs) has become one of the most important environmental issues in the world. Early studies on UHIs mostly focused on highly developed, large cities and found that urban heat island intensity (UHII) can be as high as 4~7 °C. In recent years, it has also been found that the UHI of medium-sized cities can also reach 4–6 °C. Previous studies have also found that planting, street orientation, and aspect ratio individually have a great impact on the thermal environment of streets, but there are not many studies that comprehensively discuss the synergistic effects of these factors. Therefore, this study takes a tropical, medium-sized city, Chiayi City, as a case study to use the ENVI-met numerical simulation tool to comprehensively compare and analyze the influence of the trees and geometric characteristics of streets on the microclimate and comfort in the streets. As a result, in a tropical, with sea winds (west winds), medium-sized city, by comparison of 12 street schemes with different roadside tree situations (planting or not), orientations (E–W, N–S), and aspect ratios (0.3, 0.7, 1.0), the improvement benefits and possible mechanisms of air temperature, wind speed, MRT, PET, SET, absolute humidity, etc. at the pedestrian street level (H = 1.4 m) were obtained and show that the cooling effect of trees was deeply affected by the street orientation and geometry. An analysis of changes at different heights was also obtained. Finally, design strategy suggestions, such as the street orientation, should be prioritized to be parallel to the prevailing wind; modifying tree shapes or building forms on streets perpendicular to the prevailing wind for creating cool and comfortable streets in future tropical, medium-sized cities were proposed. Full article
(This article belongs to the Special Issue Urban Climate, Comfort and Building Energy Performance)
Show Figures

Figure 1

19 pages, 1843 KiB  
Article
A Metaheuristic Hybrid of Double-Target Multi-Layer Perceptron for Energy Performance Analysis in Residential Buildings
by Cheng Lin and Yunting Lin
Buildings 2023, 13(4), 1086; https://doi.org/10.3390/buildings13041086 - 20 Apr 2023
Cited by 2 | Viewed by 1073
Abstract
Recently, metaheuristic algorithms have been recognized as applicable techniques for solving various computational complexities in energy problems. In this work, a powerful metaheuristic technique called the water cycle algorithm (WCA) is assessed for analyzing and predicting two annual parameters, namely thermal energy demand [...] Read more.
Recently, metaheuristic algorithms have been recognized as applicable techniques for solving various computational complexities in energy problems. In this work, a powerful metaheuristic technique called the water cycle algorithm (WCA) is assessed for analyzing and predicting two annual parameters, namely thermal energy demand (TDA) and weighted average discomfort degree-hours (DDA), for a residential building. For this purpose, a double-target multi-layer perceptron (2TMLP) model is created to establish the connections between the TDA and DDA with the geometry and architecture of the building. These connections are then processed and optimized by the WCA using 80% of the data. Next, the applicability of the model is examined using the residual 20%. According to the results, the goodness-of-fit for the TDA and DDA was 98.67% and 99.74%, respectively, in terms of the Pearson correlation index. Moreover, a comparison between WCA-2TMLP and other hybrid models revealed that this model enjoys the highest accuracy of prediction. However, the shuffled complex evolution (SCE) optimizer has a better convergence rate. Hence, the final mathematical equation of the SCE-2TMLP is derived for directly predicting the TDA and DDA without the need of using programming environments. Altogether, this study may shed light on the applications of artificial intelligence for optimizing building energy performance and related components (e.g., heating, ventilation, and air conditioning systems) in new construction projects. Full article
(This article belongs to the Special Issue Urban Climate, Comfort and Building Energy Performance)
Show Figures

Figure 1

16 pages, 6978 KiB  
Article
Accessibility Study of a Compact Wind Tunnel with an Unequal Spacing Grid for the Outdoor Wind Environment
by Xiaojun Ma, Yu Zhao, Xueying Wen and Jiujiu Chen
Buildings 2022, 12(12), 2188; https://doi.org/10.3390/buildings12122188 - 09 Dec 2022
Viewed by 954
Abstract
One of the key issues in architectural design and regional planning is to create a safe and comfortable outdoor building environment, which calls for more studies. Wind tunnel experiments and computational fluid dynamic (CFD) simulations are the primary methods for the current studies. [...] Read more.
One of the key issues in architectural design and regional planning is to create a safe and comfortable outdoor building environment, which calls for more studies. Wind tunnel experiments and computational fluid dynamic (CFD) simulations are the primary methods for the current studies. The airflow and boundary conditions are controllable for the wind tunnel experiment, and the data is reliable. In most wind tunnel platforms, spires and roughness elements are applied to create the gradient wind of the atmospheric boundary layer, leading to the oversized, high construction cost, and complex operation. In this paper, in order to explore a simple method for measuring and studying the outdoor building wind environment using wind tunnels, a compact wind tunnel platform adopting grids with unequal spacing was designed and tested, based on the theoretical model of the atmospheric boundary layer. A comparison between the test results and the theoretical values indicated that this new wind tunnel platform could achieve a gradient wind field and is accessible in applying low-speed wind tunnels to the measurement and research of the building wind environment. The application case in a high-rise building of the central business district (CBD) region in Beijing, was presented in this paper. Compared with another analytical method, the CFD simulation, the compact wind tunnel revealed its applicability that could be used for predicting and evaluating the outdoor wind environment around the building. This compact wind tunnel is more flexible and convenient than the traditional ones, with a smaller size, easier construction and operation, and lower costs. Therefore, we suggest more applications of this compact wind tunnel platform in future experimental studies of outdoor wind environments. Full article
(This article belongs to the Special Issue Urban Climate, Comfort and Building Energy Performance)
Show Figures

Figure 1

18 pages, 5659 KiB  
Article
A Case Study about Energy and Cost Impacts for Different Community Scenarios Using a Community-Scale Building Energy Modeling Tool
by Yunyang Ye, Xuechen Lei, Jeremy Lerond, Jian Zhang and Eli Thomas Brock
Buildings 2022, 12(10), 1549; https://doi.org/10.3390/buildings12101549 - 27 Sep 2022
Cited by 3 | Viewed by 1661
Abstract
The United States building sector consumed approximately 75% of electricity in 2019. By implementing renewable energy technologies and control strategies into buildings, future buildings will serve as energy generators as well as consumers. To accommodate this transition, communications among buildings and between buildings [...] Read more.
The United States building sector consumed approximately 75% of electricity in 2019. By implementing renewable energy technologies and control strategies into buildings, future buildings will serve as energy generators as well as consumers. To accommodate this transition, communications among buildings and between buildings and the grid could provide more possibilities to optimize the energy performance of buildings. This paper develops a community-scale building energy model tool and conducts a case study adopting behind-the-meter distributed energy resources, sharing energy in different buildings, and using different electricity tariff structures. Three scenarios are studied: (1) electricity only supplied by the grid, (2) photovoltaic (PV) panels installed on and available to some but not all buildings, and (3) a connected community. To consider the impacts of locations and energy tariffs, this paper selects four cities and three electricity tariffs to evaluate the energy and cost performances of these three scenarios. The results show that the PV panels in Scenario 2 reduce 25% to 33% of the community-level electricity consumption and 20% to 30% of the community-level electricity cost compared with Scenario 1 in all studied locations and energy tariffs. By considering power management in the connected community (Scenario 3), the electricity consumption and cost can be further reduced by 6% to 7% and 5% to 11%, respectively, compared with Scenario 2. Full article
(This article belongs to the Special Issue Urban Climate, Comfort and Building Energy Performance)
Show Figures

Figure 1

20 pages, 3309 KiB  
Article
Integrated Economic and Environmental Assessment-Based Optimization Design Method of Building Roof Thermal Insulation
by Haitao Wang, Yuge Huang and Liu Yang
Buildings 2022, 12(7), 916; https://doi.org/10.3390/buildings12070916 - 29 Jun 2022
Cited by 8 | Viewed by 1632
Abstract
The design of thermal insulation in roofs is very important to reduce energy consumption and decrease the environmental impacts of buildings. An integrated economic and environmental assessment-based optimization design method is presented in this paper to find the best candidate insulation design scheme [...] Read more.
The design of thermal insulation in roofs is very important to reduce energy consumption and decrease the environmental impacts of buildings. An integrated economic and environmental assessment-based optimization design method is presented in this paper to find the best candidate insulation design scheme for building roofs, including the determination of roof thermal insulation type and the optimum insulation thickness. In the optimization design method, a zonal method-based double-skin ventilation roof heat transfer model is developed to predict the roof energy consumption. Economic and environmental benefits due to thermal insulation are calculated by using the economic analysis model, the environmental analysis model, and roof energy consumption. Moreover, an integrated dimensionless economic and environmental assessment index is proposed to evaluate different roof thermal insulation design schemes. The optimum insulation thickness is determined by maximizing the sum of economic benefit and environmental benefit due to thermal insulation. The validation results in a real building show that the predicted data for the zonal-based double-skin ventilation roof heat transfer model agreed well with the measured data, with a maximum relative error of 8.2%. The optimum insulation thickness of extruded polystyrene (EPS), mineral wool (MW), and polyurethane (PU) was between 0.082 m and 0.171 m for the single-skin roof in a low-temperature granary in Changsha region in China. The ranking of the integrated assessment indexes of thermal insulation is EPS > MW > PU. A double-skin ventilation roof can reduce the optimum thickness of thermal insulation. The best result is obtained by EPS for the double-skin roof with a grey outer surface color for the low-temperature granary roof in Changsha region in China. The influencing factors of insulation type, roof structure, and roof outer-surface color should be considered in finding the best candidate insulation design solution for building roofs. The integrated economic and environmental assessment-based optimization design method can help designers to efficiently find the best design scheme of thermal insulation to maximize the sum of economic benefit and environmental benefit for building roofs. Full article
(This article belongs to the Special Issue Urban Climate, Comfort and Building Energy Performance)
Show Figures

Figure 1

25 pages, 26497 KiB  
Article
Sustainability Study of a Residential Building near Subway Based on LCA-Emergy Method
by Xinnan Chen, Hairuo Wang, Junxue Zhang, He Zhang, Ashish T. Asutosh, Guodong Wu, Guobin Wei, Yaling Shi and Minghui Yang
Buildings 2022, 12(5), 679; https://doi.org/10.3390/buildings12050679 - 19 May 2022
Cited by 8 | Viewed by 1749
Abstract
In the context of ecological building and green building popularity, building sustainability assessment is becoming more and more important. In this paper, a comprehensive evaluation platform by coupled LCA method and energy method was designed, verified, and analyzed to assess the sustainability of [...] Read more.
In the context of ecological building and green building popularity, building sustainability assessment is becoming more and more important. In this paper, a comprehensive evaluation platform by coupled LCA method and energy method was designed, verified, and analyzed to assess the sustainability of the building system. The main results illustrated that the construction stage is the most critical stage in terms of emergy angle. From a sustainability perspective, the Emergy Sustainability Indicator was at a moderate level (1.0141), which can be considered to increase the proportion of renewable energy and reduce the proportion of non-renewable resources to improve the sustainability degree. Of the three scenarios designed, the second scenario has the best sustainability in the building system. The unit emergy value of the whole building was also shown to demonstrate the unit emergy of an individual. In order to verify the accuracy of the data, a sensitivity analysis was conducted. Finally, two types of positive measures are proposed to ameliorate the environmental sustainability in the building system, containing the increasing proportion of renewable energy and using recycled building materials. Full article
(This article belongs to the Special Issue Urban Climate, Comfort and Building Energy Performance)
Show Figures

Figure 1

Other

Jump to: Research

16 pages, 2594 KiB  
Perspective
A Perspective of Decarbonization Pathways in Future Buildings in the United States
by Yunyang Ye, Ammar H. A. Dehwah, Cary A. Faulkner, Haripriya Sathyanarayanan and Xuechen Lei
Buildings 2023, 13(4), 1003; https://doi.org/10.3390/buildings13041003 - 11 Apr 2023
Cited by 1 | Viewed by 2118
Abstract
The commitment of electrification and decarbonization goals in the United States (U.S.) will significantly change the performance of future buildings. To meet these goals, it is critical to summarize the existing research related to building electrification and decarbonization and discuss future research pathways. [...] Read more.
The commitment of electrification and decarbonization goals in the United States (U.S.) will significantly change the performance of future buildings. To meet these goals, it is critical to summarize the existing research related to building electrification and decarbonization and discuss future research pathways. This paper provides a perspective on decarbonization pathways of future buildings in the U.S. A critical review of the existing research was conducted, which is divided into three closely linked categories: technologies, economic impacts, and code regulations. Technologies support investments and code regulations while marketing affects the design of building codes and standards. In the meantime, code regulations guide the development of technologies and marketing. Based on the review, future potential research directions for building decarbonization are then discussed. Due to the needs of building decarbonization, future research will be multidisciplinary, conducted at a large geographic scale, and involve a multitude of metrics, which will undoubtedly introduce new challenges. The perspective presented in this paper will provide policy-makers, researchers, building owners, and other stakeholders with a way to understand the impact of electrification and decarbonization of future buildings in the U.S. Full article
(This article belongs to the Special Issue Urban Climate, Comfort and Building Energy Performance)
Show Figures

Figure 1

Back to TopTop