Micro-Propulsion Systems and Components for Small Spacecraft—Current Trends, Innovations and Challenges

A special issue of Aerospace (ISSN 2226-4310). This special issue belongs to the section "Astronautics & Space Science".

Deadline for manuscript submissions: closed (28 October 2020) | Viewed by 85918

Special Issue Editors

Department of Mechanical Engineering, The University of Vermont, Burlington, VT 05405, USA
Interests: small spacecraft propulsion and engineering; orbital mechanics; micro-scale thermofluid engineering
Department of Space Engineering, Aerospace Engineering Faculty, Delft University of Technology, Kluyverweg 1, 2629 HS Delft, The Netherlands
Interests: space propulsion; small spacecraft design; space systems engineering; miniaturization of space systems and components; interplanetary CubeSat missions
Special Issues, Collections and Topics in MDPI journals

Special Issue Information

Dear Colleagues,

Miniaturized spacecraft in the nano-satellite class, such as CubeSats or PocketQubes, are making access to space more and more easy, fast, and cheap, especially with the recent developments in miniaturization technologies. Simplification of the satellite infrastructure and use of off-the shelf electronic components make it possible to design and produce a working satellite at low cost. As a consequence, although this class of spacecraft were initially used mostly in Academic projects, they are rapidly attracting attention of research institutions and companies for specific commercial applications.

However, a limit on the exponential growth that small satellite launches have shown in recent years is posed by the relatively small number of available dedicated propulsion systems. Propulsive capabilities are fundamental for these platforms to totally realize their potential, allowing them to engage in a wider range of missions such as those characterized by many satellites flying in formation or in a constellation, possibly even in low altitude orbits. The strict mass, volume, and power limitations typically imposed by small satellite requirements make it impossible to simply scale down “conventional” propulsion systems: completely different, and often unique, micro-technologies are needed to help develop a compliant propulsion system, including Micro-ElectroMechanical Systems (MEMS) and high level component integration. Therefore, research on micro-propulsion systems for small satellites is currently a very “hot”, active and innovative field, which involves a large number of universities and companies. This Special Issue will host a selection of advanced developments in the field, related to any kind of micro-propulsion concept.

Authors are encouraged to submit manuscripts on analytical, numerical, design, test or integration activities of micro-propulsion systems for small spacecraft. Proposed papers can either relate to the complete system or specific components of it (nozzle, thruster, valves, sensors, tank, power conditioning, propellants, fluidic lines, etc.). Contributions on chemical, cold gas, electric or electro-thermal propulsion are welcome, as well as advanced propulsion concepts.

Prof. Darren L. Hitt
Dr. Angelo Cervone
Guest Editors

Manuscript Submission Information

Manuscripts should be submitted online at www.mdpi.com by registering and logging in to this website. Once you are registered, click here to go to the submission form. Manuscripts can be submitted until the deadline. All submissions that pass pre-check are peer-reviewed. Accepted papers will be published continuously in the journal (as soon as accepted) and will be listed together on the special issue website. Research articles, review articles as well as short communications are invited. For planned papers, a title and short abstract (about 100 words) can be sent to the Editorial Office for announcement on this website.

Submitted manuscripts should not have been published previously, nor be under consideration for publication elsewhere (except conference proceedings papers). All manuscripts are thoroughly refereed through a single-blind peer-review process. A guide for authors and other relevant information for submission of manuscripts is available on the Instructions for Authors page. Aerospace is an international peer-reviewed open access monthly journal published by MDPI.

Please visit the Instructions for Authors page before submitting a manuscript. The Article Processing Charge (APC) for publication in this open access journal is 2400 CHF (Swiss Francs). Submitted papers should be well formatted and use good English. Authors may use MDPI's English editing service prior to publication or during author revisions.

Keywords

  • micro-propulsion
  • small spacecraft
  • CubeSats
  • miniaturization of space systems and components

Related Special Issue

Published Papers (9 papers)

Order results
Result details
Select all
Export citation of selected articles as:

Research

Jump to: Review

11 pages, 3720 KiB  
Article
SITAEL HC1 Low-Current Hollow Cathode
by Daniela Pedrini, Cosimo Ducci, Ugo Cesari, Tommaso Misuri and Mariano Andrenucci
Aerospace 2020, 7(7), 96; https://doi.org/10.3390/aerospace7070096 - 10 Jul 2020
Cited by 9 | Viewed by 4142
Abstract
SITAEL is active in the field of electric propulsion and is involved in the development of different thruster technologies—mainly Hall thrusters (HTs)—of power levels ranging from 100 W up to 20 kW. Low-power HTs are the most effective choice to perform orbit transfer, [...] Read more.
SITAEL is active in the field of electric propulsion and is involved in the development of different thruster technologies—mainly Hall thrusters (HTs)—of power levels ranging from 100 W up to 20 kW. Low-power HTs are the most effective choice to perform orbit transfer, drag compensation, and de-orbiting maneuvers for small satellites. This paper is dedicated to the activities regarding HC1, the hollow cathode conceived for the 100-W-class Hall thruster under development at SITAEL. Successful test campaigns were performed and are described, with emphasis on the improvements in the cathode design after an extensive research and development phase. The results are presented and discussed, along with future developments of the ongoing activities. Full article
Show Figures

Figure 1

17 pages, 6588 KiB  
Article
Fabrication and Testing of the Cold Gas Propulsion System Flight Unit for the Adelis-SAMSON Nano-Satellites
by Michael Zaberchik, Dan R. Lev, Eviatar Edlerman and Avner Kaidar
Aerospace 2019, 6(8), 91; https://doi.org/10.3390/aerospace6080091 - 19 Aug 2019
Cited by 8 | Viewed by 10096
Abstract
Adelis-SAMSON is a nano-satellite mission aimed at performing geo-location of target signals on Earth using a tight three-satellite formation in space. To maintain formation, each nano-satellite is equipped with a cold gas propulsion system. The design, qualification, and integration of the Adelis-SAMSON nano-satellite [...] Read more.
Adelis-SAMSON is a nano-satellite mission aimed at performing geo-location of target signals on Earth using a tight three-satellite formation in space. To maintain formation, each nano-satellite is equipped with a cold gas propulsion system. The design, qualification, and integration of the Adelis-SAMSON nano-satellite propulsion system is presented in this paper. The cold gas propulsion system mass is approximately 2 kg, takes a volume of 2U, and generates a thrust of 80 mN from four thrusters using krypton as a propellant. We first present the propulsion system requirements and corresponding system configuration conceived to meet the mission requirements. Subsequently, we present the system architecture while listing all the components. We overview the particular role and qualification process of four of the propulsion system’s components: the propellant tank, thruster assembly, pressure regulators, and fill and vent valve. We detail the tests performed on each component, such as proof pressure tests, vibration tests, and external leak tests. Finally, we present the propulsion system level tests before delivery for satellite integration and discuss the propulsion system’s concept of operations. Full article
Show Figures

Figure 1

18 pages, 2561 KiB  
Article
A Single-Use Microthruster Concept for Small Satellite Attitude Control in Formation-Flying Applications
by Sandra Romero-Diez, Lydia Hantsche, Jason M. Pearl, Darren L. Hitt, M. Ryan McDevitt and Patrick C. Lee
Aerospace 2018, 5(4), 119; https://doi.org/10.3390/aerospace5040119 - 14 Nov 2018
Cited by 6 | Viewed by 7010
Abstract
In recent years, the maturation of small satellite technology has led to their adoption for a variety of space missions. The next generation of small satellite missions, however, will likely have the satellites operating in formations or “constellations” to perform missions that are [...] Read more.
In recent years, the maturation of small satellite technology has led to their adoption for a variety of space missions. The next generation of small satellite missions, however, will likely have the satellites operating in formations or “constellations” to perform missions that are not currently possible. A key enabling technology for constellation-based missions is a miniaturized propulsion system that is capable of delivering the extremely low impulse levels required for maintaining precise relative position and orientation. Existing propulsion solutions for this regime suffer from compromises on power, safety, and cost that have limited their adoption. In this work, we describe a new, low-power micropropulsion concept based on the thermal decomposition of an inert chemical blowing agent (CBA) as the propellant. A meso-scale prototype device is designed, fabricated, and tested. The experimental results indicate that this concept, when appropriately scaled, is capable of providing thrust levels (∼1 μ N) and impulse-bits (∼0.1 μ N·s) that are commensurate with the intended application. Full article
Show Figures

Graphical abstract

22 pages, 7900 KiB  
Article
A Dual Mode Propulsion System for Small Satellite Applications
by Kevin R. Gagne, M. Ryan McDevitt and Darren L. Hitt
Aerospace 2018, 5(2), 52; https://doi.org/10.3390/aerospace5020052 - 02 May 2018
Cited by 13 | Viewed by 9743
Abstract
This study focused on the development of a chemical micropropulsion system suitable for primary propulsion and/or attitude control for a nanosatellite. Due to the limitations and expense of current micropropulsion technologies, few nanosatellites with propulsion have been launched to date; however, the availability [...] Read more.
This study focused on the development of a chemical micropropulsion system suitable for primary propulsion and/or attitude control for a nanosatellite. Due to the limitations and expense of current micropropulsion technologies, few nanosatellites with propulsion have been launched to date; however, the availability of such a propulsion system would allow for new nanosatellite mission concepts, such as deep space exploration, maneuvering in low gravity environments and formation flying. This work describes the design of “dual mode” monopropellant/bipropellant microthruster prototype that employs a novel homogeneous catalysis scheme. Results from prototype testing are reported that validate the concept. The micropropulsion system is designed to be fabricated using a combination of additively-manufactured and commercial off the shelf (COTS) parts along with non-toxic fuels, thus making it a low-cost and environmentally-friendly option for future nanosatellite missions. Full article
Show Figures

Graphical abstract

11 pages, 4743 KiB  
Article
Prilling and Coating of Ammonium Dinitramide (ADN) Solid Green Propellant in Toluene Mixture Using Ultrasound Sonication
by Asad Rahman, Jitkai Chin and Kean How Cheah
Aerospace 2018, 5(1), 29; https://doi.org/10.3390/aerospace5010029 - 09 Mar 2018
Cited by 17 | Viewed by 7650
Abstract
Ammonium Dinitramide (ADN) in its generic form has a long needle shaped structure, which hinders higher solid loading. Therefore, it is of utmost importance to optimize its crystal morphology into octagonal shapes. Moreover, the low critical humidity level of ADN renders it unusable [...] Read more.
Ammonium Dinitramide (ADN) in its generic form has a long needle shaped structure, which hinders higher solid loading. Therefore, it is of utmost importance to optimize its crystal morphology into octagonal shapes. Moreover, the low critical humidity level of ADN renders it unusable in a humid climate. Hence, encapsulation with a hydrophobic polymer is necessary. In the present work, ADN was synthesized by nitration of potassium sulfamate with mixed acid nitration. The product was then mixed with toluene, graphene, citryl ammonium butyl, Cab-o-sil, and coating polymer (Polystyrene or HTPB) and treated with ultrasound to obtain semi-spherical ADN-coated particles. The method offers a reduction in operating temperature and elimination of ADN melting in the shape-altering process. In addition, the ADN product has a similar particle size and thermal stability compared to those in a conventional ADN melt-prilling method. The ADN product investigated under SEM confirms the particle morphological change from long needles into semi-spherical shapes. The particle size obtained, in the micrometer range, is ideal for higher theoretical maximum density. Furthermore, the ultrasound-treated ADN particles show significant reduction in moisture absorption, from 68% to 16% at 65% relative humidity. The DSC result shows no degradation of thermal stability of the coated particles. Full article
Show Figures

Graphical abstract

16 pages, 1240 KiB  
Article
Mathematical Modeling of Liquid-fed Pulsed Plasma Thruster
by Kaartikey Misra
Aerospace 2018, 5(1), 13; https://doi.org/10.3390/aerospace5010013 - 22 Jan 2018
Cited by 5 | Viewed by 7934
Abstract
Liquid propellants are fast becoming attractive for pulsed plasma thrusters due to their high efficiency and low contamination issues. However, the complete plasma interaction and acceleration processes are still not very clear. Present paper develops a multi-layer numerical model for liquid propellant PPTs [...] Read more.
Liquid propellants are fast becoming attractive for pulsed plasma thrusters due to their high efficiency and low contamination issues. However, the complete plasma interaction and acceleration processes are still not very clear. Present paper develops a multi-layer numerical model for liquid propellant PPTs (pulsed plasma thrusters). The model is based on a quasi-steady flow assumption. The model proposes a possible acceleration mechanism for liquid-fed pulsed plasma thrusters and accurately predicts the propellant utilization capabilities and estimations for the fraction of propellant gas that is completely ionized and accelerated to high exit velocities. Validation of the numerical model and the assumptions on which the model is based on is achieved by comparing the experimental results and the simulation results for two different liquid-fed thrusters developed at the University of Tokyo. Simulation results shows that up-to 50 % of liquid propellant injected is completely ionized and accelerated to high exit velocities (>50 Km/s), whereas, neutral gas contribute to only 7 % of the total specific impulse and accelerated to low exit velocity (<4 Km/s). The model shows an accuracy up-to 92 % . Optimization methods are briefly discussed to ensure efficient propellant utilization and performance. The model acts as a tool to understand the background physics and to optimize the performance for liquid-fed PPTs. Full article
Show Figures

Figure 1

3888 KiB  
Article
Molecular Dynamics Electrospray Simulations of Coarse-Grained Ethylammonium Nitrate (EAN) and 1-Ethyl-3-Methylimidazolium Tetrafluoroborate (EMIM-BF4)
by Neil A. Mehta and Deborah A. Levin
Aerospace 2018, 5(1), 1; https://doi.org/10.3390/aerospace5010001 - 28 Dec 2017
Cited by 18 | Viewed by 7095
Abstract
In this work, the use of molecular dynamics as a predictive tool for modeling the atomistic behavior of electrospray propulsion is discussed. 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIM-BF 4 ) and ethylammonium nitrate (EAN) were considered as two limits of ionic liquid (IL) propellants that tend [...] Read more.
In this work, the use of molecular dynamics as a predictive tool for modeling the atomistic behavior of electrospray propulsion is discussed. 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIM-BF 4 ) and ethylammonium nitrate (EAN) were considered as two limits of ionic liquid (IL) propellants that tend to operate in an ion versus a droplet mode. The emission modes were found to depend on the electro-chemical properties of the IL propellant. The aprotic EMIM-BF 4 -based electrospray emitted primarily monomers and trimers as the dominant species and only small quantities of droplets. In contrast, trimers were the dominant emitted species in the protic EAN emissions with a significantly large contribution from droplets towards the total emission current, suggesting that EMIM-BF 4 -based colloid thrusters operate in ion mode and EAN-based devices operate in the droplet mode. Furthermore, the formation of the Taylor cone was found to depend on the mass flow rate and the external electric field strength. This paper provides a framework that can be extended for use to simulate any other ILs or their combinations. Full article
Show Figures

Figure 1

7456 KiB  
Article
High Fidelity Multi-Objective Design Optimization of a Downscaled Cusped Field Thruster
by Thomas Fahey, Angus Muffatti and Hideaki Ogawa
Aerospace 2017, 4(4), 55; https://doi.org/10.3390/aerospace4040055 - 18 Nov 2017
Cited by 11 | Viewed by 6469
Abstract
The Cusped Field Thruster (CFT) concept has demonstrated significantly improved performance over the Hall Effect Thruster and the Gridded Ion Thruster; however, little is understood about the complexities of the interactions and interdependencies of the geometrical, magnetic and ion beam properties of the [...] Read more.
The Cusped Field Thruster (CFT) concept has demonstrated significantly improved performance over the Hall Effect Thruster and the Gridded Ion Thruster; however, little is understood about the complexities of the interactions and interdependencies of the geometrical, magnetic and ion beam properties of the thruster. This study applies an advanced design methodology combining a modified power distribution calculation and evolutionary algorithms assisted by surrogate modeling to a multi-objective design optimization for the performance optimization and characterization of the CFT. Optimization is performed for maximization of performance defined by five design parameters (i.e., anode voltage, anode current, mass flow rate, and magnet radii), simultaneously aiming to maximize three objectives; that is, thrust, efficiency and specific impulse. Statistical methods based on global sensitivity analysis are employed to assess the optimization results in conjunction with surrogate models to identify key design factors with respect to the three design objectives and additional performance measures. The research indicates that the anode current and the Outer Magnet Radius have the greatest effect on the performance parameters. An optimal value for the anode current is determined, and a trend towards maximizing anode potential and mass flow rate is observed. Full article
Show Figures

Figure 1

Review

Jump to: Research

889 KiB  
Review
An Overview of Cube-Satellite Propulsion Technologies and Trends
by Akshay Reddy Tummala and Atri Dutta
Aerospace 2017, 4(4), 58; https://doi.org/10.3390/aerospace4040058 - 09 Dec 2017
Cited by 110 | Viewed by 24015
Abstract
CubeSats provide a cost effective means to perform scientific and technological studies in space. Due to their affordability, CubeSat technologies have been diversely studied and developed by educational institutions, companies and space organizations all over the world. The CubeSat technology that is surveyed [...] Read more.
CubeSats provide a cost effective means to perform scientific and technological studies in space. Due to their affordability, CubeSat technologies have been diversely studied and developed by educational institutions, companies and space organizations all over the world. The CubeSat technology that is surveyed in this paper is the propulsion system. A propulsion system is the primary mobility device of a spacecraft and helps with orbit modifications and attitude control. This paper provides an overview of micro-propulsion technologies that have been developed or are currently being developed for CubeSats. Some of the micro-propulsion technologies listed have also flown as secondary propulsion systems on larger spacecraft. Operating principles and key design considerations for each class of propulsion system are outlined. Finally, the performance factors of micro-propulsion systems have been summarized in terms of: first, a comparison of thrust and specific impulse for all propulsion systems; second, a comparison of power and specific impulse, as also thrust-to-power ratio and specific impulse for electric propulsion systems. Full article
Show Figures

Figure 1

Back to TopTop