Reprint

Advances in Sustainable Polymeric Materials

Edited by
April 2023
540 pages
  • ISBN978-3-0365-7371-7 (Hardback)
  • ISBN978-3-0365-7370-0 (PDF)

This book is a reprint of the Special Issue Advances in Sustainable Polymeric Materials that was published in

Chemistry & Materials Science
Engineering
Summary

"Advances in Sustainable Polymeric Materials" is a compilation of 22 articles highlighting the recent progress in the research and development of polymeric materials, with an emphasis on sustainability. Some papers focus on developing biodegradable plastics obtained from renewable sources such as starch and biomass waste. Other articles discuss modification techniques to improve the mechanical properties of biopolymers such as PLA and PHAs. The use of recycled polymeric materials in the construction industry is highlighted as a low-cost and environmentally friendly solution.Other studies include investigations on polymer-modified bitumen, a novel sound-absorbing material made from used palm-oil-based polyurethane foam and water hyacinth fibre composite, bio-based epoxy-lignin coatings, TiO2 nanocomposites, the photocatalytic activity of different polymeric composites, sustainable elastomers, interactions between vanillyl-alcohol-based epoxy and cross-linkers, polyvinyl chloride sorbent for rare earth elements, lignin-based thermoplastic, the chemical foaming process of polylactic acid, microencapsulation strategies for essential oils, electrochemical sensors for glucose determination, and an intelligent drug delivery system based on pH-sensitive polymeric formulations.It is important to recognize that the field of sustainable polymeric materials is vast and rapidly evolving, and while a single volume cannot entirely capture all the developments occurring in this field, this collection provides readers with a valuable introduction and overview of the topic.

Format
  • Hardback
License
© 2022 by the authors; CC BY-NC-ND license
Keywords
myrcene; sodium hydride; anionic polymerization; cellulose carbamate; NaOH/ZnO aqueous solution; freezing–thawing method; dissolution interaction; bioplastic; bio-based plastic; biodegradable plastic; bioeconomy; life cycle assessment; sustainability; polymer nanocomposites; TiO2 nanoparticle; organic–inorganic interfaces; surface modification of TiO2 nanoparticles; 2,5-thiophenedicarboxylic acid; thermal properties; barrier properties; mechanical properties; 2D-ordered structure; structure-property relationship; PGA; PLA; PCL; blends; valorization; water hyacinths; sugarcane bagasse; rice straw; biodegradation; bio–based epoxy resin; vanillyl alcohol; aliphatic amines; curing system; thermomechanical properties; recycled plastics; plastomers; asphalt; bitumen; recycling; sustainability; epoxidized linseed oil; lignin; composites; anti-corrosion coating; poly(lactic acid) (PLA); polyhydroxyalkanoates (PHAs); review; properties; plasticizers; polymer blends; fillers; polymer nanocomposites; degradation; sustainability; 3D printing; ultrasound; sago pith waste; sago starch; extraction yield; starch-based bioplastic; used palm oil; water hyacinth fiber; sound-absorbing material; polyurethane foam; starch-based bioplastic; nanofiller; bioplastic fabrication; plasticizer; mechanism; rare earth ions; cetylpyridinium bromide; polyvinylchloride; sorption; desorption; essential oils; extraction techniques; microencapsulation; controlled release; microcapsules; pharmacology; fly ash; end of life tire rubber; rubber-PET-HDPE-wood composites; wood waste; mechanical properties; electrochemical sensor; glucose sensor; PANI-MnBaO2; conducting polymer composite; cyclic voltammetry; linear sweep voltammetry; advanced oxidation; composites; dyes; organic pollutants; pharmaceutical compounds; photocatalysts; 5-amino salicylic acid; smart delivery system; sustainable polymers; triggered drug delivery; ulcerative colitis; flax yarn; lignin; bio-based thermoplastics; bio-based matrix material; yarn coating; extrusion; natural fibre; composite; solid-state shear pulverization; cryogenic milling; polylactic acid; foams; processing; semicrystalline polymers; compression molding; n/a