Next Article in Journal
PdxNiy/TiO2 Electrocatalysts for Converting Methane to Methanol in An Electrolytic Polymeric Reactor—Fuel Cell Type (PER-FC)
Next Article in Special Issue
Review of Biosurfactants Gas Hydrate Promoters
Previous Article in Journal
Techno-Economic Assessment of On-Site Production of Biomethane, Bioenergy, and Fertilizer from Small-Scale Anaerobic Digestion of Jabuticaba By-Product
Previous Article in Special Issue
Efficient Storage of Methane in Hydrate Form Using Soybean Powder
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Communication

Effect of Pressure on Hydrogen Isotope Fractionation in Methane during Methane Hydrate Formation at Temperatures Below the Freezing Point of Water

1
Environmental and Energy Resources Research Center, Kitami Institute of Technology, 165 Koen-cho, Kitami 090-8507, Japan
2
School of Earth, Energy and Environmental Engineering, Kitami Institute of Technology, 165 Koen-cho, Kitami 090-8507, Japan
3
National Metrology Institute of Japan (NMIJ), National Institute of Advanced Industrial Science and Technology (AIST), Central 5, Higashi 1-1-1, Tsukuba 305-8565, Japan
*
Author to whom correspondence should be addressed.
Methane 2023, 2(2), 129-136; https://doi.org/10.3390/methane2020010
Submission received: 19 February 2023 / Revised: 6 April 2023 / Accepted: 10 April 2023 / Published: 12 April 2023
(This article belongs to the Special Issue Perspective in Natural Gas Hydrate)

Abstract

:
Isotopic fractionation of methane between gas and solid hydrate phases provides data regarding hydrate-forming environments, but the effect of pressure on isotopic fractionation is not well understood. In this study, methane hydrates were synthesized in a pressure cell, and the hydrogen isotope compositions of the residual and hydrate-bound gases were determined. The δ2H of hydrate-bound methane formed below the freezing point of water was 5.7–10.3‰ lower than that of residual methane, indicating that methane hydrate generally encapsulates lighter molecules (CH4) instead of CH32H. The fractionation factors αH-V of the gas and hydrate phases were in the range 0.9881–0.9932 at a temperature and pressure of 223.3–268.2 K and 1.7–19.5 MPa, respectively. Furthermore, αH-V increased with increasing formation pressure, suggesting that the difference in the hydrogen isotopes of the hydrate-bound methane and surrounding methane yields data regarding the formation pressure. Although the differences in the hydrogen isotopes observed in this study are insignificant, precise analyses of the isotopes of natural hydrates in the same area enable the determination of the pressure during hydrate formation.

1. Introduction

Gas hydrates are host–guest compounds comprising hydrogen-bonded water cages containing guest molecules [1]. Natural gas hydrates occur in marine/lacustrine sediments and attract attention as unconventional energy resources [2,3] and greenhouse gas reservoirs [4].
Methane, which is a hydrocarbon, is a major component of natural gas, and the stable isotope ratio of methane is used to estimate its origin [5,6,7,8]. Since the stable isotope fractionation of methane caused by phase changes during methane hydrate formation may affect the interpretation of the gas origin, researchers quantitatively evaluate the carbon and hydrogen isotope fractionations of methane using synthetic methane hydrate formation. The hydrogen isotope ratio of the hydrate-bound gas is several ‰ lower than that of the residual gas [9], whereas stable isotope fractionation is negligible in terms of carbon isotope ratios [9,10]. Such stable isotope fractionation of guest gases during gas hydrate formation has been similarly investigated for ethane [9], carbon dioxide [11,12], hydrogen sulfide [13], and nitrogen [14].
In mixed-gas systems such as methane–ethane [15] or methane–carbon dioxide systems [16], ethane and carbon dioxide are more enriched than methane, because the equilibrium pressures of ethane and carbon dioxide hydrates are lower than those of methane hydrates. Even gas hydrates formed using high-purity gases are mixed gas hydrates comprising isotopologues of guest molecules. Similarly, the stable isotope fractionation of guest molecules during the formation of gas hydrates may be explained by the differences in the inclusion properties of isotopologues: CH32H is less included than CH4, with a difference of 4.8 ± 0.4‰ in their δ2H values at 274.2 K [9] (δ values are defined in the Section 3), which is consistent with the slightly higher equilibrium pressures of CH32H hydrates than those of CH4 hydrates [17]. Additionally, the negligible carbon isotope fractionation of methane during the formation of methane hydrates is consistent with the almost equal equilibrium pressures of the 13CH4 and 12CH4 hydrates [18].
Determination of the effects of temperature and pressure on the stable isotope fractionation of guest gases during gas hydrate formation is useful in reconstructing the environment wherein the natural gas hydrates were formed, e.g., the difference in the stable isotope ratios of hydrate-bound methane and those in the environment yields data regarding the formation depths of natural gas hydrates in submarine/lacustrine sediments and beneath permafrost layers. These data also provide a basis for examining the origins and formation processes of gas hydrates that may occur not only on Earth, but also in other planetary and satellite systems [19,20,21,22,23]. However, the effects of temperature and pressure on the stable isotope fractionation of guest gases during gas hydrate formation have not yet been investigated in detail. In a previous study [9], below the freezing point of water (243.7–265.2 K), the difference in the δ2H values of the residual and hydrate-bound gases was 8–11‰, which exceeds the value (4.8 ± 0.4‰) at 274.2 K. The effect of pressure on stable isotope fractionation is not reported.
The objective of this study is to clarify the effects of temperature and pressure on the stable isotope fractionation factor of hydrogen in methane during the formation of methane hydrate. In this study, we formed synthetic methane hydrate and investigated the differences in the hydrogen isotope ratios of methane in the hydrate-bound gas and residual gas around the crystals over the wide temperature range 223.3–268.2 K. Additionally, we investigated the effects of pressure on the hydrogen isotope fractionation of methane at different formation pressures in the range 1.7–19.5 MPa.

2. Results and Discussion

The stable isotope compositions are shown in Figure 1 and Table 1. Methane hydrates are formed in the respective temperature and pressure ranges of 223.3–268.2 K and 1.7–19.5 MPa. The hydrogen isotope ratios of the original (initial), residual, and hydrate-bound gases are −154.4 ± 0.3‰, −154.2 ± 0.5‰, and −163.4 ± 1.0‰, respectively, suggesting that the hydrate encapsulates lighter methane (Figure 1). As 91.2–99.8% of the methane introduced into the pressure cell remains in the cell as residual gas, the hydrogen isotope ratios of the original and residual gases are similar. The fractionation factor αH-V, which is defined in the Section 3 and calculated using these isotope ratio data, is 0.9907 ± 0.0014, which is similar to 0.9893 ± 0.0008 at 243.7–265.2 K and 3.3–5.6 MPa [9]. A total of 2 of the 25 samples were formed over respective formation times of 1 and 3 h (Table 1). Although these formation times are relatively shorter than those of the other samples (formation times of approximately 2 d) and the amounts of hydrates formed are small, αH-V remains the same at the same temperature and pressure.
αH-V was plotted as a function of the formation temperature, as shown in Figure 2. Over the pressure range of 4–6 MPa, αH-V is 0.9900 ± 0.0008 and increases slightly with temperature. Furthermore, αH-V varies with the formation pressure, and the pressure dependence of αH-V is shown in Figure 3. αH-V increases with increasing formation pressure. αH-V values at 5 and 20 MPa are approximately 0.990 and 0.993. These results suggest that hydrogen isotope fractionation decreases with increasing formation pressure.
Here, we discuss the possibility that the hydrogen isotope fractionation may decrease due to kinetic effects. The internal pressure of the pressure cell decreases slightly due to the formation of the methane hydrate. The average rate of the decrease in pressure ΔP/Δt over 5 h was plotted as a function of the formation pressure (Figure 4). The ΔP/Δt values are approximately −0.01 and −0.02 MPa h–1 at 243.2–243.3 and 262.9–263.1 K, respectively. The rate of hydrate formation is independent of pressure and increases at high temperatures. Therefore, the increase in αH-V with increasing pressure (Figure 3) may be attributed to the increase in the formation pressure instead of the increase in ΔP/Δt.
Hence, the hydrogen isotope fractionation of methane during methane hydrate formation clearly depends on the formation pressure. In conclusion, differences in the isotopic ratios of hydrate-bound methane and that surrounding the crystals yield temperature and pressure data regarding hydrate formation.
The isotopic ratios of hydrate-bound gases are useful not only in identifying gas sources, but also in evaluating the formation processes of naturally occurring gas hydrates [24,25,26,27,28,29]. Because isotopic fractionation of hydrogen in hydrocarbons occurs during gas hydrate formation, isotopic differences between the hydrate-bound gas and dissolved gas in pore water provide data for use in evaluating whether the current gas in the pore water is a contributor to the hydrate-bound gas, e.g., isotopic differences should be observed if the hydrates are formed and maintained, whereas no differences should be observed if they decompose [30,31,32]. Furthermore, an isotopic difference is useful in determining the environment wherein the hydrates were formed, because it yields data regarding the pressure at the time of hydrate formation. However, collecting the gas in the environment at the time of formation, along with the hydrate-bound gas, is necessary. The findings of this study are limited to pressures of <20 MPa and temperatures below the freezing point of water. Studies should be conducted under higher pressures and over wider temperature ranges to understand not only natural gas hydrates beneath the seafloor, but also methane hydrates that may occur on extraterrestrial planets [19,20] and their satellites [21,22,23]. Further studies regarding the effects of impurities (salinity), crystal size, and sediments on isotopic fractionation should also be conducted.

3. Materials and Methods

The experimental systems and equipment used were the same as those used in our previous work [33], and the methane hydrates were synthesized in a pressure cell (internal volume: 42 mL) using research-grade methane (purity: 99.99%, Takachiho Chemical Industrial, Tokyo, Japan) as the guest gas. Fine ice powder (0.7 g) was placed in the cell, and the air within the cell was vacuumed at 77 K. An appropriate amount of methane was introduced into the cell, which was then immersed in a temperature-controlled liquid bath (243–268 K) or placed in a cold room (224–243 K). The methane trapped within the cell sublimated and reached the desired pressure at each temperature within 15 min. Hydrate formation was confirmed by a decrease in the pressure at the controlled temperature, and the formation times were approximately 2 d, except for those of two samples used in verifying the kinetic effect (1 and 3 h at 263.0 K, Table 1). The temperature and pressure of the cell were measured using a thermistor (D617, Technol Seven, Tokyo, Japan) and pressure gauge (AP-14S, Keyence, Osaka, Japan), respectively, and the respective uncertainties of the temperature and pressure measurements were 0.1 K and 0.05 MPa.
Residual gas that was not encapsulated in the gas hydrate was collected while ensuring that the pressure was maintained above the equilibrium pressure of the methane hydrate. Subsequently, the cell was quenched at 77 K, and the hydrate sample was recovered. The hydrate was placed in a vacuum line, and liquid nitrogen and solid methane contaminating the hydrate samples were meticulously evaporated/sublimated using a vacuum pump. After verifying that the liquid nitrogen and solid methane were completely evaporated/sublimated by measuring the internal pressure of the vacuum line, the sample tube was heated to decompose the methane hydrate. Residual gas was introduced into a separate line, and the respective gas samples were collected using a gas-tight microsyringe.
Each gas was introduced into a continuous-flow isotope ratio mass spectrometer (Delta V Advantage, Thermo Fisher Scientific, Waltham, MA, USA) coupled with a gas chromatograph (TRACE GC Ultra, Thermo Fisher Scientific) equipped with a CP-PoraPLOT Q capillary column (length: 25 m, inner diameter: 0.32 mm, film thickness: 10 μm, Agilent Technologies, Santa Clara, CA, USA). The hydrogen isotope compositions are reported as δ values (‰).
δ   = R s a m p l e R s t a n d a r d R s t a n d a r d × 1000
where R denotes the 2H/1H ratio. δ2H is obtained by referring to the Vienna Standard Mean Ocean Water standards determined using National Institute of Standards and Technology RM8561 (NGS3), and the analytical precision is 0.6‰. The residual, hydrate-bound, original (initial), and standard gases were measured sequentially, and six measurements were performed for each gas sample to determine the mean and standard deviation of the stable isotope ratio of hydrogen. αH−V is defined as
α H V = R h y d r a t e R v a p o r
where Rhydrate and Rvapor denote the 2H/1H ratios of the hydrate-bound and residual gases, respectively. As the methane hydrates are formed in a finite, closed system, the Rayleigh process [34] is applied, and the relationship between αH-V and the average isotope ratios of the hydrate-bound and residual gases is expressed as
R ¯ h y d r a t e R ¯ v a p o r = 1 f α H V 1 f f α H V 1
where R ¯ hydrate and R ¯ vapor denote the average 2H/1H ratios of the hydrate-bound and residual gases, respectively, which are measured using a continuous-flow isotope ratio mass spectrometer. f is the fraction of residual methane gas within the cell, which is calculated using the decrease in pressure due to hydrate formation.

4. Conclusions

In this study, the hydrogen isotope compositions of residual and hydrate-bound gases were measured to understand the isotopic fractionation of methane between the gas and solid phases and collect data regarding the environments wherein hydrates form in nature. The δ2H of hydrate-bound methane formed below the freezing point of water was 5.7–10.3‰ lower than that of residual methane, indicating that methane hydrate generally encapsulates lighter molecules (CH4) instead of CH32H. The αH-V values between the gas and hydrate phases were in the range 0.9881–0.9932 at a temperature and pressure of 223.3–268.2 K and 1.7–19.5 MPa, respectively. Moreover, αH-V increased with the formation pressure but was primarily unaffected by temperature, suggesting that the difference in the hydrogen isotopes of the hydrate-bound methane and surrounding methane yields data regarding the formation pressure. Accordingly, when hydrate-bound methane and environmental methane are obtained, the hydrogen isotope fractionation of methane during the formation of methane hydrate may be an indicator of the environment wherein the natural gas hydrates formed.

Author Contributions

A.H. designed the experiments and supervised this project; T.N. and K.T. prepared the hydrate samples and analyzed the gas data; and S.T. reviewed and edited the original draft. All authors have read and agreed to the published version of the manuscript.

Funding

This work was financially supported by the Grant-in-Aid for Scientific Research (C) 22K03712 of the Japan Society for the Promotion of Science (JSPS).

Institutional Review Board Statement

Not applicable.

Informed Consent Statement

Not applicable.

Data Availability Statement

Available from the authors.

Acknowledgments

The authors gratefully acknowledge Daisuke Yahagi for technical support during the experiments.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Sloan, E.D.; Koh, C.A. Clathrate Hydrates of Natural Gases, 3rd ed.; CRC Press Taylor and Francis Group: Boca Raton, FL, USA, 2008. [Google Scholar]
  2. Makogon, Y.F.; Holditch, S.A.; Makogon, T.Y. Natural gas-hydrates—A potential energy source for the 21st century. J. Pet. Sci. Eng. 2007, 56, 14–31. [Google Scholar] [CrossRef]
  3. Boswell, R.; Collett, T.S. Current perspectives on gas hydrate resources. Energy Environ. Sci. 2011, 4, 1206–1215. [Google Scholar] [CrossRef]
  4. Kennedy, M.; Mrofka, D.; Von Der Borch, C. Snowball Earth termination by destabilization of equatorial permafrost methane clathrate. Nature 2008, 453, 642–645. [Google Scholar] [CrossRef] [PubMed]
  5. Whiticar, M.J.; Faber, E.; Schoell, M. Biogenic methane formation in marine and freshwater environments: CO2 reduction vs. acetate fermentation—Isotope evidence. Geochim. Cosmochim. Acta 1986, 50, 693–709. [Google Scholar] [CrossRef]
  6. Schoell, M. Multiple origins of methane in the earth. Chem. Geol. 1988, 71, 1–10. [Google Scholar] [CrossRef]
  7. Whiticar, M.J. Carbon and hydrogen isotope systematics of bacterial formation and oxidation of methane. Chem. Geol. 1999, 161, 291–314. [Google Scholar] [CrossRef]
  8. Milkov, A.V.; Etiope, G. Revised genetic diagrams for natural gases based on a global dataset of >20,000 samples. Org. Geochem. 2018, 125, 109–120. [Google Scholar] [CrossRef]
  9. Hachikubo, A.; Kosaka, T.; Kida, M.; Krylov, A.; Sakagami, H.; Minami, H.; Takahashi, N.; Shoji, H. Isotopic fractionation of methane and ethane hydrates between gas and hydrate phases. Geophys. Res. Lett. 2007, 34, L21502. [Google Scholar] [CrossRef]
  10. Lapham, L.L.; Wilson, R.M.; Chanton, J.P. Pressurized laboratory experiments show no stable carbon isotope fractionation of methane during gas hydrate dissolution and dissociation. Rapid Commun. Mass Spectrom. 2012, 26, 32–36. [Google Scholar] [CrossRef]
  11. Luzi, M.; Schicks, J.M.; Erzinger, J. Carbon isotopic fractionation of synthetic methane and carbon dioxide hydrates. In Proceedings of the 7th International Conference on Gas Hydrates (ICGH2011), Edinburgh, Scotland, UK, 17–21 July 2011. [Google Scholar]
  12. Kimura, H.; Fuseya, G.; Takeya, S.; Hachikubo, A. Carbon isotope fractionation during the formation of CO2 hydrate and equilibrium pressures of 12CO2 and 13CO2 hydrates. Molecules 2021, 26, 4215. [Google Scholar] [CrossRef]
  13. Carvajal-Ortiz, H.; Pratt, L.M. Influences of salinity and temperature on the stable isotopic composition of methane and hydrogen sulfide trapped in pressure-vessel hydrates. Geochim. Cosmochim. Acta 2013, 118, 72–84. [Google Scholar] [CrossRef]
  14. Hachikubo, A.; Takizawa, K.; Takeya, S. Stable isotope fractionation of nitrogen between gas and hydrate phases. J. Chem. Eng. Data 2023, 68, 694–697. [Google Scholar] [CrossRef]
  15. Deaton, W.M.; Frost, E.M. Gas Hydrates and Their Relation to the Operation of Natural-Gas Pipe Lines; American Gas Association: Washington, DC, USA, 1946; Volume 8. [Google Scholar]
  16. Adisasmito, S.; Frank, R.J.; Sloan, E.D. Hydrates of carbon dioxide and methane mixtures. J. Chem. Eng. Data 1991, 36, 68–71. [Google Scholar] [CrossRef]
  17. Ozeki, T.; Kikuchi, Y.; Takeya, S.; Hachikubo, A. Phase equilibrium of isotopologue methane hydrates enclathrated CH3D and CD4. J. Chem. Eng. Data 2018, 63, 2266–2270. [Google Scholar] [CrossRef]
  18. Hachikubo, A.; Fuseya, G.; Kikuchi, Y.; Takeya, S. Phase equilibrium of methane hydrate encapsulated isotopologue 13CH4 and singly deuterated methane. J. Chem. Eng. Data 2021, 66, 4663–4669. [Google Scholar] [CrossRef]
  19. Pellenbarg, R.E.; Max, M.D.; Clifford, S.M. Methane and carbon dioxide hydrates on Mars: Potential origins, distribution, detection, and implications for future in situ resource utilization. J. Geophys. Res. 2003, 108, 8042. [Google Scholar] [CrossRef]
  20. Kamata, S.; Nimmo, F.; Sekine, Y.; Kuramoto, K.; Noguchi, N.; Kimura, J.; Tani, A. Pluto’s ocean is capped and insulated by gas hydrates. Nat. Geosci. 2019, 12, 407–410. [Google Scholar] [CrossRef]
  21. Loveday, J.S.; Nelmes, R.J.; Guthrie, M.; Belmonte, S.A.; Allan, D.R.; Klug, D.D.; Tse, J.S.; Handa, Y.P. Stable methane hydrate above 2 GPa and the source of Titan’s atmospheric methane. Nature 2001, 410, 661–663. [Google Scholar] [CrossRef]
  22. Prieto-Ballesteros, O.; Kargel, J.S.; Fernández-Sampedro, M.; Selsis, F.; Martínez, E.S.; Hogenboom, D.L. Evaluation of the possible presence of clathrate hydrates in Europa’s icy shell or seafloor. Icarus 2005, 177, 491–505. [Google Scholar] [CrossRef]
  23. Bouquet, A.; Mousis, O.; Waite, J.H.; Picaud, S. Possible evidence for a methane source in Enceladus’ ocean. Geophys. Res. Lett. 2015, 42, 1334–1339. [Google Scholar] [CrossRef]
  24. Pape, T.; Geprägs, P.; Hammerschmidt, S.; Wintersteller, P.; Wei, J.; Fleischmann, T.; Bohrmann, G.; Kopf, A.J. Hydrocarbon seepage and its sources at mud volcanoes of the Kumano forearc basin, Nankai Trough subduction zone. Geochem. Geophys. Geosyst. 2014, 15, 2180–2194. [Google Scholar] [CrossRef]
  25. Meister, P.; Liu, B.; Khalili, A.; Böttcher, M.E.; Jørgensen, B.B. Factors controlling the carbon isotope composition of dissolved inorganic carbon and methane in marine porewater: An evaluation by reaction-transport modelling. J. Mar. Syst. 2019, 200, 103227. [Google Scholar] [CrossRef] [Green Version]
  26. Pape, T.; Haeckel, M.; Riedel, M.; Kölling, M.; Schmidt, M.; Wallmann, K.; Bohrmann, G. Formation pathways of light hydrocarbons in deep sediments of the Danube deep-sea fan, western Black Sea. Mar. Pet. Geol. 2020, 122, 104627. [Google Scholar] [CrossRef]
  27. Snyder, G.T.; Sano, Y.; Takahata, N.; Matsumoto, R.; Kakizaki, Y.; Tomaru, H. Magmatic fluids play a role in the development of active gas chimneys and massive gas hydrates in the Japan Sea. Chem. Geol. 2020, 535, 119462. [Google Scholar] [CrossRef]
  28. Lalk, E.; Pape, T.; Gruen, D.S.; Kaul, N.; Karolewski, J.S.; Bohrmann, G.; Ono, S. Clumped methane isotopologue-based temperature estimates for sources of methane in marine gas hydrates and associated vent gases. Geochim. Cosmochim. Acta 2022, 327, 276–297. [Google Scholar] [CrossRef]
  29. Hachikubo, A.; Minami, H.; Sakagami, H.; Yamashita, S.; Krylov, A.; Kalmychkov, G.; Poort, J.; De Batist, M.; Manakov, A.; Khlystov, O. Characteristics and varieties of gases enclathrated in natural gas hydrates retrieved at Lake Baikal. Sci. Rep. 2023, 13, 4440. [Google Scholar] [CrossRef] [PubMed]
  30. Hachikubo, A.; Khlystov, O.; Manakov, A.; Kida, M.; Krylov, A.; Sakagami, H.; Minami, H.; Takahashi, N.; Shoji, H.; Kalmychkov, G.; et al. Model of formation of double structure gas hydrates in Lake Baikal based on isotopic data. Geophys. Res. Lett. 2009, 36, L18504. [Google Scholar] [CrossRef] [Green Version]
  31. Hachikubo, A.; Krylov, A.; Sakagami, H.; Minami, H.; Nunokawa, Y.; Shoji, H.; Matveeva, T.; Jin, Y.K.; Obzhirov, A. Isotopic composition of gas hydrates in subsurface sediments from offshore Sakhalin Island, Sea of Okhotsk. Geo-Mar. Lett. 2010, 30, 313–319. [Google Scholar] [CrossRef]
  32. Hachikubo, A.; Minami, H.; Yamashita, S.; Khabuev, A.; Krylov, A.; Kalmychkov, G.; Poort, J.; De Batist, M.; Chenskiy, A.; Manakov, A.; et al. Characteristics of hydrate-bound gas retrieved at the Kedr mud volcano (southern Lake Baikal). Sci. Rep. 2020, 10, 14747. [Google Scholar] [CrossRef]
  33. Hachikubo, A.; Fuseya, G.; Sugimori, E.; Takeya, S. Effect of pressure on the hydration number of argon hydrate. J. Chem. Eng. Data 2022, 67, 3757–3762. [Google Scholar] [CrossRef]
  34. Hoefs, J. Stable Isotope Geochemistry, 5th ed.; Springer: Berlin/Heidelberg, Germany, 2004. [Google Scholar]
Figure 1. δ2H values of the original (initial), residual, and hydrate-bound methane represented using gray squares, blue circles, and green diamonds, respectively.
Figure 1. δ2H values of the original (initial), residual, and hydrate-bound methane represented using gray squares, blue circles, and green diamonds, respectively.
Methane 02 00010 g001
Figure 2. Fractionation factor αH-V as a function of formation temperature. Colored circles: this study; gray triangles: literature values [9].
Figure 2. Fractionation factor αH-V as a function of formation temperature. Colored circles: this study; gray triangles: literature values [9].
Methane 02 00010 g002
Figure 3. Fractionation factor αH-V as a function of formation pressure. Light blue circles: 224.2–228.7 K; yellow circles: 243.2–243.3 K; pink circles: 262.9–263.1 K; open circles: other temperatures in this study; gray triangles: literature values [9].
Figure 3. Fractionation factor αH-V as a function of formation pressure. Light blue circles: 224.2–228.7 K; yellow circles: 243.2–243.3 K; pink circles: 262.9–263.1 K; open circles: other temperatures in this study; gray triangles: literature values [9].
Methane 02 00010 g003
Figure 4. Average rate of the decrease in pressure (ΔP/Δt) over 5 h. Yellow circles: 243.2–243.3 K; pink circles: 262.9–263.1 K.
Figure 4. Average rate of the decrease in pressure (ΔP/Δt) over 5 h. Yellow circles: 243.2–243.3 K; pink circles: 262.9–263.1 K.
Methane 02 00010 g004
Table 1. Stable isotope compositions of the original (initial), residual, and hydrate-bound gases; the fractions of the residual gases f; and the hydrogen isotope fractionation factors αH-V at various formation temperatures and pressures.
Table 1. Stable isotope compositions of the original (initial), residual, and hydrate-bound gases; the fractions of the residual gases f; and the hydrogen isotope fractionation factors αH-V at various formation temperatures and pressures.
T/K ap/MPa aOriginal Gas [‰]Residual Gas [‰]Hydrate-Bound Gas [‰]fαH-V
224.21.7−154.1 ± 0.5−153.0 ± 0.2−162.7 ± 0.50.9120.9891 ± 0.0006
224.84.7−153.6 ± 0.9−153.1 ± 0.5−163.4 ± 0.70.9660.9881 ± 0.0005
229.08.4−154.1 ± 0.2−153.9 ± 0.2−161.8 ± 0.30.9810.9907 ± 0.0005
228.711.7−154.0 ± 0.2−153.9 ± 0.2−160.3 ± 0.30.9860.9925 ± 0.0005
223.319.2−153.5 ± 0.4−153.4 ± 0.4−159.4 ± 0.40.9910.9929 ± 0.0005
243.21.7−154.4 ± 0.4−153.3 ± 0.3−162.7 ± 0.40.9410.9892 ± 0.0004
243.23.2−153.8 ± 0.2−153.0 ± 0.4−162.7 ± 0.30.9550.9889 ± 0.0003
243.25.0−153.7 ± 0.4−153.5 ± 0.3−162.3 ± 0.30.9630.9898 ± 0.0001
243.35.1−153.9 ± 0.5−153.4 ± 0.4−161.8 ± 0.40.9670.9902 ± 0.0007
243.28.8−153.7 ± 0.2−153.7 ± 0.3−161.3 ± 0.30.9880.9911 ± 0.0003
243.214.4−154.1 ± 0.2−153.9 ± 0.4−160.4 ± 0.50.9920.9923 ± 0.0003
243.216.2−154.0 ± 0.2−154.0 ± 0.3−160.3 ± 0.40.9900.9926 ± 0.0002
243.219.5−154.2 ± 0.3−154.2 ± 0.4−160.0 ± 0.20.9900.9932 ± 0.0003
248.15.1−153.9 ± 0.7−153.4 ± 0.5−162.2 ± 0.60.9660.9897 ± 0.0006
253.14.9−154.2 ± 0.4−153.6 ± 0.1−162.2 ± 0.50.9620.9901 ± 0.0006
258.25.0−154.1 ± 0.5−154.0 ± 0.3−162.3 ± 0.40.9680.9903 ± 0.0006
263.11.9−153.8 ± 0.6−153.1 ± 0.2−162.0 ± 0.60.9420.9899 ± 0.0005
263.12.6−154.4 ± 0.2−153.3 ± 0.3−162.2 ± 0.40.9440.9898 ± 0.0003
263.13.2−153.7 ± 0.6−152.4 ± 0.4−161.2 ± 0.20.9250.9899 ± 0.0003
263.15.1−152.9 ± 0.8−152.2 ± 1.0−160.7 ± 0.90.9620.9902 ± 0.0007
263.05.3−154.2 ± 0.6−153.8 ± 0.6−162.0 ± 0.50.998 b0.9903 ± 0.0006
263.05.4−153.4 ± 0.9−153.0 ± 1.4−161.0 ± 1.20.989 c0.9905 ± 0.0007
262.99.1−154.2 ± 0.3−154.1 ± 0.6−161.5 ± 0.20.9820.9913 ± 0.0006
263.113.6−154.0 ± 0.3−153.9 ± 0.3−160.0 ± 0.50.9880.9928 ± 0.0008
268.25.9−153.8 ± 0.8−153.8 ± 0.9−161.6 ± 0.90.9730.9909 ± 0.0009
a The uncertainties of T and p are 0.1 K and 0.05 MPa, respectively. Formation time of b 1 or c 3 h.
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Hachikubo, A.; Nezu, T.; Takizawa, K.; Takeya, S. Effect of Pressure on Hydrogen Isotope Fractionation in Methane during Methane Hydrate Formation at Temperatures Below the Freezing Point of Water. Methane 2023, 2, 129-136. https://doi.org/10.3390/methane2020010

AMA Style

Hachikubo A, Nezu T, Takizawa K, Takeya S. Effect of Pressure on Hydrogen Isotope Fractionation in Methane during Methane Hydrate Formation at Temperatures Below the Freezing Point of Water. Methane. 2023; 2(2):129-136. https://doi.org/10.3390/methane2020010

Chicago/Turabian Style

Hachikubo, Akihiro, Taichi Nezu, Kaede Takizawa, and Satoshi Takeya. 2023. "Effect of Pressure on Hydrogen Isotope Fractionation in Methane during Methane Hydrate Formation at Temperatures Below the Freezing Point of Water" Methane 2, no. 2: 129-136. https://doi.org/10.3390/methane2020010

Article Metrics

Back to TopTop