Next Article in Journal
Symmetric and Asymmetric Supercapacitors of ITO Glass and Film Electrodes Consisting of Carbon Dot and Magnetite
Previous Article in Journal
Electrical Modeling and Impedance Spectra of Lithium-Ion Batteries and Supercapacitors
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Correction

Correction: Vogt et al. Production and Characterisation of Fibre-Reinforced All-Solid-State Electrodes and Separator for the Application in Structural Batteries. Batteries 2022, 8, 55

1
Cluster of Excellence SE²A—Sustainable and Energy-Efficient Aviation, Technische Universität Braunschweig, Hermann-Blenk-Str. 42, 38108 Braunschweig, Germany
2
Institute for Particle Technology (IPAT), Technische Universität Braunschweig, Volkmaroder Str. 5, 38104 Braunschweig, Germany
*
Author to whom correspondence should be addressed.
Batteries 2023, 9(3), 161; https://doi.org/10.3390/batteries9030161
Submission received: 10 January 2023 / Accepted: 10 February 2023 / Published: 8 March 2023

Text Correction

There was an error in the original publication [1]. It was incorrectly stated that “Lifepower P2S” and not “Lifepower P2” was used as the active material.
A correction has been made to 2. Materials and Methods, 2.1. Materials, first paragraph:
“Style 462 2/2 twill weave carbon fibre from C.Cramer GmbH & Co.KG (Heek, Germany) with an areal weight of 245 g m−2 and a nominal thickness of 400 μm was used as the fibre reinforcement for the electrodes. The carbon fibre textile is woven out of Teijin Carbon Tenaxtm-E HTA40 200 tex filament yarn. A standard modulus yarn with 3000 filaments sized with 1.3 wt.% epoxy-based coating. For the structural separator, glass fibres of the type Interglass 02034 plain weave with an areal weight of 25 g m−2 and a thickness of 30 μm were used. For the structural battery composite demonstrator, Interglas 91111 plain weave with an areal weight of 105 g m−2 was used as the outer layer. Epoxy resin L, hardener EPH 161, and supporting materials for the composite integration (fleece, peel ply, vacuum bagging film, vacuum sealing tape, tubing, and tape) were obtained from R&G Faserverbundwerkstoffe GmbH (Waldenbuch, Germany). Chemlease 255 release agent was obtained from Chem-Trend L.P. (Maisach Gernlinden, Germany), Lifepower P2 LFP with a nominal capacity of 156 mA h g−1 from Johnson Matthey (London, UK), Polyoxtm WSR 205 PEO with a molecular weight of 600 kg mol−1 from DOW (Midland, MI, USA), Lithium bis(trifluoromethanesulfonyl)imide 99.9% Extra-Dry with 20 ppm maximum water content, from Solvionic SA (Toulouse, France), and a conductive carbon C-NERGY SUPER C65 from Imerys Graphite & Carbon Belgium SA (Willebroek, Belgium). A polybutylene terephthalate (PBT)—PEO block copolymer from DSM Engineering Materials (Geleen, Netherlands) was used for the preparation of a polymer film separator. Acetonitrile with a water content less than 10 ppm was obtained from Carl Roth GmbH + Co. KG (Karlsruhe, Germany), copper foil with a 60 μm lithium coating from Goodfellow Cambridge Ltd. (Huntingdon, UK), and a 10 μm thick copper foil from Carl Schlenk AG (Roth, Germany). Coin cell cases, a stainless steel spacer, and wave springs were acquired from Shandong Gelon Lib Co., Ltd. (Linyi, China). All materials, with the exception of the acetonitrile, were dried at 40 °C in a vacuum chamber for at least 4 h.”
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.

Reference

  1. Vogt, D.; Michalowski, P.; Kwade, A. Production and Characterisation of Fibre-Reinforced All-Solid-State Electrodes and Separator for the Application in Structural Batteries. Batteries 2022, 8, 55. [Google Scholar] [CrossRef]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Share and Cite

MDPI and ACS Style

Vogt, D.; Michalowski, P.; Kwade, A. Correction: Vogt et al. Production and Characterisation of Fibre-Reinforced All-Solid-State Electrodes and Separator for the Application in Structural Batteries. Batteries 2022, 8, 55. Batteries 2023, 9, 161. https://doi.org/10.3390/batteries9030161

AMA Style

Vogt D, Michalowski P, Kwade A. Correction: Vogt et al. Production and Characterisation of Fibre-Reinforced All-Solid-State Electrodes and Separator for the Application in Structural Batteries. Batteries 2022, 8, 55. Batteries. 2023; 9(3):161. https://doi.org/10.3390/batteries9030161

Chicago/Turabian Style

Vogt, Daniel, Peter Michalowski, and Arno Kwade. 2023. "Correction: Vogt et al. Production and Characterisation of Fibre-Reinforced All-Solid-State Electrodes and Separator for the Application in Structural Batteries. Batteries 2022, 8, 55" Batteries 9, no. 3: 161. https://doi.org/10.3390/batteries9030161

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop