Next Issue
Volume 9, April
Previous Issue
Volume 9, February
 
 

Aerospace, Volume 9, Issue 3 (March 2022) – 58 articles

Cover Story (view full-size image): The strong growth rate of the aviation industry has created significant challenges in terms of environmental impact. Air traffic contributes to climate change through the emission of carbon dioxide (CO2) and other non-CO2 effects, and the associated climate impact is expected to soar further. The climate impact associated with non-CO2 emissions, being responsible for two-thirds of aviation radiative forcing, varies significantly with geographic location, altitude, and time of emission. Consequently, these effects can be reduced by planning proper climate-aware trajectories. To investigate these possibilities, this paper presents a survey on operational strategies proposed in the literature to mitigate aviation’s climate impact. Drawing upon this analysis, future lines of research on this topic are delineated. View this paper.
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list.
  • You may sign up for e-mail alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.
Order results
Result details
Section
Select all
Export citation of selected articles as:
17 pages, 4679 KiB  
Article
Research on the Identification of Pilots’ Fatigue Status Based on Functional Near-Infrared Spectroscopy
by Ting Pan, Haibo Wang, Haiqing Si, Haibo Liu and Mengyue Xu
Aerospace 2022, 9(3), 173; https://doi.org/10.3390/aerospace9030173 - 21 Mar 2022
Cited by 7 | Viewed by 2617
Abstract
Fatigue can lead to sluggish responses, misjudgments, flight illusions and other problems for pilots, which could easily bring about serious flight accidents. In this paper, a wearable functional near-infrared spectroscopy (fNIRS) device was used to record the changes of hemoglobin concentration of pilots [...] Read more.
Fatigue can lead to sluggish responses, misjudgments, flight illusions and other problems for pilots, which could easily bring about serious flight accidents. In this paper, a wearable functional near-infrared spectroscopy (fNIRS) device was used to record the changes of hemoglobin concentration of pilots during flight missions. The data was pre-processed, and 1080 valid samples were determined. Then, mean value, variance, standard deviation, kurtosis, skewness, coefficient of variation, peak value, and range of oxyhemoglobin (HbO2) in each channel were extracted. These indexes were regarded as the input of a stacked denoising autoencoder (SDAE) and were used to train the identification model of pilots’ fatigue state. The identification model of pilots’ fatigue status was established. The identification accuracy of the SDAE model was 91.32%, which was 23.26% and 15.97% higher than that of linear discriminant analysis (LDA) models and support vector machines (SVM) models, respectively. Results show that the SDAE model established in our study has high identification accuracy, which can accurately identify different fatigue states of pilots. Identification of pilots’ fatigue status based on fNIRS has important practical significance for reducing flight accidents caused by pilot fatigue. Full article
(This article belongs to the Section Air Traffic and Transportation)
Show Figures

Figure 1

25 pages, 14978 KiB  
Article
The Control of Corner Separation with Parametric Suction Side Corner Profiling on a High-Load Compressor Cascade
by Xiangjun Li, Jiezhong Dong, Hua Chen and Huawei Lu
Aerospace 2022, 9(3), 172; https://doi.org/10.3390/aerospace9030172 - 21 Mar 2022
Cited by 4 | Viewed by 2120
Abstract
Nowadays, with the increase of the thrust-to-weight ratio of the aero engines, the high aerodynamic load has made corner separation an issue for axial compressors. The complex three-dimensional flow field makes it challenging to suppress the corner separation, especially considering the performance at [...] Read more.
Nowadays, with the increase of the thrust-to-weight ratio of the aero engines, the high aerodynamic load has made corner separation an issue for axial compressors. The complex three-dimensional flow field makes it challenging to suppress the corner separation, especially considering the performance at multi-working conditions. To suppress the corner separation and reduce loss, the investigation in this paper proposed a new parametric suction side corner profiling method, which includes few variables but enables the flexible variation of the shape. A bi-objective auto-optimization design process for the corner profiling was carried out on a high-load linear compressor cascade, with the companion of end wall and blade profiling. The aim was to investigate the effective flow control rules for the corner separation and practical design guidelines for its geometry under multiple working conditions. The numerical results identified that the suction side corner profiling brings a much more dominant effect to corner separation than end wall profiling and blade profiling. The most critical flow control rule is to accelerate the climbing second flow on the bottom of the suction surface to suppress the reverse trend of the boundary layer and further relieve the corner separation. In addition, the design point and near-stall point have different well-fitting thicknesses and axial positions. A medium value between the design and near-stall well-fitting parameters will make the suction side corner profiling a best-matching case for a medium inflow condition and adequate performance at a range of conditions. Full article
(This article belongs to the Special Issue Fluid Flow Mechanics)
Show Figures

Figure 1

24 pages, 6062 KiB  
Article
A Coupled LES-Synthetic Turbulence Method for Jet Noise Prediction
by Joshua D. Blake, Adrian Sescu, David Thompson and Yuji Hattori
Aerospace 2022, 9(3), 171; https://doi.org/10.3390/aerospace9030171 - 21 Mar 2022
Viewed by 2109
Abstract
Large-eddy simulation (LES)-based jet noise predictions do not resolve the entire broadband noise spectra, often under-predicting high frequencies that correspond to un-resolved small-scale turbulence. The coupled LES-synthetic turbulence (CLST) model is presented which aims to model the missing high frequencies. The CLST method [...] Read more.
Large-eddy simulation (LES)-based jet noise predictions do not resolve the entire broadband noise spectra, often under-predicting high frequencies that correspond to un-resolved small-scale turbulence. The coupled LES-synthetic turbulence (CLST) model is presented which aims to model the missing high frequencies. The CLST method resolves large-scale turbulent fluctuations from coarse-grid large-eddy simulations (CLES) and models small-scale fluctuations generated by a synthetic eddy method (SEM). Noise is predicted using a formulation of the linearized Euler equations (LEE), where the acoustic waves are generated by source terms from the combined fluctuations of the CLES and the stochastic fields. Sweeping and straining of the synthetic eddies are accounted for by convecting eddies with the large turbulent scales from the CLES flow field. The near-field noise of a Mach 0.9 jet at a Reynolds number of 100,000 is predicted with LES. A high-order numerical algorithm, involving a dispersion relation preserving scheme for spatial discretization and an Adams–Bashforth scheme for time marching, is used for both LES and LEE solvers. Near-field noise spectra from the LES solver are compared to published results. Filtering is applied to the LES flow field to produce an under-resolved CLES flow field, and a comparison to the un-filtered LES spectra reveals the missing noise for this case. The CLST method recovers the filtered high-frequency content, agreeing well with the spectra from LES and showing promise at modeling the high-frequency range in the acoustic noise spectrum at a reasonable expense. Full article
(This article belongs to the Special Issue Aircraft Noise)
Show Figures

Figure 1

20 pages, 10860 KiB  
Article
Effects of Freezing Temperature and Salinity on the Adhesion Shear Strength of Amphibious Aircraft Tires under Static Icing
by Yongjie Zhang, Yunhui Zhang, Guisen Luo and Bo Cui
Aerospace 2022, 9(3), 170; https://doi.org/10.3390/aerospace9030170 - 20 Mar 2022
Cited by 4 | Viewed by 1961
Abstract
This research investigates the effects of freezing temperature and salinity on the adhesion shear strength of amphibious aircraft tires under static icing. It found that the lower the freezing temperature, the greater the ice adhesion shear strength, and the higher the salinity of [...] Read more.
This research investigates the effects of freezing temperature and salinity on the adhesion shear strength of amphibious aircraft tires under static icing. It found that the lower the freezing temperature, the greater the ice adhesion shear strength, and the higher the salinity of the water sample, the lower the ice adhesion shear strength. This is related to the thickness of the brine layer at the ice-tire substrate interface; the temperature decreased, the brine layer became thinner, and, accordingly, the adhesion shear strength increased. This paper analyzes the problem of brine precipitation during seawater freezing and its influencing mechanism on the ice adhesion shear strength. In addition, it also found that the lower the temperature, the greater the growth rate of the ice adhesion shear strength. When the salinity in different ranges changed, its influence on the adhesion shear strength was different. When the salinity of the water sample is close to 0%, a small change in the salinity will cause a large change in the ice adhesion shear strength. When the salinity is large, the change of salinity has a weaker influence on the ice adhesion shear strength. This research provides a strong reference for the design and study of amphibious aircraft tires. Full article
(This article belongs to the Section Aeronautics)
Show Figures

Figure 1

12 pages, 5252 KiB  
Article
The Impact of Sensor Errors on Flight Stability
by Michal Welcer, Cezary Szczepański and Mariusz Krawczyk
Aerospace 2022, 9(3), 169; https://doi.org/10.3390/aerospace9030169 - 19 Mar 2022
Cited by 9 | Viewed by 2395
Abstract
Sensors play a significant role in flight control systems. The accuracy of the measurements of state variables affects the quality and effectiveness of flight stabilization. When designing closed-loop systems, it is desirable to use sensors of the highest class and reliability, the signals [...] Read more.
Sensors play a significant role in flight control systems. The accuracy of the measurements of state variables affects the quality and effectiveness of flight stabilization. When designing closed-loop systems, it is desirable to use sensors of the highest class and reliability, the signals of which will be as error-free as possible. False indications lead to malfunctioning of the stabilization system, and its operation does not meet the requirements set for it. There are many types of errors—bias, white noise, hysteresis, or bias drift—which affect the measurement signals from the sensors. One of the significant problems is assessing what maximum level of sensor errors stabilization system will still operate as required. In this paper, the impact of different sensor errors on flight stabilization was presented. The research was carried out using the example of an automatic flight stabilization system using aircraft trimming surfaces in a longitudinal control channel in Hardware-in-the-Loop simulations. The model simulates various types of sensor errors during flight, while the stabilization system is implemented in hardware interfaced with a real-time computer. The results of the simulations are presented and analyzed. Their comparison indicated which sensor errors affects the flight stability the most and how the effectiveness of the stabilization system changes as error increases. The presented results show changes in flight parameters due to added sensor errors. Depending on the accuracy class of the IMU, the errors more or less disrupt the operation of the system. Full article
Show Figures

Figure 1

18 pages, 19157 KiB  
Article
Modular Clustering of UAV Launch System Architecture Based on HDDSM
by Lu Gan, Xingbo Fang, Zhao Zhang, Hu Chen and Xiaohui Wei
Aerospace 2022, 9(3), 168; https://doi.org/10.3390/aerospace9030168 - 18 Mar 2022
Cited by 4 | Viewed by 2518
Abstract
Rapid launch is one of the key indicators of UAV swarm operations, and one of the key decisions that determines the ultimate success of launch system development is the choice of its product architecture. The high-definition design structure matrix (HDDSM) method is introduced [...] Read more.
Rapid launch is one of the key indicators of UAV swarm operations, and one of the key decisions that determines the ultimate success of launch system development is the choice of its product architecture. The high-definition design structure matrix (HDDSM) method is introduced to model the product architecture of a UAV launch system, which reduces the workload of creating binary DSMs and improves the repeatability of product architecture design matrix (PADSM) creation. On this basis, this paper presents the classification of row (column) elements based on PADSM to correct the clustering objective function, and introduces the network structure clustering algorithm (SCAN). Combined with matrix block processing, a better UAV launch system architecture modular configuration scheme is obtained. Full article
(This article belongs to the Section Aeronautics)
Show Figures

Figure 1

27 pages, 11111 KiB  
Article
Approach for Cost Functions for the Use in Trade-Off Investigations Assessing the Environmental Impact of a Future Energy Efficient European Aviation
by Peter Förster, Bekir Yildiz, Thomas Feuerle and Peter Hecker
Aerospace 2022, 9(3), 167; https://doi.org/10.3390/aerospace9030167 - 18 Mar 2022
Cited by 4 | Viewed by 2549
Abstract
Aircraft emissions represent a relevant amount of human induced CO2. Globally, up to 2.5 per cent of such emissions stem from the aviation industry. In order to investigate the effects within the atmosphere, realistic flight profiles are necessary to provide quantitatively [...] Read more.
Aircraft emissions represent a relevant amount of human induced CO2. Globally, up to 2.5 per cent of such emissions stem from the aviation industry. In order to investigate the effects within the atmosphere, realistic flight profiles are necessary to provide quantitatively tangible values of emissions. The flight profiles and the according fuel consumption can be calculated by using waypoints from flight plans and Base of Aircraft Data (BADA). This paper presents an approach to refine the fuel consumption by integrating the passenger load into the calculation. Since effects of emissions have to be assessed on a greater scale, such as on the European air traffic network, the presented approach provides cost functions for CO2 emissions for different aircraft types and load factors. The cost functions were derived by means of regression analyses of BADA based calculated flight profiles with a step size of one second. The calculations are based on real historic traffic scenarios over several days. The derived aircraft specific fuel burn coefficients enable a simple and efficient integration of CO2 estimations depending on the flight distance, load factor and aircraft type. This can be applied to large traffic scenarios to also study different set-ups such as travel restrictions, other disruptions or an alteration in the traffic system as a whole. In order to enable the assessment of further aspects of such changes to the European air traffic system at large and to foster reproducibility and comparability of related studies, we provide further general-purpose cost estimation functions for several important key characteristics. Besides fuel consumption, we develop cost estimations for air navigation fees and maintenance for conventional aircraft. Those functions are also provided for the design concept of a short-range all-electric aircraft. This propeller aircraft features game-changing technologies such as active laminar flow control, active load alleviation and advanced materials and structure concepts. The approaches discussed in this paper will focus on the generic aspects of aircraft related costs, which can be derived from general available data. For the sake of reproducibility, the results will be made publicly available. Full article
(This article belongs to the Special Issue Aircraft Emissions and Climate Impact)
Show Figures

Figure 1

16 pages, 3790 KiB  
Article
Observability Analysis and Improvement Approach for Cooperative Optical Orbit Determination
by Yan Luo, Tong Qin and Xingyu Zhou
Aerospace 2022, 9(3), 166; https://doi.org/10.3390/aerospace9030166 - 18 Mar 2022
Cited by 7 | Viewed by 2185
Abstract
Cooperative orbit determination (OD) using inter-spacecraft optical measurements is an important technology for space constellation missions. In this paper, the observability of a two-spacecraft cooperative OD system is investigated. The influence of geometric configuration on the observability is analyzed, and two special unobservable [...] Read more.
Cooperative orbit determination (OD) using inter-spacecraft optical measurements is an important technology for space constellation missions. In this paper, the observability of a two-spacecraft cooperative OD system is investigated. The influence of geometric configuration on the observability is analyzed, and two special unobservable configurations are identified. Then, an approach to improve the observability by involving an additional spacecraft is proposed. Comparative analysis of system observability shows that an extra spacecraft in the system could change the coplanar and symmetric configuration and improve the observability of the cooperative OD system. Monte-Carlo simulations are carried out, and results verify the observability improvement conclusion. Full article
(This article belongs to the Special Issue Recent Advances in Spacecraft Dynamics and Control)
Show Figures

Figure 1

21 pages, 10035 KiB  
Article
Multi-Objective Design of a Distributed Ducted Fan System
by Jiahao Guo and Zhou Zhou
Aerospace 2022, 9(3), 165; https://doi.org/10.3390/aerospace9030165 - 17 Mar 2022
Cited by 4 | Viewed by 2349
Abstract
The distributed propulsion system applied to the vertical take-off and landing aircraft must maintain the high performance in both hover and cruise flight. The gap of the power unit has an adverse effect on the distributed ducted fan system, especially in cruise flight. [...] Read more.
The distributed propulsion system applied to the vertical take-off and landing aircraft must maintain the high performance in both hover and cruise flight. The gap of the power unit has an adverse effect on the distributed ducted fan system, especially in cruise flight. Therefore, a new distributed ducted fan system was proposed, which eliminated the power gap in design, and adjusted the contraction and expansion of the wake through the deflectable induced wing arranged behind the ducted fan to ensure the high efficiency of the distributed ducted fan system in different flight phases. Then, a multi-objective design method of the distributed ducted fan system was proposed, and the feasibility of the design method was verified by designing the inlet and outlet of the duct and the induced wing. Design results show that the performance change of the distributed ducted fan system mainly came from the change of the inlet. By increasing the length and height of the inlet, the flow separation was alleviated and the duct thrust was increased in hove flight, but the cruise drag became larger. The increase of the inlet height made the operating point of the blade far away in hover and cruise flight, which increased the difficulty of the multi-objective design. Compared with the distributed ducted fan system composed of the traditional circular ducted fan, the hovering power load was reduced by 3.703%, but the cruise efficiency was increased by 17.372%, and the spanwise space was reduced by 20% in the final design. Full article
(This article belongs to the Section Aeronautics)
Show Figures

Figure 1

19 pages, 1202 KiB  
Article
A Machine Learning Approach for Global Steering Control Moment Gyroscope Clusters
by Charalampos Papakonstantinou, Ioannis Daramouskas, Vaios Lappas, Vassilis C. Moulianitis and Vassilis Kostopoulos
Aerospace 2022, 9(3), 164; https://doi.org/10.3390/aerospace9030164 - 17 Mar 2022
Cited by 4 | Viewed by 1990
Abstract
This paper addresses the problem of singularity avoidance for a 4-Control Moment Gyroscope (CMG) pyramid cluster, as used for the attitude control of a satellite using machine learning (ML) techniques. A data-set, generated using a heuristic algorithm, relates the initial gimbal configuration and [...] Read more.
This paper addresses the problem of singularity avoidance for a 4-Control Moment Gyroscope (CMG) pyramid cluster, as used for the attitude control of a satellite using machine learning (ML) techniques. A data-set, generated using a heuristic algorithm, relates the initial gimbal configuration and the desired maneuver—inputs—to a number of null space motions the gimbals have to execute—output. Two ML techniques—Deep Neural Network (DNN) and Random Forest Classifier (RFC)—are utilized to predict the required null motion for trajectories that are not included in the training set. The principal advantage of this approach is the exploitation of global information gathered from the whole maneuver compared to conventional steering laws that consider only some local information, near the current gimbal configuration for optimization and are prone to local extrema. The data-set generation and the predictions of the ML systems can be made offline, so no further calculations are needed on board, providing the possibility to inspect the way the system responds to any commanded maneuver before its execution. The RFC technique demonstrates enhanced accuracy for the test data compared to the DNN, validating that it is possible to correctly predict the null motion even for maneuvers that are not included in the training data. Full article
Show Figures

Figure 1

19 pages, 3611 KiB  
Article
Constrained Motion Planning of 7-DOF Space Manipulator via Deep Reinforcement Learning Combined with Artificial Potential Field
by Yinkang Li, Danyi Li, Wenshan Zhu, Jun Sun, Xiaolong Zhang and Shuang Li
Aerospace 2022, 9(3), 163; https://doi.org/10.3390/aerospace9030163 - 17 Mar 2022
Cited by 18 | Viewed by 5585
Abstract
During the on-orbit operation task of the space manipulator, some specific scenarios require strict constraints on both the position and orientation of the end-effector, such as refueling and auxiliary docking. To this end, a novel motion planning approach for a space manipulator is [...] Read more.
During the on-orbit operation task of the space manipulator, some specific scenarios require strict constraints on both the position and orientation of the end-effector, such as refueling and auxiliary docking. To this end, a novel motion planning approach for a space manipulator is proposed in this paper. Firstly, a kinematic model of the 7-DOF free-floating space manipulator is established by introducing the generalized Jacobian matrix. On this basis, a planning approach is proposed to realize the motion planning of the 7-DOF free-floating space manipulator. Considering that the on-orbit environment is dynamical, the robustness of the motion planning approach is required, thus the deep reinforcement learning algorithm is introduced to design the motion planning approach. Meanwhile, the deep reinforcement learning algorithm is combined with artificial potential field to improve the convergence. Besides, the self-collision avoidance constraint is considered during planning to ensure the operational security. Finally, comparative simulations are conducted to demonstrate the performance of the proposed planning method. Full article
(This article belongs to the Special Issue Recent Advances in Spacecraft Dynamics and Control)
Show Figures

Figure 1

14 pages, 4226 KiB  
Article
Numerical Study on the Non-Oscillatory Unstarted Flow in a Scramjet Inlet-Isolator Model
by Jaewon Lee, Sang Gon Lee, Sang Hun Kang and Hyuck-Joon Namkoung
Aerospace 2022, 9(3), 162; https://doi.org/10.3390/aerospace9030162 - 17 Mar 2022
Cited by 1 | Viewed by 2667
Abstract
For successful scramjet engine operations, it is important to understand the mechanism of the inlet unstart phenomenon. Among various unstarted flow patterns in hypersonic inlets, the mechanism of low-amplitude oscillatory unstarted flow is still unclear. Therefore, in the present study, the flow characteristics [...] Read more.
For successful scramjet engine operations, it is important to understand the mechanism of the inlet unstart phenomenon. Among various unstarted flow patterns in hypersonic inlets, the mechanism of low-amplitude oscillatory unstarted flow is still unclear. Therefore, in the present study, the flow characteristics of non-oscillatory unstarted flow in a scramjet inlet-isolator model are studied by using numerical analysis with the RANS-based OpenFOAM solver. In the numerical results, the amplitude of pressure oscillation and the average pressure near the model outlet are in good agreement with experimental results. In the detailed analysis of the results, it is found that the incoming flow within the boundary layers repeatedly changes direction due to the flow blockage at the end of the model. In these direction-changing processes, recirculation zones near the walls irregularly influence the choked flow zones at the rear part of the model. These irregular behaviors result in non-oscillatory unstarted flow. Additionally, the main differences between the high-amplitude oscillatory unstarted flow and non-oscillatory unstarted flow are addressed. Full article
Show Figures

Figure 1

21 pages, 28466 KiB  
Article
Effect of Progressive Integration of On-Board Systems Design Discipline in an MDA Framework for Aircraft Design with Different Level of Systems Electrification
by Marco Fioriti, Pierluigi Della Vecchia and Giuseppa Donelli
Aerospace 2022, 9(3), 161; https://doi.org/10.3390/aerospace9030161 - 15 Mar 2022
Cited by 2 | Viewed by 2279
Abstract
The on-board design discipline is sometimes ignored during the first aircraft design iterations. It might be understandable when a single on-board system architecture is considered, especially when a conventional architecture is selected. However, seeing the trend towards systems electrification, multiple architectures can be [...] Read more.
The on-board design discipline is sometimes ignored during the first aircraft design iterations. It might be understandable when a single on-board system architecture is considered, especially when a conventional architecture is selected. However, seeing the trend towards systems electrification, multiple architectures can be defined and each one should be evaluated during the first tradeoff studies. In this way, the systems design discipline should be integrated from the first design iterations. This paper deals with a progressive integration of the discipline to examine the partial or total effect of the systems design inside an MDA workflow. The study is carried out from a systems design perspective, analyzing the effect of electrification on aircraft design, with different MDA workflow arrangements. Starting from a non-iterative systems design, other disciplines such as aircraft performance, engine design, and aircraft synthesis are gradually added, increasing the sensibility of the aircraft design to the different systems architectures. The results show an error of 40% in on-board systems assessment when the discipline is not fully integrated. Finally, using the workflow which allows for greater integration, interesting differences can be noted when comparing systems with different levels of electrification. A possible mass saving of 2.6% of aircraft MTOM can be reached by properly selecting the systems technologies used. Full article
(This article belongs to the Special Issue Turboprop Aircraft Design and Optimization)
Show Figures

Figure 1

27 pages, 7651 KiB  
Article
A Multidisciplinary Possibilistic Approach to Size the Empennage of Multi-Engine Propeller-Driven Light Aircraft
by Mohsen Rostami, Julian Bardin, Daniel Neufeld and Joon Chung
Aerospace 2022, 9(3), 160; https://doi.org/10.3390/aerospace9030160 - 15 Mar 2022
Cited by 3 | Viewed by 2892
Abstract
In considering aircraft design, it is very important to effectively size the tail configuration for stability and control. Multidisciplinary design optimization (MDO) focuses on the use of numerical optimization in the design of systems with multiple subsystems or disciplines of consideration. However, MDO [...] Read more.
In considering aircraft design, it is very important to effectively size the tail configuration for stability and control. Multidisciplinary design optimization (MDO) focuses on the use of numerical optimization in the design of systems with multiple subsystems or disciplines of consideration. However, MDO uses deterministic calculations, and does not consider the uncertainties that arise from the employed analyses, including errors due to linearization and simplification. For problems with inadequate input data, the possibility-based design optimization (PBDO) scheme can be implemented in its stead to achieve reliable designs using membership functions for epistemic uncertainties. A multidisciplinary, possibilistic approach is presented to define the sizing of the empennage configuration of a twin-engine propeller-driven aircraft by changing shape parameters while satisfying the design requirements given the tailless aircraft configuration, the flight conditions, and various uncertainties. The corresponding disciplines are aerodynamics, stability and control, propulsion and weight and balance. Herein, different design requirements are considered including longitudinal/lateral/directional trim and stability characteristics, manufacturing and controllability criteria, handling qualities, operational requirements, airworthiness and survivability. The resulting aerodynamic characteristics and flight dynamic stability outcomes show that the optimized tail configuration for the proposed aircraft fully complied with airworthiness requirements and predefined constraints while considering several uncertainties due to the use of early-stage statistical estimations. The proposed approach can be used to enhance the preliminary design of multi-engine propeller-driven light aircraft where only low-fidelity, statistical estimations are available. The resulting output is not only an optimized aircraft configuration, but one where the stability of the design has been ensured. In this work, the aerodynamic characteristics have been determined using a validated semi-empirical program called MAPLA, developed for light aircraft designs and development in the preliminary design phase. Furthermore, the optimization framework consists of a deterministic optimizer that runs sequentially with a possibility assessment algorithm. Full article
(This article belongs to the Section Aeronautics)
Show Figures

Figure 1

19 pages, 3281 KiB  
Article
Direct-Adaptive Nonlinear MPC for Spacecraft Near Asteroids
by Madhur Tiwari, Eric Coyle and Richard J. Prazenica
Aerospace 2022, 9(3), 159; https://doi.org/10.3390/aerospace9030159 - 15 Mar 2022
Cited by 1 | Viewed by 1918
Abstract
In this work, we propose a novel controller based on a simple adaptive controller methodology and model predictive control (MPC) to generate and track trajectories of a spacecraft in the vicinity of asteroids. The control formulation is based on using adaptive control as [...] Read more.
In this work, we propose a novel controller based on a simple adaptive controller methodology and model predictive control (MPC) to generate and track trajectories of a spacecraft in the vicinity of asteroids. The control formulation is based on using adaptive control as a feedback controller and MPC as a feed-forward controller. The spacecraft system model, asteroid shape and inertia are assumed to be unknown, with the exception of the estimated total mass and angular velocity of the asteroid. The MPC is used to generate feed-forward trajectories and control input using only the mass and angular velocity of the asteroid combined with obstacle avoidance constraints. However, since the control input from MPC is calculated using only an approximated model of the asteroid, it fails to control the spacecraft in the presence of disturbances due to the asteroid’s irregular gravitational field. Hence, we propose an adaptive controller in conjunction with MPC to handle unknown disturbances. The numerical results presented in this work show that the novel control system is able to handle unknown disturbances while generating and tracking sub-optimal trajectories better than adaptive control or MPC solely. Full article
(This article belongs to the Section Astronautics & Space Science)
Show Figures

Figure 1

20 pages, 16222 KiB  
Article
Experimental and Numerical Study on Residual Strength of Honeycomb Sandwich Composite Structure after Lightning Strike
by Yongwei Wang, Deng Zhou, Gang Yan and Zhuangjie Wang
Aerospace 2022, 9(3), 158; https://doi.org/10.3390/aerospace9030158 - 14 Mar 2022
Cited by 2 | Viewed by 2292
Abstract
Honeycomb sandwich composite structures are widely used in various aircraft structures due to their unique performance. However, honeycomb sandwich composite structures are prone to lightning damage that threatens the structure safety. Therefore, it is necessary to assess the residual mechanical properties of honeycomb [...] Read more.
Honeycomb sandwich composite structures are widely used in various aircraft structures due to their unique performance. However, honeycomb sandwich composite structures are prone to lightning damage that threatens the structure safety. Therefore, it is necessary to assess the residual mechanical properties of honeycomb sandwich composite structures after a lightning strike. In this study, simulated lightning strike tests were first conducted for honeycomb sandwich panels with and without carbon nanotube film (CNTF) to obtain different damage scenarios and study the protection effect of CNTF. Then, the residual compressive strength of the panels with lightning strike damage was predicted using a progressive damage analysis method and verified with the experimental results. It was found that the numerical prediction results agree with the experimental results. The size and extent of lightning damage have an important effect on the compression damage mode of honeycomb sandwich panel with closed edges. Full article
(This article belongs to the Topic Composites in Aerospace and Mechanical Engineering)
Show Figures

Figure 1

16 pages, 22713 KiB  
Article
Finite-Time Distributed Leaderless Cooperative Guidance Law for Maneuvering Targets under Directed Topology without Numerical Singularities
by Xiaofei Dong and Zhang Ren
Aerospace 2022, 9(3), 157; https://doi.org/10.3390/aerospace9030157 - 13 Mar 2022
Cited by 3 | Viewed by 1967
Abstract
A new distributed leaderless cooperative guidance algorithm is suggested for multi-directional saturation strikes against maneuvering targets. First, the finite-time disturbance observer (FDO) is used to estimate the target’s unknown maneuvers. After that, the guidance laws along the line-of-sight (LOS) direction and the LOS [...] Read more.
A new distributed leaderless cooperative guidance algorithm is suggested for multi-directional saturation strikes against maneuvering targets. First, the finite-time disturbance observer (FDO) is used to estimate the target’s unknown maneuvers. After that, the guidance laws along the line-of-sight (LOS) direction and the LOS normal direction are designed separately based on the finite-time consensus theory. The proposed guidance law could satisfy both impact time and LOS angle constraints. Numerical singularities due to feedback linearization are avoided by nonlinear stability analysis. Finally, the effectiveness of the proposed cooperative guidance law is proved by numerical simulation arithmetic. Full article
(This article belongs to the Special Issue Recent Advances in Spacecraft Dynamics and Control)
Show Figures

Figure 1

18 pages, 5640 KiB  
Article
Separation Reliability Analysis for the Low-Shock Separation Nut with Mechanism Motion Failure Mode
by Lei Niu, Hongmao Tu, Haiping Dong and Nan Yan
Aerospace 2022, 9(3), 156; https://doi.org/10.3390/aerospace9030156 - 12 Mar 2022
Cited by 2 | Viewed by 2707
Abstract
A functional reliability simulation method based on the Kriging model is proposed to efficiently evaluate the functional reliability of low-shock separation nuts. First, a deterministic separation function simulation model of the separation nut is established. Second, the working load, geometric dimensions and propellant [...] Read more.
A functional reliability simulation method based on the Kriging model is proposed to efficiently evaluate the functional reliability of low-shock separation nuts. First, a deterministic separation function simulation model of the separation nut is established. Second, the working load, geometric dimensions and propellant combustion parameters are introduced to establish the nonlinear implicit function of the separation nut in different separation stages, and the Kriging model is used to display the function. Finally, the functional reliability simulation workflow of the separation nut is established, and reliability and sensitivity analyses are performed to quantify the importance ranking of the working load, geometric size and propellant combustion parameters. It is shown that the influence of the uncertainties can be precisely described, and the preload and the support angle between the piston and nut flap play a dominant role in the separation reliability. This can further support the detailed design of the separation nut. Full article
Show Figures

Figure 1

18 pages, 701 KiB  
Article
Conversion Flight Control for Tiltrotor Aircraft via Active Disturbance Rejection Control
by Ke Lu, Hongyuan Tian, Pan Zhen, Senkui Lu and Renliang Chen
Aerospace 2022, 9(3), 155; https://doi.org/10.3390/aerospace9030155 - 12 Mar 2022
Cited by 6 | Viewed by 2851
Abstract
The tiltrotor aircraft consists of three primary flight modes, which are helicopter flight mode in low forward speed flight, airplane flight mode in high forward speed flight and conversion flight mode. This paper presents an active disturbance rejection controller for tiltrotor aircraft conversion [...] Read more.
The tiltrotor aircraft consists of three primary flight modes, which are helicopter flight mode in low forward speed flight, airplane flight mode in high forward speed flight and conversion flight mode. This paper presents an active disturbance rejection controller for tiltrotor aircraft conversion flight. First, a tiltrotor aircraft flight dynamics model is developed and verified. Then, conversion flight control laws, designed via the active disturbance rejection control (ADRC) and sliding mode control (SMC) techniques, are proposed for the tiltrotor aircraft with model uncertainties and external disturbance, which are estimated with an extended state observer. Finally, the simulation of automatic conversion flight is carried out, which shows the effectiveness of the developed controller. Full article
(This article belongs to the Special Issue Aerospace Guidance, Navigation and Control)
Show Figures

Figure 1

15 pages, 3886 KiB  
Article
Digital Twin-Driven Reconfigurable Fixturing Optimization for Trimming Operation of Aircraft Skins
by Fuwen Hu
Aerospace 2022, 9(3), 154; https://doi.org/10.3390/aerospace9030154 - 09 Mar 2022
Cited by 11 | Viewed by 2754
Abstract
The incomplete constraint induced by multipoint reconfigurable fixturing and the inherently weak rigidity of thin shell parts significantly hinder the stability of flexible fixturing systems. In particular, during the trimming operation, the number of effective locators may change with the progressive separation of [...] Read more.
The incomplete constraint induced by multipoint reconfigurable fixturing and the inherently weak rigidity of thin shell parts significantly hinder the stability of flexible fixturing systems. In particular, during the trimming operation, the number of effective locators may change with the progressive separation of the desired shape from that of the blank part, which easily produces the cliff effect (instantaneous dramatic reduction) of the system stiffness. As a result, the location layout becomes a main crux in reality. Regarding this issue, the author herein presents a digital twin-based decision-making methodology to generate reconfigurable fixturing schemes through integrating virtual and physical information. Considering the intrinsic features of the trimming process, such as the time-varying propagation of the system stiffness and the coupling effects of multiattribute process parameters, the hidden Markov model was introduced to cope with reconfigurable fixturing optimization. To achieve fast convergence and seek a feasible solution, local information (where low system rigidity occurs) was extracted and shared to guide the optimization process in a front-running simulation. To demonstrate the presented method, trimming experiments were performed on a large-size compliant workpiece held by a reconfigurable fixturing system that was developed independently by our research group. The experimental results indicate that the proposed method could adaptively iterate out the optimal locating schema and process control reference from the virtual fixturing and trimming simulation to guarantee the time-varying stability of the trimming process in the real world. Clearly, the digital twin-based reconfigurable fixturing planning approach generated a high possibility of building a context-specific, closed-loop decision-making paradigm and allowing the reconfigurable fixturing system to behave in a more adaptable and flexible manner. Full article
(This article belongs to the Section Aeronautics)
Show Figures

Figure 1

23 pages, 16926 KiB  
Article
Aircraft Propeller Design through Constrained Aero-Structural Particle Swarm Optimization
by José D. Hoyos, Jesús H. Jiménez, Camilo Echavarría, Juan P. Alvarado and Germán Urrea
Aerospace 2022, 9(3), 153; https://doi.org/10.3390/aerospace9030153 - 09 Mar 2022
Cited by 7 | Viewed by 5057
Abstract
An aero-structural algorithm to reduce the energy consumption of a propeller-driven aircraft is developed through a propeller design method coupled with a Particle Swarm Optimization (PSO). A wide range of propeller parameters is considered in the optimization, including the geometry of the airfoil [...] Read more.
An aero-structural algorithm to reduce the energy consumption of a propeller-driven aircraft is developed through a propeller design method coupled with a Particle Swarm Optimization (PSO). A wide range of propeller parameters is considered in the optimization, including the geometry of the airfoil at each propeller section. The propeller performance prediction tool employs a convergence improved Blade Element Momentum Theory fed by airfoil aerodynamic characteristics obtained from XFOIL and a validated OpenFOAM. A stall angle correction is estimated from experimental NACA 4-digits data and employed where convergence issues emerge. The aerodynamic data are corrected to account for compressibility, three-dimensional, viscous, and Reynolds number effects. The coefficients for the rotational corrections are proposed from experimental data fitting. A structural model based on Euler-Bernoulli beam theory is employed and validated against Finite Element Analysis, while the impact of centrifugal forces is discussed. A case of study is carried out where the chord and pitch distributions are compared to minimal losses distribution from vortex theory. Wind tunnel tests were performed with printed propellers to conclude the feasibility of the entire routine and the differences between XFOIL and CFD optimal propellers. Finally, the optimal CFD propeller is compared against a commercial propeller with the same diameter, pitch, and operational conditions, showing higher thrust and efficiency. Full article
(This article belongs to the Section Aeronautics)
Show Figures

Figure 1

16 pages, 5931 KiB  
Article
Hover Performance Analyses of Coaxial Co-Rotating Rotors for eVTOL Aircraft
by Yu-Been Lee and Jae-Sang Park
Aerospace 2022, 9(3), 152; https://doi.org/10.3390/aerospace9030152 - 09 Mar 2022
Cited by 3 | Viewed by 3598
Abstract
Hover performance analyses of coaxial co-rotating rotors (or stacked rotors), which can be used as lifting rotors for electric VTOL (eVTOL) aircraft, are conducted here. In this study, the rotorcraft comprehensive analysis code, CAMRAD II, is used with the general free-wake model. The [...] Read more.
Hover performance analyses of coaxial co-rotating rotors (or stacked rotors), which can be used as lifting rotors for electric VTOL (eVTOL) aircraft, are conducted here. In this study, the rotorcraft comprehensive analysis code, CAMRAD II, is used with the general free-wake model. The generic coaxial co-rotating rotor without the blade taper and built-in twist is considered as the baseline rotor model, and the rotor is trimmed to match a prescribed rotor thrust value. The hover performance, including the rotor power and Figure of Merit (FM), is investigated for various index angles, axial spacings, blade taper ratios, and built-in twist angles. A maximum FM value is obtained near an index angle of 0° and 10° when the axial spacing is below and above 5.27%R, respectively. When the index angle is 0° and axial spacing is 1.44% R, the maximum increments in the FM are 3.03% and 6.06%, respectively, for a rotor with a blade taper ratio of 0.8 and a built-in twist angle of −12°. Therefore, this simulation study demonstrates that the hover performance of coaxial co-rotating rotors can be changed by adjusting the index angle or the axial spacing. Full article
(This article belongs to the Section Aeronautics)
Show Figures

Figure 1

14 pages, 4757 KiB  
Article
Bifurcations of Periodic Orbits in the Gravitational Field of Irregular Bodies: Applications to Bennu and Steins
by Yongjie Liu, Yu Jiang and Hengnian Li
Aerospace 2022, 9(3), 151; https://doi.org/10.3390/aerospace9030151 - 08 Mar 2022
Cited by 2 | Viewed by 1909
Abstract
We investigate the topological types and bifurcations of periodic orbits in the gravitational field of irregular bodies by the well-known two parameter analysis method. Results show that the topological types of periodic orbits are determined by the locations of these two parameters and [...] Read more.
We investigate the topological types and bifurcations of periodic orbits in the gravitational field of irregular bodies by the well-known two parameter analysis method. Results show that the topological types of periodic orbits are determined by the locations of these two parameters and that the bifurcation types correspond to their variation paths in the plane. Several new paths corresponding to doubling period bifurcations, tangent bifurcations and Neimark–Sacker bifurcations are discovered. Then, applications in detecting bifurcations of periodic orbits near asteroids 101955 Bennu and 2867 Steins are presented. It is found that tangent bifurcations may occur three times when continuing the vertical orbits near the equilibrium points of 101955 Bennu. The continuation stops as the Jacobi energy reaches a local maximum. However, while continuing the vertical orbits near the equilibrium points of 2867 Steins, the tangent bifurcation and pseudo period-doubling bifurcation occur. The continuation can always go on, and the orbit ultimately becomes nearly circular. Full article
(This article belongs to the Special Issue Recent Advances in Spacecraft Dynamics and Control)
Show Figures

Figure 1

26 pages, 1098 KiB  
Article
Adaptive Initial Sizing Method and Safety Assessment for Hybrid-Electric Regional Aircraft
by Nicolas Moebs, Dominik Eisenhut, Evert Windels, Jenny van der Pols and Andreas Strohmayer
Aerospace 2022, 9(3), 150; https://doi.org/10.3390/aerospace9030150 - 08 Mar 2022
Cited by 9 | Viewed by 3449
Abstract
In the wake of many climate-friendly initiatives, the aviation sector must become more sustainable. A potential path for regional airliners could be the installation of hybrid-electric powertrains. In this work, a conceptual study design of various powertrain architectures is conducted. This helps the [...] Read more.
In the wake of many climate-friendly initiatives, the aviation sector must become more sustainable. A potential path for regional airliners could be the installation of hybrid-electric powertrains. In this work, a conceptual study design of various powertrain architectures is conducted. This helps the designer to quickly generate approximate numbers on the basic characteristics of new aircraft configurations. These results can be used to advance subsystems modeling or improve the starting values in the following preliminary aircraft design. After the selection of representative architectures, reasonable technological assumptions were gathered, ranging between a conservative and an optimistic scenario. This was done for powertrain components, various energy storage concepts and structural and aerodynamic changes. The initial sizing method was developed by building two interconnected sizing iteration loops. In addition, a safety assessment was integrated due to the many unconventional components in the powertrain’s setup. The results show that the fuel consumption of a conventional aircraft is not undercut with a hybrid-electric powertrain aircraft based on conservative technological assumptions. In the optimistic scenario, however, selected powertrain architectures show a significant drop in fuel consumption when compared to the conventional one. Furthermore, the use of synergistic effects and systematic powertrain optimizations can decrease the fuel consumption even further. In conclusion, it was shown that this initial sizing method can calculate entire hybrid-electric aircraft designs on a conceptual level. The results can quickly present trends that are reasonable and helpful. In addition, the safety assessment first gives evidence about which levels of safety have to be considered for the different components in the development of hybrid-electric powertrains. Full article
(This article belongs to the Special Issue Advances in Aerospace Sciences and Technology II)
Show Figures

Figure 1

21 pages, 4734 KiB  
Article
Correction-Efficiency-Coefficient-Based Trajectory Optimization for Two-Dimensional Trajectory Correction Projectile
by Dejian Zhang, Jian Zhang, Zhigang Jiao, Qingjie Ni and Qiuping Guo
Aerospace 2022, 9(3), 149; https://doi.org/10.3390/aerospace9030149 - 08 Mar 2022
Cited by 2 | Viewed by 2161
Abstract
Based on the lift-to-drag ratio of a two-dimensional trajectory correction projectile, in this paper, a novel correction efficiency coefficient model has been proposed for the trajectory optimization of a two-dimensional trajectory correction projectile, and research on the influence a correction efficiency coefficient has [...] Read more.
Based on the lift-to-drag ratio of a two-dimensional trajectory correction projectile, in this paper, a novel correction efficiency coefficient model has been proposed for the trajectory optimization of a two-dimensional trajectory correction projectile, and research on the influence a correction efficiency coefficient has on the flight parameters of correction trajectory is carried out. A series of results are obtained through theoretical analysis and simulation calculations, indicating that, the smaller the value of the correction efficiency coefficient is, the stronger the correction ability of the projectile reserves. The trajectory and canard geometry of the correction section of the two-dimensional trajectory correction projectile are optimized by the Gauss pseudo-spectral method and correction efficiency coefficient, and, after taking the correction efficiency coefficient into account, the projectile can accurately hit the target and effectively eliminate the swing phenomenon of the projectile’s lateral trajectory. Meanwhile, a stable roll control command is obtained. When the diameter aspect ratio of the canard is 0.4, both the flight state quantity of the optimized projectile and the roll control command are more stable, and, when the canard shape is trapezoidal, the correction efficiency coefficient is smaller, the result of trajectory optimization is more stable, and the stability of the output roll control command is better. The research results of this paper can provide certain references for both the designs of the two-dimensional trajectory correction projectile’s trajectory and the canard geometry. Full article
Show Figures

Figure 1

27 pages, 11385 KiB  
Article
An Efficient Sampling-Based Path Planning for the Lunar Rover with Autonomous Target Seeking
by Gang Chen, Hong You, Zeyuan Huang, Junting Fei, Yifan Wang and Chuankai Liu
Aerospace 2022, 9(3), 148; https://doi.org/10.3390/aerospace9030148 - 08 Mar 2022
Cited by 6 | Viewed by 2614
Abstract
This paper presents an efficient path planning method for the lunar rover to improve the autonomy and exploration ability in the complex and unstructured lunar surface environment. Firstly, the safe zone for the rover’s motion is defined, based on which a detecting point [...] Read more.
This paper presents an efficient path planning method for the lunar rover to improve the autonomy and exploration ability in the complex and unstructured lunar surface environment. Firstly, the safe zone for the rover’s motion is defined, based on which a detecting point selection strategy is proposed to choose target positions that meet the rover’s constraints. Secondly, an improved sampling-based path planning method is proposed to get a safe path for the rover efficiently. Thirdly, a map extension strategy for the unstructured and continually varying environment is included to update the roadmap, which takes advantage of the historical planning information. Finally, the proposed method is tested in a complex lunar surface environment. Numerical results show that the appropriate detecting positions can be selected autonomously, while a safe path to the selected detecting position can be obtained with high efficiency and quality compared with the Probabilistic Roadmap (PRM) and A* search algorithm. Full article
Show Figures

Figure 1

34 pages, 4708 KiB  
Article
Application of Probabilistic Set-Based Design Exploration on the Energy Management of a Hybrid-Electric Aircraft
by Andrea Spinelli, Hossein Balaghi Enalou, Bahareh Zaghari, Timoleon Kipouros and Panagiotis Laskaridis
Aerospace 2022, 9(3), 147; https://doi.org/10.3390/aerospace9030147 - 08 Mar 2022
Cited by 11 | Viewed by 3861
Abstract
The energy management strategy of a hybrid-electric aircraft is coupled with the design of the propulsion system itself. A new design space exploration methodology based on Set-Based Design is introduced to analyse the effects of different strategies on the fuel consumption, NOx [...] Read more.
The energy management strategy of a hybrid-electric aircraft is coupled with the design of the propulsion system itself. A new design space exploration methodology based on Set-Based Design is introduced to analyse the effects of different strategies on the fuel consumption, NOx and take-off mass. Probabilities are used to evaluate and discard areas of the design space not capable of satisfying the constraints and requirements, saving computational time corresponding to an average of 75%. The study is carried on a 50-seater regional turboprop with a parallel hybrid-electric architecture. The strategies are modelled as piecewise linear functions of the degree of hybridisation and are applied to different mission phases to explore how the strategy complexity and the number of hybridised segments can influence the behaviour of the system. The results indicate that the complexity of the parametrisation does not affect the trade-off between fuel consumption and NOx emissions. On the contrary, a significant trade-off is identified on which phases are hybridised. That is, the least fuel consumption is obtained only by hybridising the longest mission phase, while less NOx emissions are generated if more phases are hybridised. Finally, the maximum take-off mass was investigated as a parameter, and the impact to the trade-off between the objectives was analysed. Three energy management strategies were suggested from these findings, which achieved a reduction to the fuel consumption of up to 10% and a reduction to NOx emissions of up to 15%. Full article
Show Figures

Figure 1

32 pages, 1166 KiB  
Review
A Comprehensive Survey on Climate Optimal Aircraft Trajectory Planning
by Abolfazl Simorgh, Manuel Soler, Daniel González-Arribas, Sigrun Matthes, Volker Grewe, Simone Dietmüller, Sabine Baumann, Hiroshi Yamashita, Feijia Yin, Federica Castino, Florian Linke, Benjamin Lührs and Maximilian Mendiguchia Meuser
Aerospace 2022, 9(3), 146; https://doi.org/10.3390/aerospace9030146 - 07 Mar 2022
Cited by 19 | Viewed by 4543
Abstract
The strong growth rate of the aviation industry in recent years has created significant challenges in terms of environmental impact. Air traffic contributes to climate change through the emission of carbon dioxide (CO2) and other non-CO2 effects, and the associated [...] Read more.
The strong growth rate of the aviation industry in recent years has created significant challenges in terms of environmental impact. Air traffic contributes to climate change through the emission of carbon dioxide (CO2) and other non-CO2 effects, and the associated climate impact is expected to soar further. The mitigation of CO2 contributions to the net climate impact can be achieved using novel propulsion, jet fuels, and continuous improvements of aircraft efficiency, whose solutions lack in immediacy. On the other hand, the climate impact associated with non-CO2 emissions, being responsible for two-thirds of aviation radiative forcing, varies highly with geographic location, altitude, and time of the emission. Consequently, these effects can be reduced by planning proper climate-aware trajectories. To investigate these possibilities, this paper presents a survey on operational strategies proposed in the literature to mitigate aviation’s climate impact. These approaches are classified based on their methodology, climate metrics, reliability, and applicability. Drawing upon this analysis, future lines of research on this topic are delineated. Full article
Show Figures

Figure 1

21 pages, 6697 KiB  
Article
Improvement of Airport Surface Operation at Tokyo International Airport Using Optimization Approach
by Tong Chen and Shinya Hanaoka
Aerospace 2022, 9(3), 145; https://doi.org/10.3390/aerospace9030145 - 07 Mar 2022
Cited by 5 | Viewed by 3663
Abstract
Congestion and delays occur on airport surfaces as a result of a rapid increase in the demand for air transport. The aim of this study is to determine the differences between optimized and observed operations to improve airport surface operation at Tokyo International [...] Read more.
Congestion and delays occur on airport surfaces as a result of a rapid increase in the demand for air transport. The aim of this study is to determine the differences between optimized and observed operations to improve airport surface operation at Tokyo International Airport by using mixed-integer linear programming to minimize the total ground movement distance and time based on real-time flight information. Receding horizon schemes are considered to adapt to dynamic environments. The model obtains results that reduce the taxi distance by 18.54% and taxi time by 29.77% compared with the observed data. A comparison of taxiway usage patterns between the optimization results and observed data provides insight into the optimization process, for example, changes in runway cross strategies and taxiway direction rules. Factors such as the objective function weights and airline–terminal relationship were found to significantly affect the optimization result. This study suggests improvements that can be made at airports to achieve a more efficient surface operation. Full article
(This article belongs to the Collection Air Transportation—Operations and Management)
Show Figures

Figure 1

18 pages, 4714 KiB  
Article
In-Flight Demonstration of Stall Improvement Using a Plasma Actuator for a Small Unmanned Aerial Vehicle
by Satoshi Sekimoto, Hiroki Kato, Kozo Fujii and Hiroshi Yoneda
Aerospace 2022, 9(3), 144; https://doi.org/10.3390/aerospace9030144 - 07 Mar 2022
Cited by 9 | Viewed by 2491
Abstract
The flow control capability (especially for separation control) of a dielectric-barrier-discharge plasma actuator (DBD-PA) has been investigated extensively. However, these studies have been conducted under ideal conditions, such as wind tunnels and computational environments, and limited studies have investigated the effects of plasma [...] Read more.
The flow control capability (especially for separation control) of a dielectric-barrier-discharge plasma actuator (DBD-PA) has been investigated extensively. However, these studies have been conducted under ideal conditions, such as wind tunnels and computational environments, and limited studies have investigated the effects of plasma actuators in an actual environment. In this study, the flow control capability of a DBD-PA under natural and in-flight conditions was investigated via field flight tests using an unmanned aerial vehicle (UAV). The DBD-PA driving system was constructed with a small high-voltage power supply on a 2-m-span UAV. With the support of an autonomous flight system, the pitch angle gradually increased as the airspeed decreased, and the stall occurred from the cruise state. This flight procedure was conducted with the DBD-PA on or off, and 246 pairs of flights were operated. The results revealed that a flight state with a higher pitch angle and lower airspeed occurred when DBD-PA was switched on. In addition, the moment of stall was quantitatively determined from the flight log, and it was confirmed that the maximum pitch angle when DBD-PA was switched on tended to be larger than that when DBD-PA was switched off. These results indicate that flow control with a DBD-PA on a 2-m-span UAV was effective in natural and in-flight situations. Full article
(This article belongs to the Special Issue UAV Flight Testing)
Show Figures

Figure 1

Previous Issue
Next Issue
Back to TopTop