Next Issue
Volume 3, September
Previous Issue
Volume 3, March
 
 
From the start of 2016, the journal uses article numbers instead of page numbers to identify articles. If you are required to add page numbers to a citation, you can do with using a colon in the format [article number]:1–[last page], e.g. 10:1–20.

Aerospace, Volume 3, Issue 2 (June 2016) – 9 articles

  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list.
  • You may sign up for e-mail alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.
Order results
Result details
Section
Select all
Export citation of selected articles as:
348 KiB  
Article
On a Non-Symmetric Eigenvalue Problem Governing Interior Structural–Acoustic Vibrations
by Heinrich Voss
Aerospace 2016, 3(2), 17; https://doi.org/10.3390/aerospace3020017 - 17 Jun 2016
Cited by 1 | Viewed by 5948
Abstract
Small amplitude vibrations of a structure completely filled with a fluid are considered. Describing the structure by displacements and the fluid by its pressure field, the free vibrations are governed by a non-self-adjoint eigenvalue problem. This survey reports on a framework for taking [...] Read more.
Small amplitude vibrations of a structure completely filled with a fluid are considered. Describing the structure by displacements and the fluid by its pressure field, the free vibrations are governed by a non-self-adjoint eigenvalue problem. This survey reports on a framework for taking advantage of the structure of the non-symmetric eigenvalue problem allowing for a variational characterization of its eigenvalues. Structure-preserving iterative projection methods of the the Arnoldi and of the Jacobi–Davidson type and an automated multi-level sub-structuring method are reviewed. The reliability and efficiency of the methods are demonstrated by a numerical example. Full article
(This article belongs to the Special Issue Fluid-Structure Interactions)
Show Figures

Figure 1

7159 KiB  
Article
A Shape Memory Alloy Application for Compact Unmanned Aerial Vehicles
by Salvatore Ameduri, Antonio Concilio, Nunzia Favaloro and Lorenzo Pellone
Aerospace 2016, 3(2), 16; https://doi.org/10.3390/aerospace3020016 - 31 May 2016
Cited by 14 | Viewed by 10468
Abstract
Shape memory alloys materials, SMA, offer several advantages that designers can rely on such as the possibility of transmitting large forces and deformations, compactness, and the intrinsic capability to absorb loads. Their use as monolithic actuators, moreover, can lead to potential simplifications of [...] Read more.
Shape memory alloys materials, SMA, offer several advantages that designers can rely on such as the possibility of transmitting large forces and deformations, compactness, and the intrinsic capability to absorb loads. Their use as monolithic actuators, moreover, can lead to potential simplifications of the system, through a reduction of number of parts and the removal of many free play gaps among mechanics. For these reasons, technological aerospace research is focusing on this kind of technology more and more, even though fatigue life, performance degradation, and other issues are still open. In the work at hand, landing gear for unmanned aerial vehicles, UAV, is presented, integrated with shape memory alloys springs as actuation devices. A conceptual prototype has been realized to verify the system ability in satisfying specs, in terms of deployment and retraction capability. Starting from the proposed device working principle and the main design parameters identification, the design phase is faced, setting those parameters to meet weight, deployment angle, energy consumption, and available room requirements. Then, system modeling and performance prediction is performed and finally a correlation between numerical and experimental results is presented. Full article
(This article belongs to the Collection Unmanned Aerial Systems)
Show Figures

Graphical abstract

2470 KiB  
Article
Theoretical and Numerical Modeling of Acoustic Metamaterials for Aeroacoustic Applications
by Umberto Iemma
Aerospace 2016, 3(2), 15; https://doi.org/10.3390/aerospace3020015 - 26 May 2016
Cited by 21 | Viewed by 6678 | Correction
Abstract
The advent, during the first decade of the 21st century, of the concept of acoustic metamaterial has disclosed an incredible potential of development for breakthrough technologies. Unfortunately, the extension of the same concepts to aeroacoustics has turned out to be not a trivial [...] Read more.
The advent, during the first decade of the 21st century, of the concept of acoustic metamaterial has disclosed an incredible potential of development for breakthrough technologies. Unfortunately, the extension of the same concepts to aeroacoustics has turned out to be not a trivial task, because of the different structure of the governing equations, characterized by the presence of the background aerodynamic convection. Some of the approaches recently introduced to circumvent the problem are biased by a fundamental assumption that makes the actual realization of devices extremely unlikely: the metamaterial should guarantee an adapted background aerodynamic convection in order to modify suitably the acoustic field and obtain the desired effect, thus implying the porosity of the cloaking device. In the present paper, we propose an interpretation of the metamaterial design that removes this unlikely assumption, focusing on the identification of an aerodynamically-impermeable metamaterial capable of reproducing the surface impedance profile required to achieve the desired scattering abatement. The attention is focused on a moving obstacle impinged by an acoustic perturbation induced by a co-moving source. The problem is written in a frame of reference rigidly connected to the moving object to couple the convective wave equation in the hosting medium with the inertially-anisotropic wave operator within the cloak. The problem is recast in an integral form and numerically solved through a boundary-field element method. The matching of the local wave vector is used to derive a convective design of the metamaterial applicable to the specific problem analyzed. Preliminary numerical results obtained under the simplifying assumption of a uniform aerodynamic flow reveal a considerable enhancement of the masking capability of the convected design. The numerical method developed shows a remarkable computational efficiency, completing a simulation of the entire field in a few minutes on mid-end workstations. The results are re-interpreted in term of boundary impedance, assuming a locally-reacting behavior of the outer boundary of the cloaking layer. The formulation is currently being extended to the analysis of arbitrarily complex external flows in order to remove the limitation of the background uniform stream in the host. Full article
(This article belongs to the Special Issue Recent Advances in Aeroacoustics)
Show Figures

Graphical abstract

4175 KiB  
Article
Fixed-Wing UAV Attitude Estimation Using Single Antenna GPS Signal Strength Measurements
by Jason Gross, Yu Gu and Matthew Rhudy
Aerospace 2016, 3(2), 14; https://doi.org/10.3390/aerospace3020014 - 13 May 2016
Cited by 12 | Viewed by 7750
Abstract
This article considers a novel approach to using global positioning system (GPS) signal strength readings and estimated velocity vector for estimating the attitude of a small fixed-wing unmanned aerial vehicle (UAV). This approach has the benefit being able to estimate full position, velocity [...] Read more.
This article considers a novel approach to using global positioning system (GPS) signal strength readings and estimated velocity vector for estimating the attitude of a small fixed-wing unmanned aerial vehicle (UAV). This approach has the benefit being able to estimate full position, velocity and attitude states of a UAV using only the data from a single GPS receiver and antenna. Two different approaches for utilizing GPS signal strength within measurement updates for UAV attitude in a nonlinear Kalman filter are discussed and assessed using recorded UAV flight data. Comparisons of UAV pitch and roll estimates against measurements from a high-grade mechanical gyroscope are used to show that approximately 5° error with respect to both mean and standard-deviation on both axes is achievable. Full article
(This article belongs to the Collection Unmanned Aerial Systems)
Show Figures

Graphical abstract

4124 KiB  
Article
Suppression of Low-Frequency Shock Oscillations over Boundary Layers by Repetitive Laser Pulse Energy Deposition
by Akira Iwakawa, Tatsuro Shoda, Hoang Son Pham, Takahiro Tamba and Akihiro Sasoh
Aerospace 2016, 3(2), 13; https://doi.org/10.3390/aerospace3020013 - 27 Apr 2016
Cited by 10 | Viewed by 6984
Abstract
The effect of repetitive energy deposition on low Strouhal number oscillations of the shock wave induced by boundary-layer interaction over a cylinder-flare model was studied. The fluctuation of the energy deposition frequency was induced in the flow, because the bubble generated by the [...] Read more.
The effect of repetitive energy deposition on low Strouhal number oscillations of the shock wave induced by boundary-layer interaction over a cylinder-flare model was studied. The fluctuation of the energy deposition frequency was induced in the flow, because the bubble generated by the energy deposition flowed downstream along the surface repeatedly. The region before the bubble size was affected by the energy deposition directly, so the fluctuation frequency was equal to the energy deposition frequency. However, the flare shock behavior at a position farther from the surface than the bubble size was also affected strongly by the energy deposition. For low-frequency unsteadiness and the effect of energy deposition on its unsteadiness, two categories have been observed. In the relatively small flare angle case, the flare shock was oscillated owing to the fluctuation induced by the boundary-layer interaction at the shock foot, and its oscillation occurred at 2.1 kHz with a small amplitude. The amplitude of this oscillation was decreased by highly repetitive energy depositions, and its amplitude could not be detected at a highly repetitive energy deposition. In the longer cylinder section case, the region of the shock-wave interaction was widened, and the amplitude of the flare shock oscillation was increased. In this case, the amplitude drastically decreased because of energy deposition. Full article
(This article belongs to the Special Issue Feature Papers in Aerospace)
Show Figures

Graphical abstract

2376 KiB  
Article
Experimental Aeroelastic Models Design and Wind Tunnel Testing for Correlation with New Theory
by Deman Tang and Earl H. Dowell
Aerospace 2016, 3(2), 12; https://doi.org/10.3390/aerospace3020012 - 14 Apr 2016
Cited by 25 | Viewed by 9638
Abstract
Several examples of experimental model designs, wind tunnel tests and correlation with new theory are presented in this paper. The goal is not only to evaluate a new theory, new computational method or new aeroelastic phonomenon, but also to provide new insights into [...] Read more.
Several examples of experimental model designs, wind tunnel tests and correlation with new theory are presented in this paper. The goal is not only to evaluate a new theory, new computational method or new aeroelastic phonomenon, but also to provide new insights into nonlinear aeroelastic phenomena, flutter, limit cycle oscillation (LCO) and gust response. Full article
(This article belongs to the Special Issue Innovations in Wind Tunnel Testing)
Show Figures

Graphical abstract

5987 KiB  
Article
A Six Degrees of Freedom Dynamic Wire-Driven Traverse
by Thomas J. Lambert, Bojan Vukasinovic and Ari Glezer
Aerospace 2016, 3(2), 11; https://doi.org/10.3390/aerospace3020011 - 14 Apr 2016
Cited by 23 | Viewed by 8153
Abstract
A novel support mechanism for a wind tunnel model is designed, built, and demonstrated on an aerodynamic platform undergoing dynamic maneuvers, tested with periodic motions up to 20 Hz. The platform is supported by a 6-DOF (six degrees of freedom) traverse that utilizes [...] Read more.
A novel support mechanism for a wind tunnel model is designed, built, and demonstrated on an aerodynamic platform undergoing dynamic maneuvers, tested with periodic motions up to 20 Hz. The platform is supported by a 6-DOF (six degrees of freedom) traverse that utilizes eight thin wires, each mounted to a servo motor with an in-line load cell to accurately monitor or control the platform motion and force responses. The system is designed such that simultaneous control of the servo motors effects motion within ±50 mm translations, ±15° pitch, ±9° yaw, and ±8° roll at lower frequencies. The traverse tracks a desired trajectory and resolves the induced forces on the platform at 1 kHz. The effected motion of the platform is measured at 0.6 kHz with a motion capture system, which utilizes six near-infrared (NIR) cameras for full spatial and temporal resolution of the platform motion, which is used for feedback control. The traverse allows different platform model geometries to be tested, and the present work demonstrates its capabilities on an axisymmetric bluff body. Programmable timed outputs are synchronized relative to the model motion and can be used for triggering external systems and processes. In the present study, particle image velocimetry (PIV) is used to characterize the realized wakes of the platform undergoing canonical motions that are effected by this new wind tunnel traverse. Full article
(This article belongs to the Special Issue Innovations in Wind Tunnel Testing)
Show Figures

Graphical abstract

8364 KiB  
Article
Vertical Wind Tunnel for Prediction of Rocket Flight Dynamics
by Hoani Bryson, Hans Philipp Sültrop, George Buchanan, Christopher Hann, Malcolm Snowdon, Avinash Rao, Adam Slee, Kieran Fanning, David Wright, Jason McVicar, Brett Clark, Graeme Harris and Xiao Qi Chen
Aerospace 2016, 3(2), 10; https://doi.org/10.3390/aerospace3020010 - 29 Mar 2016
Cited by 4 | Viewed by 9910
Abstract
A customized vertical wind tunnel has been built by the University of Canterbury Rocketry group (UC Rocketry). This wind tunnel has been critical for the success of UC Rocketry as it allows the optimization of avionics and control systems before flight. This paper [...] Read more.
A customized vertical wind tunnel has been built by the University of Canterbury Rocketry group (UC Rocketry). This wind tunnel has been critical for the success of UC Rocketry as it allows the optimization of avionics and control systems before flight. This paper outlines the construction of the wind tunnel and includes an analysis of flow quality including swirl. A minimal modelling methodology for roll dynamics is developed that can extrapolate wind tunnel behavior at low wind speeds to much higher velocities encountered during flight. The models were shown to capture the roll flight dynamics in two rocket launches with mean roll angle errors varying from 0.26° to 1.5° across the flight data. The identified model parameters showed consistent and predictable variations over both wind tunnel tests and flight, including canard–fin interaction behavior. These results demonstrate that the vertical wind tunnel is an important tool for the modelling and control of sounding rockets. Full article
(This article belongs to the Special Issue Innovations in Wind Tunnel Testing)
Show Figures

Graphical abstract

721 KiB  
Communication
Semi-Empirical Prediction of Airfoil Hysteresis
by Lance W. Traub
Aerospace 2016, 3(2), 9; https://doi.org/10.3390/aerospace3020009 - 24 Mar 2016
Cited by 10 | Viewed by 9395
Abstract
A semi-empirical method is presented to estimate the angular excursion and the lift loss associated with static hysteresis on an airfoil. Wind tunnel data of various airfoils is used to define and validate the methodology. The resulting equation provides a relationship between the [...] Read more.
A semi-empirical method is presented to estimate the angular excursion and the lift loss associated with static hysteresis on an airfoil. Wind tunnel data of various airfoils is used to define and validate the methodology. The resulting equation provides a relationship between the size of the hysteresis loop and characteristics of the airfoil. Comparisons of the equation with experiment show encouraging agreement both in terms of the magnitude of the lift loss and the extent of the loop. Full article
(This article belongs to the Special Issue Feature Papers in Aerospace)
Show Figures

Graphical abstract

Previous Issue
Next Issue
Back to TopTop